MORESTACK_RET_RESTORE_R10; which are lowered to a RET and a RET
followed by a MOV respectively. Having a fake instruction prevents
the verifier from seeing a MachineBasicBlock end with a
non-terminator (MOV). It also prevents the rather eccentric case of a
MachineBasicBlock ending with RET but having successors nevertheless.
Patch by Sanjoy Das.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143062 91177308-0d34-0410-b5e6-96231b3b80d8
discussions with Andy. Fundamentally, the previous algorithm is both
counter productive on several fronts and prioritizing things which
aren't necessarily the most important: static branch prediction.
The new algorithm uses the existing loop CFG structure information to
walk through the CFG itself to layout blocks. It coalesces adjacent
blocks within the loop where the CFG allows based on the most likely
path taken. Finally, it topologically orders the block chains that have
been formed. This allows it to choose a (mostly) topologically valid
ordering which still priorizes fallthrough within the structural
constraints.
As a final twist in the algorithm, it does violate the CFG when it
discovers a "hot" edge, that is an edge that is more than 4x hotter than
the competing edges in the CFG. These are forcibly merged into
a fallthrough chain.
Future transformations that need te be added are rotation of loop exit
conditions to be fallthrough, and better isolation of cold block chains.
I'm also planning on adding statistics to model how well the algorithm
does at laying out blocks based on the probabilities it receives.
The old tests mostly still pass, and I have some new tests to add, but
the nested loops are still behaving very strangely. This almost seems
like working-as-intended as it rotated the exit branch to be
fallthrough, but I'm not convinced this is actually the best layout. It
is well supported by the probabilities for loops we currently get, but
those are pretty broken for nested loops, so this may change later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142743 91177308-0d34-0410-b5e6-96231b3b80d8
SHL inserts zeros from the right, thus even when the original
sign_extend_inreg value was of 1-bit, we need to sra.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142724 91177308-0d34-0410-b5e6-96231b3b80d8
ZExtPromotedInteger and SExtPromotedInteger based on the operation we legalize.
SetCC return type needs to be legalized via PromoteTargetBoolean.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142660 91177308-0d34-0410-b5e6-96231b3b80d8
it's a bit more plausible to use this instead of CodePlacementOpt. The
code for this was shamelessly stolen from CodePlacementOpt, and then
trimmed down a bit. There doesn't seem to be much utility in returning
true/false from this pass as we may or may not have rewritten all of the
blocks. Also, the statistic of counting how many loops were aligned
doesn't seem terribly important so I removed it. If folks would like it
to be included, I'm happy to add it back.
This was probably the most egregious of the missing features, and now
I'm going to start gathering some performance numbers and looking at
specific loop structures that have different layout between the two.
Test is updated to include both basic loop alignment and nested loop
alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142645 91177308-0d34-0410-b5e6-96231b3b80d8
canonical example I used when developing it, and is one of the primary
motivating real-world use cases for __builtin_expect (when burried under
a macro).
I'm working on more test cases here, but I'm trying to make sure both
that the pass is doing the right thing with the test cases and that they
aren't too brittle to changes elsewhere in the code generation pipeline.
Feedback and/or suggestions on how to test this are very welcome.
Especially feedback on whether testing the block comments is a good
strategy; I couldn't find any good examples to steal from but all the
other ideas I had were a lot uglier or more fragile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142644 91177308-0d34-0410-b5e6-96231b3b80d8
When checking the availability of instructions using the TLI, a 'promoted'
instruction IS available. It means that the value is bitcasted to another type
for which there is an operation. The correct check for the availablity of an
instruction is to check if it should be expanded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142542 91177308-0d34-0410-b5e6-96231b3b80d8
.file filenumber "directory" "filename"
This removes one join+split of the directory+filename in MC internals. Because
bitcode files have independent fields for directory and filenames in debug info,
this patch may change the .o files written by existing .bc files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142300 91177308-0d34-0410-b5e6-96231b3b80d8
When spilling around an instruction with a dead def, remember to add a
value number for the def.
The missing value number wouldn't normally create problems since there
would be an incoming live range as well. However, due to another bug
we could spill a dead V_SET0 instruction which doesn't read any values.
The missing value number caused an empty live range to be created which
is dangerous since it doesn't interfere with anything.
This fixes part of PR11125.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141923 91177308-0d34-0410-b5e6-96231b3b80d8
release the stack segment and reset the stack pointer. Place the code in its own
MBB to make the verifier happy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141859 91177308-0d34-0410-b5e6-96231b3b80d8
Now that MI->getRegClassConstraint() can also handle inline assembly,
don't bail when recomputing the register class of a virtual register
used by inline asm.
