Summary:
Before this change, personality directives were not emitted
if there was no invoke left in the function (of course until
recently this also meant that we couldn't know what
the personality actually was). This patch forces personality directives
to still be emitted, unless it is known to be a noop in the absence of
invokes, or the user explicitly specified `nounwind` (and not
`uwtable`) on the function.
Reviewers: majnemer, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D10884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242185 91177308-0d34-0410-b5e6-96231b3b80d8
This can be done only with moves which theoretically
will optimize better later.
Although this transform increases the instruction count,
it should be code size / cycle count neutral in the worst
VALU case. It also seems to slightly improve a couple
of testcases due to other DAG combines this exposes.
This is probably slightly worse for the SALU case, so
it might be better to handle this during moveToVALU,
although then you lose some simplifications like
the load width reducing in the simple testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242177 91177308-0d34-0410-b5e6-96231b3b80d8
If the read2 produced was supposed to be writing into a
super register, it would use the wrong subregister indices.
Fix this by inserting copies, so we only ever write to a vreg_64.
Run the register coalescer again to clean this up, although this
isn't ideal and often does result in an extra move.
Also remove the assert that offset1 > offset0.
There isn't a real reason to not allow this other than a minor
convenience in the compiler, and it doesn't seem worth the effort
of avoiding it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242174 91177308-0d34-0410-b5e6-96231b3b80d8
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242173 91177308-0d34-0410-b5e6-96231b3b80d8
Do not use MachineRegisterInfo::setPhysRegUsed()/isPhysRegUsed()
anymore. This bitset changes function-global state and is set by the
VirtRegRewriter anyway.
Simply use a bitvector private to RAGreedy.
Differential Revision: http://reviews.llvm.org/D10910
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242169 91177308-0d34-0410-b5e6-96231b3b80d8
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242165 91177308-0d34-0410-b5e6-96231b3b80d8
Generate extract instructions (via intrinsics) before the DAG combiner
folds shifts into unrecognizable forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242163 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Signed 16-bit should have priority over unsigned.
- For la, unsigned 16-bit must use ori+addu rather than directly use ori.
- Correct tests on 32-bit immediates with 64-bit predicates by
sign-extending the immediate beforehand. For example, isInt<16>(0xffff8000)
should be true and use addiu.
Also split li/la testing into separate files due to their size.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10967
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242139 91177308-0d34-0410-b5e6-96231b3b80d8
Volatile loads and stores are made visible in global state regardless of
what memory is involved. It is not correct to disregard the ordering
and synchronization scope because it is possible to synchronize with
memory operations performed by hardware.
This partially addresses PR23737.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242126 91177308-0d34-0410-b5e6-96231b3b80d8
- Factor out code to query and modify the sign bit of a floatingpoint
value as an integer. This also works if none of the targets integer
types is big enough to hold all bits of the floatingpoint value.
- Legalize FABS(x) as FCOPYSIGN(x, 0.0) if FCOPYSIGN is available,
otherwise perform bit manipulation on the sign bit. The previous code
used "x >u 0 ? x : -x" which is incorrect for x being -0.0! It also
takes 34 instructions on ARM Cortex-M4. With this patch we only
require 5:
vldr d0, LCPI0_0
vmov r2, r3, d0
lsrs r2, r3, #31
bfi r1, r2, #31, #1
bx lr
(This could be further improved if the compiler would recognize that
r2, r3 is zero).
- Only lower FCOPYSIGN(x, y) = sign(x) ? -FABS(x) : FABS(x) if FABS is
available otherwise perform bit manipulation on the sign bit.
- Perform the sign(x) test by masking out the sign bit and comparing
with 0 rather than shifting the sign bit to the highest position and
testing for "<s 0". For x86 copysignl (on 80bit values) this gets us:
testl $32768, %eax
rather than:
shlq $48, %rax
sets %al
testb %al, %al
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242107 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The capability was lost with D10429 where the personality function was set at function level rather than landing pad level. Now there is no way to get/set the personality function from the C API. That is a problem.
Note that the whole thing could be avoided by improving the C API testing, as started by D10725
Reviewers: chandlerc, bogner, majnemer, andrew.w.kaylor, rafael, rnk, axw
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D10946
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242104 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would refrain from attempting to increase the linkage of
available_externally globals because they were considered weak for the
linker. Now they are treated more like a declaration instead of a weak
definition.
This was causing SSE alignment faults in Chromuim, when some code
assumed it could increase the alignment of a dllimported global that it
didn't control. http://crbug.com/509256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242091 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the sub register indices from the register machine
operands.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242084 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows VSX swap optimization to succeed more frequently.
Specifically, it is concerned with common code sequences that occur
when copying a scalar floating-point value to a vector register. This
patch currently handles cases where the floating-point value is
already in a register, but does not yet handle loads (such as via an
LXSDX scalar floating-point VSX load). That will be dealt with later.
A typical case is when a scalar value comes in as a floating-point
parameter. The value is copied into a virtual VSFRC register, and
then a sequence of SUBREG_TO_REG and/or COPY operations will convert
it to a full vector register of the class required by the context. If
this vector register is then used as part of a lane-permuted
computation, the original scalar value will be in the wrong lane. We
can fix this by adding a swap operation following any widening
SUBREG_TO_REG operation. Additional COPY operations may be needed
around the swap operation in order to keep register assignment happy,
but these are pro forma operations that will be removed by coalescing.
If a scalar value is otherwise directly referenced in a computation
(such as by one of the many XS* vector-scalar operations), we
currently disable swap optimization. These operations are
lane-sensitive by definition. A MentionsPartialVR flag is added for
use in each swap table entry that mentions a scalar floating-point
register without having special handling defined.
A common idiom for PPC64LE is to convert a double-precision scalar to
a vector by performing a splat operation. This ensures that the value
can be referenced as V[0], as it would be for big endian, whereas just
converting the scalar to a vector with a SUBREG_TO_REG operation
leaves this value only in V[1]. A doubleword splat operation is one
form of an XXPERMDI instruction, which takes one doubleword from a
first operand and another doubleword from a second operand, with a
two-bit selector operand indicating which doublewords are chosen. In
the general case, an XXPERMDI can be permitted in a lane-swapped
region provided that it is properly transformed to select the
corresponding swapped values. This transformation is to reverse the
order of the two input operands, and to reverse and complement the
bits of the selector operand (derivation left as an exercise to the
reader ;).
A new test case that exercises the scalar-to-vector and generalized
XXPERMDI transformations is added as CodeGen/PowerPC/swaps-le-5.ll.
