Thomas Harte
2d8e260671
Take a shot at the phase mismatch IRQ.
2022-09-15 16:24:06 -04:00
Thomas Harte
04f5d29ed9
Improve logging, factor out phase_matches per TODO comment.
2022-09-15 16:14:14 -04:00
Thomas Harte
df29a50738
Attempt to support the DMA interface.
2022-08-31 15:33:48 -04:00
Thomas Harte
ea4bf5f31a
Provide card's SCSI ID.
2022-08-23 15:05:36 -04:00
Thomas Harte
8f2e94a1d8
Switch name back to emphasise _async_.
2022-07-16 14:41:04 -04:00
Thomas Harte
bf03bda314
Generalise AsyncTaskQueue, DeferringAsyncTaskQueue and AsyncUpdater into a single template.
2022-07-14 16:39:26 -04:00
Thomas Harte
55af6681af
Avoid unnecessary get_port_input
calls.
2021-11-24 17:15:48 -05:00
Thomas Harte
2a7a42ff8f
Add header for assert
.
2021-11-24 16:28:18 -05:00
Thomas Harte
0ad1529f3f
Retain delegate bit length for non-self-clocked data.
2021-11-24 16:15:27 -05:00
Thomas Harte
0df8173536
Merge branch 'master' into Amiga
2021-11-24 08:58:03 -05:00
Thomas Harte
f5d3d6bcea
Splits the lowpass filter into push and pull variants.
2021-11-21 15:37:29 -05:00
Thomas Harte
4fc25fb798
Adds basic shift input.
2021-11-07 05:18:54 -08:00
Thomas Harte
941d9a46a2
Makes a better effort at exposition; better implements clocked line.
2021-11-07 05:18:40 -08:00
Thomas Harte
ecfe68d70f
Introduce the principle that a Serial::Line can be two-wire — clock + data.
2021-11-06 16:54:20 -07:00
Thomas Harte
f102d8a4b4
Extend to allow full-[byte/word/dword] writes, in LSB or MSB order.
2021-11-06 12:01:32 -07:00
Thomas Harte
6d34432988
Starts to build in a serial line for input.
2021-11-04 18:54:28 -07:00
Thomas Harte
b827b9e33e
Add necessary shift storage.
2021-11-03 19:26:45 -07:00
Thomas Harte
29e5ecc282
Add TODOs rather than complete stop on shift register acccesses.
2021-11-02 18:19:31 -07:00
Thomas Harte
9ecd43238f
Correct 8520 TOD setting and getting.
2021-10-30 12:02:43 -07:00
Thomas Harte
5ffe71346c
Eliminate interrupt magic constants.
2021-10-29 19:04:06 -07:00
Thomas Harte
d9d20d9d30
Walk back slightly.
2021-10-14 18:02:58 -07:00
Thomas Harte
689bfbbdb3
Be overt in initialiser list.
2021-10-14 16:57:26 -07:00
Thomas Harte
eb157f15f3
Adds index hole interrupt.
2021-10-09 04:08:59 -07:00
Thomas Harte
73e45511dc
Add missing #include.
2021-10-04 05:26:38 -07:00
Thomas Harte
e47eab1d40
Merge branch 'master' into Amiga
2021-09-14 20:27:59 -04:00
Thomas Harte
dfcd1508c9
Establishes valid initial BRAM.
2021-09-10 19:56:20 -04:00
Thomas Harte
0ca4631279
Switch to zero-initialised state; be more careful about resetting data.
2021-09-09 23:08:13 -04:00
Thomas Harte
a6221ca322
Reload data only if an output is found.
2021-09-09 22:07:03 -04:00
Thomas Harte
f8380d2d4c
Add 8250 feature of 'count, regardless'.
2021-08-08 22:32:41 -04:00
Thomas Harte
1f9e41e9cb
Ensure TOD isn't firing from power-on.
2021-08-08 18:51:58 -04:00
Thomas Harte
98bd6fc240
Adds a further logging hint.
2021-08-06 23:16:06 -04:00
Thomas Harte
b9f78f5d33
Fix final timer B test.
2021-08-03 22:27:23 -04:00
Thomas Harte
b4ec9d70da
Adds the CNT input.
2021-08-03 22:19:41 -04:00
Thomas Harte
dd91d793d9
Correct typo.
2021-08-03 21:45:44 -04:00
Thomas Harte
8e51e8eb77
Does just a touch of 6526 TOD work.
2021-08-03 21:13:08 -04:00
Thomas Harte
6210605bc7
Transfers full TOD responsibility onto the chip-specific templates.
2021-08-03 19:10:09 -04:00
Thomas Harte
0245b040b0
Splits TOD storage by model.
...
TOD storage will probably end up being a full-on class.
2021-08-03 18:50:58 -04:00
Thomas Harte
8795719c18
This counts reloads, most accurately.
2021-08-03 17:12:08 -04:00
Thomas Harte
6bbbf43341
At least attempts to chain correctly.
2021-08-03 17:03:58 -04:00
Thomas Harte
ee6039bfa5
Writes to a timer _during reload_ now have effect.
...
Net: one CIA test passed.
2021-08-03 16:57:05 -04:00
Thomas Harte
ef58ce6277
Gets a bit more rigorous about the clocking stage.
...
Albeit without advancing relative to the test.
2021-08-02 21:04:00 -04:00
Thomas Harte
15de5e98c4
Adds [partial] test for whether counters are linked.
