Tests to follow.
PIC with small code model and EH frame handling will not work with multiple modules. There are also some rough edges to be smoothed out for remote target support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191722 91177308-0d34-0410-b5e6-96231b3b80d8
on ADD16rr opcodes, if src1 != src, since that would cause
convertToThreeAddress to try to create a virtual register. This is not
permitted after register allocation, which is when the X86FixupLEAs pass
runs.
This patch fixes PR16785.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191711 91177308-0d34-0410-b5e6-96231b3b80d8
SEC_OFFSET from the beginning of the section so go ahead and emit
a label at the beginning of each one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191710 91177308-0d34-0410-b5e6-96231b3b80d8
Currently it will insert an illegal bitcast.
Arguably, the address space argument should be
added for the creation case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191702 91177308-0d34-0410-b5e6-96231b3b80d8
The test's output doesn't change, but this ensures
this is actually hit with a different address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191701 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds Direct Object Emission support for I8 instructions: andi.b, bmnzi.b, bmzi.b, bseli.b, nori.b, ori.b, shf.{b,h,w} and xori.b.
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191688 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds Direct Object Emission support for 2R instructions: nloc.{b,h,w}, nlzc.{b,h,w}, pcnt.{b,w,d}.
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191685 91177308-0d34-0410-b5e6-96231b3b80d8
Defines away the issue where cast<Instruction> would fail because constant
folding happened. Also slightly cleaner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191674 91177308-0d34-0410-b5e6-96231b3b80d8
Inspired by the object from the SLPVectorizer. This found a minor bug in the
debug loc restoration in the vectorizer where the location of a following
instruction was attached instead of the location from the original instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191673 91177308-0d34-0410-b5e6-96231b3b80d8
For targets that have instruction itineraries this means no change. Targets
that move over to the new schedule model will use be able the new schedule
module for instruction latencies in the if-converter (the logic is such that if
there is no itineary we will use the new sched model for the latencies).
Before, we queried "TTI->getInstructionLatency()" for the instruction latency
and the extra prediction cost. Now, we query the TargetSchedule abstraction for
the instruction latency and TargetInstrInfo for the extra predictation cost. The
TargetSchedule abstraction will internally call "TTI->getInstructionLatency" if
an itinerary exists, otherwise it will use the new schedule model.
ATTENTION: Out of tree targets!
(I will also send out an email later to LLVMDev)
This means, if your target implements
unsigned getInstrLatency(const InstrItineraryData *ItinData,
const MachineInstr *MI,
unsigned *PredCost);
and returns a value for "PredCost", you now also need to implement
unsigned getPredictationCost(const MachineInstr *MI);
(if your target uses the IfConversion.cpp pass)
radar://15077010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191671 91177308-0d34-0410-b5e6-96231b3b80d8
when it was actually a Constant*.
There are quite a few other casts to Instruction that might have the same problem,
but this is the only one I have a test case for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191668 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason, adding definitions for these load and store
instructions changed whether some of the build bots matched
comparisons as signed or unsigned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191663 91177308-0d34-0410-b5e6-96231b3b80d8
The only thing this does on its own is make the definitions of RISB[HL]G
a bit more precise. Those instructions are only used by the MC layer at
the moment, so no behavioral change is intended. The class is needed by
later patches though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191660 91177308-0d34-0410-b5e6-96231b3b80d8
Use subreg_hNN and subreg_lNN for the high and low NN bits of a register.
List the low registers first, so that subreg_l32 also means the low 32
bits of a 128-bit register.
Floats are stored in the upper 32 bits of a 64-bit register, so they
should use subreg_h32 rather than subreg_l32.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191659 91177308-0d34-0410-b5e6-96231b3b80d8
I'm about to add support for high-word operations, so it seemed better
for the low-word registers to have names like R0L rather than R0W.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191655 91177308-0d34-0410-b5e6-96231b3b80d8
Add VEX_LIG to scalar FMA4 instructions.
Use VEX_LIG in some of the inheriting checks in disassembler table generator.
Make use of VEX_L_W, VEX_L_W_XS, VEX_L_W_XD contexts.
Don't let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from their non-L forms unless VEX_LIG is set.
Let VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE inherit from all of their non-L or non-W cases.
Increase ranking on VEX_L_W, VEX_L_W_XS, VEX_L_W_XD, VEX_L_W_OPSIZE so they get chosen over non-L/non-W forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191649 91177308-0d34-0410-b5e6-96231b3b80d8
SDNode destructors are never called. As an optimization use AtomicSDNode's
internal storage if we have a small number of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191636 91177308-0d34-0410-b5e6-96231b3b80d8
We were completely ignoring the unorder/ordered attributes of condition
codes and also incorrectly lowering seto and setuo.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191603 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG will now attempt to inverse an illegal conditon in order to
find a legal one and if that doesn't work, it will attempt to swap the
operands using the inverted condition.
There are no new test cases for this, but a nubmer of the existing R600
tests hit this path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191602 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for targets like R600, which only support GT, GE, NE, and EQ
condition codes as it removes the need to handle unsupported condition
codes in target specific code.
There are no tests with this commit, but R600 has been updated to take
advantage of this new feature, so its existing selectcc tests are now
testing the swapped operands path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191601 91177308-0d34-0410-b5e6-96231b3b80d8
Interpreting the results of this function is not very intuitive, so I
cleaned it up to make it more clear whether or not a SETCC op was
legalized and how it was legalized (either by swapping LHS and RHS or
replacing with AND/OR).
This patch does change functionality in the LHS and RHS swapping case,
but unfortunately there are no in-tree tests for this. However, this
patch is a prerequisite for R600 to take advantage of the LHS and RHS
swapping, so tests will be added in subsequent commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191600 91177308-0d34-0410-b5e6-96231b3b80d8
We treat TBAA tags as struct-path aware TBAA format when the first operand
is a MDNode and the tag has 3 or more operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191593 91177308-0d34-0410-b5e6-96231b3b80d8
of loops.
Previously, two consecutive calls to function "func" would result in the
following sequence of instructions:
1. load $16, %got(func)($gp) // load address of lazy-binding stub.
2. move $25, $16
3. jalr $25 // jump to lazy-binding stub.
4. nop
5. move $25, $16
6. jalr $25 // jump to lazy-binding stub again.
With this patch, the second call directly jumps to func's address, bypassing
the lazy-binding resolution routine:
1. load $25, %got(func)($gp) // load address of lazy-binding stub.
2. jalr $25 // jump to lazy-binding stub.
3. nop
4. load $25, %got(func)($gp) // load resolved address of func.
5. jalr $25 // directly jump to func.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191591 91177308-0d34-0410-b5e6-96231b3b80d8
Currently foldSelectICmpAndOr asserts if the "or" involves a vector
containing several of the same power of two. We can easily avoid this by
only performing the fold on integer types, like foldSelectICmpAnd does.
Fixes <rdar://problem/15012516>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191552 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the command line argument "struct-path-tbaa" since we should not depend
on command line argument to decide which format the IR file is using. Instead,
we check the first operand of the tbaa tag node, if it is a MDNode, we treat
it as struct-path aware TBAA format, otherwise, we treat it as scalar TBAA
format.
When clang starts to use struct-path aware TBAA format no matter whether
struct-path-tbaa is no, and we can auto-upgrade existing bc files, the support
for scalar TBAA format can be dropped.
Existing testing cases are updated to use the struct-path aware TBAA format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191538 91177308-0d34-0410-b5e6-96231b3b80d8
We were previously using getFirstInsertionPt to insert PHI
instructions when vectorizing, but getFirstInsertionPt also skips past
landingpads, causing this to generate invalid IR.
