The vld1-lane, vld1-dup and vst1-lane instructions do not yet support using
post-increment versions, but all the rest of the NEON load/store instructions
should be handled now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125014 91177308-0d34-0410-b5e6-96231b3b80d8
Unified EmitTextAttribute for both Asm and Obj emission (.cpu only)
Added necessary cortex-A8 related attrs for codegen compat tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124995 91177308-0d34-0410-b5e6-96231b3b80d8
Reversing the operands allows us to fold, but doesn't force us to. Also, at
this point the DAG is still being optimized, so the check for hasOneUse is not
very precise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124773 91177308-0d34-0410-b5e6-96231b3b80d8
the load, then it may be legal to transform the load and store to integer
load and store of the same width.
This is done if the target specified the transformation as profitable. e.g.
On arm, this can transform:
vldr.32 s0, []
vstr.32 s0, []
to
ldr r12, []
str r12, []
rdar://8944252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124708 91177308-0d34-0410-b5e6-96231b3b80d8
This happens all the time when a smul is promoted to a larger type.
On x86-64 we now compile "int test(int x) { return x/10; }" into
movslq %edi, %rax
imulq $1717986919, %rax, %rax
movq %rax, %rcx
shrq $63, %rcx
sarq $34, %rax <- used to be "shrq $32, %rax; sarl $2, %eax"
addl %ecx, %eax
This fires 96 times in gcc.c on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124559 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fixed ARM pc adjustment.
2. Fixed dynamic-no-pic codegen
3. CSE of pc-relative load of global addresses.
It's now enabled by default for Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123991 91177308-0d34-0410-b5e6-96231b3b80d8
DAG. Disable using "-disable-sched-cycles".
For ARM, this enables a framework for modeling the cpu pipeline and
counting stalls. It also activates several heuristics to drive
scheduling based on the model. Scheduling is inherently imprecise at
this stage, and until spilling is improved it may defeat attempts to
schedule. However, this framework provides greater control over
tuning codegen.
Although the flag is not target-specific, it should have very little
affect on the default scheduler used by x86. The only two changes that
affect x86 are:
- scheduling a high-latency operation bumps the current cycle so independent
operations can have their latency covered. i.e. two independent 4
cycle operations can produce results in 4 cycles, not 8 cycles.
- Two operations with equal register pressure impact and no
latency-based stalls on their uses will be prioritized by depth before height
(height is irrelevant if no stalls occur in the schedule below this point).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123971 91177308-0d34-0410-b5e6-96231b3b80d8
flags. They are still not enable in this revision.
Added TargetInstrInfo::isZeroCost() to fix a fundamental problem with
the scheduler's model of operand latency in the selection DAG.
Generalized unit tests to work with sched-cycles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123969 91177308-0d34-0410-b5e6-96231b3b80d8
value, the "add pc" must be CSE'ed at the same time. We could follow the same
approach as T2 by adding pseudo instructions that combine the ldr + "add pc".
But the better approach is to use movw + movt (which I will enable soon), so
I'll leave this as a TODO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123949 91177308-0d34-0410-b5e6-96231b3b80d8
to add/sub by doing the normal operation and then checking for overflow
afterwards. This generally relies on the DAG handling the later invalid
operations as well.
Fixes the 64-bit part of rdar://8622122 and rdar://8774702.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123908 91177308-0d34-0410-b5e6-96231b3b80d8
TargetInstrInfo:
Change produceSameValue() to take MachineRegisterInfo as an optional argument.
When in SSA form, targets can use it to make more aggressive equality analysis.
Machine LICM:
1. Eliminate isLoadFromConstantMemory, use MI.isInvariantLoad instead.
2. Fix a bug which prevent CSE of instructions which are not re-materializable.
3. Use improved form of produceSameValue.
ARM:
1. Teach ARM produceSameValue to look pass some PIC labels.
2. Look for operands from different loads of different constant pool entries
which have same values.
3. Re-implement PIC GA materialization using movw + movt. Combine the pair with
a "add pc" or "ldr [pc]" to form pseudo instructions. This makes it possible
to re-materialize the instruction, allow machine LICM to hoist the set of
instructions out of the loop and make it possible to CSE them. It's a bit
hacky, but it significantly improve code quality.
4. Some minor bug fixes as well.
With the fixes, using movw + movt to materialize GAs significantly outperform the
load from constantpool method. 186.crafty and 255.vortex improved > 20%, 254.gap
and 176.gcc ~10%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123905 91177308-0d34-0410-b5e6-96231b3b80d8
with an invalid type then split the result and perform the overflow check
normally.