2021-08-02 20:17:37 -04:00
Thomas Harte
38848ca2db
Rationalises reload logic and cuts storage.
...
Failure point is now chaining, I think.
2021-08-02 20:14:01 -04:00
Thomas Harte
77c627e822
Ensure that reading the interrupt flags really clears the master bit.
...
Also makes some guesses on one-shot and reload timing. Alas the test isn't in itself specific enough to be more systematic here.
2021-08-02 07:47:08 -04:00
Thomas Harte
c640132699
Reinstates clocking.
2021-08-01 21:35:08 -04:00
Thomas Harte
57dd38aef2
Reintroduces reload-on-off, adds interrupt delay.
2021-08-01 21:09:02 -04:00
Thomas Harte
460a6cb6fe
Attempts a more literal implementation.
2021-08-01 18:14:10 -04:00
Thomas Harte
3d160ce85f
Add another potential warning.
2021-07-30 18:21:38 -04:00
Thomas Harte
759007ffc1
Attempts to route CIA interrupts.
2021-07-28 19:36:30 -04:00
Thomas Harte
37a55c3a77
Corrects 6526 interrupt control write.
...
This seems to imply that the 6526 should be interrupting too.
2021-07-28 19:26:02 -04:00
Thomas Harte
bcb7bb5cce
Improves logging further.
...
To investigate the new perpetual loop.
2021-07-26 17:02:30 -04:00
Thomas Harte
34d4420e8c
Correct reading of top byte of counter 2.
2021-07-25 20:41:15 -04:00
Thomas Harte
fcd6b7b0ea
Takes further aim at the conters.
...
I think test cases are needed, probably.
2021-07-24 16:06:49 -04:00
Thomas Harte
ceca32ceb3
Takes a guess at one-shot mode.
2021-07-24 15:53:18 -04:00
Thomas Harte
77a8ddb95c
Edges towards working counters.
2021-07-23 22:43:47 -04:00
Thomas Harte
c733a4dbf8
Beefs up interrupt awareness.
2021-07-23 21:58:52 -04:00
Thomas Harte
d898a43dff
Implements time-of-day counters, provisionally.
...
Interrupts to do.
2021-07-23 21:24:07 -04:00
Thomas Harte
6123349b79
Stubs in control registers and disables exit-on-miss.
...
I think I may be running up against the limits of stubbing now. Probably time to implement some stuff.
2021-07-22 19:28:01 -04:00
Thomas Harte
56b62a5e49
Adds a dummy interrupt control register.
2021-07-22 16:09:32 -04:00
Thomas Harte
a030d9935e
Adds port input.
2021-07-18 20:25:04 -04:00
Thomas Harte
c425dec4d5
Makes some attempt to get as far as the overlay being disabled.
2021-07-18 17:17:41 -04:00
Thomas Harte
67d53601d5
Latch and return data direction.
...
Albeit with no port-handling effect yet.
2021-07-18 12:23:47 -04:00
Thomas Harte
622cca0acf
Adds sufficient address decoding to print a more helpful exit message.
2021-07-18 12:13:56 -04:00
Thomas Harte
48999c03a5
Adds concept of time, captured port handler.
2021-07-18 11:49:10 -04:00
Thomas Harte
377cc7bdcd
Start to introduce a 6526/8250.
2021-07-18 11:36:13 -04:00
Thomas Harte
a5d0976c2d
Eliminate unused #includes.
2021-07-18 11:35:57 -04:00
Thomas Harte
ae05010255
Improve indentation.
2021-07-18 11:29:26 -04:00
Thomas Harte
66cacbd0e0
Be overt about the type being supplied.
2021-07-18 11:28:18 -04:00
Thomas Harte
c8699d9770
Correct Disk II sleeping test to allow for spin-down.
2021-07-16 17:12:57 -04:00
Thomas Harte
69c0734975
WD1770: switch motor on even if spin-up is disabled.
2021-06-21 23:26:55 -04:00
Thomas Harte
1d5144b912
Correct no-interrupt signal.
2021-06-04 22:38:07 -04:00
Thomas Harte
b7a62e0121
Adds SZX support.
...
Tweaking exposed Spectrum state object as relevant.
2021-04-26 20:47:28 -04:00
Thomas Harte
3348167c46
Ensures AY registers are conveyed.
2021-04-26 17:39:11 -04:00
Thomas Harte
73c8157197
Retain 6850 time tracking at all times.
2021-04-20 22:26:43 -04:00
Thomas Harte
af1dc2d3b2
Switches to correct non-value sentinel.
2021-04-20 21:56:58 -04:00
Thomas Harte
1266bbb224
Makes the TMS a sequence-point-generating JustInTimeActor.
2021-04-05 21:02:37 -04:00
Thomas Harte
8a11a5832c
Uses GI::AY38910::Utility
far and wide.
2021-03-26 23:19:47 -04:00
Thomas Harte
f37f89a7d3
Merge branch 'master' into ZXSpectrum
2021-03-21 22:44:37 -04:00
Thomas Harte
58be770eaa
Factors out some boilerplate.
...
When I'm confident this is correct, I can fix up the other call sites.
2021-03-21 00:14:48 -04:00
Thomas Harte
650b9a139b
Tweak Master System blue scale.
2021-03-19 08:38:21 -04:00
Thomas Harte
6839e9e3b3
Ensures no double definition of NDEBUG.