We can avoid this issue by using getFirstNonPHI instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191526 91177308-0d34-0410-b5e6-96231b3b80d8
The backend tries to use block operations like MVC, NC, OC and XC for
simple scalar operations. For correctness reasons, it rejects any case
in which the regions might partially overlap. However, for performance
reasons, it should also reject cases where the regions might be equal,
since the instruction might then not use the fast path.
This fixes a performance regression seen in bzip2. We may want to limit
the optimisation even more in future, or even remove it entirely, but I'll
try with this for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191525 91177308-0d34-0410-b5e6-96231b3b80d8
The backend previously folded offsets into PC-relative addresses
whereever possible. That's the right thing to do when the address
can be used directly in a PC-relative memory reference (using things
like LRL). But if we have a register-based memory reference and need
to load the PC-relative address separately, it's better to use an anchor
point that could be shared with other accesses to the same area of the
variable.
Fixes a FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191524 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is lowered into an equivalent INSERT_VECTOR_ELT which is
further lowered into a sequence of insert.w's on MIPS32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191521 91177308-0d34-0410-b5e6-96231b3b80d8
As specified in A8.8.72/A8.8.73/A8.8.74 in the ARM ARM, all variants of the ARM LDRD instruction have the following two constraints:
LDRD<c> <Rt>, <Rt2>, ...
(a) Rt must be even-numbered and not r14
(b) Rt2 must be R(t+1)
If those two constraints are not met the result of executing the instruction will be unpredictable.
Constraint (b) was already enforced, this commit adds support for constraint (a).
Fixes rdar://14479793.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191520 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is lowered into an equivalent BUILD_VECTOR which is further
lowered into a sequence of insert.w's on MIPS32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191519 91177308-0d34-0410-b5e6-96231b3b80d8
For v4f32 and v2f64, INSERT_VECTOR_ELT is matched by a pseudo-insn which is
later expanded to appropriate insve.[wd] insns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191515 91177308-0d34-0410-b5e6-96231b3b80d8
For v4f32 and v2f64, EXTRACT_VECTOR_ELT is matched by a pseudo-insn which may
be expanded to subregister copies and/or instructions as appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191514 91177308-0d34-0410-b5e6-96231b3b80d8
This change fixes the problem reported in pr17380 and re-add the dagcombine
transformation ensuring that the value types are always legal if the
transformation is triggered after Legalization took place.
Added the test case from pr17380.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191509 91177308-0d34-0410-b5e6-96231b3b80d8
This file contains notes about the instruction selection for MSA. For example,
it notes that ilvl.d is cannot be selected because ilvev.d covers the same
cases and is selected instead of ilvl.d.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191507 91177308-0d34-0410-b5e6-96231b3b80d8
LDRD<c> <Rt>, <Rt2>, <label>
LDRD<c> <Rt>, <Rt2>, [<Rn>{, #+/-<imm>}]
LDRD<c> <Rt>, <Rt2>, [<Rn>], #+/-<imm>
LDRD<c> <Rt>, <Rt2>, [<Rn>, #+/-<imm>]!
As specified in A8.8.72/A8.8.73 in the ARM ARM, the T1 encoding has a constraint which enforces that Rt != Rt2.
If this constraint is not met the result of executing the instruction will be unpredictable.
Fixes rdar://14479780.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191504 91177308-0d34-0410-b5e6-96231b3b80d8
lowerMSABinaryIntr, lowerMSABinaryImmIntr, lowerMSABranchIntr,
and lowerMSAUnaryIntr were trivially small functions. Inlined them into
their callers.
lowerMSASplat now takes its callers SDLoc instead of making a new one.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191503 91177308-0d34-0410-b5e6-96231b3b80d8
This is a patch to add capability to llvm-objdump to dump COFF Import Table
entries, so that we can write tests for LLD checking Import Table contents.
llvm-objdump did not print anything but just file name if the format is COFF
and -private-headers option is given. This is a patch adds capability for
dumping DLL Import Table, which is specific to the COFF format.
In this patch I defined a new iterator to iterate over import table entries.
Also added a few functions to COFFObjectFile.cpp to access fields of the entry.
Differential Revision: http://llvm-reviews.chandlerc.com/D1719
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191472 91177308-0d34-0410-b5e6-96231b3b80d8
CFE produces it to indicate artificial locations.
c.f.: DWARF standard, Table 6.2:
line -- An unsigned integer indicating a source line number. Lines are numbered beginning at 1. The compiler may emit the value 0 in cases where an instruction cannot be attributed to any source line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191471 91177308-0d34-0410-b5e6-96231b3b80d8
When generating code for shared libraries, even local calls may be
intercepted, so we need a nop after the call for the linker to fix up the
TOC. Test case adapted from the one provided in PR17354.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191440 91177308-0d34-0410-b5e6-96231b3b80d8
When asked to pad an irregular number of bytes, we should fill with
zeros. This is consistent with the behavior specified in the AIX
Assembler Language Reference as well as other LLVM and binutils
assemblers.
N.B. There is a small deviation from binutils' PPC assembler:
when handling pads which are greater than 4 bytes but not mod 4,
binutils will not emit any NOP sequences at all and only use zeros.
This may or may not be a bug but there is no excellent rationale as to
why that behavior is important to emulate. If that behavior is needed,
we can change writeNopData() to behave in the same way.
This fixes PR17352.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191426 91177308-0d34-0410-b5e6-96231b3b80d8
Encodings were checked against the Power ISA documents and double
checked against binutils.
This fixes PR17350.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191419 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first set of instructions with a ".b" modifier thus we need to add the required code to disassemble a MSA128B register class.
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191415 91177308-0d34-0410-b5e6-96231b3b80d8
In more detail, this patch adds the ability to parse, encode and decode MSA registers ($w0-$w31). The format of 2RF instructions (MipsMSAInstrFormat.td) was updated so that we could attach a test case to this patch i.e., the test case parses, encodes and decodes 2 MSA instructions. Following patches will add the remainder of the instructions.
Note that DecodeMSA128BRegisterClass is missing from MipsDisassembler.td because it's not yet required at this stage and having it would cause a compiler warning (unused function).
Patch by Matheus Almeida
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191412 91177308-0d34-0410-b5e6-96231b3b80d8
Generally, it is desirable to distribute (a + b) * c to a*c + b*c for
ARM with VMLx forwarding, where a, b and c are vectors.
However, for (a + b)*(a + b), distribution will result in one extra
instruction.
With distribution:
x = a + b (add)
y = a * x (mul)
z = y + b * y (mla)
Without distribution:
x = a + b (add)
z = x * x (mul)
This patch checks if a mul is a square of add/sub. If yes, skip
distribution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191410 91177308-0d34-0410-b5e6-96231b3b80d8
(shl (zext (shr A, X)), X) => (zext (shl (shr A, X), X)).
The rule only triggers when there are no other uses of the
zext to avoid materializing more instructions.
This helps the DAGCombiner understand that the shl/shr
sequence can then be converted into an and instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191393 91177308-0d34-0410-b5e6-96231b3b80d8
Ideally, the machinel model is added at the time the instructions are
defined. But many instructions in X86InstrSSE.td still need a model.
Without this workaround the scheduler asserts because x86 already has
itinerary classes for these instructions, indicating they should be
modeled by the scheduler. Since we use the new machine model for other
instructions, it expects a new machine model for these too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191391 91177308-0d34-0410-b5e6-96231b3b80d8
Put them under a separate flag for experimentation. They are more likely to
interfere with loop vectorization which happens later in the pass pipeline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191371 91177308-0d34-0410-b5e6-96231b3b80d8
Another patch to avoid duplication of encoding information. Things like
NILF, NILL and NILH are used as both 32-bit and 64-bit instructions.
