it from the shuffle pattern matching logic.
Also cleaned up variable names, comments, etc. No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218152 91177308-0d34-0410-b5e6-96231b3b80d8
In r217636, the value stored in KernelInfo.Num[VS]GPRSs was changed from
the highest GPR index used to the number of gprs in order to be
consistent with the name of the variable.
The code writing the config values still assumed that the value in this
variable was the highest GPR index used, which caused the compiler to
over report the number of GPRs being used.
https://bugs.freedesktop.org/show_bug.cgi?id=84089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218150 91177308-0d34-0410-b5e6-96231b3b80d8
lowering to support both anyext and zext and to custom lower for many
different microarchitectures.
Using this allows us to get *exactly* the right code for zext and anyext
shuffles in all the vector sizes. For v16i8, the improvement is *huge*.
The new SSE2 test case added I refused to add before this because it was
sooooo muny instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218143 91177308-0d34-0410-b5e6-96231b3b80d8
The heuristic used by DAGCombine to form FMAs checks that the FMUL has only one
use, but this is overly-conservative on some systems. Specifically, if the FMA
and the FADD have the same latency (and the FMA does not compete for resources
with the FMUL any more than the FADD does), there is no need for the
restriction, and furthermore, forming the FMA leaving the FMUL can still allow
for higher overall throughput and decreased critical-path length.
Here we add a new TLI callback, enableAggressiveFMAFusion, false by default, to
elide the hasOneUse check. This is enabled for PowerPC by default, as most
PowerPC systems will benefit.
Patch by Olivier Sallenave, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218120 91177308-0d34-0410-b5e6-96231b3b80d8
to undef lanes as well as defined widenable lanes. This dramatically
improves the lowering we use for undef-shuffles in a zext-ish pattern
for SSE2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218115 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles that are zext-ing.
Not a lot to see here; the undef lane variant is better handled with
pshufd, but this improves the actual zext pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218112 91177308-0d34-0410-b5e6-96231b3b80d8
to the new vector shuffle lowering code.
This allows us to emit PMOVZX variants consistently for patterns where
it is a viable lowering. This instruction is both fast and allows us to
fold loads into it. This only hooks the new lowering up for i16 and i8
element widths, mostly so I could manage the change to the tests. I'll
add the i32 one next, although it is significantly less interesting.
One thing to note is that we already had some tests for these patterns
but those tests had far less horrible instructions. The problem is that
those tests weren't checking the strict start and end of the instruction
sequence. =[ As a consequence something changed in the lowering making
us generate *TERRIBLE* code for these patterns in SSE2 through SSSE3.
I've consolidated all of the tests and spelled out the madness that we
currently emit for these shuffles. I'm going to try to figure out what
has gone wrong here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218102 91177308-0d34-0410-b5e6-96231b3b80d8
The fix is slightly different then x86 (see r216117) because the number of values
attached to a return can vary even for a single returned value (e.g., f64 yields
two returned values).
<rdar://problem/18352998>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218076 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch was originally in D5304 (I could not find a way to reopen that revision).
It was accepted, commited and broke the build bots because the overloading of
the constructor of ArrayRef for braced initializer lists is not supported by all
toolchains. I then reverted it, and propose this fixed version that uses a plain
C array instead in makeDMB (that array is then converted implicitly to an
ArrayRef, but that is not behind an ifdef). Could someone confirm me whether
initialization lists for plain C arrays are supported by every toolchain used
to build llvm ? Otherwise I can just initialize the array in the old way:
args[0] = ...; .. ; args[5] = ...;
Below is the description of the original patch:
```
I had only tested this code for ARMv7 and ARMv8. This patch adds several
fallback paths if the processor does not support dmb ish:
- dmb sy if a cortex-M with support for dmb
- mcr p15, #0, r0, c7, c10, #5 for ARMv6 (special instruction equivalent to a DMB)
These fallback paths were chosen based on the code for fence seq_cst.
Thanks to luqmana for having noticed this bug.
```
Test Plan: Added more cases to atomic-load-store.ll + make check-all
Reviewers: jfb, t.p.northover, luqmana
Subscribers: llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D5386
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218066 91177308-0d34-0410-b5e6-96231b3b80d8
There is no purpose in using it for single-input shuffles as
pshufd is just as fast and doesn't tie the two operands. This removes
a substantial amount of wrong-domain blend operations in SSSE3 mode. It
also completes the usage of PALIGNR for integer shuffles and addresses
one of the test cases Quentin hit with the new vector shuffle lowering.
There is still the question of whether and when to use this for floating
point shuffles. It is faster than shufps or shufpd but in the integer
domain. I don't yet really have a good heuristic here for when to use
this instruction for floating point vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218038 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The N32/N64 ABI's return f128 values in $f0 and $f2 for hard-float and $v0 and
$a0 for soft-float. The registers used in the soft-float case differ from the
usual $v0, and $v1 specified for return values.
Both cases were previously handled by duplicating the CCState::AnalyzeReturn()
and CCState::AnalyzeCallReturn() functions and modifying them to delegate to
a different assignment function for f128 and further replace the register type
for the hard-float case. There is a simpler way to do both of these.
We now use the common functions and select an initial assignment function based
on whether the original type is f128 or not. We then handle the hard-float case
using CCBitConvertToType<>.
No functional change.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5269
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218036 91177308-0d34-0410-b5e6-96231b3b80d8
When folding the intrinsic flag into the branch or select we also have to
consider the fact if the intrinsic got simplified, because it changes the
flag we have to check for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218034 91177308-0d34-0410-b5e6-96231b3b80d8
Small optimization in 'simplifyAddress'. When the offset cannot be encoded in
the load/store instruction, then we need to materialize the address manually.
The add instruction can encode a wider range of immediates than the load/store
instructions. This change tries to fold the offset into the add instruction
first before materializing the offset in a register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218031 91177308-0d34-0410-b5e6-96231b3b80d8
The 'AND' instruction could be used to mask out the lower 32 bits of a register.