2021-03-07 12:52:54 -05:00
Thomas Harte
86fd47545d
Silences.
2021-03-03 20:51:33 -05:00
Thomas Harte
71a107fe75
Silences the IWM again, for now.
2021-02-23 21:57:19 -05:00
Thomas Harte
a3e98907ca
Removes temporary printf.
2021-02-14 21:03:54 -05:00
Thomas Harte
ee5f45c979
Merge branch 'master' into AppleIIgs
2020-12-29 22:16:23 -05:00
Thomas Harte
dfe4e49110
Ensure proper in-memory ordering of the b72a2c70 ROM.
2020-12-29 22:08:48 -05:00
Thomas Harte
8ace258fbc
Tackles outstanding GCC warnings.
2020-11-22 21:43:56 -05:00
Thomas Harte
9b45c5a1cd
Resolves out-of-bounds reads.
2020-11-21 22:36:10 -05:00
Thomas Harte
4a42de4f18
Attempts to add 5.25" drive support to the IIgs.
...
I want to try some classic software.
2020-11-20 21:37:17 -05:00
Thomas Harte
98347cb1c3
Starts in the direction of audio support.
2020-11-18 18:39:11 -05:00
Thomas Harte
cddd72876f
Flips meaning of ejected bit, to please the IIgs.
2020-11-18 17:20:48 -05:00
Thomas Harte
37815a982a
Much logging later, corrects 7Mhz IWM windows.
...
Confirmed by mathematics — the new ones are seven-eighths the length of the established 8Mhz windows — and with reference to suitable Apple documentation.
2020-11-13 22:05:45 -05:00
Thomas Harte
b0fc2f6ecf
Amps up logging.
...
Current suspicion is that the IIgs isn't getting a clean byte stream, never mind whether my assumption of exactly-Mac-style GCR holds (which it probably doesn't).
2020-11-12 21:54:54 -05:00
Thomas Harte
81969bbea9
Improves logging, at least for now.
2020-11-12 21:17:14 -05:00
Thomas Harte
1f5908dc51
Corrects logging output.
2020-11-11 20:26:04 -05:00
Thomas Harte
72884c3ead
Does a better job of shifting output; takes a new guess at the no-receiver case.
...
ROM03 at least now reaches "check startup device!"
2020-11-11 20:19:35 -05:00
Thomas Harte
80358cf5bd
Shift output even if nobody is listening.
2020-11-11 20:04:48 -05:00
Thomas Harte
6d511f01a4
Ensures intended no-drive behaviour; no more risks with dangling pointers or nullptr.
2020-11-11 17:54:21 -05:00
Thomas Harte
6d3d7c6006
It seems like this fix is no longer needed.
2020-11-11 17:30:22 -05:00
Thomas Harte
03d1aff6c0
Fixes 8-bit read/write.
2020-10-30 22:17:55 -04:00
Thomas Harte
034056d0cd
Adds full 8-bit clock addressing; stubs clock into the IIgs.
2020-10-29 21:38:36 -04:00
Thomas Harte
1249fb598b
Factors Apple's RTC out of the Macintosh.
2020-10-29 21:03:02 -04:00
Thomas Harte
9447aa38be
Removes debugging printf
.
2020-09-22 22:13:54 -04:00
Thomas Harte
022ec20e75
Tries to add semantic meaning to the various auxiliary control fields.
...
To consider: decoding at set?
2020-09-22 20:50:39 -04:00
Thomas Harte
41f69405d8
Don't decrement timer 1 from the system clock when in PB6 mode.
...
TODO: rest of PB6 mode.
2020-09-21 22:39:49 -04:00
Thomas Harte
8e242eea54
Ensures timer-linked PB7 output is actually output.
2020-09-20 15:03:26 -04:00
Thomas Harte
703065a0a5
Takes a run at timer-linked PB7 output behaviour.
...
Seemingly sufficiently to pass the VICE test (which I've transcribed), though with some guesswork.
2020-09-20 14:51:59 -04:00
Thomas Harte
e807a462a1
My new reading is that only a write to the counter should affect the interrupt flag.
2020-09-17 21:31:29 -04:00
Thomas Harte
18790a90ae
Ensures timer 2 doesn't use timed behaviour when in pulse mode.
2020-09-17 21:09:32 -04:00
Thomas Harte
21afc70261
Adds formal data-sheet names.
2020-09-17 19:00:46 -04:00
Thomas Harte
a17d0e428f
Protects against some further uninitialised values.
2020-09-16 18:15:57 -04:00
Thomas Harte
bb57f0bcc7
Ensures all 6560 properties have a valid default value.
2020-09-16 17:24:18 -04:00
Thomas Harte
fa95a17af5
Resolves receive_bit_count-unused warnings.
2020-07-24 21:59:27 -04:00
Thomas Harte
8aeebdbc99
Remove redundant comment.
2020-07-16 23:26:45 -04:00
Thomas Harte
1288369865
Merge branch 'master' into FurtherSCC
2020-07-11 23:54:40 -04:00
Thomas Harte
2477752fa4
Adds further [[fallthrough]]
attributes.
2020-06-19 23:36:51 -04:00
Thomas Harte
3cb1072c29
Adds an explicit [[fallthrough]] tag.
2020-06-19 23:10:25 -04:00
Thomas Harte
d64b4fbc26
Adds a Qt timer class. Precision seems to be 'acceptable'.
2020-05-31 23:39:08 -04:00
Thomas Harte
73131735fa
Further qmake warning corrections.
