We used to rely on the *eh_sjlj_setjmp instructions to mark that a function
with setjmp/longjmp exception handling clobbers all the registers. But with
the recent reorganization of ARM EH, those eh_sjlj_setjmp instructions are
expanded away earlier, before PEI can see them to determine what registers to
save and restore. Mark the dispatchsetup instruction in the same way, since
that instruction cannot be expanded early. This also more accurately reflects
when the registers are clobbered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146949 91177308-0d34-0410-b5e6-96231b3b80d8
"mov r1, r2, lsl #0" should assemble as "mov r1, r2" even though it's
not strictly legal UAL syntax. It's a common extension and the friendly
thing to do.
rdar://10604663
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146937 91177308-0d34-0410-b5e6-96231b3b80d8
Use information computed while inferring new register classes to emit
accurate, table-driven implementations of getMatchingSuperRegClass().
Delete the old manual, error-prone implementations in the targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146873 91177308-0d34-0410-b5e6-96231b3b80d8
The bad sorting caused a misaligned basic block when building 176.vpr in
ARM mode.
<rdar://problem/10594653>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146767 91177308-0d34-0410-b5e6-96231b3b80d8
This adjustment is already included in the block offsets computed by
BasicBlockInfo, and adjusting again here can cause the pass to loop.
When CreateNewWater splits a basic block, OffsetIsInRange would reject
the new CPE on the next pass because of the too conservative alignment
adjustment. This caused the block to be split again, and so on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146751 91177308-0d34-0410-b5e6-96231b3b80d8
The command line option should be removed, but not until the feature has
gotten a lot of testing. The ARMConstantIslandPass tends to have subtle
bugs that only show up after a while.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146739 91177308-0d34-0410-b5e6-96231b3b80d8
An aligned constant pool entry may require extra alignment padding where
the new water is created. Take that into account when computing offset.
Also consider the alignment of other constant pool entries when
splitting a basic block. Alignment padding may make it necessary to
move the split point higher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146609 91177308-0d34-0410-b5e6-96231b3b80d8
In addition to improving the representation, this adds support for assembly
parsing of these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146588 91177308-0d34-0410-b5e6-96231b3b80d8
r0 = mov #0
r0 = moveq #1
Then the second instruction has an implicit data dependency on the first
instruction. Sadly I have yet to come up with a small test case that
demonstrate the post-ra scheduler taking advantage of this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146583 91177308-0d34-0410-b5e6-96231b3b80d8
Work in progress. Parsing for non-writeback, single spaced register lists
works now. The rest have the representations better factored, but still
need more to be able to parse properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146579 91177308-0d34-0410-b5e6-96231b3b80d8
When 'cmp rn #imm' doesn't match due to the immediate not being representable,
but 'cmn rn, #-imm' does match, use the latter in place of the former, as
it's equivalent.
rdar://10552389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146567 91177308-0d34-0410-b5e6-96231b3b80d8
to finalize MI bundles (i.e. add BUNDLE instruction and computing register def
and use lists of the BUNDLE instruction) and a pass to unpack bundles.
- Teach more of MachineBasic and MachineInstr methods to be bundle aware.
- Switch Thumb2 IT block to MI bundles and delete the hazard recognizer hack to
prevent IT blocks from being broken apart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146542 91177308-0d34-0410-b5e6-96231b3b80d8
undefined result. This adds new ISD nodes for the new semantics,
selecting them when the LLVM intrinsic indicates that the undef behavior
is desired. The new nodes expand trivially to the old nodes, so targets
don't actually need to do anything to support these new nodes besides
indicating that they should be expanded. I've done this for all the
operand types that I could figure out for all the targets. Owners of
various targets, please review and let me know if any of these are
incorrect.
Note that the expand behavior is *conservatively correct*, and exactly
matches LLVM's current behavior with these operations. Ideally this
patch will not change behavior in any way. For example the regtest suite
finds the exact same instruction sequences coming out of the code
generator. That's why there are no new tests here -- all of this is
being exercised by the existing test suite.
Thanks to Duncan Sands for reviewing the various bits of this patch and
helping me get the wrinkles ironed out with expanding for each target.
Also thanks to Chris for clarifying through all the discussions that
this is indeed the approach he was looking for. That said, there are
likely still rough spots. Further review much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146466 91177308-0d34-0410-b5e6-96231b3b80d8
Constant pool entries with different alignment may cause more alignment
padding to be inserted. Compute the amount of padding needed, and try to
pick the location that requires the least amount of padding.
Also take the extra padding into account when the water is above the
use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146458 91177308-0d34-0410-b5e6-96231b3b80d8
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146436 91177308-0d34-0410-b5e6-96231b3b80d8
These modifiers simply select either the low or high D subregister of a Neon
Q register. I've also removed the unimplemented 'p' modifier, which turns out
to be a bit different than the comment here suggests and as far as I can tell
was only intended for internal use in Apple's version of gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146417 91177308-0d34-0410-b5e6-96231b3b80d8
Downgrade the alignment of the initial constant island when constant
pool entries are moved elsewhere.