Here the 64-bit versions are defined as aliases of the 32-bit ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191369 91177308-0d34-0410-b5e6-96231b3b80d8
The binutils assembler supports a mode called DOLLAR_DOT which treats
the dollar sign token as a reference to the current program counter if
the dollar sign doesn't precede a constant or identifier.
This commit adds a new MCAsmInfo flag stating whether or not a given
target supports this interpretation of the dollar sign token; by
default, this flag is not enabled.
Further, enable this flag for PPC. The system assembler for AIX and
binutils both support using the dollar sign in this manner.
This fixes PR17353.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191368 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to r191364, but for calls. This patch also removes the shortening
of BRASL to BRAS within a TU. Doing that was a bit controversial internally,
since there's a strong expectation with the z assembler that WYWIWYG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191366 91177308-0d34-0410-b5e6-96231b3b80d8
Another patch to reduce the duplication of encoding information.
Rather than define separate patterns for truncating 64-bit stores,
use the 32-bit stores with a subreg. No behavioral changed intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191365 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first of a few patches to reduce the dupliation of encoding
information. The return instruction is a normal BR in which one of the
registers is fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191364 91177308-0d34-0410-b5e6-96231b3b80d8
When loading immediates into a GR32, the port prefered LHI, followed by
LLILH or LLILL, followed by IILF. LHI and IILF are natural 32-bit
operations, but LLILH and LLILL also clear the upper 32 bits of the register.
This was represented as taking a 32-bit subreg of a 64-bit assignment.
Using subregs for something as simple as a move immediate was probably
a bad idea. Also, I have patches to add support for the high-word facility,
and we don't want something like LLILH and LLILL to stop the high word of
the same GPR from being used.
This patch therefore uses LHI and IILF to begin with and adds a late
machine-specific pass to use LLILH and LLILL if the other half of the
register is not live. The high-word patches extend this behavior to
IIHF, LLIHL and LLIHH.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191363 91177308-0d34-0410-b5e6-96231b3b80d8
PEI inserts a save/restore sequence for the link register, according to the
information it gets from the MachineRegisterInfo.
MachineRegisterInfo is populated by the VirtRegMap pass.
This pass was not aware of noreturn calls and was registering the definitions of
these calls the same way as regular operations.
Modify VirtRegPass so that it does not set the isPhysRegUsed information for
registers only defined by noreturn calls.
The rational is that a noreturn call is the "last instruction" of the program
(if it returns the behavior is undefined), so everything that is defined by it
cannot be used and will not interfere with anything else. Therefore, it is
pointless to account for then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191349 91177308-0d34-0410-b5e6-96231b3b80d8
This is being disabled because it is no longer needed for
performance. It is only used by postRAscheduler which is also planned
for removal, and it is implemented with an out-dated view of register
liveness. It consideres aliases instead of register units, assumes
valid kill flags, and assumes implicit uses on partial register
defs. Kill flags and implicit operands are error prone and impossible
to verify. We should gradually eliminate dependence on them in the
postRA phases.
Targets that still benefit from this should move to the MI
scheduler. If that doesn't solve the problem, then we should add a
hook to regalloc to optimize reload placement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191348 91177308-0d34-0410-b5e6-96231b3b80d8
This code isn't ready to deal with allocation functions where the return is not
the allocated pointer. The checks below will reject posix_memalign anyways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191319 91177308-0d34-0410-b5e6-96231b3b80d8
This is safe per C++11 18.6.1.1p3: [operator new returns] a non-null pointer to
suitably aligned storage (3.7.4), or else throw a bad_alloc exception. This
requirement is binding on a replacement version of this function.
Brings us a tiny bit closer to eliminating more vector push_backs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191310 91177308-0d34-0410-b5e6-96231b3b80d8
Most constant BUILD_VECTOR's are matched using ComplexPatterns which cover
bitcasted as well as normal vectors. However, it doesn't seem to be possible to
match ldi.[bhwd] in a type-agnostic manner (e.g. to support the widest range of
immediates, it should be possible to use ldi.b to load v2i64) using TableGen so
ldi.[bhwd] is matched using custom code in MipsSEISelDAGToDAG.cpp
This made the majority of the constant splat BUILD_VECTOR lowering redundant.
The only transformation remaining for constant splats is when an (up-to) 32-bit
constant splat is possible but the value does not fit into a 10-bit signed
integer. In this case, the BUILD_VECTOR is transformed into a bitcasted
BUILD_VECTOR so that fill.[bhw] can be used to splat the vector from a GPR32
register (which is initialized using the usual lui/addui sequence).
There are no additional tests since this is a re-implementation of previous
functionality. The change is intended to make it easier to implement some of
the upcoming instruction selection patches since they can rely on existing
support for BUILD_VECTOR's in the DAGCombiner.
compare_float.ll changed slightly because a BITCAST is no longer
introduced during legalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191299 91177308-0d34-0410-b5e6-96231b3b80d8
MIPS SelectionDAG changes:
* Added VCEQ, VCL[ET]_[SU] nodes to represent vector comparisons that produce a bitmask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191286 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure that the code that handles the constant addresses is run for the
GEPs. This just refactors that code and then calls it for the GEPs that are
collected during the iteration.
<rdar://problem/12445434>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191281 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Ana Pazos.
1.Added support for v1ix and v1fx types.
2.Added Scalar Pairwise Reduce instructions.
3.Added initial implementation of Scalar Arithmetic instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191263 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes a copy from a vreg -> vreg sneaks into the middle of a terminator
sequence. It is safe to slice this into the stack protector success bb.
This fixes PR16979.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191260 91177308-0d34-0410-b5e6-96231b3b80d8
The recursive nature of the address selection code can cause the stack to
explode if there is a long chain of GEPs. Convert the recursive bit into a
iterative method to avoid this.
<rdar://problem/12445434>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191252 91177308-0d34-0410-b5e6-96231b3b80d8
a) Make sure we are emitting the correct section in our section labels
when we begin the module.
b) Make sure we are emitting the correct pubtypes section in the
presence of gnu pubtypes.
c) For C++ struct, union, class, and enumeration types are default
external.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191225 91177308-0d34-0410-b5e6-96231b3b80d8
The size of common symbols is now tracked correctly, so they can be listed in the arange section without needing knowledge of other following symbols.
.comm (and .lcomm) do not indicate to the system assembler any particular section to use, so we have to treat them as having no section.
Test case update to account for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191210 91177308-0d34-0410-b5e6-96231b3b80d8
This is a small step that may enable some simplifications in producer
(DWARFContext) and consumer (DWARFCompileUnit and other places) by
making a more complete abstraction around the data and relocations for a
section. Small initial steps could include simple changes such as
passing the pair to DWARFCompileUnit's ctor rather than passing the data
and relocs separately. I don't intend to pursue any such changes
immediately, however.
The motivation for doing this now is that type unit dumping will need to
deal with these data+reloc pairs moreso than the existing dumping
support has needed to associate the data as type unit sections are named
the same (debug_types) and comdat group folded. So to implement dumping
and reloc handling we'll need a mapping of section->data+relocs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191209 91177308-0d34-0410-b5e6-96231b3b80d8
Revert 191122 - with extra checks we are allowed to vectorize math library
function calls.
Standard library indentifiers are reserved names so functions with external
linkage must not overrided them. However, functions with internal linkage can.