2020-05-30 19:31:17 -04:00
Thomas Harte
48afc54af6
Cuts down unused parameter warnings to just a few that may well indicate implementation errors.
2020-05-30 01:06:43 -04:00
Thomas Harte
267006782f
Starts to add Qt target; resolves many build warnings.
2020-05-30 00:37:06 -04:00
Thomas Harte
512a52e88d
Increases const correctness, marks some additional constructors as constexpr, switches std::atomic construction style.
2020-05-20 23:34:26 -04:00
Thomas Harte
66c2eb0414
Further tightens const
and constexpr
usage.
2020-05-12 22:22:21 -04:00
Thomas Harte
9458963311
Factors out shift by 7.
2020-05-10 13:57:50 -04:00
Thomas Harte
44690b1066
Halves effect of vibrato.
2020-05-10 12:05:14 -04:00
Thomas Harte
64c62c16fb
Adjusts tremolo scale.
2020-05-10 00:43:46 -04:00
Thomas Harte
afef4f05fe
Adds damping and phase resets for the rhythm section.
2020-05-10 00:10:51 -04:00
Thomas Harte
25996ce180
Further doubles down on construction syntax for type conversions.
2020-05-09 23:00:39 -04:00
Thomas Harte
31c6faf3c8
Adds a bunch of const
s.
2020-05-09 21:23:52 -04:00
Thomas Harte
40b60fe5d4
Renames folder as per intended scope.
2020-05-09 18:04:11 -04:00
Thomas Harte
eed357abb4
Introduces concept of 'average peak volume' in order better to normalise audio sources like the OPLL.
2020-05-09 17:57:21 -04:00
Thomas Harte
8f541602c1
Moves modulator updates a sample behind operator updates.
2020-05-08 21:14:25 -04:00
Thomas Harte
668f4b77f3
Implements feedback.
2020-05-08 21:05:23 -04:00
Thomas Harte
303965fbb8
Removes the crutch of my first-attempt implementation.
2020-05-08 20:53:34 -04:00
Thomas Harte
792aed242d
Fixes the use-sustain flag.
2020-05-08 20:49:39 -04:00
Thomas Harte
dc5654b941
Attempts to implement the proper attack phase.
...
It's sounding pretty good now, but for sustain.
2020-05-08 18:59:05 -04:00
Thomas Harte
e51e2425cc
Attempts to implement decay and release the right way around and with full precision.
...
Higher numbers = decay/release more quickly, not more slowly.
2020-05-08 18:40:49 -04:00
Thomas Harte
95c6b9b55d
Declare proper envelope precision.
2020-05-08 17:58:50 -04:00
Thomas Harte
ea25ead19d
Ensures rhythm envelope generators don't pick up should_damp state.
2020-05-08 00:18:31 -04:00
Thomas Harte
24100ec3b0
Switches snare and high-hat envelope generators.
2020-05-08 00:08:14 -04:00
Thomas Harte
32437fbf8b
Attempts to use the proper rhythm mode envelope generators.
2020-05-07 23:56:15 -04:00
Thomas Harte
5219a86a41
In principle fully implements rhythm mode.
2020-05-07 23:38:51 -04:00
Thomas Harte
e12dc5d894
Reduce the amount of time spent installing instruments.
2020-05-06 00:15:28 -04:00
Thomas Harte
75315406bb
Ensure all channels begin in 'release' phase, which is currently code for 'off' in conjunction with attenuation of 511.
2020-05-06 00:13:01 -04:00
Thomas Harte
ea42fe638a
Corrects channel attenuation and carrier sustain level settings.
2020-05-05 23:41:15 -04:00
Thomas Harte
744211cec0
Ensures rhythm instruments are installed.
2020-05-05 23:13:13 -04:00
Thomas Harte
1a4321d7d0
Attempts better to balance attenuations.
2020-05-05 22:14:11 -04:00
Thomas Harte
b943441901
Marks up more specific TODOs.
...
I think I'm already much happier with this factoring.
2020-05-05 00:35:03 -04:00
Thomas Harte
0505b82384
Restores top bit of channel period, propagates it to the envelope generator.
2020-05-05 00:28:24 -04:00
Thomas Harte
c9fb5721cd
Makes first attempt to reintroduce full-melodic output.
2020-05-05 00:16:45 -04:00
Thomas Harte
386a7ca442
Continues doing away with the attempt heavily to interleave the OPLL and OPL2, creating a new OPLL class.
2020-05-04 21:14:51 -04:00
Thomas Harte
e929d5d819
Ensures proper dereferencing of the std::optional.
2020-05-03 21:57:15 -04:00
Thomas Harte
94614ae4c3
Shifts the LFO implementation inline.
2020-05-03 21:44:22 -04:00
Thomas Harte
1223c99e0f
Adds waveform generation logic to the new factoring.
2020-05-03 21:38:20 -04:00
Thomas Harte
1ff5ea0a6e
Adds KeyLevelScaler, implements EnvelopeGenerator, adds reset
to PhaseGenerator.
2020-05-03 16:24:55 -04:00
Thomas Harte
9d2691d1d2
Taking it as given that outstanding deficiencies are mostly due to poor design, starts breaking out the envelope and phase generators.
2020-05-01 23:46:42 -04:00
Thomas Harte
e4ef2c68bb
Feeds through drum volume levels.