This fixes PR11078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141836 91177308-0d34-0410-b5e6-96231b3b80d8
our current machine instruction defines a register with the same register class
as what's being replaced. This showed up in the SPEC 403.gcc benchmark, where it
would ICE because a tail call was expecting one register class but was given
another. (The machine instruction verifier catches this situation.)
<rdar://problem/10270968>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141830 91177308-0d34-0410-b5e6-96231b3b80d8
file. Since it should only be used when necessary propagate it through
the backend code generation and tweak testcases accordingly.
This helps with code like in clang's test/CodeGen/debug-info-line.c where
we have multiple #line directives within a single lexical block and want
to generate only a single block that contains each file change.
Part of rdar://10246360
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141729 91177308-0d34-0410-b5e6-96231b3b80d8
For example, MachineLICM should not hoist a load that is not guaranteed to be executed.
Radar 10254254.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141689 91177308-0d34-0410-b5e6-96231b3b80d8
For example, MachineLICM should not hoist a load that is not guaranteed to be executed.
Radar 10254254.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141569 91177308-0d34-0410-b5e6-96231b3b80d8
In 64-bit mode, sub_8bit_hi sub-registers can only be used by NOREX
instructions. The COPY created from the EXTRACT_SUBREG DAG node cannot
target all GR8 registers, only those in GR8_NOREX.
TO enforce this, we ensure that all instructions using the
EXTRACT_SUBREG are GR8_NOREX constrained.
This fixes PR11088.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141499 91177308-0d34-0410-b5e6-96231b3b80d8
and the alignment is 0 (i.e., it's defined globally in one file and declared in
another file) it could get an alignment which is larger than the ABI allows for
that type, resulting in aligned moves being used for unaligned loads.
For instance, in file A.c:
struct S s;
In file B.c:
struct {
// something long
};
extern S s;
void foo() {
struct S p = s;
// ...
}
this copy is a 'memcpy' which is turned into a series of 'movaps' instructions
on X86. But this is wrong, because 'struct S' has alignment of 4, not 16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140902 91177308-0d34-0410-b5e6-96231b3b80d8
Rewriting the entire loop nest now requires -enable-lsr-nested.
See PR11035 for some performance data.
A few unit tests specifically test nested LSR, and are now under a flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140762 91177308-0d34-0410-b5e6-96231b3b80d8
This also enables domain swizzling for AVX code which required a few
trivial test changes.
The pass will be moved to lib/CodeGen shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140659 91177308-0d34-0410-b5e6-96231b3b80d8
floating point add/sub of appropriate shuffle vectors. Does not
synthesize the 256 bit AVX versions because they work differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140332 91177308-0d34-0410-b5e6-96231b3b80d8
Few weeks ago, llvm completely inverted the debug info graph. Earlier each debug info node used to keep track of its compile unit, now compile unit keeps track of important nodes. One impact of this change is that the global variable's do not have any context, which should be checked before deciding to use AT_specification DIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140282 91177308-0d34-0410-b5e6-96231b3b80d8
Vector SetCC result types need to be type-legalized.
This code worked before because scalar result types are known to be legal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140249 91177308-0d34-0410-b5e6-96231b3b80d8
On Windows x64, 128-bit arguments are not passed by reg but by indirect. eg.
maxpd:
vmovapd (%rcx), %xmm0
vmaxpd (%rdx), %xmm0, %xmm0
FIXME: I don't care YMM on x64 for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140143 91177308-0d34-0410-b5e6-96231b3b80d8
dag-combine optimization to implement the ext-load efficiently (using shuffles).
For example the type <4 x i8> is stored in memory as i32, but it needs to
find its way into a <4 x i32> register. Previously we scalarized the memory
access, now we use shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139995 91177308-0d34-0410-b5e6-96231b3b80d8
maxps and maxpd). This broke the sse41-blend.ll testcase by causing
maxpd to be produced rather than a cmp+blend pair, which is the reason
I tweaked it. Gives a small speedup on doduc with dragonegg when the
GCC vectorizer is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139986 91177308-0d34-0410-b5e6-96231b3b80d8
take into consideration the presence of AVX. This change, together with
the SSEDomainFix enabled for AVX, makes AVX codegen to always (hopefully)
emit the same code as SSE for 128-bit vector ops. I don't
have a testcase for this, but AVX now beats SSE in performance for
128-bit ops in the majority of programas in the llvm testsuite
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139817 91177308-0d34-0410-b5e6-96231b3b80d8
An improper SlotIndex->VNInfo lookup was leading to unsafe copy removal.