Therefore, we can vectorize calls to math library functions with a check for
external linkage and matching signature. This matches what we do during
SelectionDAG building.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191206 91177308-0d34-0410-b5e6-96231b3b80d8
Overflow doesn't affect the correctness of equalities. Computing this is cheap,
we just reuse the computation for the inbounds case and try to peel of more
non-inbounds GEPs. This pattern is unlikely to ever appear in code generated by
Clang, but SCEV occasionally produces it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191200 91177308-0d34-0410-b5e6-96231b3b80d8
Changes to MIPS SelectionDAG:
* Added nodes VEXTRACT_[SZ]EXT_ELT to represent extract and extend in a single
operation and implemented the DAG combines necessary to fold sign/zero
extends into the extract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191199 91177308-0d34-0410-b5e6-96231b3b80d8
An unrelated change crept in because 'svn revert' isn't recursive by default.
The unrelated changes have been reverted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191193 91177308-0d34-0410-b5e6-96231b3b80d8
Note: There's a later patch on my branch that re-implements this to select
build_vector without the custom SelectionDAG nodes. The future patch avoids
the constant-folding problems stemming from the custom node (i.e. it doesn't
need to re-implement all the DAG combines related to BUILD_VECTOR).
Changes to MIPS specific SelectionDAG nodes:
* Added VSPLAT
This is a special case of BUILD_VECTOR that covers the case the
BUILD_VECTOR is a splat operation.
* Added VSPLATD
This is a special case of VSPLAT that handles the cases when v2i64 is legal
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191191 91177308-0d34-0410-b5e6-96231b3b80d8
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191175 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LLVM would crash when trying to come up with a relocation type for
assembly like:
movabsq $V@TPOFF, %rax
Instead, we say the relocation type is R_X86_64_TPOFF64.
Fixes PR17274.
Reviewers: dblaikie, nrieck, rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191163 91177308-0d34-0410-b5e6-96231b3b80d8
Pre-increment loads are microcoded on the A2, and the address increment occurs
only after the load completes. As a result, the latency of the GPR address
update is an additional 2 cycles on top of the load latency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191156 91177308-0d34-0410-b5e6-96231b3b80d8
SROA wants to convert any types of equivalent widths but it's not possible to
convert vectors of pointers to an integer scalar with a single cast. As a
workaround we add a bitcast to the corresponding int ptr type first. This type
of cast used to be an edge case but has become common with SLP vectorization.
Fixes PR17271.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191143 91177308-0d34-0410-b5e6-96231b3b80d8
Allow binutils .type and .section directives to take the following
forms:
- @<type>
- %<type>
- "<type>"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191134 91177308-0d34-0410-b5e6-96231b3b80d8
In AVX 256bit vectors are valid vectors and therefore the Type Legalizer doesn't
split the VSELECT and SETCC nodes. AVX only supports MIN/MAX on 128bit vectors
and this fix enables vector splitting for this special case in the X86 DAG
Combiner.
This fix is related to PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191131 91177308-0d34-0410-b5e6-96231b3b80d8
The Type Legalizer recognizes that VSELECT needs to be split, because the type
is to wide for the given target. The same does not always apply to SETCC,
because less space is required to encode the result of a comparison. As a result
VSELECT is split and SETCC is unrolled into scalar comparisons.
This commit fixes the issue by checking for VSELECT-SETCC patterns in the DAG
Combiner. If a matching pattern is found, then the result mask of SETCC is
promoted to the expected vector mask for the given target. This mask has usually
te same size as the VSELECT return type (except for Intel KNL). Now the type
legalizer will split both VSELECT and SETCC.
This allows the following X86 DAG Combine code to sucessfully detect the MIN/MAX
pattern. This fixes PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191130 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply r191108 with a fix for a memory corruption error I introduced. Of
course, we can't reference the scalars that we replace by vectorizing and then
call their eraseFromParent method. I only 'needed' the scalars to get the
DebugLoc. Just store the DebugLoc before actually vectorizing instead. As a nice
side effect, this also simplifies the interface between BoUpSLP and the
HorizontalReduction class to returning a value pointer (the vectorized tree
root).
radar://14607682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191123 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r191108.
The horizontal.ll test case fails under libgmalloc. Thanks Shuxin for pointing
this out to me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191121 91177308-0d34-0410-b5e6-96231b3b80d8
info finalization to greatly reduce the number of fixups that the
assembler has to handle in order to improve compile time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191119 91177308-0d34-0410-b5e6-96231b3b80d8
The problem of r191017 is that when GVN fabricate a val-number for a dead instruction (in order
to make following expr-PRE happy), it forget to fabricate a leader-table entry for it as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191118 91177308-0d34-0410-b5e6-96231b3b80d8
Clean up some simple code quality issues. Bring internal naming
conventions up to current standard, fix inconsistent formatting, and
tidy up a couple of odd contructs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191117 91177308-0d34-0410-b5e6-96231b3b80d8
Match reductions starting at binary operation feeding into a phi. The code
handles trees like
r += v1 + v2 + v3 ...
and
r += v1
r += v2
...
and
r *= v1 + v2 + ...
We currently only handle associative operations (add, fadd fast).
The code can now also handle reductions feeding into stores.
a[i] = v1 + v2 + v3 + ...
The code is currently disabled behind the flag "-slp-vectorize-hor". The cost
model for most architectures is not there yet.
I found one opportunity of a horizontal reduction feeding a phi in TSVC
(LoopRerolling-flt) and there are several opportunities where reductions feed
into stores.
radar://14607682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191108 91177308-0d34-0410-b5e6-96231b3b80d8
The GEP pattern is what SCEV expander emits for "ugly geps". The latter is what
you get for pointer subtraction in C code. The rest of instcombine already
knows how to deal with that so just canonicalize on that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191090 91177308-0d34-0410-b5e6-96231b3b80d8
The global registry is used to allow command line override of the
scheduler selection, but does not work well as the normal selection
API. For example, the same LLVM process should be able to target
multiple targets or subtargets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191071 91177308-0d34-0410-b5e6-96231b3b80d8
This was previously invoking UB by passing a user-defined type to
format. Thanks to Jordan Rose for pointing this out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191060 91177308-0d34-0410-b5e6-96231b3b80d8
Ensures that the pubnames entries actually refer to the intended
entities. This test could be more flexible if there was a way to do
multiline FileCheck matches with captures (in that way the test wouldn't
need to have hardcoded offset values and would thus be resilient to
changes in the layout of the DIEs in this CU).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191055 91177308-0d34-0410-b5e6-96231b3b80d8
This was an experimental scheduler a year ago. It's now used by
several subtargets, both in-order and out-of-order, and it
is about to be enabled by default for x86 and armv7. It will be the
new GenericScheduler for subtargets that don't provide their own
SchedulingStrategy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191051 91177308-0d34-0410-b5e6-96231b3b80d8
C-like languages promote types like unsigned short to unsigned int before
performing an arithmetic operation. Currently the rotate matcher in the
DAGCombiner does not consider this situation.
This commit extends the DAGCombiner in the way that the pattern
(or (shl ([az]ext x), (*ext y)), (srl ([az]ext x), (*ext (sub 32, y))))
is folded into
([az]ext (rotl x, y))
The matching is restricted to aext and zext because in this cases the upper
bits are either undefined or known. Test case is included.
This fixes PR16726.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191049 91177308-0d34-0410-b5e6-96231b3b80d8
C-like languages promote types like unsigned short to unsigned int before
performing an arithmetic operation. Currently the rotate matcher in the
DAGCombiner does not consider this situation.
This commit extends the DAGCombiner in the way that the pattern
(or (shl ([az]ext x), (*ext y)), (srl ([az]ext x), (*ext (sub 32, y))))
is folded into
([az]ext (rotl x, y))
The matching is restricted to aext and zext because in this cases the upper
bits are either undefined or known. Test case is included.
This fixes PR16726.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191045 91177308-0d34-0410-b5e6-96231b3b80d8
If "C1/X" were having multiple uses, the only benefit of this
transformation is to potentially shorten critical path. But it is at the
cost of instroducing additional div.