2020-04-30 19:35:09 -04:00
Thomas Harte
7fffafdfd4
Wires the high-hat through, possibly incorrectly.
2020-04-29 22:44:15 -04:00
Thomas Harte
c4135fad2b
Attempts completely to decouple updates and audio outputs.
2020-04-29 22:07:40 -04:00
Thomas Harte
9f0c8bcae7
Attempts to add the missing noise generators. I think I may still be astray on volumes.
2020-04-26 15:51:33 -04:00
Thomas Harte
2bc36a6cde
Eliminates branch within snare output.
2020-04-26 00:21:15 -04:00
Thomas Harte
ee10fe3d2c
Fully separates updates and outputs in operators; takes a shot at the snare.
2020-04-26 00:18:09 -04:00
Thomas Harte
a424e867f9
Continues factoring this apart, albeit with a decision on whether to retain update-and-output still pending.
2020-04-25 23:07:40 -04:00
Thomas Harte
f52b40396a
Re-ups output level.
...
Though it's still quiet compared to the SN.
2020-04-25 23:07:06 -04:00
Thomas Harte
cd2ab70a58
Moves the LFSR to the LowFrequencyOscillator.
...
Possibly I should come up with a better name for that?
2020-04-25 22:21:42 -04:00
Thomas Harte
65a3783dd2
Attempts the tom tom.
2020-04-25 19:21:55 -04:00
Thomas Harte
b9b5c2a3bc
Takes a first run at proper slot mixing and the bass drum.
2020-04-25 18:01:05 -04:00
Thomas Harte
12c618642e
Corrects output range.
2020-04-25 00:07:58 -04:00
Thomas Harte
6ebc93c995
Switches to maximum-rate multiplexing. Hopefully to eliminate the mixer as a consideration for now.
2020-04-24 23:50:06 -04:00
Thomas Harte
6d4e29c851
Strips mixer back to basics in search of audio issues.
2020-04-24 23:32:02 -04:00
Thomas Harte
b3979e2fda
Looking towards rhythm mode, and in search of bugs: factors out ADSR.
...
Further factorings to come.
2020-04-24 18:48:32 -04:00
Thomas Harte
983c32bf75
Adds vibrato.
...
This would complete melodic output, subject to bug fixes.
2020-04-24 18:02:41 -04:00
Thomas Harte
9e3614066a
Adds tremolo support, switches to global timer for ADSR stages other than attack.
2020-04-23 23:55:49 -04:00
Thomas Harte
c7ad6b1b50
Minor layout and commenting improvements.
2020-04-21 23:35:48 -04:00
Thomas Harte
676dcf7fbb
Calculates the proper key scale rate, though ADSR itself is still lacking that precision.
2020-04-21 22:57:56 -04:00
Thomas Harte
50d725330c
Adds missing header.
2020-04-21 22:48:52 -04:00
Thomas Harte
2886dd1dae
Collapses key-level scaling to a single 2d table.
...
I dare imagine I can do better; the columns in particular look like arithmetic progressions.
2020-04-21 20:19:02 -04:00
Thomas Harte
40424ac38b
Re-enables key-level scaling, with 3db and 1.5db the correct way around.
2020-04-21 20:10:40 -04:00
Thomas Harte
a4d3865394
Decreases sustain level attenuation; disables key-level scaling for now.
...
The latter was definitely wrong, I also think I don't need the big four tables.
2020-04-21 19:58:40 -04:00
Thomas Harte
bdce1c464a
Takes a shot at key-level scaling. Testing to come.
2020-04-21 00:09:42 -04:00
Thomas Harte
475d75c16a
Preserves fractional part of modulator phase.
2020-04-20 23:35:37 -04:00
Thomas Harte
32fd1897d0
Via a unit test, confirms and fixes relative volumes of OPLL channels.
...
Also rejigs responsibility for scaling to emulator-standard volume.
2020-04-20 23:17:29 -04:00
Thomas Harte
f19fd7c166
Pulls out common melodic update calls.
2020-04-20 18:58:31 -04:00
Thomas Harte
100fddcee1
Corrects divider, takes another whack at ADSR.
2020-04-20 18:58:10 -04:00
Thomas Harte
99fa86a67e
Adds a test for lookup sine. And fixes lookup sine.
2020-04-20 18:40:47 -04:00
Thomas Harte
6568c29c54
Improves commentary.
2020-04-19 22:42:25 -04:00
Thomas Harte
c54bbc5a04
Rename Table.h; LogSin -> LogSign and make it a bit more typer.
2020-04-19 13:33:17 -04:00
Thomas Harte
92d0c466c2
Moves complete phase -> output calculation inside Operator.
...
Reasoning being: otherwise I wasn't currently enforcing non-sine waveforms.
2020-04-19 13:27:24 -04:00
Thomas Harte
020c760976
Simplifies the phase counter.
2020-04-19 00:30:14 -04:00
Thomas Harte
cdfd7de221
Minor: enables all melodic channels when rhythm mode is disabled; supports non-modulated channels.
2020-04-18 17:48:29 -04:00
Thomas Harte
3da2e91acf
Adjusts range of output, makes declaration of level
full owner of type information.
2020-04-17 23:29:09 -04:00
Thomas Harte
3948304172
Attempts to use table-based maths.
2020-04-17 23:23:16 -04:00
Thomas Harte
4a295cd95e
Wraps log_sin in an access function to enshrine sign and mask rules; switches both functions to non-math.h clashing names.