Fixes the 32-bit parts of rdar://8622122 and rdar://8774702.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123864 91177308-0d34-0410-b5e6-96231b3b80d8
This shaves off 4 popcounts from the hacked 186.crafty source.
This is enabled even when a native popcount instruction is available. The
combined code is one operation longer but it should be faster nevertheless.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123621 91177308-0d34-0410-b5e6-96231b3b80d8
movw r0, :lower16:(L_foo$non_lazy_ptr-(LPC0_0+4))
movt r0, :upper16:(L_foo$non_lazy_ptr-(LPC0_0+4))
LPC0_0:
add r0, pc, r0
It's not yet enabled by default as some tests are failing. I suspect bugs in
down stream tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123619 91177308-0d34-0410-b5e6-96231b3b80d8
into and/shift would cause nodes to move around and a dangling pointer
to happen. The code tried to avoid this with a HandleSDNode, but
got the details wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123578 91177308-0d34-0410-b5e6-96231b3b80d8
There's an inherent tension in DAGCombine between assuming
that things will be put in canonical form, and the Depth
mechanism that disables transformations when recursion gets
too deep. It would not surprise me if there's a lot of little
bugs like this one waiting to be discovered. The mechanism
seems fragile and I'd suggest looking at it from a design viewpoint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123191 91177308-0d34-0410-b5e6-96231b3b80d8
Instead encode llvm IR level property "HasSideEffects" in an operand (shared
with IsAlignStack). Added MachineInstrs::hasUnmodeledSideEffects() to check
the operand when the instruction is an INLINEASM.
This allows memory instructions to be moved around INLINEASM instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123044 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix an off-by-one in SelectionDAGBuilder that was preventing shuffle
vectors from being translated to EXTRACT_SUBVECTOR.
Patch by Tim Northover.
The test changes are needed to keep those spill-q tests from testing aligned
spills and restores. If the only aligned stack objects are spill slots, we
no longer realign the stack frame. Prior to this patch, an EXTRACT_SUBVECTOR
was legalized by loading from the stack, which created an aligned frame index.
Now, however, there is nothing except the spill slot in the stack frame, so
I added an aligned alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122995 91177308-0d34-0410-b5e6-96231b3b80d8
The theory is it's still faster than a pair of movq / a quad of movl. This
will probably hurt older chips like P4 but should run faster on current
and future Intel processors. rdar://8817010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122955 91177308-0d34-0410-b5e6-96231b3b80d8
etc. takes an option OptSize. If OptSize is true, it would return
the inline limit for functions with attribute OptSize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122952 91177308-0d34-0410-b5e6-96231b3b80d8
up freebsd bootloader. However, this doesn't make much sense for Darwin, whose
-Os is meant to optimize for size only if it doesn't hurt performance.
rdar://8821501
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122936 91177308-0d34-0410-b5e6-96231b3b80d8
prologue and epilogue if the adjustment is 8. Similarly, use pushl / popl if
the adjustment is 4 in 32-bit mode.
In the epilogue, takes care to pop to a caller-saved register that's not live
at the exit (either return or tailcall instruction).
rdar://8771137
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122783 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to compile:
void test(char *s, int a) {
__builtin_memset(s, a, 15);
}
into 1 mul + 3 stores instead of 3 muls + 3 stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122710 91177308-0d34-0410-b5e6-96231b3b80d8
We could implement a DAGCombine to turn x * 0x0101 back into logic operations
on targets that doesn't support the multiply or it is slow (p4) if someone cares
enough.
Example code:
void test(char *s, int a) {
__builtin_memset(s, a, 4);
}
before:
_test: ## @test
movzbl 8(%esp), %eax
movl %eax, %ecx
shll $8, %ecx
orl %eax, %ecx
movl %ecx, %eax
shll $16, %eax
orl %ecx, %eax
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
after:
_test: ## @test
movzbl 8(%esp), %eax
imull $16843009, %eax, %eax ## imm = 0x1010101
movl 4(%esp), %ecx
movl %eax, 4(%ecx)
movl %eax, (%ecx)
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122707 91177308-0d34-0410-b5e6-96231b3b80d8
If the basic block containing the BCCi64 (or BCCZi64) instruction ends with
an unconditional branch, that branch needs to be deleted before appending
the expansion of the BCCi64 to the end of the block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122521 91177308-0d34-0410-b5e6-96231b3b80d8
In the bottom-up selection DAG scheduling, handle two-address
instructions that read/write unspillable registers. Treat
the entire chain of two-address nodes as a single live range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122472 91177308-0d34-0410-b5e6-96231b3b80d8
loads properly. We miscompiled the testcase into:
_test: ## @test
movl $128, (%rdi)
movzbl 1(%rdi), %eax
ret
Now we get a proper:
_test: ## @test
movl $128, (%rdi)
movsbl (%rdi), %eax
movzbl %ah, %eax
ret
This fixes PR8757.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122392 91177308-0d34-0410-b5e6-96231b3b80d8
the shift type was needed one place, the shift count
type another. The transform in 123555 had the same
problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122366 91177308-0d34-0410-b5e6-96231b3b80d8
count operand. These should be the same but apparently are
not always, and this is cleaner anyway. This improves the
code in an existing test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122354 91177308-0d34-0410-b5e6-96231b3b80d8
Type legalization splits up i64 values into pairs of i32 values, which leads
to poor quality code when inserting or extracting i64 vector elements.