If this is done inside an address computation we might be able to fold the
instruction into the memory instruction itself.
and x1, x1, #0xffffffff ---> ldrb x0, [x0, w1, uxtw]
ldrb x0, [x0, x1]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218030 91177308-0d34-0410-b5e6-96231b3b80d8
Certain directives are unsupported on Windows (some of which could/should be
supported). We would not diagnose the use but rather crash during the emission
as we try to access the Target Streamer. Add an assertion to prevent creating a
NULL reference (which is not permitted under C++) as well as a test to ensure
that we can diagnose the disabled directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218014 91177308-0d34-0410-b5e6-96231b3b80d8
PALIGNR. This just adds it to the v8i16 and v16i8 lowering steps where
it is completely unmatched. It also introduces the logic for detecting
rotation shuffle masks even in the presence of single input or blend
masks and arbitrarily undef lanes.
I've added fairly comprehensive tests for the matching logic in v8i16
because the tests at that size are much easier to write and manage.
I've not checked the SSE2 code generated for these tests because the
code is *horrible*. It is absolute madness. Testing it will just make
the test brittle without giving any interesting improvements in the
correctness confidence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218013 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than relying on support for a specific directive to determine if we are
targeting MachO, explicitly check the output format.
As an additional bonus, cleanup the caret diagnostic for the non-MachO case and
avoid the spurious error caused by not discarding the statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218012 91177308-0d34-0410-b5e6-96231b3b80d8
shim between the TargetTransformInfo immutable pass and the Subtarget
via the TargetMachine and Function. Migrate a single call from
BasicTargetTransformInfo as an example and provide shims where TargetMachine
begins taking a Function to determine the subtarget.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218004 91177308-0d34-0410-b5e6-96231b3b80d8
For PPC targets, FastISel does not take the sign extension information into account when selecting return instructions whose operands are constants. A consequence of this is that the return of boolean values is not correct. This patch fixes the problem by evaluating the sign extension information also for constants, forwarding this information to PPCMaterializeInt which takes this information to drive the sign extension during the materialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217993 91177308-0d34-0410-b5e6-96231b3b80d8
Emit an optimized instruction sequence for sdiv by power-of-2 depending on the
exact flag.
This fixes rdar://problem/18224511.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217986 91177308-0d34-0410-b5e6-96231b3b80d8
Try to fold the multiply into the add/sub or logical operations (when
possible).
This is related to rdar://problem/18369687.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217978 91177308-0d34-0410-b5e6-96231b3b80d8
Teach 'computeAddress' to also fold multiplies into the address computation
(when possible).
This fixes rdar://problem/18369443.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217977 91177308-0d34-0410-b5e6-96231b3b80d8
It is breaking the build on the buildbots but works fine on my machine, I revert
while trying to understand what happens (it appears to depend on the compiler used
to build, I probably used a C++11 feature that is not perfectly supported by some
of the buildbots).
This reverts commit feb3176c4d006f99af8b40373abd56215a90e7cc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217973 91177308-0d34-0410-b5e6-96231b3b80d8
This takes advanatage of the CBZ and CBNZ instruction to further optimize the
common null check pattern into a single instruction.
This is related to rdar://problem/18358882.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217972 91177308-0d34-0410-b5e6-96231b3b80d8
Since read2 / write2 are emitted for 4-byte aligned 8-byte
accesses, these are seen by the scheduler.
The DAG scheduler is semi-deprecated, so just
ignore these for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217969 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the last two missing floating-point condition codes (FCMP_UEQ and
FCMP_ONE) also to the branch selection. In these two cases an additonal branch
instruction is required.
This also adds unit tests to checks all the different condition codes.
This is related o rdar://problem/18358882.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217966 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I had only tested this code for ARMv7 and ARMv8. This patch adds several
fallback paths if the processor does not support dmb ish:
- dmb sy if a cortex-M with support for dmb
- mcr p15, #0, r0, c7, c10, #5 for ARMv6 (special instruction equivalent to a DMB)
These fallback paths were chosen based on the code for fence seq_cst.
Thanks to luqmana for having noticed this bug.
Test Plan: Added more cases to atomic-load-store.ll + make check-all
Reviewers: jfb, t.p.northover, luqmana
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5304
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217965 91177308-0d34-0410-b5e6-96231b3b80d8
Only 1 decimal place should be printed for inline immediates.
Other constants should be hex constants.
Does not include f64 tests because folding those inline
immediates currently does not work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217964 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions are now generally selected to the e64 forms originally,
and shrunk down later. Rename foldOperands to legalizeOperands,
since that's really most of what it tries to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217959 91177308-0d34-0410-b5e6-96231b3b80d8
This required a new hook called hasLoadLinkedStoreConditional to know whether
to expand atomics to LL/SC (ARM, AArch64, in a future patch Power) or to
CmpXchg (X86).
Apart from that, the new code in AtomicExpandPass is mostly moved from
X86AtomicExpandPass. The main result of this patch is to get rid of that
pass, which had lots of code duplicated with AtomicExpandPass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217928 91177308-0d34-0410-b5e6-96231b3b80d8
ADDS/SUBS unless it's safe to clobber the condition flags.
If the merged instructions are in a range where the CPSR is live,
e.g. between a CMP -> Bcc, we can't safely materialize a new base
register.
This problem is quite rare, I couldn't come up with a test case and I've
never actually seen this happen in the tests I'm running - there is a
potential trigger for this in LNT/oggenc (spills being inserted between
a CMP/Bcc), but at the moment this isn't being merged. I'll try to
reduce that into a small test case once I've committed my upcoming patch
to make merging less conservative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217881 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Changed error messages to be more informative and to resemble other clang/llvm error messages (first letter is lower case, no ending punctuation) and updated corresponding tests.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5065
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217873 91177308-0d34-0410-b5e6-96231b3b80d8
objects. There were a few FIXMEs in ARMAsmBackend.cpp suggesting the class
definitions should be in a separate file. Starting with ARMAsmBackend, the
class definition has been put in a header file, and #includes reduced. Each
sub-type of ARMAsmBackend is now in its own header file.