Fixes PR10920 401.bzip2 miscompile with no IV rewrite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139765 91177308-0d34-0410-b5e6-96231b3b80d8
However with this fix it does now.
Basically the operand order for the x86 target specific node
is not the same as the instruction, but since the intrinsic need that
specific order at the instruction definition, just change the order
during legalization. Also, there were some wrong invertions of condition
codes, such as GE => LE, GT => LT, fix that too. Fix PR10907.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139528 91177308-0d34-0410-b5e6-96231b3b80d8
assert("not implemented for target shuffle node");
to:
assert(0 && "not implemented for target shuffle node");
This causes a test failure in CodeGen/X86/palignr.ll which has
been marked as XFAIL for the time being.
Test failure filed at PR10901.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139454 91177308-0d34-0410-b5e6-96231b3b80d8
in Nadav's r139285 and r139287 commits.
1) Rename vsel.ll to a more descriptive name
2) Change the order of BLEND operands to "Op1, Op2, Cond", this is
necessary because PBLENDVB is already used in different places with
this order, and it was being emitted in the wrong way for vselect
3) Add AVX patterns and tests for the same SSE41 instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139305 91177308-0d34-0410-b5e6-96231b3b80d8
The explanation about a 0 argument being materialized as xor is no
longer valid. Rematerialization will check if EFLAGS is live before
clobbering it.
The code produced by X86TargetLowering::EmitLoweredSelect does not
clobber EFLAGS.
This causes one less testb instruction to be generated in the cmov.ll
test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139057 91177308-0d34-0410-b5e6-96231b3b80d8
Added canClobberReachingPhysRegUse() to handle a particular pattern in
which a two-address instruction could be forced to interfere with
EFLAGS, causing a compare to be unnecessarilly cloned.
Fixes rdar://problem/5875261
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138924 91177308-0d34-0410-b5e6-96231b3b80d8
Emit a repeated sequence of bytes using .zero. This saves an enormous
amount of asm file space for certain programs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138864 91177308-0d34-0410-b5e6-96231b3b80d8
- Duplicate some store patterns to their AVX forms!
- Catched a bug while restricting the patterns subtarget, fix it
and update a testcase to check it properly
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138851 91177308-0d34-0410-b5e6-96231b3b80d8
SSE transition penalty. The pass is enabled through the "x86-use-vzeroupper"
llc command line option. This is only the first step (very naive and
conservative one) to sketch out the idea, but proper DFA is coming next
to allow smarter decisions. Comments and ideas now and in further commits
will be very appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138317 91177308-0d34-0410-b5e6-96231b3b80d8
match splats in the form (splat (scalar_to_vector (load ...))) whenever
the load can be folded. All the logic and instruction emission is
working but because of PR8156, there are no ways to match loads, cause
they can never be folded for splats. Thus, the tests are XFAILed, but
I've tested and exercised all the logic using a relaxed version for
checking the foldable loads, as if the bug was already fixed. This
should work out of the box once PR8156 gets fixed since MayFoldLoad will
work as expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137810 91177308-0d34-0410-b5e6-96231b3b80d8
vinsertf128 $1 + vpermilps $0, remove the old code that used to first
do the splat in a 128-bit vector and then insert it into a larger one.
This is better because the handling code gets simpler and also makes a
better room for the upcoming vbroadcast!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137807 91177308-0d34-0410-b5e6-96231b3b80d8
there is no support for native 256-bit shuffles, be more smart in some
cases, for example, when you can extract specific 128-bit parts and use
regular 128-bit shuffles for them. Example:
For this shuffle:
shufflevector <4 x i64> %a, <4 x i64> %b, <4 x i32>
<i32 1, i32 0, i32 7, i32 6>
This was expanded to:
vextractf128 $1, %ymm1, %xmm2
vpextrq $0, %xmm2, %rax
vmovd %rax, %xmm1
vpextrq $1, %xmm2, %rax
vmovd %rax, %xmm2
vpunpcklqdq %xmm1, %xmm2, %xmm1
vpextrq $0, %xmm0, %rax
vmovd %rax, %xmm2
vpextrq $1, %xmm0, %rax
vmovd %rax, %xmm0
vpunpcklqdq %xmm2, %xmm0, %xmm0
vinsertf128 $1, %xmm1, %ymm0, %ymm0
ret
Now we get:
vshufpd $1, %xmm0, %xmm0, %xmm0
vextractf128 $1, %ymm1, %xmm1
vshufpd $1, %xmm1, %xmm1, %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137733 91177308-0d34-0410-b5e6-96231b3b80d8
vectors. It operates on 128-bit elements instead of regular scalar
types. Recognize shuffles that are suitable for VPERM2F128 and teach
the x86 legalizer how to handle them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137519 91177308-0d34-0410-b5e6-96231b3b80d8
inserts and extracts. This simple combine makes us generate only 1
instruction instead of 11 in the v8 case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137362 91177308-0d34-0410-b5e6-96231b3b80d8
1) check for the "v" version of movaps
2) add a couple of CHECK-NOT to guarantee the behavior
3) move to a more appropriate test file
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137361 91177308-0d34-0410-b5e6-96231b3b80d8
(for example, after integer operation), do not pack the registers into a YMM
before saving. Its better to save as two XMM registers.