The patch also requires a change to CodeGen/PowerPC/swaps-le-3.ll to
use CHECK-DAG instead of CHECK for two independent instructions that
now appear in reverse order.
There are two small unrelated changes that are added with this patch.
First, the XXSLDWI instruction was incorrectly omitted from the list
of lane-sensitive instructions; this is now fixed. Second, I observed
that the same webs were being rejected over and over again for
different reasons. Since it's sufficient to reject a web only once, I
added a check for this to speed up the compilation time slightly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242081 91177308-0d34-0410-b5e6-96231b3b80d8
When spotting that a loop can use ctpop, we were incorrectly replacing all uses of a value with a value derived from ctpop.
The bug here was exposed because we were replacing a use prior to the ctpop with the ctpop value and so we have a use before def, i.e., we changed
%tobool.5 = icmp ne i32 %num, 0
store i1 %tobool.5, i1* %ptr
br i1 %tobool.5, label %for.body.lr.ph, label %for.end
to
store i1 %1, i1* %ptr
%0 = call i32 @llvm.ctpop.i32(i32 %num)
%1 = icmp ne i32 %0, 0
br i1 %1, label %for.body.lr.ph, label %for.end
Even if we inserted the ctpop so that it dominates the store here, that would still be incorrect. The store doesn’t want the result of ctpop.
The fix is very simple, and involves replacing only the branch condition with the ctpop instead of all uses.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242068 91177308-0d34-0410-b5e6-96231b3b80d8
The outlined funclets call intrinsics which reference labels from the
LSDA. This situation can easily arise in small functions with a single
cleanup at -O0, where Clang marks a definition as nounwind, and then
WinEHPrepare "discovers" that the landingpad is dead by accident and
deletes it.
We now need to ask the LLVM IR Function for it's personality directly,
rather than going through MachineModuleInfo.
Fixes PR23892.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242063 91177308-0d34-0410-b5e6-96231b3b80d8
Enable partial and runtime loop unrolling for NVPTX backend via
TTI::UnrollingPreferences with a small threshold. This partially unrolls
small loops which are often unrolled by the PTX to SASS compiler
and unrolling earlier can be beneficial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242049 91177308-0d34-0410-b5e6-96231b3b80d8
Enable runtime unrolling for loops with unroll count metadata ("#pragma unroll N")
and a runtime trip count. Also, do not unroll loops with unroll full metadata if the
loop has a runtime loop count. Previously, such loops would be unrolled with a
very large threshold (pragma-unroll-threshold) if runtime unrolled happened to be
enabled resulting in a very large (and likely unwise) unroll factor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242047 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the fixed stack objects, including fixed spill slots.
The fixed stack objects are serialized using a YAML sequence of YAML inline
mappings. Each mapping has the object's ID, type, size, offset, and alignment.
The objects that aren't spill slots also serialize the isImmutable and isAliased
flags.
The fixed stack objects are a part of the machine function's YAML mapping.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242045 91177308-0d34-0410-b5e6-96231b3b80d8
This is a C++11 feature that both GCC and MSVC have supported as ane extension
long before C++11 was approved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242042 91177308-0d34-0410-b5e6-96231b3b80d8
Passes should never modify it, just use the const version. While there
reduce copying in LoopInterchange. No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242041 91177308-0d34-0410-b5e6-96231b3b80d8
It had accidently accepted a symbol+offset value (and emitted
incorrect code for it, keeping only the offset part) instead of
properly reporting the constraint as invalid.
Differential Revision: http://reviews.llvm.org/D11039
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242040 91177308-0d34-0410-b5e6-96231b3b80d8
The 64/128-bit vector types are legal if NEON instructions are
available. However, there was no matching patterns for @llvm.cttz.*()
intrinsics and result in fatal error.
This commit fixes the problem by lowering cttz to:
a. ctpop((x & -x) - 1)
b. width - ctlz(x & -x) - 1
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242037 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The iteration order within a member of DepCands is deterministic
and therefore we don't have to sort the accesses within a member.
We also don't have to copy the indices of the pointers into a
vector, since we can iterate over the members of the class.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11145
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242033 91177308-0d34-0410-b5e6-96231b3b80d8
In this patch I have only encoding. Intrinsics and DAG lowering will be in the next patch.
I temporary removed the old intrinsics test (just to split this patch).
Half types are not covered here.
Differential Revision: http://reviews.llvm.org/D11134
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242023 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This at least saves compile time. I also encountered a case where
ephemeral values affect whether other variables are promoted, causing
performance issues. It may be a bug in LSR, but I didn't manage to
reduce it yet. Anyhow, I believe it's in general not worth considering
ephemeral values in LSR.
Reviewers: atrick, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11115
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242011 91177308-0d34-0410-b5e6-96231b3b80d8
Register r12 ('ip') is used by GCC for this purpose
and hence is used here. As discussed on the GCC mailing
list, the register choice is an ABI issue and so
choosing the same register as GCC means
__builtin_call_with_static_chain is compatible.
A similar patch has just gone in the AArch64 backend,
so this is just the ARM counterpart, following the same
discussion.
Patch by Stephen Cross.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241996 91177308-0d34-0410-b5e6-96231b3b80d8
While the v4i32 shl operation is already vectorized using a cvttps2dq/pmulld pattern, the lshr/ashr opeations are still scalarized.
This patch adds vectorization support for non-uniform v4i32 shift operations - it splats constant shift amounts to allow them to use the immediate sse shift instructions, or extracts/zero-extends non-constant shift amounts. The individual results are then blended together.
Differential Revision: http://reviews.llvm.org/D11063
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241989 91177308-0d34-0410-b5e6-96231b3b80d8
There is no suitable basic block to sink instructions in loops without
exits. The only way an instruction in a loop without exits can be used
is as an incoming value to a PHI. In such cases, the incoming block for
the corresponding value is unreachable.
This fixes PR24013.
Differential Revision: http://reviews.llvm.org/D10903
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241987 91177308-0d34-0410-b5e6-96231b3b80d8
r238842 added the TargetRecip system for controlling use of reciprocal
estimates for sqrt and division using a set of parameters that can be set by
the frontend. Clang now supports a sophisticated -mrecip option, and this will
allow that option to effectively control the relevant code-generation
functionality of the PPC backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241985 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the 'nest' attribute, which allows the static chain
register to be set for functions calls under non-Darwin PPC/PPC64 targets. r11
is the chain register (which the PPC64 ELF ABI calls the "environment
pointer"). For indirect calls under PPC64 ELFv1, this would normally be loaded
from the function descriptor, but providing an explicit 'nest' parameter will
override that process and use the value provided.