Derived types have been painted with a different color of bike-shed:
s/DarwinARMAsmBackend/ARMAsmBackendDarwin/g
s/ARMWinCOFFAsmBackend/ARMAsmBackendWinCOFF/g
s/ELFARMAsmBackend/ARMAsmBackendELF/g
Finally, clang-format has been run across ARMAsmBackend.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217866 91177308-0d34-0410-b5e6-96231b3b80d8
the blend that is matched by this are "used" in any sense, and so any
build_vector or other nodes feeding these will already drop other lanes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217855 91177308-0d34-0410-b5e6-96231b3b80d8
matching. This design just fundamentally didn't work because ADDSUB is
available prior to any legal lowerings of BLENDI nodes. Instead, we have
a dedicated ADDSUB synthetic ISD node which is pattern matched trivially
into the instructions. These nodes are then recognized by both the
existing and a trivial new lowering combine in the backend. Removing
these patterns required adding 2 missing shuffle masks to the DAG
combine, without which tests would have failed. Added the masks and
a helpful assert as well to catch if anything ever goes wrong here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217851 91177308-0d34-0410-b5e6-96231b3b80d8
that we don't use VSELECT and directly emit an addsub synthetic node.
Also remove a stale comment referencing VSELECT.
The test case is updated to use 'core2' which only has SSE3, not SSE4.1,
and it still passes. Previously it would not because we lacked
sufficient blend support to legalize the VSELECT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217849 91177308-0d34-0410-b5e6-96231b3b80d8
ADDSUBPD nodes out of blends of adds and subs.
This allows us to actually form these instructions with SSE3 rather than
only forming them when we had both SSE3 for the ADDSUB instructions and
SSE4.1 for the blend instructions. ;] Kind-of important.
I've adjusted the CPU requirements on one of the tests to demonstrate
this kicking in nicely for an SSE3 cpu configuration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217848 91177308-0d34-0410-b5e6-96231b3b80d8
Allow handling of vectors during return lowering at least for little endian machines.
This was restricted in r208200 to fix it for big endian machines (according to
the comment), but it also disabled it for little endian too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217846 91177308-0d34-0410-b5e6-96231b3b80d8
This lowers frem to a runtime libcall inside fast-isel.
The test case also checks the CallLoweringInfo bug that was exposed by this
change.
This fixes rdar://problem/18342783.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217833 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the last two missing fcmp condition codes: UEQ and ONE.
This fixes rdar://problem/18341575.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217823 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Expand list of supported targets for Mips to include mips32 r1.
Previously it only include r2. More patches are coming where there is
a difference but in the current patches as pushed upstream, r1 and r2
are equivalent.
Test Plan:
simplestorefp1.ll
add new build bots at mips to test this flavor at both -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5306
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217821 91177308-0d34-0410-b5e6-96231b3b80d8
introducing a synthetic X86 ISD node representing this generic
operation.
The relevant patterns for mapping these nodes into the concrete
instructions are also added, and a gnarly bit of C++ code in the
target-specific DAG combiner is replaced with simple code emitting this
primitive.
The next step is to generically combine blends of adds and subs into
this node so that we can drop the reliance on an SSE4.1 ISD node
(BLENDI) when matching an SSE3 feature (ADDSUB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217819 91177308-0d34-0410-b5e6-96231b3b80d8
On MachO, and MachO only, we cannot have a truly empty function since that
breaks the linker logic for atomizing the section.
When we are emitting a frame pointer, the presence of an unreachable will
create a cfi instruction pointing past the last instruction. This is perfectly
fine. The FDE information encodes the pc range it applies to. If some tool
cannot handle this, we should explicitly say which bug we are working around
and only work around it when it is actually relevant (not for ELF for example).
Given the unreachable we could omit the .cfi_def_cfa_register, but then
again, we could also omit the entire function prologue if we wanted to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217801 91177308-0d34-0410-b5e6-96231b3b80d8
Peephole optimization was folding MOVSDrm, which is a zero-extending double
precision floating point load, into ADDPDrr, which is a SIMD add of two packed
double precision floating point values.
(before)
%vreg21<def> = MOVSDrm <fi#0>, 1, %noreg, 0, %noreg; mem:LD8[%7](align=16)(tbaa=<badref>) VR128:%vreg21
%vreg23<def,tied1> = ADDPDrr %vreg20<tied0>, %vreg21; VR128:%vreg23,%vreg20,%vreg21
(after)
%vreg23<def,tied1> = ADDPDrm %vreg20<tied0>, <fi#0>, 1, %noreg, 0, %noreg; mem:LD8[%7](align=16)(tbaa=<badref>) VR128:%vreg23,%vreg20
X86InstrInfo::foldMemoryOperandImpl already had the logic that prevented this
from happening. However the check wasn't being conducted for loads from stack
objects. This commit factors out the logic into a new function and uses it for
checking loads from stack slots are not zero-extending loads.
rdar://problem/18236850
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217799 91177308-0d34-0410-b5e6-96231b3b80d8
Add some more tests to make sure better operand
choices are still made. Leave some cases that seem
to have no reason to ever be e64 alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217789 91177308-0d34-0410-b5e6-96231b3b80d8
when SSE4.1 is available.
This removes a ton of domain crossing from blend code paths that were
ending up in the floating point code path.
This is just the tip of the iceberg though. The real switch is for
integer blend lowering to more actively rely on this instruction being
available so we don't hit shufps at all any longer. =] That will come in
a follow-up patch.
Another place where we need better support is for using PBLENDVB when
doing so avoids the need to have two complementary PSHUFB masks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217767 91177308-0d34-0410-b5e6-96231b3b80d8
instructions from the relevant shuffle patterns.
This is the last tweak I'm aware of to generate essentially perfect
v4f32 and v2f64 shuffles with the new vector shuffle lowering up through
SSE4.1. I'm sure I've missed some and it'd be nice to check since v4f32
is amenable to exhaustive exploration, but this is all of the tricks I'm
aware of.
With AVX there is a new trick to use the VPERMILPS instruction, that's
coming up in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217761 91177308-0d34-0410-b5e6-96231b3b80d8
instructions when it finds an appropriate pattern.
These are lovely instructions, and its a shame to not use them. =] They
are fast, and can hand loads folded into their operands, etc.
I've also plumbed the comment shuffle decoding through the various
layers so that the test cases are printed nicely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217758 91177308-0d34-0410-b5e6-96231b3b80d8
AVX is available, and generally tidy up things surrounding UNPCK
formation.