2020-04-17 23:22:42 -04:00
Thomas Harte
6f7c8b35c5
Applies an ahead-of-time transformation to the exp
table, and wraps it in a helper function.
2020-04-17 22:33:13 -04:00
Thomas Harte
e58ba27c00
Clarifies meaning of scaling. Though it isn't yet applied.
2020-04-17 22:30:10 -04:00
Thomas Harte
0aceddd088
Starts tidying up the OPL2.
...
This is as a precursor to switching to using the proper table lookups, which I hope will automatically fix my range issues.
2020-04-15 22:10:50 -04:00
Thomas Harte
30ff399218
With some fixes for scale, I think possibly this is close for melodic channels.
2020-04-15 21:27:27 -04:00
Thomas Harte
a7e63b61eb
Just from printing numbers: corrects transition from attack to decay.
2020-04-15 00:26:01 -04:00
Thomas Harte
b13b0d9311
Starts towards implementing some OPL test cases.
2020-04-14 23:51:45 -04:00
Thomas Harte
d8380dc3e2
Tries to be a little neater in spelling out the work here.
...
I think I'm somewhat circling here now; I need to think of a way of getting clean comparison data.
2020-04-14 21:55:42 -04:00
Thomas Harte
d805e9a8f0
Actually, octave probably works this way around? Higher octaves = higher frequencies.
2020-04-14 21:39:12 -04:00
Thomas Harte
aa45142728
Endeavours to fix attenuation and add FM synthesis.
...
I now definitely think my frequency counting is wrong.
2020-04-14 18:32:06 -04:00
Thomas Harte
09d1aed3a5
Attempts to voice the current attenuation (and, therefore, the ADSR output), even if linearly rather than logarithmically.
2020-04-13 22:12:55 -04:00
Thomas Harte
a1f80b5142
Takes a stab at per-operator ADSR.
...
Heavy caveats apply: no KSR is applied, non-ADSR attenuation isn't applied, attenuation isn't voiced in general.
2020-04-13 21:39:06 -04:00
Thomas Harte
d3fbdba77c
Add missing #include.
2020-04-12 14:20:02 -04:00
Thomas Harte
632d797c9d
Adjusts frequency formula. This could be close.
...
I guess next I need to get ADSR/volume in general working, before I can go FM? Then I'll worry about using the proper log-sin/exp tables.
2020-04-12 14:15:09 -04:00
Thomas Harte
559a2d81c1
Baby step: starts trying to output the raw FM carrier, no modulation, no ADSR.
2020-04-12 12:46:40 -04:00
Thomas Harte
7a5f23c0a5
Adds accommodations for the OPLL.
2020-04-10 22:05:22 -04:00
Thomas Harte
84b115f15f
Attempts to move forward in defining what the parts of an OPL are meant to do.
2020-04-10 19:13:52 -04:00
Thomas Harte
a0d14f4030
Starts trying to make sense of the various fields at play.
2020-04-08 23:15:44 -04:00
Thomas Harte
dd6769bfbc
Splits OPLL and OPL2 classes.
...
Logic is: they have different mixers (additive in the OPL2, time-division multiplexing in the OPLL) as well as different register sets. So I'll put operator and channel logic directly into those structs.
2020-04-07 23:15:26 -04:00
Thomas Harte
db4b71fc9a
Adds correct LSFR, something of OPLL -> OPL2 logic.
2020-04-05 22:57:53 -04:00
Thomas Harte
0ed7d257e1
Add some extra notes, implement correct mapping to only 18 operators. Not 22.
2020-04-05 14:32:55 -04:00
Thomas Harte
335a68396f
Attempts to complete OPL2 register decoding.
2020-04-04 23:39:09 -04:00
Thomas Harte
84cdf6130f
Starts at least trying to decode OPL2 register writes.
2020-04-04 23:29:25 -04:00
Thomas Harte
b0abc4f7bb
Implements enough wiring that the Master System will instantiate and talk to an OPLL.
2020-04-03 20:05:36 -04:00
Thomas Harte
a7e1920597
Restores ColecoVision runtime options.
2020-03-18 00:06:52 -04:00
Thomas Harte
394ee61c78
Starts a switch to reflectable-style runtime options.
...
The Amstrad CPC and ZX80/81 have made the jump so far, subject to caveats. The macOS build is unlikely currently to work properly.
2020-03-16 23:25:05 -04:00
Thomas Harte
545a6177bb
Makes CompoundSource mono/stereo-aware.
2020-02-16 18:45:36 -05:00
Thomas Harte
50d356be2f
Ensures all audio sources, including compound sources, announce whether they're stereo correctly.
2020-02-16 18:31:45 -05:00
Thomas Harte
9835e800ec
Fixed: individual audio generators now either are or are not stereo. The speaker acts accordingly.
2020-02-16 18:28:03 -05:00
Thomas Harte
337cb4fb86
Resolves implicit type conversion warnings.
2020-02-16 14:05:23 -05:00
Thomas Harte
f760a68173
Corrects stereo audio generation.
2020-02-16 00:19:49 -05:00
Thomas Harte
89d6b85b83
Adds optional stereo output for the AY.
...
The real chip provides the three tone channels as separate outputs, so a variety of different mixings can exist.
2020-02-15 18:09:17 -05:00
Thomas Harte
e02d109864
Nudges the LowpassSpeaker towards supporting stereo generation.