If the vector element is loaded or stored, it can be treated as an f64 value
and loaded or stored directly from a VPR register. Use the pre-legalization
DAG combiner to cast those vector elements to f64 types so that the type
legalizer won't mess them up. Radar 8755338.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122319 91177308-0d34-0410-b5e6-96231b3b80d8
the same as setcc. Optimize ADDC(0,0,FLAGS) -> SET_CARRY(FLAGS). This is
a step towards finishing off PR5443. In the testcase in that bug we now get:
movq %rdi, %rax
addq %rsi, %rax
sbbq %rcx, %rcx
testb $1, %cl
setne %dl
ret
instead of:
movq %rdi, %rax
addq %rsi, %rax
movl $0, %ecx
adcq $0, %rcx
testq %rcx, %rcx
setne %dl
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122219 91177308-0d34-0410-b5e6-96231b3b80d8
doesn't, match it back to setb.
On a 64-bit version of the testcase before we'd get:
movq %rdi, %rax
addq %rsi, %rax
sbbb %dl, %dl
andb $1, %dl
ret
now we get:
movq %rdi, %rax
addq %rsi, %rax
setb %dl
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122217 91177308-0d34-0410-b5e6-96231b3b80d8
consistently by moving it out of lowering into dag combine.
Add some missing patterns for matching away extended versions of setcc_c.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122201 91177308-0d34-0410-b5e6-96231b3b80d8
isel is *required* to split the edge. PHI values get evaluated
on the edge, not in their predecessor block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122170 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that ppc backend has really weird interdependencies
over different hooks and all stuff is fragile wrt small changes.
This should fix PR8749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122155 91177308-0d34-0410-b5e6-96231b3b80d8
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122104 91177308-0d34-0410-b5e6-96231b3b80d8
BUILD_VECTOR operands where the element type is not legal. I had previously
changed this code to insert TRUNCATE operations, but that was just wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122102 91177308-0d34-0410-b5e6-96231b3b80d8
Clang is now providing intrinsics for these and so we need to support them
in the backend. Radar 8068427.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121902 91177308-0d34-0410-b5e6-96231b3b80d8
and "save_volatiles" correctly. This completes the custom calling convention
functionality changes for the MBlaze backend that were started in 121888.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121891 91177308-0d34-0410-b5e6-96231b3b80d8
regB = move RCX
regA = op regB, regC
RAX = move regA
where both regB and regC are killed. If regB is constrainted to non-compatible
physical registers but regC is not constrainted at all, then it's better to
commute the instruction.
movl %edi, %eax
shlq $32, %rcx
leaq (%rcx,%rax), %rax
=>
movl %edi, %eax
shlq $32, %rcx
orq %rcx, %rax
rdar://8762995
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121793 91177308-0d34-0410-b5e6-96231b3b80d8
Use the same COPY_TO_REGCLASS approach as for the 2-register *_sfp instructions.