Originally, I was thinking that the only advantage of PSHUFD over UNPCK
instruction variants was its free copy, and otherwise we should use the
shorter encoding UNPCK instructions. This isn't right though, there is
a larger advantage of being able to fold a load into the operand of
a PSHUFD. For UNPCK, the operand *must* be in a register so it can be
the second input.
This removes the UNPCK formation in the target-specific DAG combine for
v4i32 shuffles. It also lifts the v8 and v16 cases out of the
AVX-specific check as they are potentially replacing multiple
instructions with a single instruction and so should always be valuable.
The floating point checks are simplified accordingly.
This also adjusts the formation of PSHUFD instructions to attempt to
match the shuffle mask to one which would fit an UNPCK instruction
variant. This was originally motivated to allow it to match the UNPCK
instructions in the combiner, but clearly won't now.
Eventually, we should add a MachineCombiner pass that can form UNPCK
instructions post-RA when the operand is known to be in a register and
thus there is no loss.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217755 91177308-0d34-0410-b5e6-96231b3b80d8
'punpckhwd' instructions when suitable rather than falling back to the
generic algorithm.
While we could canonicalize to these patterns late in the process, that
wouldn't help when the freedom to use them is only visible during
initial lowering when undef lanes are well understood. This, it turns
out, is very important for matching the shuffle patterns that are used
to lower sign extension. Fixes a small but relevant regression in
gcc-loops with the new lowering.
When I changed this I noticed that several 'pshufd' lowerings became
unpck variants. This is bad because it removes the ability to freely
copy in the same instruction. I've adjusted the widening test to handle
undef lanes correctly and now those will correctly continue to use
'pshufd' to lower. However, this caused a bunch of churn in the test
cases. No functional change, just churn.
Both of these changes are part of addressing a general weakness in the
new lowering -- it doesn't sufficiently leverage undef lanes. I've at
least a couple of patches that will help there at least in an academic
sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217752 91177308-0d34-0410-b5e6-96231b3b80d8
These are super simple. They even take precedence over crazy
instructions like INSERTPS because they have very high throughput on
modern x86 chips.
I still have to teach the integer shuffle variants about this to avoid
so many domain crossings. However, due to the particular instructions
available, that's a touch more complex and so a separate patch.
Also, the backend doesn't seem to realize it can commute blend
instructions by negating the mask. That would help remove a number of
copies here. Suggestions on how to do this welcome, it's an area I'm
less familiar with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217744 91177308-0d34-0410-b5e6-96231b3b80d8
support transforming the forms from the new vector shuffle lowering to
use 'movddup' when appropriate.
A bunch of the cases where we actually form 'movddup' don't actually
show up in the test results because something even later than DAG
legalization maps them back to 'unpcklpd'. If this shows back up as
a performance problem, I'll probably chase it down, but it is at least
an encoded size loss. =/
To make this work, also always do this canonicalizing step for floating
point vectors where the baseline shuffle instructions don't provide any
free copies of their inputs. This also causes us to canonicalize
unpck[hl]pd into mov{hl,lh}ps (resp.) which is a nice encoding space
win.
There is one test which is "regressed" by this: extractelement-load.
There, the test case where the optimization it is testing *fails*, the
exact instruction pattern which results is slightly different. This
should probably be fixed by having the appropriate extract formed
earlier in the DAG, but that would defeat the purpose of the test.... If
this test case is critically important for anyone, please let me know
and I'll try to work on it. The prior behavior was actually contrary to
the comment in the test case and seems likely to have been an accident.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217738 91177308-0d34-0410-b5e6-96231b3b80d8
... Just make sure we check uses first so we see the kill first. It
turns out ignoring defs gives some pretty nasty runtime failures.
I'm certain this is the fix but I'm still reducing a testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217735 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the logical ops selection to also support non-native types such as i1,
i8, and i16.
Fixes rdar://problem/18330589.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217732 91177308-0d34-0410-b5e6-96231b3b80d8
Vector MUL/MLAs have tied operands, which gives us extra constraints
that we currently can't handle. Instead of silently doing the wrong
thing, remove support to be readded later properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217690 91177308-0d34-0410-b5e6-96231b3b80d8
Defs are seen before uses, so a def without the kill flag doesn't necessarily
mean that the register is not killed on that instruction. It may be killed
in a later use operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217689 91177308-0d34-0410-b5e6-96231b3b80d8
Cross-class copies being expensive is actually a trait of the microarchitecture, but as I haven't yet seen an example of a microarchitecture where they're cheap it seems best to just enable this by default, covering the non-mcpu build case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217674 91177308-0d34-0410-b5e6-96231b3b80d8
Inline asm may specify 'U' and 'X' constraints to print a 'u' for an
update-form memory reference, or an 'x' for an indexed-form memory
reference. However, these are really only useful in GCC internal code
generation. In inline asm the operand of the memory constraint is
typically just a register containing the address, so 'U' and 'X' make
no sense.
This patch quietly accepts 'U' and 'X' in inline asm patterns, but
otherwise does nothing. If we ever unexpectedly see a non-register,
we'll assert and sort it out afterwards.
I've added a new test for these constraints; the test case should be
used for other asm-constraints changes down the road.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217622 91177308-0d34-0410-b5e6-96231b3b80d8
r189189 implemented AVX512 unpack by essentially performing a 256-bit unpack
between the low and the high 256 bits of src1 into the low part of the
destination and another unpack of the low and high 256 bits of src2 into the
high part of the destination.
I don't think that's how unpack works. AVX512 unpack simply has more 128-bit
lanes but other than it works the same way as AVX. So in each 128-bit lane,
we're always interleaving certain parts of both operands rather different
parts of one of the operands.
E.g. for this:
__v16sf a = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
__v16sf b = { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 };
__v16sf c = __builtin_shufflevector(a, b, 0, 8, 1, 9, 4, 12, 5, 13, 16,
24, 17, 25, 20, 28, 21, 29);
we generated punpcklps (notice how the elements of a and b are not interleaved
in the shuffle). In turn, c was set to this:
0 16 1 17 4 20 5 21 8 24 9 25 12 28 13 29
Obviously this should have just returned the mask vector of the shuffle
vector.
I mostly reverted this change and made sure the original AVX code worked
for 512-bit vectors as well.