2020-02-15 18:03:12 -05:00
Thomas Harte
dde672701f
Merge pull request #755 from TomHarte/ExpliticLambdas
...
Tries to be less lazy with lambda captures.
2020-02-15 12:38:12 -05:00
Thomas Harte
9ca2d8f9f2
Tried to be less lazy with lambda captures.
...
This is primarily defensive.
2020-02-14 23:39:08 -05:00
Thomas Harte
763159a6f6
More neatly ties volume level 0 to silence.
2020-02-14 23:16:10 -05:00
Thomas Harte
6810a6ee58
Adjusts the AY volume scale.
...
Hopefully more accurately to model the real thing.
2020-02-14 22:51:20 -05:00
Thomas Harte
294e09f275
All these 'override's can be 'final's.
...
At least for the purpose of being communicative. I doubt there's much to gain in terms of compiler output — the DiskImageHolder can avoid some virtual lookups but nothing else leaps out.
2020-01-23 22:57:51 -05:00
Thomas Harte
9d97a294a7
Corrects the TMS' get_scaled_scan_status
.
...
I think all platforms are now returning credible numbers.
2020-01-22 19:34:10 -05:00
Thomas Harte
a71c5946f0
Ensures proper manipulation of scan_statuses, leading to the correct result out of a CRTMachine.
...
Possibly with the exception of the TMS, as I appear to have uncovered an unrelated issue there.
2020-01-21 22:28:25 -05:00
Thomas Harte
d97a073d1b
Adds the necessary routine for all machines to be able to respond to get_scan_status.
...
They all just as the CRT, as all are currently based on the CRT. Which doesn't currently know the total clock rate it would need to in order properly to scale the answer to the question. Further thought coming.
2020-01-20 21:45:10 -05:00
Thomas Harte
c755411636
Slightly improves comments.
2020-01-19 20:05:22 -05:00
Thomas Harte
d674fd0e67
The WD uses only the low two bits for sector size.
2020-01-18 13:40:50 -05:00
Thomas Harte
aac3d27c10
Adds activity indicators for the BD-500 and Jasmin.
...
Also slightly cleans up DiskController a little further.
2020-01-15 23:39:15 -05:00
Thomas Harte
2d233b6358
Makes a more concrete attempt at track/sector combination.
2020-01-12 22:18:31 -05:00
Thomas Harte
6a44936a7c
Ensures programmatic volume level 0 is completely off.
2020-01-05 22:44:52 -05:00
Thomas Harte
c1bae49a92
Standardises on read
and write
for bus accesses.
...
Logic being: name these things for the bus action they model, not the effect they have.
2020-01-05 13:40:02 -05:00
Thomas Harte
153f60735d
Banishes redefined macro warning.
2020-01-01 12:38:30 -05:00
Thomas Harte
e59de71d79
Disables status logging, at least until next needed.
2019-12-24 21:44:50 -05:00
Thomas Harte
4205e95883
Switches to capture of the track 0 flag during a type 1 operation.
2019-12-24 21:43:20 -05:00
Thomas Harte
dfa6b11737
Adds responsibility for an ongoing index pulse to the drive.
2019-12-24 20:53:37 -05:00
Thomas Harte
42926e72cc
Adjusted: Flag::WriteProtect works in real time for a type-1 status.
2019-12-24 19:57:12 -05:00
Thomas Harte
80cb06eb33
It provisionally seems as though spin_up should be reset by a force interrupt?
2019-12-24 19:37:37 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
ac604b30f3
Eliminates dangling static_cast
s in favour of construction.
2019-12-22 20:59:20 -05:00
Thomas Harte
b035b92f33
Corrects accidental use of sector contents as addresses in multi-sector reads and writes.
...
As a secondary defect, this was also causing erroneous CRC error reports.
2019-12-22 19:58:02 -05:00
Thomas Harte
d25b48878c
Cleans up READ_ID macro, inter alia.
2019-12-22 17:58:33 -05:00
Thomas Harte
274867579b
Deploys constexpr
as a stricter const
.
2019-12-22 00:22:17 -05:00
Thomas Harte
a847654ef2
Corrects various old-fashioned bits of indentation, plus the odd const.
2019-12-22 00:00:23 -05:00
Thomas Harte
57ce10418f
Switches prescale logic, the better to deal with changes in prescaler.
...
According to my assumptions about the behaviour, anyway.
2019-12-20 23:33:14 -05:00
Thomas Harte
2a1520c04e
Removes mostly-uninformative piece of logging.
2019-12-19 22:58:28 -05:00
Thomas Harte
45a391d69e
Increases quantity of annotations.
...
I'm now at almost 500 lines, and I haven't even really written anything yet.
2019-12-18 22:57:12 -05:00
Thomas Harte
15bc18b64f
Merge branch 'master' into FurtherSCC
2019-12-18 22:17:10 -05:00
Thomas Harte
206ab380c7
Introduces double-resolution envelopes for the Atari ST.
2019-12-18 22:03:02 -05:00
Thomas Harte
d85ae21b2f
Adds an explicit declaration of chip type to all AY users.
2019-12-18 19:28:41 -05:00
Thomas Harte
7d9bedf7de
Merge branch 'master' into FurtherSCC
2019-12-17 22:39:39 -05:00
Thomas Harte
c2646a415f
Switch to faster timer implementation; it seems to work.
2019-12-09 19:23:08 -05:00
Thomas Harte
7cd11ecb7f
Adds necessary #include for assert
.