This allows __builtin_call_with_static_chain to work as expected on PowerPC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241984 91177308-0d34-0410-b5e6-96231b3b80d8
r236894 caused PR23626 (Clang miscompiles webkit's base64 decoder), and was
reverted in r237984. This reapplies the patch with an additional test case for
PR23626 and the associated fix (both scales and offsets in the
BasicAliasAnalysis::constantOffsetHeuristic should initially be zero).
Patch by Nick White, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241981 91177308-0d34-0410-b5e6-96231b3b80d8
The following functions are moved from the LoopVectorizer to VectorUtils:
- getGEPInductionOperand
- stripGetElementPtr
- getUniqueCastUse
- getStrideFromPointer
These used to be static functions in LoopVectorize, but will also be used by
the upcoming loop versioning LICM transformation.
Patch by Ashutosh Nema!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241980 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds new attribute called "argmemonly". Function marked with this attribute can only access memory through it's argument pointers. This attribute directly corresponds to the "OnlyAccessesArgumentPointees" ModRef behaviour in alias analysis.
Differential Revision: http://reviews.llvm.org/D10398
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241979 91177308-0d34-0410-b5e6-96231b3b80d8
No in-tree alias analysis used this facility, and it was not called in
any particularly rigorous way, so it seems unlikely to be correct.
Note that one of the only stateful AA implementations in-tree,
GlobalsModRef is completely broken currently (and any AA passes like it
are equally broken) because Module AA passes are not effectively
invalidated when a function pass that fails to update the AA stack runs.
Ultimately, it doesn't seem like we know how we want to build stateful
AA, and until then trying to support and maintain correctness for an
untested API is essentially impossible. To that end, I'm planning to rip
out all of the update API. It can return if and when we need it and know
how to build it on top of the new pass manager and as part of *tested*
stateful AA implementations in the tree.
Differential Revision: http://reviews.llvm.org/D10889
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241975 91177308-0d34-0410-b5e6-96231b3b80d8
Disallow all mutation of `MCSubtargetInfo` expect the feature bits.
Besides deleting the assignment operators -- which were dead "code" --
this restricts `InitMCProcessorInfo()` to subclass initialization
sequences, and exposes a new more limited function called
`setDefaultFeatures()` for use by the ARMAsmParser `.cpu` directive.
There's a small functional change here: ARMAsmParser used to adjust
`MCSubtargetInfo::CPUSchedModel` as a side effect of calling
`InitMCProcessorInfo()`, but I've removed that suspicious behaviour.
Since the AsmParser shouldn't be doing any scheduling, there shouldn't
be any observable change...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241961 91177308-0d34-0410-b5e6-96231b3b80d8
Most loads and stores are derived from pointers derived from
a kernel argument load inserted during argument lowering.
This was just using the EntryToken chain for the argument loads,
and any users of these loads were also on the EntryToken chain.
Return the chain of the lowered argument load so that dependent loads
end up on the correct chain.
No test since I'm not aware of any case where this actually
broke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241960 91177308-0d34-0410-b5e6-96231b3b80d8
Integral class statics are handled oddly in MSVC, we don't need them
in this case, use an enum instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241958 91177308-0d34-0410-b5e6-96231b3b80d8
Force all creators of `MCSubtargetInfo` to immediately initialize it,
merging the default constructor and the initializer into an initializing
constructor. Besides cleaning up the code a little, this makes it clear
that the initializer is never called again later.
Out-of-tree backends need a trivial change: instead of calling:
auto *X = new MCSubtargetInfo();
InitXYZMCSubtargetInfo(X, ...);
return X;
they should call:
return createXYZMCSubtargetInfoImpl(...);
There's no real functionality change here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241957 91177308-0d34-0410-b5e6-96231b3b80d8
Remove all calls to `MCSubtargetInfo::InitCPUSched()` and merge its body
into the only relevant caller, `MCSubtargetInfo::InitMCProcessorInfo()`.
We were only calling the former after explicitly calling the latter with
the same CPU; it's confusing to have both methods exposed.
Besides a minor (surely unmeasurable) speedup in ARM and X86 from
avoiding running the logic twice, no functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241956 91177308-0d34-0410-b5e6-96231b3b80d8
This in turn would sometimes introduce new cleanupblocks that didn't
previously exist. The uses were being introduced by SSA value demotion.
We actually want to *promote* uses of EH pointers and selectors, so I
added some spcecial casing to avoid demoting such instructions. This is
getting overly complicated, but hopefully we'll come along and delete it
in the new representation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241950 91177308-0d34-0410-b5e6-96231b3b80d8
The motivation is to allow GatherAllAliases / FindBetterChain
to not give up on dependent loads of a pointer from constant memory.
This is important for AMDGPU, because most loads are pointers
derived from a load of a kernel argument from constant memory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241948 91177308-0d34-0410-b5e6-96231b3b80d8
`MCSchedModel` is large. Make `MCSchedModel::GetDefaultSchedModel()`
return by-reference instead of by-value, so we can store a pointer in
`MCSubtargetInfo::CPUSchedModel` instead of a copy.
Note: since `MCSchedModel` is POD, this doesn't create a static
constructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241947 91177308-0d34-0410-b5e6-96231b3b80d8
Integral class statics are handled oddly in MSVC, we don't need them in
this case, use an enum instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241945 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR23804: assertion failure in emitPrologue in the case of a
function with an empty frame and a dynamic alloca that needs stack
realignment. This is a typical case for AddressSanitizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241943 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Following the discussion on r241884, it's more reasonable to assume that a
target has no vector registers by default instead of letting every such
target overrides getNumberOfRegisters.
Therefore, this patch modifies BasicTTIImpl::getNumberOfRegisters to
return 0 when Vector is true, and partially reverts r241884 which
modifies NVPTXTTIImpl::getNumberOfRegisters.
It also fixes a performance bug in LoopVectorizer. Even if a target has
no vector registers, vectorization may still help ILP. So, we need both
checks to be false before disabling loop vectorization all together.
Reviewers: hfinkel
Subscribers: llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241942 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The class will obviously need improvement down the road. For one, there
is no reason that addPHINodes would have to be exposed like that. I
will make this and other improvements in follow-up patches.
The main goal is to be able to share this functionality. The
LoopLoadElimination pass I am working on needs it too. Later we can
move other clients as well (LV and Ashutosh's LICMVer).