Also updated the tests because they matched the logic from the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217602 91177308-0d34-0410-b5e6-96231b3b80d8
Refactored the R600_LDS_1A2D class a bit to get it to actually work.
It seemed to be previously unused and broken.
We also have to disable the conversion to the noret variant for now in
R600ISelLowering because the getLDSNoRetOp method only handles 1A1D LDS ops.
Someone can feel free to modify the AMDGPU::getLDSNoRetOp method to
work for more than 1A1D variants of LDS operations. It's being left as a
future TODO for now.
Signed-off-by: Aaron Watry <awatry at gmail.com>
Reviewed-by: Matt Arsenault <matthew.arsenault@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217596 91177308-0d34-0410-b5e6-96231b3b80d8
This was only present for SI before.
Cayman may still be missing, but I am unable to test that currently.
v2: Don't create atomicrmw max tests in separate file
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Matt Arsenault <matthew.arsenault@amd.com>
CC: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217589 91177308-0d34-0410-b5e6-96231b3b80d8
Need to convert the 64 element offset into bytes, not just the element
size like the normal case instructions.
Noticed by inspection. This can't be hit now because
st64 instructions aren't emitted during instruction selection,
and the post-RA scheduler isn't enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217560 91177308-0d34-0410-b5e6-96231b3b80d8
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217548 91177308-0d34-0410-b5e6-96231b3b80d8
The increase of the interleave factor to 4 has side-effects
like performance losses eg. due to reminder loops being executed
more frequently and may increase code size. It requires more
analysis and careful heuristic tuning. Expect double digit gains
in small benchmarks like lowercase.c and losses in puzzle.c.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217540 91177308-0d34-0410-b5e6-96231b3b80d8
This adds target specific support for using the PBQP register allocator on the
AArch64, for the A57 cpu.
By default, the PBQP allocator is not used, unless explicitely required
on the command line with "-aarch64-pbqp".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217504 91177308-0d34-0410-b5e6-96231b3b80d8
using static relocation model and small code model.
Summary: currently we generate GOT based relocations for weak symbol
references regardless of the underlying relocation model. This should
be change so that in static relocation model we use a constant pool
load instead.
Patch from: Keith Walker
Reviewers: Renato Golin, Tim Northover
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217503 91177308-0d34-0410-b5e6-96231b3b80d8
The only Thumb-1 multi-store capable of using LR is the PUSH instruction, which
translates to STMDB, so we shouldn't convert STMIAs.
Patch by Sergey Dmitrouk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217498 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures the inline assembly register constraints are properly recognised in
TargetLowering::getRegForInlineAsmConstraint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217479 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds aliases for the sync instruction (synciobdma,
syncs, syncw, syncws) which are used by the Octeon CPU.
Reviewed by D. Sanders
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217477 91177308-0d34-0410-b5e6-96231b3b80d8
This is a first pass at a scheduling model for Jaguar.
It's structured largely on the existing SandyBridge and SLM sched models.
Using this model, in addition to turning on the PostRA scheduler, results in
some perf wins on internal and 3rd party benchmarks. There's not much difference
in LLVM's test-suite benchmarking subset of tests.
Differential Revision: http://reviews.llvm.org/D5229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217457 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is used to reset the assembler options to their initial values.
Assembly programmers use it in conjunction with the ".set mipsX" directives.
This patch depends on the .set push/pop directive (http://reviews.llvm.org/D4821).
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4957
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217438 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The GPR size is more a property of the subtarget than that of the ABI so move
this information to the MipsSubtarget.
No functional change.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5009
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217436 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In AT&T annotation for both x86_64 and x32 calls should be printed as
callq in assembly. It's only a matter of correct mnemonic, object output
is ok.
Test Plan: trivial test added
Reviewers: nadav, dschuff, craig.topper
Subscribers: llvm-commits, zinovy.nis
Differential Revision: http://reviews.llvm.org/D5213
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217435 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These directives are used to save the current assembler options (in the case of ".set push") and restore the previously saved options (in the case of ".set pop").
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4821
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217432 91177308-0d34-0410-b5e6-96231b3b80d8
When compiling without SSE2, isTruncStoreLegal(F64, F32) would return Legal, whereas with SSE2 it would return Expand. And since the Target doesn't seem to actually handle a truncstore for double -> float, it would just output a store of a full double in the space for a float hence overwriting other bits on the stack.
Patch by Luqman Aden!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217410 91177308-0d34-0410-b5e6-96231b3b80d8
Assert in scheduler from an inserted copy_to_regclass from
a constant.
This only seems to break sometimes when a constant initializer
address is forced into VGPRs in a non-entry block. No test
since the only case I've managed to hit only happens with a future
patch, and that case will also not be a problem once scalar instructions
are used in non-entry blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217380 91177308-0d34-0410-b5e6-96231b3b80d8
Only handles LDS atomics for now, and will be used
to replace atomics with no uses with the no return
versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217378 91177308-0d34-0410-b5e6-96231b3b80d8
I hadn't actually run all the tests yet and these combines have somewhat
surprisingly far reaching effects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217333 91177308-0d34-0410-b5e6-96231b3b80d8
support for MOVDDUP which is really important for matrix multiply style
operations that do lots of non-vector-aligned load and splats.
The original motivation was to add support for MOVDDUP as the lack of it
regresses matmul_f64_4x4 by 5% or so. However, all of the rules here
were somewhat suspicious.
First, we should always be using the floating point domain shuffles,
regardless of how many copies we have to make as a movapd is *crazy*
faster than the domain switching cost on some chips. (Mostly because
movapd is crazy cheap.) Because SHUFPD can't do the copy-for-free trick
of the PSHUF instructions, there is no need to avoid canonicalizing on
UNPCK variants, so do that canonicalizing. This also ensures we have the
chance to form MOVDDUP. =]
Second, we assume SSE2 support when doing any vector lowering, and given
that we should just use UNPCKLPD and UNPCKHPD as they can operate on
registers or memory. If vectors get spilled or come from memory at all
this is going to allow the load to be folded into the operation. If we
want to optimize for encoding size (the only difference, and only
a 2 byte difference) it should be done *much* later, likely after RA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217332 91177308-0d34-0410-b5e6-96231b3b80d8
parsing (and latent bug in the instruction definitions).