2019-12-08 22:43:39 -05:00
Thomas Harte
acfe2c63b8
Adds an assert to verify the interrupt line is clear after a full reset.
2019-12-08 22:34:19 -05:00
Thomas Harte
b192381928
Implements a fuller reset, takes a run at the overran flag.
2019-12-08 21:20:06 -05:00
Thomas Harte
7ff57f8cdf
Starts to flesh out documentation.
2019-11-19 22:32:07 -05:00
Thomas Harte
06edeea866
Adds reload during event count mode.
...
Plus a helpful bit of TODO.
2019-11-19 22:24:32 -05:00
Thomas Harte
e0ceab6642
Pivots towards looking at Timer B as a cause of in-frame inaccuracy.
2019-11-19 21:52:50 -05:00
Thomas Harte
0ce5057fd9
Attempts to factor in event counting direction.
2019-11-18 22:37:20 -05:00
Thomas Harte
6ec3c47cc0
Ensures same-level interrupts don't double trigger.
2019-11-12 22:18:13 -05:00
Thomas Harte
d6edfa5c6d
Removes the redundant state encased within interrupt_causes_.
2019-11-11 21:49:02 -05:00
Thomas Harte
072b0266af
It seems status reads are not required to clear the interrupt line.
2019-11-09 20:12:09 -05:00
Thomas Harte
5fc4e57db7
Eliminates non-portable use of fls
.
2019-11-09 16:03:00 -05:00
Thomas Harte
e3abbc9966
Renames what didn't end up being a whole SerialPort.
2019-11-09 15:21:51 -05:00
Thomas Harte
8c736a639a
Eliminates unexpected bottleneck created by ACIA.
2019-11-09 15:00:12 -05:00
Thomas Harte
14e790746b
Fixes return value when reading received data.
2019-11-02 21:25:00 -04:00
Thomas Harte
75e34b4215
Reacts to no acknowledgement.
2019-10-31 21:00:05 -04:00
Thomas Harte
a5bbf54a27
Adds the ability for the 68901 to decline an interrupt acknowledgement.
2019-10-31 19:57:36 -04:00
Thomas Harte
731dc350b4
Adds sometime real-time clocking for DMA.
2019-10-30 22:59:32 -04:00
Thomas Harte
635e18a50d
Ensures the MFP requests and receives real-time clocking when needed.
2019-10-30 22:42:06 -04:00
Thomas Harte
4857ceb3eb
Attempts to get a bit more systematic.
...
Spotted that interrupt_enable_ isn't being used properly while doing so, hopefully that's now correct.
2019-10-29 23:16:08 -04:00
Thomas Harte
1c154131f9
Expands size of storage in Cycles/HalfCycles; adjusts widely to compensate.
2019-10-29 22:36:29 -04:00
Thomas Harte
fd02b6fc18
Corrects in-service test; adds pending clearing upon enabled clearing.
2019-10-28 22:51:00 -04:00
Thomas Harte
553f3b6d8b
Properly conforms to GPIP input/output blending.
2019-10-28 22:37:11 -04:00
Thomas Harte
a5057e6540
Ensures that stop means stop.
2019-10-28 22:12:45 -04:00
Thomas Harte
aa52652027
Adds a const.
2019-10-28 21:21:35 -04:00
Thomas Harte
5f6711b72c
Ensures interrupt changes are notified to the delegate.
2019-10-28 21:13:06 -04:00
Thomas Harte
de1bfb4e24
Stores and returns timer configuration.
2019-10-27 22:38:49 -04:00
Thomas Harte
0082dc4411
Improves logging.
2019-10-27 00:02:55 -04:00
Thomas Harte
22754683f8
Ensures timer divisor values don't go out of range, adds timer interrupts.
...
I suspect further timer issues remain.
2019-10-26 23:20:13 -04:00
Thomas Harte
e89be6249d
Adds a logging prefix.
2019-10-26 22:38:56 -04:00
Thomas Harte
e96386f572
Takes another stab at MFP interrupt management.
2019-10-26 15:55:19 -04:00
Thomas Harte
a8d481a764
Writes to the pending register appear to be able to clear interrupts too.
2019-10-25 22:46:30 -04:00
Thomas Harte
872897029e
Attempts a complete wiring of 68901 interrupts.
2019-10-25 22:36:01 -04:00
Thomas Harte
7a2de47f58
Corrects interrupt mask generation.
2019-10-24 22:37:32 -04:00
Thomas Harte
f2f98ed60c
Attempts some part of interrupt decision making.
2019-10-24 22:33:42 -04:00
Thomas Harte
77f14fa638
Starts trying to make sense of interrupts.
2019-10-23 23:09:49 -04:00
Thomas Harte
f09a240e6c
Gives myself more trace details.
2019-10-21 23:20:03 -04:00
Thomas Harte
e30ba58e0d
Attempts to wire ACIA interrupt signals into the MFP.
2019-10-21 23:02:30 -04:00
Thomas Harte
7cb82fccc0
Attempts properly to maintain interrupt flag; adds delegate.
2019-10-21 22:40:38 -04:00
Thomas Harte
ed9a5b0430
Adds receipt interrupt.
2019-10-21 21:27:57 -04:00
Thomas Harte
8f59a73425
Corrects incoming data capture.
2019-10-21 20:18:52 -04:00
Thomas Harte
91223b9ec8
Sets default level to high.
2019-10-21 20:18:33 -04:00