Reviewers: hfinkel, ashutosh.nema
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10577
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241932 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This makes them available to the LoopVersioning class as that is moved
to its own module in the next patch.
Reviewers: ashutosh.nema, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241931 91177308-0d34-0410-b5e6-96231b3b80d8
This commit factors out common code from MergeBaseUpdateLoadStore() and
MergeBaseUpdateLSMultiple() and introduces a new function
MergeBaseUpdateLSDouble() which merges adds/subs preceding/following a
strd/ldrd instruction into an strd/ldrd instruction with writeback where
possible.
Differential Revision: http://reviews.llvm.org/D10676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241928 91177308-0d34-0410-b5e6-96231b3b80d8
If our two inputs have known top-zero bit counts M and N, we trivially
know that the output cannot have any bits set in the top (min(M, N)-1)
bits, since nothing could carry past that point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241927 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the initial serialization of stack objects from the
MachineFrameInfo class. It can only serialize the ordinary stack objects
(including ordinary spill slots), but it doesn't serialize variable sized or
fixed stack objects yet.
The stack objects are serialized using a YAML sequence of YAML inline mappings.
Each mapping has the object's ID, type, size, offset and alignment. The stack
objects are a part of machine function's YAML mapping.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241922 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The target frame lowering's concrete type is always known in RegisterInfo, yet it's only sometimes devirtualized through a static_cast. This change adds an auto-generated static function <Target>GenRegisterInfo::getFrameLowering(const MachineFunction &MF) which does this devirtualization, and uses this function in all targets which can.
This change was suggested by sunfish in D11070 for WebAssembly, I figure that I may as well improve the other targets while I'm here.
Subscribers: sunfish, ted, llvm-commits, jfb
Differential Revision: http://reviews.llvm.org/D11093
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241921 91177308-0d34-0410-b5e6-96231b3b80d8
This improves the logic in several ways and is a preparation for
followup patches:
- First perform an analysis and create a list of merge candidates, then
transform. This simplifies the code in that you have don't have to
care to much anymore that you may be holding iterators to
MachineInstrs that get removed.
- Analyze/Transform basic blocks in reverse order. This allows to use
LivePhysRegs to find free registers instead of the RegisterScavenger.
The RegisterScavenger will become less precise in the future as it
relies on the deprecated kill-flags.
- Return the newly created node in MergeOps so there's no need to look
around in the schedule to find it.
- Rename some MBBI iterators to InsertBefore to make their role clear.
- General code cleanup.
Differential Revision: http://reviews.llvm.org/D10140
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241920 91177308-0d34-0410-b5e6-96231b3b80d8
FCmp behaves a lot like a floating-point binary operator in many ways,
and can benefit from fast-math information. Flags such as nsz and nnan
can affect if this fcmp (in combination with a select) can be treated
as a fminnum/fmaxnum operation.
This adds backwards-compatible bitcode support, IR parsing and writing,
LangRef changes and IRBuilder changes. I'll need to audit InstSimplify
and InstCombine in a followup to find places where flags should be
copied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241901 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Reviewers: rnk, JosephTremoulet, reames, nlewycky, rjmccall
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11041
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241888 91177308-0d34-0410-b5e6-96231b3b80d8
Not doing this can lead to misoptimizations down the line, e.g. because
of range metadata on the replacing load excluding values that are valid
for the load that is being replaced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241886 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Without this patch, LoopVectorizer in certain cases (see loop-vectorize.ll)
produces code with complex control flow which hurts later optimizations. Since
NVPTX doesn't have vector registers in LLVM's sense
(NVPTXTTI::getRegisterBitWidth(true) == 32), we for now declare no vector
registers to effectively disable loop vectorization.
Reviewers: jholewinski
Subscribers: jingyue, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241884 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently this is important, otherwise _except_handler3 assumes that
the registration node is corrupted and ignores it.
Also fix a bug in WinEHPrepare where we would insert code after a
terminator instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241877 91177308-0d34-0410-b5e6-96231b3b80d8
The virtual registers are serialized using a YAML sequence of YAML inline
mappings. Each mapping has the id of the virtual register and the register
class.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10981
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241868 91177308-0d34-0410-b5e6-96231b3b80d8
Currently canCheckPtrAtRT returns two flags NeedRTCheck and CanDoRT.
NeedRTCheck says whether we need checks and CanDoRT whether we can
generate the checks. The idea is to encode three states with these:
Need/Can:
(1) false/dont-care: no checks are needed
(2) true/false: we need checks but can't generate them
(3) true/true: we need checks and we can generate them
This is pretty unnecessary since the caller (analyzeLoop) is only
interested in whether we can generate the checks if we actually need
them (i.e. 1 or 3).
So this change cleans up to return just that (CanDoRTIfNeeded) and pulls
all the underlying logic into canCheckPtrAtRT.
By doing all this, we simplify analyzeLoop which is the complex function
in LAA.
There is further room for improvement here by using RtCheck.Need
directly rather than a new local variable NeedRTCheck but that's for a
later patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241866 91177308-0d34-0410-b5e6-96231b3b80d8
The runtime does not restore CSRs when transferring control back to the
function handling the exception. According to the experts on IRC, LLVM's
register allocator has no way to model register clobbers that only
happen on one edge of the CFG. For now, don't worry about trying to use
the meager three CSRs available on 32-bit X86 and just say that such
invokes preserve nothing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241865 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a new error which is reported when the MIR Parser encounters
a machine function without any machine basic blocks. The machine verifier
expects that the machine functions have at least one MBB, and this error will
prevent machine functions without MBBs from reaching the machine verifier and
crashing with an assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241862 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change ImplicitNullChecks would only pick loads of the form:
```
test Reg, Reg
jz elsewhere
fallthrough:
movl 32(Reg), Reg2
```
but not (say)
```
test Reg, Reg
jz elsewhere
fallthrough:
inc Reg3
movl 32(Reg), Reg2
```
This change teaches ImplicitNullChecks to look through "unrelated"
instructions like `inc Reg3` when searching for a load instruction
to convert to a trapping load.