The additional div may or may not incur cost depending on how div is
implemented. If it is implemented using Newton–Raphson iteration, it dosen't
seem to incur any cost (FIXME). However, if the div blocks the entire
pipeline, that sounds to be pretty expensive. Let CodeGen to take care
this transformation.
This patch sees 6% on a benchmark.
rdar://15032743
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191037 91177308-0d34-0410-b5e6-96231b3b80d8
Based on code review feedback from Eric Christopher, unshifting these
constants as they can appear in the gdb_index itself, shifted a further
24 bits. This means that keeping them preshifted is a bit inflexible, so
let's not do that.
Given the motivation, wrap up some nicer enums, more type safety, and
some utility functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191035 91177308-0d34-0410-b5e6-96231b3b80d8
Names open to bikeshedding. Could switch back to the constants being
unshifted, but this way seems a bit easier to work with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191025 91177308-0d34-0410-b5e6-96231b3b80d8
This is how it ignores the dead code:
1) When a dead branch target, say block B, is identified, all the
blocks dominated by B is dead as well.
2) The PHIs of those blocks in dominance-frontier(B) is updated such
that the operands corresponding to dead predecessors are replaced
by "UndefVal".
Using lattice's jargon, the "UndefVal" is the "Top" in essence.
Phi node like this "phi(v1 bb1, undef xx)" will be optimized into
"v1" if v1 is constant, or v1 is an instruction which dominate this
PHI node.
3) When analyzing the availability of a load L, all dead mem-ops which
L depends on disguise as a load which evaluate exactly same value as L.
4) The dead mem-ops will be materialized as "UndefVal" during code motion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191017 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a flag to the MemorySanitizer pass that enables runtime rewriting of
indirect calls. This is part of MSanDR implementation and is needed to return
control to the DynamiRio-based helper tool on transition between instrumented
and non-instrumented modules. Disabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191006 91177308-0d34-0410-b5e6-96231b3b80d8
When selecting the DAG (add (WrapperRIP ...), (FrameIndex ...)), X86 code had
spotted the FrameIndex possibility and was working out whether it could fold
the WrapperRIP into this.
The test for forming a %rip version is notionally whether we already have a
base or index register (%rip precludes both), but we were forgetting to account
for the register that would be inserted later to access the frame.
rdar://problem/15024520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190995 91177308-0d34-0410-b5e6-96231b3b80d8
This puts all the global PassManager debugging flags, like
-print-after-all and -time-passes, behind a managed static. This
eliminates their static initializers and, more importantly, exit-time
destructors.
The only behavioral change I anticipate is that tools need to
initialize the PassManager before parsing the command line in order to
export these options, which makes sense. Tools that already initialize
the standard passes (opt/llc) don't need to do anything new.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190974 91177308-0d34-0410-b5e6-96231b3b80d8
1) make sure that the first two instructions of the sequence cannot
separate from each other. The linker requires that they be sequential.
If they get separated, it can still work but it will not work in all
cases because the first of the instructions mostly involves the hi part
of the pc relative offset and that part changes slowly. You would have
to be at the right boundary for this to matter.
2) make sure that this sequence begins on a longword boundary.
There appears to be a bug in binutils which makes some of these calculations
get messed up if the instruction sequence does not begin on a longword
boundary. This is being investigated with the appropriate binutils folks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190966 91177308-0d34-0410-b5e6-96231b3b80d8
Use the DIVariable::isIndirect() flag set by the frontend instead of
guessing whether to set the machine location's indirection bit.
Paired commit with CFE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190961 91177308-0d34-0410-b5e6-96231b3b80d8
advertised - but it does have the caveat that calls to DynamicLibrary::AddSymbol will
"reset" if you shutdown llvm and try to come back for seconds. This is a subtle
behavior change, but I'm assuming that nobody is affected by it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190946 91177308-0d34-0410-b5e6-96231b3b80d8
XCore target: Add XCoreTargetTransformInfo
This is where getNumberOfRegisters() resides, which in turn returns the
number of vector registers (=0).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190936 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason I never got around to adding these at the same time as
the signed versions. No idea why.
I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether
it should just be replaced with an "is normal" flag. I'll leave that
for later though.
There are some boundary conditions that can be tweaked, such as preferring
unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256",
but again I'll leave those for a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190930 91177308-0d34-0410-b5e6-96231b3b80d8
advertised - but it does have the caveat that calls to DynamicLibrary::AddSymbol will
"reset" if you shutdown llvm and try to come back for seconds. This is a subtle
behavior change, but I'm assuming that nobody is affected by it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190921 91177308-0d34-0410-b5e6-96231b3b80d8
If address space 0 was smaller than the address space
in a constant inttoptr/ptrtoint pair, the wrong mask size
would be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190899 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We indicate that the object files are safe by emitting a @feat.00
absolute address symbol. The address is presumably interpreted as a
bitfield of features that the compiler would like to enable. Bit 0 is
documented in the PE COFF spec to opt in to "registered SEH", which is
what /safeseh enables.
LLVM's object files are safe by default because LLVM doesn't know how to
produce SEH handlers.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1691
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190898 91177308-0d34-0410-b5e6-96231b3b80d8
To avoid regressions with bitfield optimizations, this slicing should take place
later, like ISel time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190891 91177308-0d34-0410-b5e6-96231b3b80d8
In particular, this means we emit non-external symbols defined to
variables, such as aliases or absolute addresses.
This is needed to implement /safeseh, and it appears there was some
confusion about what symbols to emit previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190888 91177308-0d34-0410-b5e6-96231b3b80d8
Some of this code is no longer necessary since int<->ptr casts are no
longer occur as of r187444.
This also fixes handling vectors of pointers, and adds a bunch of new
testcases for vectors and address spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190885 91177308-0d34-0410-b5e6-96231b3b80d8
Documenting a design choice to generate only medium model sequences for TLS
addresses at this time. Small and large code models could be supported if
necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190883 91177308-0d34-0410-b5e6-96231b3b80d8
Large code model on PPC64 requires creating and referencing TOC entries when
using the addis/ld form of addressing. This was not being done in all cases.
The changes in this patch to PPCAsmPrinter::EmitInstruction() fix this. Two
test cases are also modified to reflect this requirement.
Fast-isel was not creating correct code for loading floating-point constants
using large code model. This also requires the addis/ld form of addressing.
Previously we were using the addis/lfd shortcut which is only applicable to
medium code model. One test case is modified to reflect this requirement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190882 91177308-0d34-0410-b5e6-96231b3b80d8
Upcoming SLP vectorization improvements will want to be able to estimate costs
of horizontal reductions. Add infrastructure to support this.
We model reductions as a series of (shufflevector,add) tuples ultimately
followed by an extractelement. For example, for an add-reduction of <4 x float>
we could generate the following sequence:
(v0, v1, v2, v3)
\ \ / /
\ \ /
+ +
(v0+v2, v1+v3, undef, undef)
\ /
((v0+v2) + (v1+v3), undef, undef)
%rdx.shuf = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 2, i32 3, i32 undef, i32 undef>
%bin.rdx = fadd <4 x float> %rdx, %rdx.shuf
%rdx.shuf7 = shufflevector <4 x float> %bin.rdx, <4 x float> undef,
<4 x i32> <i32 1, i32 undef, i32 undef, i32 undef>
%bin.rdx8 = fadd <4 x float> %bin.rdx, %rdx.shuf7
%r = extractelement <4 x float> %bin.rdx8, i32 0
This commit adds a cost model interface "getReductionCost(Opcode, Ty, Pairwise)"
that will allow clients to ask for the cost of such a reduction (as backends
might generate more efficient code than the cost of the individual instructions
summed up). This interface is excercised by the CostModel analysis pass which
looks for reduction patterns like the one above - starting at extractelements -
and if it sees a matching sequence will call the cost model interface.