This change made a big difference in the code generated for the
CodeGen/Thumb2/cross-rc-coalescing-2.ll test: The coalescer is still doing
a fine job, but some instructions that were previously moved outside the loop
are not moved now. It's using fewer VFP registers now, which is generally
a good thing, so I think the estimates for register pressure changed and that
affected the LICM behavior. Since that isn't obviously wrong, I've just
changed the test file. This completes the work for Radar 8711675.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121730 91177308-0d34-0410-b5e6-96231b3b80d8
when the wider type is legal. This allows us to compile:
define zeroext i16 @test1(i16 zeroext %x) nounwind {
entry:
%div = udiv i16 %x, 33
ret i16 %div
}
into:
test1: # @test1
movzwl 4(%esp), %eax
imull $63551, %eax, %eax # imm = 0xF83F
shrl $21, %eax
ret
instead of:
test1: # @test1
movw $-1985, %ax # imm = 0xFFFFFFFFFFFFF83F
mulw 4(%esp)
andl $65504, %edx # imm = 0xFFE0
movl %edx, %eax
shrl $5, %eax
ret
Implementing rdar://8760399 and example #4 from:
http://blog.regehr.org/archives/320
We should implement the same thing for [su]mul_hilo, but I don't
have immediate plans to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121696 91177308-0d34-0410-b5e6-96231b3b80d8
Alignments smaller than the total size of the memory being loaded or stored,
unless the alignment is 8 bytes, are not allowed. Add tests for this, too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121506 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise, a plain str/ldr should be used instead. Make sure we account for
that in prologue/epilogue code generation.
rdar://8745460
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121391 91177308-0d34-0410-b5e6-96231b3b80d8
the output to the correct register. Fixes a hidden problem uncovered
by the last patch where we'd try to DAG combine our MVT::Other node
oddly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121358 91177308-0d34-0410-b5e6-96231b3b80d8
Added test to check bl __aeabi_read_tp gets emitted properly for ELF/ASM
as well as ELF/OBJ (including fixup)
Also added support for ELF::R_ARM_TLS_IE32
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121312 91177308-0d34-0410-b5e6-96231b3b80d8
vpush instructions to save / restore VFP / NEON registers like this:
vpush {d8,d10,d11}
vpop {d8,d10,d11}
vpush and vpop do not allow gaps in the register list.
rdar://8728956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121197 91177308-0d34-0410-b5e6-96231b3b80d8
difficult on current ARM implementations for a few reasons.
1. Even though a single vmla has latency that is one cycle shorter than a pair
of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause
additional pipeline stall. So it's frequently better to single codegen
vmul + vadd.
2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to
stall for 4 cycles. We need to schedule them apart.
3. A vmla followed vmla is a special case. Obvious issuing back to back RAW
vmla + vmla is very bad. But this isn't ideal either:
vmul
vadd
vmla
Instead, we want to expand the second vmla:
vmla
vmul
vadd
Even with the 4 cycle vmul stall, the second sequence is still 2 cycles
faster.
Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough
but it isn't the optimial solution. This patch attempts to make it possible to
use vmla / vmls in cases where it is profitable.
A. Add missing isel predicates which cause vmla to be codegen'ed.
B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to
compute a fmul and a fmla.
C. Add additional isel checks for vmla, avoid cases where vmla is feeding into
fp instructions (except for the #3 exceptional case).
D. Add ARM hazard recognizer to model the vmla / vmls hazards.
E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the
vmla / vmls will trigger one of the special hazards.
Work in progress, only A+B are enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120960 91177308-0d34-0410-b5e6-96231b3b80d8
result. This allows us to compile:
void *test12(long count) {
return new int[count];
}
into:
test12:
movl $4, %ecx
movq %rdi, %rax
mulq %rcx
movq $-1, %rdi
cmovnoq %rax, %rdi
jmp __Znam ## TAILCALL
instead of:
test12:
movl $4, %ecx
movq %rdi, %rax
mulq %rcx
seto %cl
testb %cl, %cl
movq $-1, %rdi
cmoveq %rax, %rdi
jmp __Znam
Of course it would be even better if the regalloc inverted the cmov to 'cmovoq',
which would eliminate the need for the 'movq %rdi, %rax'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120936 91177308-0d34-0410-b5e6-96231b3b80d8
backend that they were all implemented except umul. This one fell back
to the default implementation that did a hi/lo multiply and compared the
top. Fix this to check the overflow flag that the 'mul' instruction
sets, so we can avoid an explicit test. Now we compile:
void *func(long count) {
return new int[count];
}
into:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
seto %cl ## encoding: [0x0f,0x90,0xc1]
testb %cl, %cl ## encoding: [0x84,0xc9]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
instead of:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
testq %rdx, %rdx ## encoding: [0x48,0x85,0xd2]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
Other than the silly seto+test, this is using the o bit directly, so it's going in the right
direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120935 91177308-0d34-0410-b5e6-96231b3b80d8
- Also adds a new POPCNT subtarget feature that is currently enabled if the target
supports SSE4.2 (nehalem) or SSE4A (barcelona).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120917 91177308-0d34-0410-b5e6-96231b3b80d8
Lifted adjustFixupValue() from Darwin for sharing w ELF.