Before:
vinsertf128 $1, %xmm3, %ymm0, %ymm3
vinsertf128 $0, %xmm1, %ymm3, %ymm1
vmovaps %ymm1, 416(%rsp)
After:
vmovaps %xmm3, 416+16(%rsp)
vmovaps %xmm1, 416(%rsp)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137308 91177308-0d34-0410-b5e6-96231b3b80d8
data in-register prior to saving to memory. When we reorder the data in memory
we prevent the need to save multiple scalars to memory, making a single regular
store.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137238 91177308-0d34-0410-b5e6-96231b3b80d8
def : Pat<(X86Movss VR128:$src1,
(bc_v4i32 (v2i64 (load addr:$src2)))),
(MOVLPSrm VR128:$src1, addr:$src2)>;
This matches a MOVSS dag with a MOVLPS instruction. However, MOVSS will replace only the low 32 bits of the register, while the MOVLPS instruction will replace the low 64 bits. A testcase is added and illustrates the bug and also modified the one that was already present. Patch by Tanya Lattner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137227 91177308-0d34-0410-b5e6-96231b3b80d8
X86FloatingPoint keeps track of pending ST registers for an upcoming
inline asm instruction with fixed stack register constraints. It does
this by remembering which FP register holds the value that should appear
at a fixed stack position for the inline asm.
When that FP register is killed before the inline asm, make sure to
duplicate it to a scratch register, so the ST register still has a live
FP reference.
This could happen when the same FP register was copied to two ST
registers, or when a spill instruction is inserted between the ST copy
and the inline asm.
This fixes PR10602.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137050 91177308-0d34-0410-b5e6-96231b3b80d8
externally visable, create a local symbol to use in the CFE. If not, use the
function label itself.
Fixes PR10420.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136716 91177308-0d34-0410-b5e6-96231b3b80d8
avoid returning early for v8i32 types, which would only be valid for
vector with all zeros. Also split the handling of zeros and ones into separate
checking logic since they are handled differently. This fixes PR10547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136642 91177308-0d34-0410-b5e6-96231b3b80d8
This includes registers like EFLAGS and ST0-ST7. We don't check for
liveness issues in the verifier and scavenger because registers will
never be allocated from these classes.
While in SSA form, we do care about the liveness of unallocatable
unreserved registers. Liveness of EFLAGS and ST0 neds to be correct for
MachineDCE and MachineSinking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136541 91177308-0d34-0410-b5e6-96231b3b80d8
usage of the shuffle bitmask. Both work in 128-bit lanes without
crossing, but in the former the mask of the high part is the same
used by the low part while in the later both lanes have independent
masks. Handle this properly and and add support for vpermilpd.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136200 91177308-0d34-0410-b5e6-96231b3b80d8
These copies would coalesce easily, but the resulting value would be
defined by a deleted instruction. Now we also remove the undefined value
number from the destination register.
This fixes PR10503.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136174 91177308-0d34-0410-b5e6-96231b3b80d8
On x86 we can't encode an immediate LHS of a sub directly. If the RHS comes from a XOR with a constant we can
fold the negation into the xor and add one to the immediate of the sub. Then we can turn the sub into an add,
which can be commuted and encoded efficiently.
This code is generated for __builtin_clz and friends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136167 91177308-0d34-0410-b5e6-96231b3b80d8
different from the previous 128-bit because they work in lanes.
Update a few comments and add testcases
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136157 91177308-0d34-0410-b5e6-96231b3b80d8