This is all gated by -arm-align-constant-islands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146391 91177308-0d34-0410-b5e6-96231b3b80d8
Order constant pool entries by descending alignment in the initial
island to ensure packing and correct alignment. When the command line
flag is set, also align the basic block containing the constant pool
entries.
This is only a partial implementation of constant island alignment. More
to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146375 91177308-0d34-0410-b5e6-96231b3b80d8
The split point is picked such that the newly created water has the same
alignment as the function. This makes the island suitable for constant
pool entries with potentially higher alignment.
This also fixes an issue where the basic block was split one instruction
too late, causing nonconvergence of the algorithm.
<rdar://problem/10550705>
There is still an issue with correctly packing differently aligned
entries in the island.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146314 91177308-0d34-0410-b5e6-96231b3b80d8
Backwards compatibility with 'gas'. #imm is the preferered and documented
syntax, but lots of existing code uses the '$' prefix, so we should
support it if we can.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146285 91177308-0d34-0410-b5e6-96231b3b80d8
When the immediate operand of an AND or BIC instruction isn't representable
in the immediate field of the instruction, but the bitwise negation of the
immediate is, assemble the instruction as the inverse operation instead
with the inverted immediate as the operand.
rdar://10550057
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146283 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the instructions into fixed writeback and register-stride
writeback variants to simplify the offset operand (no more optional
register operand using reg0). This is a simpler representation and allows
the assembly parser to more easily handle these instructions.
Add tests for the instruction variants now supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146278 91177308-0d34-0410-b5e6-96231b3b80d8
It is not used any more. We are tracking inline assembly misalignments
directly through the BBInfo.Unalign and KnownBits fields.
A simple conservative size estimate is not good enough since it can
cause alignment padding to be underestimated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146124 91177308-0d34-0410-b5e6-96231b3b80d8
Compute alignment padding before and after basic blocks dynamically.
Heed basic block alignment.
This simplifies bookkeeping because we don't have to constantly add and
remove padding from BBInfo.Size. It also makes it possible to track the
extra known alignment bits we get after a tBR_JTr terminator and when
entering an aligned basic block.
This makes the ARMConstantIslandPass aware of aligned basic blocks.
It is tricky to model block alignment correctly when dealing with inline
assembly and tBR_JTr instructions that have variable size. If inline
assembly turns out to be smaller than expected, that may cause following
alignment padding to be larger than expected. This could cause constant
pool entries to move out of range.
To avoid that problem, we use the worst case alignment padding following
inline assembly. This may cause slightly suboptimal constant island
placement in aligned basic blocks following inline assembly. Normal
functions should be unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146118 91177308-0d34-0410-b5e6-96231b3b80d8
When the file isn't being built with subsections-via-symbols, symbol
differences involving non-local symbols can be resolved more aggressively.
Needed for gas compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146054 91177308-0d34-0410-b5e6-96231b3b80d8
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146026 91177308-0d34-0410-b5e6-96231b3b80d8
The block offset can be computed from the previous block. That is more
robust than keeping track of a delta.
Eliminate one redundant AdjustBBOffsetsAfter call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146018 91177308-0d34-0410-b5e6-96231b3b80d8
Data type suffix aliasing. Previously handled via lots of instruction
aliases. Cleanup of those forthcoming.
rdar://10435076
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146007 91177308-0d34-0410-b5e6-96231b3b80d8
No functional change yet. Will be implementing range-checked immediates
for better diagnostics and disambiguation of instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145994 91177308-0d34-0410-b5e6-96231b3b80d8
1. Added opcode BUNDLE
2. Taught MachineInstr class to deal with bundled MIs
3. Changed MachineBasicBlock iterator to skip over bundled MIs; added an iterator to walk all the MIs
4. Taught MachineBasicBlock methods about bundled MIs
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145975 91177308-0d34-0410-b5e6-96231b3b80d8
This pseudo-instruction contains a .align directive in its expansion, so
the total size may vary by 2 bytes.
It is too difficult to accurately keep track of this alignment
directive, just use the worst-case size instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145971 91177308-0d34-0410-b5e6-96231b3b80d8
ARMConstantIslandPass may sometimes leave empty constant islands behind
(it really shouldn't). Remove the alignment from the empty islands so
the size calculations are still correct.
This should fix the many Thumb1 assembler errors in the nightly test
suite.
The reduced test case for this problem is way too big. That is to be
expected for ARMConstantIslandPass bugs.
<rdar://problem/10534709>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145970 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, all ARM::CONSTPOOL_ENTRY instructions had a hardwired
alignment of 4 bytes emitted by ARMAsmPrinter. Now the same alignment
is set on the basic block.