Test added
TODO:
refactor ELFObjectWriter::RecordRelocation more.
Possibly share more code with Darwin?
Lots more relocations...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120534 91177308-0d34-0410-b5e6-96231b3b80d8
legalization time. Since at legalization time there is no mapping from
SDNode back to the corresponding LLVM instruction and the return
SDNode is target specific, this requires a target hook to check for
eligibility. Only x86 and ARM support this form of sibcall optimization
right now.
rdar://8707777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120501 91177308-0d34-0410-b5e6-96231b3b80d8
We need to check if the individual vector elements are sign/zero-extended
values. For now this only handles constants values. Radar 8687140.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120034 91177308-0d34-0410-b5e6-96231b3b80d8
state. Previously Thumb2 would restore sp from fp like this:
mov sp, r7
sub, sp, #4
If an interrupt is taken after the 'mov' but before the 'sub', callee-saved
registers might be clobbered by the interrupt handler. Instead, try
restoring directly from sp:
add sp, #4
Or, if necessary (with VLA, etc.) use a scratch register to compute sp and
then restore it:
sub.w r4, r7, #8
mov sp, r7
rdar://8465407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119977 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombine from making an illegal transformation of bitcast of a scalar to a
vector into a scalar_to_vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119819 91177308-0d34-0410-b5e6-96231b3b80d8
if the extension types were not the same. The result was that if you
fed a select with sext and zext loads, as in the testcase, then it
would get turned into a zext (or sext) of the select, which is wrong
in the cases when it should have been an sext (resp. zext). Reported
and diagnosed by Sebastien Deldon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119728 91177308-0d34-0410-b5e6-96231b3b80d8
Remove movePastCSLoadStoreOps and associated code for simple pointer
increments. Update routines that depended upon other opcodes for save/restore.
Adjust all testcases accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119725 91177308-0d34-0410-b5e6-96231b3b80d8
and testing is easier. A good example is the unknown-location.ll test that
now can just look for ".loc 1 0 0". We also don't use a DW_LNE_set_address for
every address change anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119613 91177308-0d34-0410-b5e6-96231b3b80d8
memset; we may need it to decide between MOVAPS and MOVUPS
later. Adjust a test that was looking for wrong code.
PR 3866 / 8675131.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119605 91177308-0d34-0410-b5e6-96231b3b80d8
appear to differ on Linux. Try to make them pass on Linux.
Would be good for a Linux person to review this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119572 91177308-0d34-0410-b5e6-96231b3b80d8
It is generally not sufficient to check if the starting offset is in range
of the maximum offset that can be efficiently used for the target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119565 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it more clear that the symbol is an internal, compiler-generated
name and gives a little more description about its contents.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119564 91177308-0d34-0410-b5e6-96231b3b80d8
It was mistakenly looking at the pointer type when checking for the size of
global variables. This is a partial fix for Radar 8673120.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119563 91177308-0d34-0410-b5e6-96231b3b80d8
and xor. The 32-bit move immediates can be hoisted out of loops by machine
LICM but the isel hacks were preventing them.
Instead, let peephole optimization pass recognize registers that are defined by
immediates and the ARM target hook will fold the immediates in.
Other changes include 1) do not fold and / xor into cmp to isel TST / TEQ
instructions if there are multiple uses. This happens when the 'and' is live
out, machine sink would have sinked the computation and that ends up pessimizing
code. The peephole pass would recognize situations where the 'and' can be
toggled to define CPSR and eliminate the comparison anyway.
2) Move peephole pass to after machine LICM, sink, and CSE to avoid blocking
important optimizations.
rdar://8663787, rdar://8241368
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119548 91177308-0d34-0410-b5e6-96231b3b80d8
The live range of a register defined by an early clobber starts at the use slot,
not the def slot.
Except when it is an early clobber tied to a use operand. Then it starts at the
def slot like a standard def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119305 91177308-0d34-0410-b5e6-96231b3b80d8
live ranges for the spill register are also defined at the use slot instead of
the normal def slot.
This fixes PR8612 for the inline spiller. A use was being allocated to the same
register as a spilled early clobber def.
This problem exists in all the spillers. A fix for the standard spiller is
forthcoming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119182 91177308-0d34-0410-b5e6-96231b3b80d8
support for the case where alignment<value size.
These cases were silently miscompiled before this patch.
Now they are overly verbose -especially storing is- and
any front-end should still avoid misaligned memory
accesses as much as possible. The bit juggling algorithm
added here probably has some room for improvement still.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118889 91177308-0d34-0410-b5e6-96231b3b80d8