This is effectively a revert of r136287 which tried to address
a specific and narrow case of immediate operands failing to be accepted
by x86 instructions with a pretty heavy hammer: it introduced a new kind
of operand that behaved differently. All of that is removed with this
commit, but the test cases are both preserved and enhanced.
The core problem that r136287 and this commit are trying to handle is
that gas accepts both of the following instructions:
insertps $192, %xmm0, %xmm1
insertps $-64, %xmm0, %xmm1
These will encode to the same byte sequence, with the immediate
occupying an 8-bit entry. The first form was fixed by r136287 but that
broke the prior handling of the second form! =[ Ironically, we would
still emit the second form in some cases and then be unable to
re-assemble the output.
The reason why the first instruction failed to be handled is because
prior to r136287 the operands ere marked 'i32i8imm' which forces them to
be sign-extenable. Clearly, that won't work for 192 in a single byte.
However, making thim zero-extended or "unsigned" doesn't really address
the core issue either because it breaks negative immediates. The correct
fix is to make these operands 'i8imm' reflecting that they can be either
signed or unsigned but must be 8-bit immediates. This patch backs out
r136287 and then changes those places as well as some others to use
'i8imm' rather than one of the extended variants.
Naturally, this broke something else. The custom DAG nodes had to be
updated to have a much more accurate type constraint of an i8 node, and
a bunch of Pat immediates needed to be specified as i8 values.
The fallout didn't end there though. We also then ceased to be able to
match the instruction-specific intrinsics to the instructions so
modified. Digging, this is because they too used i32 rather than i8 in
their signature. So I've also switched those intrinsics to i8 arguments
in line with the instructions.
In order to make the intrinsic adjustments of course, I also had to add
auto upgrading for the intrinsics.
I suspect that the intrinsic argument types may have led everything down
this rabbit hole. Pretty happy with the result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217310 91177308-0d34-0410-b5e6-96231b3b80d8
computation was totally wrong, but somehow it didn't really show up with
llc.
I've added an assert that triggers on multiple existing test cases and
updated one of them to show the correct value.
There appear to still be more bugs lurking around insertps's mask. =/
However, note that this only really impacts the new vector shuffle
lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217289 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Found a couple of cases where unsigned was still being used. These two should be the last ones in the (entire) Mips backend.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217257 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes hitting the same negative base offset problem
that was already fixed for regular loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217256 91177308-0d34-0410-b5e6-96231b3b80d8
round halfway cases away from zero
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217250 91177308-0d34-0410-b5e6-96231b3b80d8
We must constrain the destination register class of legalized operands
to a VGPR class or else the illegal operand may be folded back into
the instruction by the register coalescer.
This fixes a bug in add.ll that will be uncovered by future commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217249 91177308-0d34-0410-b5e6-96231b3b80d8
shuffle lowering for integer vectors and share it from v4i32, v8i16, and
v16i8 code paths.
Ironically, the SSE2 v16i8 code for this is now better than the SSSE3!
=] Will have to fix the SSSE3 code next to just using a single pshufb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217240 91177308-0d34-0410-b5e6-96231b3b80d8
Patched by Sergey Dmitrouk.
This pass tries to make consecutive compares of values use same operands to
allow CSE pass to remove duplicated instructions. For this it analyzes
branches and adjusts comparisons with immediate values by converting:
GE -> GT
GT -> GE
LT -> LE
LE -> LT
and adjusting immediate values appropriately. It basically corrects two
immediate values towards each other to make them equal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217220 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue where MS inline assembly containing xgetbv wouldn't
be marked as clobbering EAX:EDX. Test for that forthcoming on the Clang
side.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217173 91177308-0d34-0410-b5e6-96231b3b80d8
Follow up to r217138, extending the logic to other NEON-immediate instructions.
As before, the instruction already performs the correct operation and we're
just using a different type for convenience, so we want a true nop-cast.
Patch by Asiri Rathnayake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217159 91177308-0d34-0410-b5e6-96231b3b80d8
We were materialising big-endian constants using DAG nodes with types different
from what was requested, followed by a bitcast. This is fine on little-endian
machines where bitcasting is a nop, but we need a slightly different
representation for big-endian. This adds a new set of NVCAST (natural-vector
cast) operations which are always nops.
Patch by Asiri Rathnayake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217138 91177308-0d34-0410-b5e6-96231b3b80d8
vzext patterns and insert-element patterns that for SSE4 have dedicated
instructions.
With this we can enable the experimental mode in a regression test that
happens to cover some of the past set of issues. You can see that the
new logic does significantly better here on the floating point cases.
A follow-up to this change and the previous ones will hoist the logic
into helpers so it can be shared across element type sizes as in this
particular case it generalizes cleanly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217136 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds support for immediate and shift-left folding into logical
operations.
This fixes rdar://problem/18223183.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217118 91177308-0d34-0410-b5e6-96231b3b80d8
abilities of INSERTPS which are really powerful and come up in very
important contexts such as forming diagonal matrices, etc.
With this I ended up being able to remove the somewhat weird helper
I added for INSERTPS because we can collapse the entire state to a no-op
mask. Added a bunch of tests for inserting into a zero-ish vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217117 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix bug this exposed where when legalizing an immediate
operand, a v_mov_b32 would be created with a VSrc dest register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217108 91177308-0d34-0410-b5e6-96231b3b80d8
'insertps' patterns.
This replaces two shuffles with a single insertps in very common cases.
My next patch will extend this to leverage the zeroing capabilities of
insertps which will allow it to be used in a much wider set of cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217100 91177308-0d34-0410-b5e6-96231b3b80d8
an immediate operand when we don't have instruction-specific comments.
This ensures that instruction-specific comments are attached to the same
line as the instruction which is important for using them to write
readable and maintainable tests. My next commit will just such a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217099 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Split shouldExpandAtomicInIR() into different versions for Stores/Loads/RMWs/CmpXchgs.
Makes runOnFunction cleaner (no more redundant checking/casting), and will help moving
the X86 backend to this pass.
This requires a way of easily detecting which instructions are atomic.
I followed the pattern of mayReadFromMemory, mayWriteOrReadMemory, etc.. in making
isAtomic() a method of Instruction implemented by a switch on the opcodes.