This is in preparation of supporting ARM constant pool islands with
different alignments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145890 91177308-0d34-0410-b5e6-96231b3b80d8
Whether a fixup needs relaxation for the associated instruction is a
target-specific function, as the FIXME indicated. Create a hook for that
and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145881 91177308-0d34-0410-b5e6-96231b3b80d8
Not right yet, as the rules for when to relax in the MCAssembler aren't
(yet) correct for ARM. This is a step in the proper direction, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145871 91177308-0d34-0410-b5e6-96231b3b80d8
Combined destination and first source operand for f32 variant of the VMUL
(by scalar) instruction.
rdar://10522016
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145842 91177308-0d34-0410-b5e6-96231b3b80d8
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
argument value type. Otherwise, the sign/zero-extend has no effect on arguments
passed via the stack (i.e., undefined high-order bits).
rdar://10515467
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145701 91177308-0d34-0410-b5e6-96231b3b80d8
The alias pseudos need cleaned up for size suffix handling, but this gets
the basics working. Will be cleaning up and adding more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145655 91177308-0d34-0410-b5e6-96231b3b80d8
uninitialized: GCC doesn't understand that the variables are only used
if !UseImm, in which case they have been initialized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145239 91177308-0d34-0410-b5e6-96231b3b80d8
We don't (yet) have the granularity in the fixups to be specific about which
bitranges are affected. That's a future cleanup, but we're not there yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144852 91177308-0d34-0410-b5e6-96231b3b80d8
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144788 91177308-0d34-0410-b5e6-96231b3b80d8
The EmitBasePointerRecalculation function has 2 problems, one minor and one
fatal. The minor problem is that it inserts the code at the setjmp
instead of in the dispatch block. The fatal problem is that at the point
where this code runs, we don't know whether there will be a base pointer,
so the entire function is a no-op. The base pointer recalculation needs to
be handled as it was before, by inserting a pseudo instruction that gets
expanded late.
Most of the support for the old approach is still here, but it no longer
has any connection to the eh_sjlj_dispatchsetup intrinsic. Clean up the
parts related to the intrinsic and just generate the pseudo instruction
directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144781 91177308-0d34-0410-b5e6-96231b3b80d8
This will widen 32-bit register vmov instructions to 64-bit when
possible. The 64-bit vmovd instructions can then be translated to NEON
vorr instructions by the execution dependency fix pass.
The copies are only widened if they are marked as clobbering the whole
D-register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144734 91177308-0d34-0410-b5e6-96231b3b80d8
For example,
vld1.f64 {d2-d5}, [r2,:128]!
Should be equivalent to:
vld1.f64 {d2,d3,d4,d5}, [r2,:128]!
It's not documented syntax in the ARM ARM, but it is consistent with what's
accepted for VLDM/VSTM and is unambiguous in meaning, so it's a good thing to
support.
rdar://10451128
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144727 91177308-0d34-0410-b5e6-96231b3b80d8
When the 3rd operand is not a low-register, and the first two operands are
the same low register, the parser was incorrectly trying to use the 16-bit
instruction encoding.
rdar://10449281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144679 91177308-0d34-0410-b5e6-96231b3b80d8
Make it easier to deal with aliases for instructions that do require a suffix
but accept more specific variants of the same size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144588 91177308-0d34-0410-b5e6-96231b3b80d8
violating a dependency is to emit all loads prior to stores. This would likely
cause a great deal of spillage offsetting any potential gains.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144585 91177308-0d34-0410-b5e6-96231b3b80d8
Canonicallize on the non-suffixed form, but continue to accept assembly that
has any correctly sized type suffix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144583 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyAddress to handle either a 12-bit unsigned offset or the ARM +/-imm8
offsets (addressing mode 3). This enables a load followed by an integer
extend to be folded into a single load.
For example:
ldrb r1, [r0] ldrb r1, [r0]
uxtb r2, r1 =>
mov r3, r2 mov r3, r1
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144488 91177308-0d34-0410-b5e6-96231b3b80d8
These immediate operands all use the same simple logic for rendering to
MCInst, so have them share the method for doing so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144439 91177308-0d34-0410-b5e6-96231b3b80d8
It's ignored by the assembler when present, but is legal syntax. Other
instructions have something similar, but for some mnemonics it's
only sometimes not significant, so this quick check in the parser will
need refactored into something more robust soon-ish. This gets some
basics working in the meantime.
Partial for rdar://10435264
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144422 91177308-0d34-0410-b5e6-96231b3b80d8
Get the source register that isn't tied to the destination register correct,
even when the assembly source operand order is backwards.
rdar://10428630
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144322 91177308-0d34-0410-b5e6-96231b3b80d8
Use the getIdentifier() method of the token, not getString(), otherwise
we keep the quotes as part of the symbol name, which we don't want.
rdar://10428015
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144315 91177308-0d34-0410-b5e6-96231b3b80d8