Reviewers: atrick, JosephTremoulet, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241850 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the 13 scalar boolean and integer attributes from the
MachineFrameInfo class: IsFrameAddressTaken, IsReturnAddressTaken, HasStackMap,
HasPatchPoint, StackSize, OffsetAdjustment, MaxAlignment, AdjustsStack,
HasCalls, MaxCallFrameSize, HasOpaqueSPAdjustment, HasVAStart, and
HasMustTailInVarArgFunc. These attributes are serialized as part
of the frameInfo YAML mapping, which itself is a part of the machine function's
YAML mapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241844 91177308-0d34-0410-b5e6-96231b3b80d8
It looks like ld64 requires it. With this we seem to be able to bootstrap using
llvm-ar+/usr/bin/true instead of ar+ranlib (currently on stage2).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241842 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In RewriteLoopExitValues, before expanding out an SCEV expression using
SCEVExpander, try to see if an existing LLVM IR expression already
computes the value we're interested in. If so use that existing
expression.
Apart from reducing IndVars' reliance on the rest of the compilation
pipeline, this also prevents IndVars from concluding some expressions as
"high cost" when they're not. For instance,
`InductiveRangeCheckElimination` often emits code of the following form:
```
len = umin(len_A, len_B)
loop:
...
if (i++ < len)
goto loop
outside_loop:
use(i)
```
`SCEVExpander` refuses to rewrite the use of `i` in `outside_loop`,
since it thinks the value of `i` on loop exit, `len`, is a high cost
expansion since it contains an `umax` in it. With this change,
`IndVars` can see that it can re-use `len` instead of creating a new
expression to compute `umin(len_A, len_B)`.
I considered putting this cleverness in `SCEVExpander`, but I was
worried that it may then have a deterimental effect on other passes
that use it. So I decided it was better to just do this in the one
place where it seems like an obviously good idea, with the intent of
generalizing later if needed.
Reviewers: atrick, reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10782
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241838 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows the read_register and write_register intrinsics to
read/write the RBP/EBP registers on X86 iff the targeted register is
the frame pointer for the containing function.
Differential Revision: http://reviews.llvm.org/D10977
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241827 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes bugs that were exposed by the addition of fast-math-flags in the DAG:
r237046 ( http://reviews.llvm.org/rL237046 ):
1. When replacing a division node, it's not enough to RAUW.
We should call CombineTo() to delete dead nodes and combine again.
2. Because we are changing the DAG, we can't return an empty SDValue
after the transform. As the code comments say:
Visitation implementation - Implement dag node combining for different node types.
The semantics are as follows: Return Value:
SDValue.getNode() == 0 - No change was made
SDValue.getNode() == N - N was replaced, is dead and has been handled.
otherwise - N should be replaced by the returned Operand.
The new test case shows no difference with or without this patch, but it will crash if
we re-apply r237046 or enable FMF via the current -enable-fmf-dag cl::opt.
Differential Revision: http://reviews.llvm.org/D9893
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241826 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The checking pointer group construction algorithm relied on the iteration on DepCands.
We would need the same leaders across runs and the same iteration order over the underlying std::set for determinism.
This changes the algorithm to process the pointers in the order in which they were added to the runtime check, which is deterministic.
We need to update the tests, since the order in which pointers appear has changed.
No new tests were added, since it is impossible to test for non-determinism.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11064
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241809 91177308-0d34-0410-b5e6-96231b3b80d8
The gnu ar format uses BE numbers. The BSD one uses LE. Add a helper for one or the
other. NFC for now, just removes some noise from the following patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241808 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: If shift amount is a constant value > 64 bit it is handled incorrectly during type legalization and X86 lowering. This patch the type of shift amount argument in function DAGTypeLegalizer::ExpandShiftByConstant from unsigned to APInt.
Reviewers: nadav, majnemer, sanjoy, RKSimon
Subscribers: RKSimon, llvm-commits
Differential Revision: http://reviews.llvm.org/D10767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241806 91177308-0d34-0410-b5e6-96231b3b80d8
It will get another use in the following patch. Also rename the other helper to
printGNUSmallMemberHeader for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241805 91177308-0d34-0410-b5e6-96231b3b80d8
The nest attribute is currently supported on the x86 (32-bit) and x86-64
backends, but not on ARM (32-bit) or AArch64. This patch adds support for
nest to the AArch64 backend.
Register x18 is used by GCC for this purpose and hence is used here.
As discussed on the GCC mailing list the register choice is an ABI issue
and so choosing the same register as GCC means __builtin_call_with_static_chain
is compatible.
Patch by Stephen Cross.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241794 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: If shift amount is a constant value > 64 bit it is handled incorrectly during type legalization and X86 lowering. This patch the type of shift amount argument in function DAGTypeLegalizer::ExpandShiftByConstant from unsigned to APInt.
Reviewers: nadav, majnemer, sanjoy, RKSimon
Subscribers: RKSimon, llvm-commits
Differential Revision: http://reviews.llvm.org/D10767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241790 91177308-0d34-0410-b5e6-96231b3b80d8
The justification of this change is here: http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-March/082989.html
According to the current GEP syntax, vector GEP requires that each index must be a vector with the same number of elements.
%A = getelementptr i8, <4 x i8*> %ptrs, <4 x i64> %offsets
In this implementation I let each index be or vector or scalar. All vector indices must have the same number of elements. The scalar value will mean the splat vector value.
(1) %A = getelementptr i8, i8* %ptr, <4 x i64> %offsets
or
(2) %A = getelementptr i8, <4 x i8*> %ptrs, i64 %offset
In all cases the %A type is <4 x i8*>
In the case (2) we add the same offset to all pointers.
The case (1) covers C[B[i]] case, when we have the same base C and different offsets B[i].
The documentation is updated.
http://reviews.llvm.org/D10496
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241788 91177308-0d34-0410-b5e6-96231b3b80d8
The original name was too close to NeedRTCheck which is what the actual
memcheck analysis returns. This flag, as the new name suggests, is only
used to whether to initiate that analysis.
Also a comment is added to answer one question I had about this code for
a long time. Namely, how does this flag differ from
isDependencyCheckNeeded since they are seemingly set at the same time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241784 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Remove empty subclass in the process.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren, ted
Differential Revision: http://reviews.llvm.org/D11045
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241780 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11042
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241779 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11040
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241778 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11038
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241777 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11037
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241776 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241775 91177308-0d34-0410-b5e6-96231b3b80d8
DataLayout is no longer optional. It was initialized with or without
a DataLayout, and the DataLayout when supplied could have been the
one from the TargetMachine.
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11021
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241774 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Avoid using the TargetMachine owned DataLayout and use the Module owned
one instead. This requires passing the DataLayout up the stack to
ComputeValueVTs().