Test Plan: make check
Reviewers: jfb
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D5035
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217080 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes two latent bugs:
- There was no fence inserted before expanded seq_cst load (unsound on Power)
- There was only a fence release before seq_cst stores (again unsound, in particular on Power)
It is not even clear if this is correct on ARM swift processors (where release fences are
DMB ishst instead of DMB ish). This behaviour is currently preserved on ARM Swift
as it is not clear whether it is incorrect. I would love to get documentation stating
whether it is correct or not.
These two bugs were not triggered because Power is not (yet) using this pass, and these
behaviours happen to be (mostly?) working on ARM
(although they completely butchered the semantics of the llvm IR).
See:
http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-August/075821.html
for an example of the problems that can be caused by the second of these bugs.
I couldn't see a way of fixing these in a completely target-independent way without
adding lots of unnecessary fences on ARM, hence the target-dependent parts of this
patch.
This patch implements the new target-dependent parts only for ARM (the default
of not doing anything is enough for AArch64), other architectures will use this
infrastructure in later patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217076 91177308-0d34-0410-b5e6-96231b3b80d8
This is the final round of renaming. This changes tblgen to emit lower-case
function names for FastEmitInst_* and FastEmit_*, and updates all its uses
in the source code.
Reviewed by Eric
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217075 91177308-0d34-0410-b5e6-96231b3b80d8
Things got a little bit messy over the years and it is time for a little bit
spring cleaning.
This first commit is focused on the FastISel base class itself. It doxyfies all
comments, C++11fies the code where it makes sense, renames internal methods to
adhere to the coding standard, and clang-formats the files.
Reviewed by Eric
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217060 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a crash in the OpenCV test:
ImgprocWarpResizeArea/Resize.Mat/16
There is no test case for this, because this failure depends on a
specific ordering of the loads, which could easily change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217040 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r216805 with a fix to a copy-past error, which resulted in an
incorrect register class.
Original commit message:
Select the correct register class for the various instructions that are
generated when combining instructions and constrain the registers to the
appropriate register class.
This fixes rdar://problem/18183707.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217019 91177308-0d34-0410-b5e6-96231b3b80d8
There is already target-dependent instruction selection support for Adds/Subs to
support compares and the intrinsics with overflow check. This takes advantage of
the existing infrastructure to also support Add/Sub, which allows the folding of
immediates, sign-/zero-extends, and shifts.
This fixes rdar://problem/18207316.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217007 91177308-0d34-0410-b5e6-96231b3b80d8
This uses the target-dependent selection code for shifts first, which allows us
to create better code for shifts with immediates and sign-/zero-extend folding.
Vector type are not handled yet and the code falls back to target-independent
instruction selection for these cases.
This fixes rdar://problem/17907920.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216985 91177308-0d34-0410-b5e6-96231b3b80d8
FastISel for AArch64 supports more value types than are actually legal. Use a
dedicated helper function to reflect this.
It is very similar to the isLoadStoreTypeLegal function, with the exception
that vector types are not supported yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216984 91177308-0d34-0410-b5e6-96231b3b80d8
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reinstates commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216982 91177308-0d34-0410-b5e6-96231b3b80d8
The only valid lowering of atomic stores in the X86 backend was mov from
register to memory. As a result, storing an immediate required a useless copy
of the immediate in a register. Now these can be compiled as a simple mov.
Similarily, adding/and-ing/or-ing/xor-ing an
immediate to an atomic location (but through an atomic_store/atomic_load,
not a fetch_whatever intrinsic) can now make use of an 'add $imm, x(%rip)'
instead of using a register. And the same applies to inc/dec.
This second point matches the first issue identified in
http://llvm.org/bugs/show_bug.cgi?id=17281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216980 91177308-0d34-0410-b5e6-96231b3b80d8
This change moves FastISel for AArch64 to target-dependent instruction selection
only. This change replicates the existing target-independent behavior, therefore
there are no changes to the unit tests or new tests.
Future changes will take advantage of this change and update functionality
and unit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216955 91177308-0d34-0410-b5e6-96231b3b80d8
We duplicate ~30 lines of code to lower FABS and FNEG for x86, so this patch combines them into one function.
No functional change intended, so no additional test cases. Test-suite behavior is unchanged.
Differential Revision: http://reviews.llvm.org/D5064
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216942 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix a small copy-paste bug in X86ISelLowering where Chain should
have been used in place of DAG.getEntryToken().
Fixes PR20828.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216929 91177308-0d34-0410-b5e6-96231b3b80d8
This removes static initializers from the backends which generate this data, and also makes this struct match the other Tablegen generated structs in behaviour
Reviewed by Andy Trick and Chandler C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216919 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Left shift of negative integer is an undefined behavior, and
is reported by UBSan. It's ok for imm values to be negative, so we can
just replace left shifts with multiplications.
Test Plan: check-llvm test suite
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: aemerson, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D5132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216910 91177308-0d34-0410-b5e6-96231b3b80d8
r208640 was reverted because it caused a self-hosting failure on ppc64. The
underlying cause was the formation of ISD::ADD nodes with ISD::TargetConstant
operands. Because we have no patterns for 'add' taking 'timm' nodes, these are
selected as r+r add instructions (which is a miscompile). Guard against this
kind of behavior in the future by making the backend crash should this occur
(instead of silently generating invalid output).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216897 91177308-0d34-0410-b5e6-96231b3b80d8
The structures for Windows unwinding are shared across multiple platforms.
Indicate the encoding to be used for the particular target. Use this to switch
the unwind emitter instantiated by the AsmPrinter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216895 91177308-0d34-0410-b5e6-96231b3b80d8
This change will ease refactoring LowerFABS() and LowerFNEG()
since they have a lot of overlap.
Remove the creation of a floating point constant from an integer
because it's going to be used for a bitwise integer op anyway.
No change to codegen expected, but the verbose comment string
for asm output may change from float values to hex (integer),
depending on whether the constant already exists or not.
Differential Revision: http://reviews.llvm.org/D5052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216889 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements a few changes related to the Thumb2 M-class MSR instruction:
* better handling of unpredictable encodings,
* recognition of the _g and _nzcvqg variants by the asm parser only if the DSP
extension is available, preferred output of MSR APSR moves with the _<bits>
suffix for v7-M.