We will also support a second form of pairwise reduction that is well supported
on common architectures (haddps, vpadd, faddp).
(v0, v1, v2, v3)
\ / \ /
(v0+v1, v2+v3, undef, undef)
\ /
((v0+v1)+(v2+v3), undef, undef, undef)
%rdx.shuf.0.0 = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 0, i32 2 , i32 undef, i32 undef>
%rdx.shuf.0.1 = shufflevector <4 x float> %rdx, <4 x float> undef,
<4 x i32> <i32 1, i32 3, i32 undef, i32 undef>
%bin.rdx.0 = fadd <4 x float> %rdx.shuf.0.0, %rdx.shuf.0.1
%rdx.shuf.1.0 = shufflevector <4 x float> %bin.rdx.0, <4 x float> undef,
<4 x i32> <i32 0, i32 undef, i32 undef, i32 undef>
%rdx.shuf.1.1 = shufflevector <4 x float> %bin.rdx.0, <4 x float> undef,
<4 x i32> <i32 1, i32 undef, i32 undef, i32 undef>
%bin.rdx.1 = fadd <4 x float> %rdx.shuf.1.0, %rdx.shuf.1.1
%r = extractelement <4 x float> %bin.rdx.1, i32 0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190876 91177308-0d34-0410-b5e6-96231b3b80d8
We can't insert an insertelement after an invoke. We would have to split a
critical edge. So when we see a phi node that uses an invoke we just give up.
radar://14990770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190871 91177308-0d34-0410-b5e6-96231b3b80d8
other in memory.
The motivation was to get rid of truncate and shift right instructions that get
in the way of paired load or floating point load.
E.g.,
Consider the following example:
struct Complex {
float real;
float imm;
};
When accessing a complex, llvm was generating a 64-bits load and the imm field
was obtained by a trunc(lshr) sequence, resulting in poor code generation, at
least for x86.
The idea is to declare that two load instructions is the canonical form for
loading two arithmetic type, which are next to each other in memory.
Two scalar loads at a constant offset from each other are pretty
easy to detect for the sorts of passes that like to mess with loads.
<rdar://problem/14477220>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190870 91177308-0d34-0410-b5e6-96231b3b80d8
Add llvm.x86.* intrinsics for all of the Intel SHA Extensions instructions, as
well as tests. Also remove mayLoad and hasSideEffects, which can be inferred
from the instruction patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190864 91177308-0d34-0410-b5e6-96231b3b80d8
When a truncate node defines a legal vector type but uses an illegal
vector type, the legalization process was splitting the vector until
<1 x vector> type, but then it was failing to scalarize the node because
it did not know how to handle TRUNCATE.
<rdar://problem/14989896>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190830 91177308-0d34-0410-b5e6-96231b3b80d8
A DBG_VALUE is register-indirect iff the first operand is a register
_and_ the second operand is an immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190821 91177308-0d34-0410-b5e6-96231b3b80d8
If there are no legal integers, assume 1 byte.
This makes more sense than using the pointer size as
a guess for the maximum GPR width.
It is conceivable to want to use some 64-bit pointers
on a target where 64-bit integers aren't legal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190817 91177308-0d34-0410-b5e6-96231b3b80d8
Fast-isel generates a COPY_TO_REGCLASS for widening f32 to f64, which
is a nop on PPC64. This is needed to keep the register class system
happy, but on the fast-isel path it is not removed before emit as it
is for DAG select. Ignore this op when emitting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190795 91177308-0d34-0410-b5e6-96231b3b80d8
We would have to compute the pre increment value, either by computing it on
every loop iteration or by splitting the edge out of the loop and inserting a
computation for it there.
For now, just give up vectorizing such loops.
Fixes PR17179.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190790 91177308-0d34-0410-b5e6-96231b3b80d8
The port originally had special patterns for extload, mapping them to the
same instructions as sextload. It seemed neater to have patterns that
match "an extension that is allowed to be signed" and "an extension that
is allowed to be unsigned".
This was originally meant to be a clean-up, but it does improve the handling
of promoted integers a little, as shown by args-06.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190777 91177308-0d34-0410-b5e6-96231b3b80d8
This is a re-commit of r190764, with an extra check to make sure that we're not
performing the transformation on illegal types (a small test case has been
added for this as well).
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190771 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The '?' flag uses the last section group if the last had a section
group. We treat combining an explicit section group and the '?' as a
hard error.
This fixes PR17198.
Reviewers: rafael, bkramer
Reviewed By: bkramer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190768 91177308-0d34-0410-b5e6-96231b3b80d8
For alignment purposes, the instruction array will always have an even
number of entries, with the final entry potentially unused (in which
case the array will be one longer than indicated by the count of unwind
codes field).
Reviewed by Anton Korobeynikov, Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190767 91177308-0d34-0410-b5e6-96231b3b80d8
data structures.
The Win64 EH data structures must be of type IMAGE_REL_AMD64_ADDR32NB
instead of IMAGE_REL_AMD64_ADDR32. This is easiely achieved by adding
the VK_COFF_IMGREL32 modifier to the symbol reference.
Change also references to start and end of the SEH range of a function
as offsets to start of the function.
Reviewed by Jim Grosbach, Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190766 91177308-0d34-0410-b5e6-96231b3b80d8
This is causing test-suite failures.
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190765 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190764 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::isAlias can be called with SrcValue1 or SrcValue2 null, and we
can't use AA in this case (if we try, then the casting code in AA will assert).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190763 91177308-0d34-0410-b5e6-96231b3b80d8
This pass was based on the previous (essentially unused) profiling
infrastructure and the assumption that by ordering the basic blocks at
the IR level in a particular way, the correct layout would happen in the
end. This sometimes worked, and mostly didn't. It also was a really
naive implementation of the classical paper that dates from when branch
predictors were primarily directional and when loop structure wasn't
commonly available. It also didn't factor into the equation
non-fallthrough branches and other machine level details.
Anyways, for all of these reasons and more, I wrote
MachineBlockPlacement, which completely supercedes this pass. It both
uses modern profile information infrastructure, and actually works. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190748 91177308-0d34-0410-b5e6-96231b3b80d8
This was somewhat tricky because ~PrettyStackTraceEntry() may run after
llvm_shutdown() has been called. This is rare and only happens for a common idiom
used in the main() functions of command-line tools. This works around the idiom by
skipping the stack clean-up if the PrettyStackTraceHead ManagedStatic is not
constructed (i.e. llvm_shutdown() has been called).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190730 91177308-0d34-0410-b5e6-96231b3b80d8
Implements Instruction scheduler latencies for Silvermont,
using latencies from the Intel Silvermont Optimization Guide.
Auto detects SLM.
Turns on post RA scheduler when generating code for SLM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190717 91177308-0d34-0410-b5e6-96231b3b80d8
By definition copies across register banks are not coalescable. Still, it may be
possible to get rid of such a copy when the value is available in another
register of the same register file.
Consider the following example, where capital and lower letters denote different
register file:
b = copy A <-- cross-bank copy
...
C = copy b <-- cross-bank copy
This could have been optimized this way:
b = copy A <-- cross-bank copy
...
C = copy A <-- same-bank copy
Note: b and C's definitions may be in different basic blocks.
This patch adds a peephole optimization that looks through a chain of copies
leading to a cross-bank copy and reuses a source that is on the same register
file if available.
This solution could also be used to get rid of some copies (e.g., A could have
been used instead of C). However, we do not do so because:
- It may over constrain the coloring of the source register for coalescing.