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11019
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241773 91177308-0d34-0410-b5e6-96231b3b80d8
Column information is present in CodeView when the line table subsection
has bit 0 set to 1 in it's flags field. The column information is
represented as a pair of 16-bit quantities: a starting and ending
column. This information is present at the end of the chunk, after all
the line-PC pairs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241764 91177308-0d34-0410-b5e6-96231b3b80d8
Fix some places where the word consecutive is used but the code really
means constant-stride (i.e. not just unit stride).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241763 91177308-0d34-0410-b5e6-96231b3b80d8
This commit ([LAA] Fix estimation of number of memchecks) regressed the
logic a bit. We shouldn't quit the analysis if we encounter a pointer
without known bounds *unless* we actually need to emit a memcheck for
it.
The original code was using NumComparisons which is now computed
differently. Instead I compute NeedRTCheck from NumReadPtrChecks and
NumWritePtrChecks.
As side note, I find the separation of NeedRTCheck and CanDoRT
confusing, so I will try to merge them in a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241756 91177308-0d34-0410-b5e6-96231b3b80d8
Place all code corresponding to a run-time check in one place.
Previously we generated some code, then proceeded to a next check, then
finished the code for the first check (like splitting blocks and
generating branches). Now the code for generating a check is
self-contained.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241741 91177308-0d34-0410-b5e6-96231b3b80d8
A recent patch added calls to isInstructionTriviallyDead without the
corresponding dependency on TransformUtils.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241731 91177308-0d34-0410-b5e6-96231b3b80d8
All the usual X86 target-specific conventions are collapsed to the
normal Win64 convention, but the custom conventions like GHC and webkit
should not be.
Previously we would assume that the caller allocated 32 bytes of shadow
space for us, which is not how webkit_jscc or other custom conventions
are supposed to work.
Based on a patch by peavo@outlook.com.
Fixes PR24051.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241725 91177308-0d34-0410-b5e6-96231b3b80d8
No support for the symbol table yet (but will hopefully add it today).
We always use the long filename format so that we can align the member,
which is an advantage of the BSD format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241721 91177308-0d34-0410-b5e6-96231b3b80d8
This commit changes the type of the field 'Name' in the struct
'yaml::MachineBasicBlock' from 'std::string' to 'yaml::StringValue'. This change
allows the MIR parser to report errors related to the MBB name with the proper
source locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241718 91177308-0d34-0410-b5e6-96231b3b80d8
The inferred output file name is based on the first input file, not the
first one with extension .obj. The output file was also being written to
the wrong directory; it needs to be written to whichever directory on the
libpath it was found in. This change fixes both issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241710 91177308-0d34-0410-b5e6-96231b3b80d8
r239285 ([LoopAccessAnalysis] Teach LAA to check the memory dependence
between strided accesses.) introduced a new case under
MemoryDepChecker::isDependent. We normally have debug output for each
case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241707 91177308-0d34-0410-b5e6-96231b3b80d8
The 32-bit lowering assumed that WinEHPrepare had this invariant.
WinEHPrepare did it for C++, but not SEH. The result was that we would
insert calls to llvm.x86.seh.restoreframe in normal basic blocks, which
corrupted the frame pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241699 91177308-0d34-0410-b5e6-96231b3b80d8
There's no reason to be able to mutate `MCSubtargetInfo` in
`getDeprecationInfo()`. Constify the reference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241693 91177308-0d34-0410-b5e6-96231b3b80d8
- Implement copying ASR to/from GPR regs.
- Mark ASRs as non-allocatable, so it won't try to arbitrarily use
them inappropriately.
- Instead of inserting explicit WRASR/RDASR nodes in the MUL/DIV
routines, just do normal register copies.
- Also...mark div as using Y, not just writing it.
Added a test case with some code which previously died with an
assertion failure (with -O0), or produced wrong code (otherwise).
(Third time's the charm?)
Differential Revision: http://reviews.llvm.org/D10401
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241686 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Often filter-like loops will do memory accesses that are
separated by constant offsets. In these cases it is
common that we will exceed the threshold for the
allowable number of checks.
However, it should be possible to merge such checks,
sice a check of any interval againt two other intervals separated
by a constant offset (a,b), (a+c, b+c) will be equivalent with
a check againt (a, b+c), as long as (a,b) and (a+c, b+c) overlap.
Assuming the loop will be executed for a sufficient number of
iterations, this will be true. If not true, checking against
(a, b+c) is still safe (although not equivalent).
As long as there are no dependencies between two accesses,
we can merge their checks into a single one. We use this
technique to construct groups of accesses, and then check
the intervals associated with the groups instead of
checking the accesses directly.
Reviewers: anemet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10386
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241673 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11017
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241655 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11009
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241654 91177308-0d34-0410-b5e6-96231b3b80d8
The incoming EBP value points to the end of a local stack allocation, so
we can use that to restore ESI, the base pointer. Once we do that, we
can use local stack allocations. If we know we need stack realignment,
spill the original frame pointer in the prologue and reload it after
restoring ESI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241648 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11010
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241646 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adopts the 'ModuleSlotTracker' class, which was surfaced in r240842,
to print the global address operands. This change ensures that the slot tracker
won't have to be recreated every time a global address operand is printed,
making the MIR printing more efficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241645 91177308-0d34-0410-b5e6-96231b3b80d8
Clang uses this for SEH finally. The new intrinsic will produce the
right value when stack realignment is required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241643 91177308-0d34-0410-b5e6-96231b3b80d8
Tim Northover has told me that they can occur when the compiler cleverly
constructs constants - as demonstrated in the test case.
rdar://21703486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241641 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Initially, these intrinsics seemed like part of a family of "frame"
related intrinsics, but now I think that's more confusing than helpful.
Initially, the LangRef specified that this would create a new kind of
allocation that would be allocated at a fixed offset from the frame
pointer (EBP/RBP). We ended up dropping that design, and leaving the
stack frame layout alone.
These intrinsics are really about sharing local stack allocations, not
frame pointers. I intend to go further and add an `llvm.localaddress()`
intrinsic that returns whatever register (EBP, ESI, ESP, RBX) is being
used to address locals, which should not be confused with the frame
pointer.
Naming suggestions at this point are welcome, I'm happy to re-run sed.