Patch by Petr Pavlu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216874 91177308-0d34-0410-b5e6-96231b3b80d8
Select the correct register class for the various instructions that are
generated when combining instructions and constrain the registers to the
appropriate register class.
This fixes rdar://problem/18183707.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216805 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If a variadic function body contains a musttail call, then we copy all
of the remaining register parameters into virtual registers in the
function prologue. We track the virtual registers through the function
body, and add them as additional registers to pass to the call. Because
this is all done in virtual registers, the register allocator usually
gives us good code. If the function does a call, however, it will have
to spill and reload all argument registers (ew).
Forwarding regparms on x86_32 is not implemented because most compilers
don't support varargs in 32-bit with regparms.
Reviewers: majnemer
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5060
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216780 91177308-0d34-0410-b5e6-96231b3b80d8
We've rejected these kinds of functions since r28405 in 2006 because
it's impossible to lower the return of a callee cleanup varargs
function. However there are lots of legal ways to leave such a function
without returning, such as aborting. Today we can leave a function with
a musttail call to another function with the correct prototype, and
everything works out.
I'm removing the verifier check declaring that a normal return from such
a function is UB.
Reviewed By: nlewycky
Differential Revision: http://reviews.llvm.org/D5059
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216779 91177308-0d34-0410-b5e6-96231b3b80d8
This patch checks for DAG patterns that are an add or a sub followed by a
compare on 16 and 8 bit inputs. Since AArch64 does not support those types
natively they are legalized into 32 bit values, which means that mask operations
are inserted into the DAG to emulate overflow behaviour. In many cases those
masks do not change the result of the processing and just introduce a dependent
operation, often in the middle of a hot loop.
This patch detects the relevent DAG patterns and then tests to see if the
transforms are equivalent with and without the mask, removing the mask if
possible. The exact mechanism of this patch was discusses in
http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-July/074444.html
There is a reasonably good chance there are missed oppurtunities due to similiar
(but not identical) DAG patterns that could be funneled into this test, adding
them should be simple if we see test cases.
Tests included.
rdar://13754426
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216776 91177308-0d34-0410-b5e6-96231b3b80d8
The new solution is to not use this lowering if there are any dynamic
allocas in the current function. We know up front if there are dynamic
allocas, but we don't know if we'll need to create stack temporaries
with large alignment during lowering. Conservatively assume that we will
need such temporaries.
Reviewed By: hans
Differential Revision: http://reviews.llvm.org/D5128
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216775 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Mostly renaming the (not very explicit) variables Tmp0, .. Tmp4, and grouping
related statements together, along with a few lines of comments for the
surprising parts.
No functional change intended.
Test Plan: make check-all
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5088
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216768 91177308-0d34-0410-b5e6-96231b3b80d8
When we select a trunc instruction we don't emit any code if the type is already
i32 or smaller. This is because the instruction that uses the truncated value
will deal with it.
This behavior can incorrectly transfer a kill flag, which was meant for the
result of the truncate, onto the source register.
%2 = trunc i32 %1 to i16
... = ... %2 -> ... = ... vreg1 <kill>
... = ... %1 ... = ... vreg1
This commit fixes this by emitting a COPY instruction, so that the result and
source register are distinct virtual registers.
This fixes rdar://problem/18178188.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216750 91177308-0d34-0410-b5e6-96231b3b80d8
A bug in r216725 meant we tried to discover the type of a SETCC before
confirming the node actually was a SETCC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216734 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Instead of specifying the alignment as metadata which may be destroyed by
transformation passes, make the alignment the second argument to ldu/ldg
intrinsic calls.
Test Plan:
ldu-ldg.ll
ldu-i8.ll
ldu-reg-plus-offset.ll
Reviewers: eliben, meheff, jholewinski
Reviewed By: meheff, jholewinski
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D5093
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216731 91177308-0d34-0410-b5e6-96231b3b80d8
In an llvm-stress generated test, we were trying to create a v0iN type and
asserting when that failed. This case could probably be handled by the
function, but not without added complexity and the situation it arises in is
sufficiently odd that there's probably no benefit anyway.
Should fix PR20775.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216725 91177308-0d34-0410-b5e6-96231b3b80d8
and forget about the previously used accumulator.
Coming up with a simple testcase is not easy, as this highly depends on
what the register allocator is doing: this issue showed up while working
with the PBQP allocator, which produced a different allocation scheme.
A testcase would need to come up with chain starting in D[0-7], then
moving to D[8-15], followed by a call to a function whose regmask
clobbers the starting accumulator in D[0-7], then another use of the chain.
Fixed some formatting, added some invariant checks while there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216721 91177308-0d34-0410-b5e6-96231b3b80d8
Added new types to Legalizer.
Fixed getSetCCResultType function
Added lowering tests.
Reviewed by Elena Demikhovsky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216717 91177308-0d34-0410-b5e6-96231b3b80d8
This fix checks first if the instruction to be folded (e.g. sign-/zero-extend,
or shift) is in the same machine basic block as the instruction we are folding
into.
Not doing so can result in incorrect code, because the value might not be
live-out of the basic block, where the value is defined.
This fixes rdar://problem/18169495.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216700 91177308-0d34-0410-b5e6-96231b3b80d8
The AArch64 target lowering for [zs]ext of vectors is set up to handle
input simple types and expects the generic SDag path to do something reasonable
with anything that's not a simple type. The code, however, was only
checking that the result type was a simple type and assuming that
implied that the source type would also be a simple type. That's not a
valid assumption, as operations like "zext <1 x i1> %0 to <1 x i32>"
demonstrate. The fix is to simply explicitly validate the source type
as well as the result type.
PR20791
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216689 91177308-0d34-0410-b5e6-96231b3b80d8
a single early exit.
And factor the subsequent cast<> from all but one block into a single
variable.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216645 91177308-0d34-0410-b5e6-96231b3b80d8
functionality changed.
Separating this into two functions wasn't helping. There was a decent
amount of boilerplate duplicated, and some subsequent refactorings here
will pull even more common code out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216644 91177308-0d34-0410-b5e6-96231b3b80d8