- The register allocator may not be able to find a nice split point for the
longer live-range, leading to more spill.
<rdar://problem/14742333>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190713 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we modelled VPR128 and VPR64 as essentially identical
register-classes containing V0-V31 (which had Q0-Q31 as "sub_alias"
sub-registers). This model is starting to cause significant problems
for code generation, particularly writing EXTRACT/INSERT_SUBREG
patterns for converting between the two.
The change here switches to classifying VPR64 & VPR128 as
RegisterOperands, which are essentially aliases for RegisterClasses
with different parsing and printing behaviour. This fits almost
exactly with their real status (VPR128 == FPR128 printed strangely,
VPR64 == FPR64 printed strangely).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190665 91177308-0d34-0410-b5e6-96231b3b80d8
versions of gold. This support is designed to allow gold to produce
gdb_index sections similar to the accelerator tables and consumable
by gdb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190649 91177308-0d34-0410-b5e6-96231b3b80d8
When a structure is passed by value, and that structure contains a vector
member, according to the PPC ABI, the structure will receive enhanced alignment
(so that the vector within the structure will always be aligned).
This should resolve PR16641.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190636 91177308-0d34-0410-b5e6-96231b3b80d8
Reviewed by Joe Abbey and Tobias Grosser
Here is a patch that fixes decoding of CE_SELECT in BitcodeReader,
along with a simple test case. The problem in the current code is that
it generates but doesn't accept bitcode that uses vectors for the
first element of a select in this context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190634 91177308-0d34-0410-b5e6-96231b3b80d8
In fast-math mode sqrt(x) is calculated using the fast expansion of the
reciprocal of the reciprocal sqrt expansion. The reciprocal and reciprocal
sqrt expansions use the associated estimate instructions along with some Newton
iterations. Unfortunately, as a result, sqrt(0) was being calculated as NaN,
which is not correct. Now we explicitly return a result of zero if the input is
zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190624 91177308-0d34-0410-b5e6-96231b3b80d8
global ThreadLocals, thereby getting rid of the load-time initialization of those
objects and also getting rid of their destruction unless the LLVM client calls
llvm_shutdown.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190617 91177308-0d34-0410-b5e6-96231b3b80d8
Add basic assembly/disassembly support for the first Intel SHA
instruction 'sha1rnds4'. Also includes feature flag, and test cases.
Support for the remaining instructions will follow in a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190611 91177308-0d34-0410-b5e6-96231b3b80d8
Use the new instruction deprecation feature to mark mftb (now replaced with
mfspr) and dst (along with the other Altivec cache control instructions) as
deprecated when targeting cores supporting at least ISA v2.03.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190605 91177308-0d34-0410-b5e6-96231b3b80d8
undef constatnt for structure and test for these functions.
done by Yuri Veselov (mailto:Yuri.Veselov@intel.com)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190599 91177308-0d34-0410-b5e6-96231b3b80d8
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190598 91177308-0d34-0410-b5e6-96231b3b80d8
Aggressive anti-dependency breaking is enabled by default for all PPC cores.
This provides a general speedup on the P7 and other platforms (among other
factors, the instruction group formation for the non-embedded PPC cores is done
during post-RA scheduling). In order to do this safely, the incompatibility
between uses of the MFOCRF instruction and anti-dependency breaking are
resolved by marking MFOCRF with hasExtraSrcRegAllocReq. As noted in the removed
FIXME, the problem was that MFOCRF's output is sensitive to the identify of the
source register, and always paired with a shift to undo this effect. Because
anti-dependency breaking is unaware of this hidden dependency of the shift
amount on the source register of the MFOCRF instruction, changing that register
must be inhibited.
Two test cases were adjusted: The SjLj test was made more insensitive to
register choices and scheduling; the saveCR test disabled anti-dependency
breaking because part of what it is testing is proper register reuse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190587 91177308-0d34-0410-b5e6-96231b3b80d8
If no register classes are added to CriticalPathRCs, then the CriticalPathSet
bitmask will be empty. In that case, ExcludeRegs must remain NULL or else this
line will cause a segfault:
} else if ((ExcludeRegs != NULL) && ExcludeRegs->test(AntiDepReg)) {
I have no in-tree test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190584 91177308-0d34-0410-b5e6-96231b3b80d8
For _XYZ, the type of VDATA is v4i32, because v3i32 doesn't exist.
The ADDR64 bit is not exposed. A simpler intrinsic that doesn't take
a resource descriptor might be nicer.
The maximum number of input SGPRs is bumped to 17.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190575 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes some regressions in the piglit local memory store tests
introduced by recent commits which made the scheduler aware of the trans
slot.
It's not possible to test this using lit, because there is no way to
determine from the assembly dumps whether or not an instruction is in
the trans slot.
Even if this were possible, the test would be highly sensitive to
changes in the scheduler and might generate confusing false negatives.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190574 91177308-0d34-0410-b5e6-96231b3b80d8
As Andy pointed out to me a long time ago, there are no structural hazards in
the later pipeline stages of the A2, and so modeling them is useless. Also,
modeling the top pre-dispatch stages is deceiving because, when multiple
hardware threads are active, those resources are shared among the threads. The
bypass definitions were mostly wrong, and so those have been removed. The
resulting itinerary is much simpler, and more accurate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190562 91177308-0d34-0410-b5e6-96231b3b80d8
For embedded PPC cores (especially the A2 core), using the MI scheduler with AA
is far superior to the other scheduling options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190558 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC A2 core greatly benefits from aggressive concatenation unrolling;
use the new getUnrollingPreferences to enable this by default when targeting
the PPC A2 core.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190549 91177308-0d34-0410-b5e6-96231b3b80d8
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190542 91177308-0d34-0410-b5e6-96231b3b80d8
Definition of DIRef used to require the full definition of DIType because
of usage of DIType::isType in DIRef::resolve. We now use DIDescriptor::isType
instead to remove the requirement and move definition of DIRef before DIType.
With this, we can move the definition of DIType::getContext to the header
file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190540 91177308-0d34-0410-b5e6-96231b3b80d8
It works with clang, but GCC has different rules so we can't make all of those
hidden. This reverts commit r190534.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190536 91177308-0d34-0410-b5e6-96231b3b80d8
This reflects the common use case of nativizing a prepared path. The existing
version invokes undefined behavior if input = output, add an assert to catch
that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190510 91177308-0d34-0410-b5e6-96231b3b80d8
YAMLIO printed a string as is without quotes unless it contains a newline
character. That did not suffice. We also need to quote a string if it starts
with a backquote, quote, double quote or atsign, or it's the empty string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190469 91177308-0d34-0410-b5e6-96231b3b80d8
In some cases (e.g. when a build system pipes stderr) the Windows console
API cannot be used to color output. For these, provide a way to switch to
ANSI escape codes. This is required for Clang's -fansi-escape-codes option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190460 91177308-0d34-0410-b5e6-96231b3b80d8
On Windows, character encoding of multibyte environment variable varies
depending on settings. The only reliable way to handle it I think is to use
GetEnvironmentVariableW().
GetEnvironmentVariableW() works on wchar_t string, which is on Windows UTF16
string. That's not ideal because we use UTF-8 as the internal encoding in LLVM.
This patch defines a wrapper function which takes and returns UTF-8 string for
GetEnvironmentVariableW().
The wrapper function does not do any conversion and just forwards the argument
to getenv() on Unix.
Differential Revision: http://llvm-reviews.chandlerc.com/D1612
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190423 91177308-0d34-0410-b5e6-96231b3b80d8
We try to create the scope children DIEs after we create the scope DIE. But
to avoid emitting empty lexical block DIE, we first check whether a scope
DIE is going to be null, then create the scope children if it is not null.