Reviewers: majnemer, nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11011
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241633 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
SelectionDAG itself is not invoking directly the DataLayout in the
TargetMachine, but the "TargetLowering" class is still using it. I'll
address it in a following commit.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11000
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241618 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r241602. We had a latent bug in SCCP where we would
make a basic block empty and then proceed to ask questions about it's
terminator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241616 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10987
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241615 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10986
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241614 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10985
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241613 91177308-0d34-0410-b5e6-96231b3b80d8
Since the NvCast is generated by the selection process the concerns about
endianess and bit reversal don't apply.
rdar://21703486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241611 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10984
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241610 91177308-0d34-0410-b5e6-96231b3b80d8
This commit modifies the interface for the machine instruction parsing
functions by wrapping the parameter 'MBBSlots' in a new structure called
'PerFunctionMIParsingState'. This change is useful as in the future I will be
able to pass new parameters to the machine instruction parser just by modifying
the 'PerFunctionMIParsingState' structure instead of adding a new parameter to
each function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241607 91177308-0d34-0410-b5e6-96231b3b80d8
getSymbolValue now returns a value that in convenient for most callers:
* 0 for undefined
* symbol size for common symbols
* offset/address for symbols the rest
Code that needs something more specific can check getSymbolFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241605 91177308-0d34-0410-b5e6-96231b3b80d8
This type of prologue isn't supported yet. Implementing it should be a
matter of copying the adjusted incoming EBP into ESI (the base pointer)
instead of EBP. The original EBP can be saved and restored from other
memory afterwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241597 91177308-0d34-0410-b5e6-96231b3b80d8
This includes code that is intended to be target-independent as well
as the Hexagon-specific details. This is just the framework without
any users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241595 91177308-0d34-0410-b5e6-96231b3b80d8
At least not in the interface exposed by ObjectFile. This matches what ELF and
COFF implement.
Adjust existing code that was expecting them to have values. No overall
functionality change intended.
Another option would be to change the interface and the ELF and COFF
implementations to say that the value of a common symbol is its size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241593 91177308-0d34-0410-b5e6-96231b3b80d8
They are implemented like that in some object formats, but for the interface
provided by lib/Object, SF_Undefined and SF_Common are different things.
This matches the ELF and COFF implementation and fixes llvm-nm for MachO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241587 91177308-0d34-0410-b5e6-96231b3b80d8
In these two contexts we really just want the raw n_value. No need to use
getSymbolValue which checks for special cases where, semantically, the symbol
has no value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241584 91177308-0d34-0410-b5e6-96231b3b80d8
getFirstNonPHI's documentation states that it returns null if there is
no non-PHI instruction. However, it instead returns a pointer to the
end iterator. The implementation of getFirstNonPHI claims that
dereferencing the iterator will result in an assertion failure but this
doesn't occur. Instead, machinery like getFirstInsertionPt will attempt
to isa<> this invalid memory which results in unpredictable behavior.
Instead, make getFirst* return null if no such instruction exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241570 91177308-0d34-0410-b5e6-96231b3b80d8
be emitted.
This is needed to enable ARM long calls for LTO and enable and disable it on a
per-function basis.
Out-of-tree projects currently using EnableARMLongCalls to emit long calls
should start passing "+long-calls" to the feature string (see the changes made
to clang in r241565).
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D9364
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241566 91177308-0d34-0410-b5e6-96231b3b80d8
This commit verifies that the parsed machine instructions contain the implicit
register operands as specified by the MCInstrDesc. Variadic and call
instructions aren't verified.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10781
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241537 91177308-0d34-0410-b5e6-96231b3b80d8
Calling into the base class' getAnalysisUsage method after we did our pass
specific modifications. This shouldn't really matter since this is the last
pass in the pipeline anyways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241536 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the implicit flag for the register machine operands. It
introduces two new keywords into the machine instruction syntax: 'implicit' and
'implicit-def'. The 'implicit' keyword is used for the implicit register
operands, and the 'implicit-def' keyword is used for the register operands that
have both the implicit and the define flags set.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10709
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241519 91177308-0d34-0410-b5e6-96231b3b80d8
The vperm2f128/vperm2i128 shuffle mask decoding was not attempting to deal with shuffles that give zero lanes. This patch fixes this so that the assembly printer can provide shuffle comments.
As this decoder is also used in X86ISelLowering for shuffle combining, I've added an early-out to match existing behaviour. The hope is that we can add zero support in the future, this would allow other ops' decodes (e.g. insertps) to be combined as well.
Differential Revision: http://reviews.llvm.org/D10593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241516 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for v8i16 and v16i8 shuffle lowering using the immediate versions of the SSE4A EXTRQ and INSERTQ instructions. Although rather limited (they can only act on the lower 64-bits of the source vectors, leave the upper 64-bits of the result vector undefined and don't have VEX encoded variants), the instructions are still useful for the zero extension of any lane (EXTRQ) or inserting a lane into another vector (INSERTQ). Testing demonstrated that it wasn't typically worth it to use these instructions for v2i64 or v4i32 vector shuffles although they are capable of it.
As well as adding specific pattern matching for the shuffles, the patch uses EXTRQ for zero extension cases where SSE41 isn't available and its more efficient than the SSE2 'unpack' default approach. It also adds shuffle decode support for the EXTRQ / INSERTQ cases when the instructions are handling full byte-sized extractions / insertions.
From this foundation, future patches will be able to make use of the instructions for situations that use their ability to extract/insert at the bit level.
Differential Revision: http://reviews.llvm.org/D10146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241508 91177308-0d34-0410-b5e6-96231b3b80d8
With the completion of D9746 there is now a common implementation of integer signed/unsigned min/max nodes, removing the need for the equivalent X86 specific implementations.
This patch removes the old X86ISD nodes, legalizes the relevant SSE2/SSE41/AVX2/AVX512 instructions for the ISD versions and converts the small amount of existing X86 code.
Differential Revision: http://reviews.llvm.org/D10947
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241506 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a 'run-pass' option to llc, which instructs the compiler to run
one specific code generation pass only.
Llc already has the 'start-after' and the 'stop-after' options, and this new
option complements the other two by making it easier to write tests that want
to invoke a single pass only.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10776
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241476 91177308-0d34-0410-b5e6-96231b3b80d8
Running this after the scheduler enables scheduling
waits later so other ALU instructions can run while
this would be waiting.
When combined with enabling the post-RA scheduler, this
gives about a ~20% improvement on sgemm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241473 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This concludes the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
At this point, the StringRef-form of GNU Triples should only be used in the
public API (including IR serialization) and a couple objects that directly
interact with the API (most notably the Module class). The next step is to
replace these Triple objects with the TargetTuple object that will represent
our authoratative/unambiguous internal equivalent to GNU Triples.
Reviewers: rengolin
Subscribers: llvm-commits, jholewinski, ted, rengolin
Differential Revision: http://reviews.llvm.org/D10962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241472 91177308-0d34-0410-b5e6-96231b3b80d8
This change includes a fix for https://code.google.com/p/chromium/issues/detail?id=499508#c3,
which required updating the visibility for symbols with eliminated definitions.
--Original Commit Message--
Add new EliminateAvailableExternally module pass, which is performed in
O2 compiles just before GlobalDCE, unless we are preparing for LTO.
This pass eliminates available externally globals (turning them into
declarations), regardless of whether they are dead/unreferenced, since
we are guaranteed to have a copy available elsewhere at link time.
This enables additional opportunities for GlobalDCE.
If we are preparing for LTO (e.g. a -flto -c compile), the pass is not
included as we want to preserve available externally functions for possible
link time inlining. The FE indicates whether we are doing an -flto compile
via the new PrepareForLTO flag on the PassManagerBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241466 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have a good way to detect most situations where
DS offsets are usable on SI, so add an option to force using
them even if unsafe for debugging performance problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241462 91177308-0d34-0410-b5e6-96231b3b80d8
Originally added in r139314.
Back then it didn't actually get the address, it got whatever value the
relocation used: address or offset.
The values in different object formats are:
* MachO: Always an offset.
* COFF: Always an address, but when talking about the virtual address of
sections it says: "for simplicity, compilers should set this to zero".
* ELF: An offset for .o files and and address for .so files. In the case of the
.so, the relocation in not linked to any section (sh_info is 0). We can't
really compute an offset.
Some API mappings would be:
* Use getAddress for everything. It would be quite cumbersome. To compute the
address elf has to follow sh_info, which can be corrupted and therefore the
method has to return an ErrorOr. The address of the section is also the same
for every relocation in a section, so we shouldn't have to check the error
and fetch the value for every relocation.
* Use a getValue and make it up to the user to know what it is getting.
* Use a getOffset and:
* Assert for dynamic ELF objects. That is a very peculiar case and it is
probably fair to ask any tool that wants to support it to use ELF.h. The
only tool we have that reads those (llvm-readobj) already does that. The
only other use case I can think of is a dynamic linker.
* Check that COFF .obj files have sections with zero virtual address spaces. If
it turns out that some assembler/compiler produces these, we can change
COFFObjectFile::getRelocationOffset to subtract it. Given COFF format,
this can be done without the need for ErrorOr.
The getRelocationAddress method was never implemented for COFF. It also
had exactly one use in a very peculiar case: a shortcut for adding the
section value to a pcrel reloc on MachO.
Given that, I don't expect that there is any use out there of the C API. If
that is not the case, let me know and I will add it back with the implementation
inlined and do a proper deprecation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241450 91177308-0d34-0410-b5e6-96231b3b80d8
The code in AArch64A57FPLoadBalancing::scavengeRegister() to handle dead defs
was not correctly handling aliased registers. E.g. if the dead def was of D2,
then S2 was not being marked as unavailable, so it could potentially be used
across a live-range in which it would be clobbered.
Patch by Geoff Berry <gberry@codeaurora.org>!
Phabricator: http://reviews.llvm.org/D10900
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241449 91177308-0d34-0410-b5e6-96231b3b80d8
When talking about the virtual address of sections the coff spec says:
... for simplicity, compilers should set this to zero. Otherwise, it is an
arbitrary value that is subtracted from offsets during relocation.
We don't currently subtract it, so check that it is zero.
If some producer does create such files, we can change getRelocationOffset
instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241447 91177308-0d34-0410-b5e6-96231b3b80d8
From the linker's perspective, an available_externally global is equivalent
to an external declaration (per isDeclarationForLinker()), so it is incorrect
to consider it to be a weak definition.
Also clean up some logic in the dead argument elimination pass and clarify
its comments to better explain how its behavior depends on linkage,
introduce GlobalValue::isStrongDefinitionForLinker() and start using
it throughout the optimizers and backend.
Differential Revision: http://reviews.llvm.org/D10941
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241413 91177308-0d34-0410-b5e6-96231b3b80d8
There is some functional change here because it changes target code from
atoi(3) to StringRef::getAsInteger which has error checking. For valid
constraints there should be no difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241411 91177308-0d34-0410-b5e6-96231b3b80d8
Followup to D10433 and D10589 that fixes i8/i16 uint2fp vector conversions by zero extending to i32 and using the sint2fp path (unless the target does actually support uint2fp).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241394 91177308-0d34-0410-b5e6-96231b3b80d8
Although this does cut the number of traces recomputed by ~10% for the
test case mentioned in http://reviews.llvm.org/D10460, it doesn't
make a dent in the overall performance. That example needs to be more
selective when invalidating traces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241393 91177308-0d34-0410-b5e6-96231b3b80d8
This is needed for COFF linkers to distinguish between weak external aliases
and regular symbols with LLVM weak linkage, which are represented as strong
symbols in COFF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241389 91177308-0d34-0410-b5e6-96231b3b80d8
Requested by Eugene Rozenfeld of the LLILC team, this feature allows JIT
clients to skip relocations for selected external symbols by returning ~0ULL
from their symbol resolver. If this value is returned for a given symbol,
RuntimeDyld will skip all relocations for that symbol. The client will be
responsible for applying the skipped relocations manually before the code
is executed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241383 91177308-0d34-0410-b5e6-96231b3b80d8
SHT_NOBITS sections do not have content in an object file. Now the yaml2obj
tool does not accept `Content` field for such sections, and the obj2yaml
tool does not attempt to read the section content from a file.
Restore r241350 and r241352.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241377 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Looking at r241279, I noticed that UpgradedIntrinsics only gets written
to in the following code:
if (UpgradeIntrinsicFunction(&F, NewFn))
UpgradedIntrinsics[&F] = NewFn;
Looking through UpgradeIntrinsicFunction, we always return false OR
NewFn will be set to a different function from our source.
This patch pulls the F != NewFn into UpgradeIntrinsicFunction as an
assert, and removes the check from callers of UpgradeIntrinsicFunction.
Reviewers: rafael, chandlerc
Subscribers: llvm-commits-list
Differential Revision: http://reviews.llvm.org/D10915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241369 91177308-0d34-0410-b5e6-96231b3b80d8
r241350 broke lld tests.
r241352 depends on r241350.
Original messages:
"[ELFYAML] Fix handling SHT_NOBITS sections by obj2yaml/yaml2obj tools"
"[ELFYAML] Make the Size field for .bss section optional"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241354 91177308-0d34-0410-b5e6-96231b3b80d8