From the number of children, we decide whether to actually create the scope DIE.
This patch also removes an early exit which checks for a special condition.
It also removes deletion of un-used children DIEs that are generated
because we used to generate children DIEs before the scope DIE.
Deletion of un-used children DIEs may cause problem because we sometimes keep
created DIEs in a member variable of a CU.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190421 91177308-0d34-0410-b5e6-96231b3b80d8
Specialize the constructors for DIRef<DIScope> and DIRef<DIType> to make sure
the Value is indeed a scope ref and a type ref.
Use DIScopeRef for DIScope::getContext and DIType::getContext and use DITypeRef
for getContainingType and getClassType.
DIScope::generateRef now returns a DIScopeRef instead of a "Value *" for
readability and type safety.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190418 91177308-0d34-0410-b5e6-96231b3b80d8
We were figuring out whether to use tPICADD or PICADD, then just using
tPICADD unconditionally anyway. Oops.
A testcase from someone familiar enough with ELF to produce one would
be appreciated. The existing PIC testcase correctly verifies the .s
generated, but that doesn't catch this bug, which only showed up in
direct-to-object mode.
http://llvm.org/bugs/show_bug.cgi?id=17180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190417 91177308-0d34-0410-b5e6-96231b3b80d8
The main complication here is that TM and TMY (the memory forms) set
CC differently from the register forms. When the tested bits contain
some 0s and some 1s, the register forms set CC to 1 or 2 based on the
value the uppermost bit. The memory forms instead set CC to 1
regardless of the uppermost bit.
Until now, I've tried to make it so that a branch never tests for an
impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the
result will only test for 0 or 1. Originally I'd tried to do the same
thing for TM and TMY by using custom matching code in ISelDAGToDAG.
That ended up being very ugly though, and would have meant duplicating
some of the chain checks that the common isel code does.
I've therefore gone for the simpler alternative of adding an extra
operand to the TM DAG opcode to say whether a memory form would be OK.
This means that the inverse of a "TM;JE" is "TM;JNE" rather than the
more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE".
I suppose that's arguably less confusing though...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190400 91177308-0d34-0410-b5e6-96231b3b80d8
The vselect mask isn't a setcc.
This breaks in the case when the result of getSetCCResultType
is larger than the vector operands
e.g. %tmp = select i1 %cmp <2 x i8> %a, <2 x i8> %b
when getSetCCResultType returns <2 x i32>, the assertion
that the (MaskTy.getSizeInBits() == Op1.getValueType().getSizeInBits())
is hit.
No test since I don't think I can hit this with any of the current
targets. The R600/SI implementation would break, since it returns a
vector of i1 for this, but it doesn't reach ExpandSELECT for other
reasons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190376 91177308-0d34-0410-b5e6-96231b3b80d8
TAG_friend are updated to use scope reference.
Added testing cases to verify that class with inheritance can be uniqued.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190364 91177308-0d34-0410-b5e6-96231b3b80d8
This partially reverts r190330. DIScope::getContext now returns DIScopeRef
instead of DIScope. We construct a DIScopeRef from DIScope when we are
dealing with subprogram, lexical block or name space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190362 91177308-0d34-0410-b5e6-96231b3b80d8
Arnold's idea.
I generally try to avoid stateful heuristics because it can make
debugging harder. However, we need a way to prevent the latency
priority from dominating, and it somewhat makes sense to schedule
aggressively for latency only within an issue group.
Swift in particular likes this, and it doesn't hurt anyone else:
| Benchmarks/MiBench/consumer-lame | 10.39% |
| Benchmarks/Misc/himenobmtxpa | 9.63% |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190360 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM IR doesn't currently allow atomic bool load/store operations, and the
transformation is dubious anyway because it isn't profitable on all platforms.
PR17163.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190357 91177308-0d34-0410-b5e6-96231b3b80d8
Several architectures use the same instruction to perform both a comparison and
a subtract. The instruction selection framework does not allow to consider
different basic blocks to expose such fusion opportunities.
Therefore, these instructions are “merged” by CSE at MI IR level.
To increase the likelihood of CSE to apply in such situation, we reorder the
operands of the comparison, when they have the same complexity, so that they
matches the order of the most frequent subtract.
E.g.,
icmp A, B
...
sub B, A
<rdar://problem/14514580>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190352 91177308-0d34-0410-b5e6-96231b3b80d8
There are more than one paths to where the frame information is emitted. Place
the call to generateCompactUnwindEncodings() into the method which outputs the
frame information, thus ensuring that the encoding is there for every path. This
involved threading the MCAsmBackend object through to this method.
<rdar://problem/13623355>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190335 91177308-0d34-0410-b5e6-96231b3b80d8
In DIBuilder, the context field of a TAG_member is updated to use the
scope reference. Verifier is updated accordingly.
DebugInfoFinder now needs to generate a type identifier map to have
access to the actual scope. Same applies for BreakpointPrinter.
processModule of DebugInfoFinder is called during initialization phase
of the verifier to make sure the type identifier map is constructed early
enough.
We are now able to unique a simple class as demonstrated by the added
testing case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190334 91177308-0d34-0410-b5e6-96231b3b80d8
DIScope::getContext is a wrapper function that calls the specific getContext
method on each subclass. When we switch DIType::getContext to return DIScopeRef
instead of DIScope, DIScope::getContext can no longer return a DIScope without
a type identifier map.
DIScope::getContext is only used by DwarfDebug, so we move it to DwarfDebug
to have easy access to the type identifier map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190330 91177308-0d34-0410-b5e6-96231b3b80d8
The work on this project was left in an unfinished and inconsistent state.
Hopefully someone will eventually get a chance to implement this feature, but
in the meantime, it is better to put things back the way the were. I have
left support in the bitcode reader to handle the case-range bitcode format,
so that we do not lose bitcode compatibility with the llvm 3.3 release.
This reverts the following commits: 155464, 156374, 156377, 156613, 156704,
156757, 156804 156808, 156985, 157046, 157112, 157183, 157315, 157384, 157575,
157576, 157586, 157612, 157810, 157814, 157815, 157880, 157881, 157882, 157884,
157887, 157901, 158979, 157987, 157989, 158986, 158997, 159076, 159101, 159100,
159200, 159201, 159207, 159527, 159532, 159540, 159583, 159618, 159658, 159659,
159660, 159661, 159703, 159704, 160076, 167356, 172025, 186736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190328 91177308-0d34-0410-b5e6-96231b3b80d8
This helper function needs the type identifier map when we switch
DIType::getContext to return DIScopeRef instead of DIScope.
Since isSubprogramContext is used by DwarfDebug only, We move it to DwarfDebug
to have easy access to the map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190325 91177308-0d34-0410-b5e6-96231b3b80d8
A reference to a scope is more general than a reference to a type since
DIType is a subclass of DIScope.
A reference to a type can be either an identifier for the type or
the DIType itself, while a reference to a scope can be either an
identifier for the type (when the scope is indeed a type) or the
DIScope itself. A reference to a type and a reference to a scope
will be resolved in the same way. The only difference is in the
verifier when a field is a reference to a type (i.e. the containing
type field of a DICompositeType) or a field is a reference to a scope
(i.e. the context field of a DIType).
This is to get ready for switching DIType::getContext to return
DIScopeRef instead of DIScope.
Tighten up isTypeRef and isScopeRef to make sure the identifier is not
empty and the MDNode is DIType for TypeRef and DIScope for ScopeRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190322 91177308-0d34-0410-b5e6-96231b3b80d8
stores, make sure the load or store that accesses the higher half does not have
an alignment that is larger than the offset from the original address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190318 91177308-0d34-0410-b5e6-96231b3b80d8