be done incrementally and intermixed with the adding of more
AVX instructions. This is a first step in that direction
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106251 91177308-0d34-0410-b5e6-96231b3b80d8
addresses a longstanding deficiency noted in many FIXMEs scattered
across all the targets.
This effectively moves the problem up one level, replacing eleven
FIXMEs in the targets with eight FIXMEs in CodeGen, plus one path
through FastISel where we actually supply a DebugLoc, fixing Radar
7421831.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106243 91177308-0d34-0410-b5e6-96231b3b80d8
for the moment. The implementation of the libcall will follow.
Currently, the llvm-gcc knows when the intrinsics can be correctly handled by
the back end and only generates them in those cases, issuing libcalls directly
otherwise. That's too much coupling. The intrinsics should always be
generated and the back end decide how to handle them, be it with a libcall,
inline code, or whatever. This patch is a step in that direction.
rdar://8097623
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106227 91177308-0d34-0410-b5e6-96231b3b80d8
DW_OP_breg[0..31] to Dwarf.h.
Add "DW_" prefix to the llvm::dwarf::*String methods which did not
already have them in Dwarf.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106197 91177308-0d34-0410-b5e6-96231b3b80d8
LiveVariableAnalysis was a bit picky about a register only being redefined once,
but that really isn't necessary.
Here is an example of chained INSERT_SUBREGs that we can handle now:
68 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1028<kill>, 14
register: %reg1040 +[70,134:0)
76 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1029<kill>, 13
register: %reg1040 replace range with [70,78:1) RESULT: %reg1040,0.000000e+00 = [70,78:1)[78,134:0) 0@78-(134) 1@70-(78)
84 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1030<kill>, 12
register: %reg1040 replace range with [78,86:2) RESULT: %reg1040,0.000000e+00 = [70,78:1)[78,86:2)[86,134:0) 0@86-(134) 1@70-(78) 2@78-(86)
92 %reg1040<def> = INSERT_SUBREG %reg1040, %reg1031<kill>, 11
register: %reg1040 replace range with [86,94:3) RESULT: %reg1040,0.000000e+00 = [70,78:1)[78,86:2)[86,94:3)[94,134:0) 0@94-(134) 1@70-(78) 2@78-(86) 3@86-(94)
rdar://problem/8096390
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106152 91177308-0d34-0410-b5e6-96231b3b80d8
The memcmp will be optimized further and even the pathological case
'strstr(x, "x") == x' generates optimal code now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106097 91177308-0d34-0410-b5e6-96231b3b80d8
will conflict with another live range. The place which creates this scenerio is
the code in X86 that lowers a select instruction by splitting the MBBs. This
eliminates the need to check from the bottom up in an MBB for live pregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106066 91177308-0d34-0410-b5e6-96231b3b80d8
call must not be callee-saved; following x86, add a new
regclass to represent this. Also fixes a couple of bugs.
Still disabled by default; Thumb doesn't work yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106053 91177308-0d34-0410-b5e6-96231b3b80d8
flag argument to addReg is not the same format as flags attached
to MachineOperand, although both have the same info. I don't
think this actually mattered; the bootstrap failure did not
reproduce on the next run anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106049 91177308-0d34-0410-b5e6-96231b3b80d8
SimpleRegisterCoalescing::JoinIntervals() uses CoalescerPair to determine if a
copy is coalescable, and in very rare cases it can return true where LHS is not
live - the coalescable copy can come from an alias of the physreg in LHS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106021 91177308-0d34-0410-b5e6-96231b3b80d8
combined to an insert_subreg, i.e., where the destination register is larger
than the source. We need to check that the subregs can be composed for that
case in a symmetrical way to the case when the destination is smaller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106004 91177308-0d34-0410-b5e6-96231b3b80d8
Early clobbers defining a virtual register were first alocated to a physreg and
then processed as a physreg EC, spilling the virtreg.
This fixes PR7382.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105998 91177308-0d34-0410-b5e6-96231b3b80d8
Given a copy instruction, CoalescerPair can determine which registers to
coalesce in order to eliminate the copy. It deals with all the subreg fun to
determine a tuple (DstReg, SrcReg, SubIdx) such that:
- SrcReg is a virtual register that will disappear after coalescing.
- DstReg is a virtual or physical register whose live range will be extended.
- SubIdx is 0 when DstReg is a physical register.
- SrcReg can be joined with DstReg:SubIdx.
CoalescerPair::isCoalescable() determines if another copy instruction is
compatible with the same tuple. This fixes some NEON miscompilations where
shuffles are getting coalesced as if they were copies.
The CoalescerPair class will replace a lot of the spaghetti logic in JoinCopy
later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105997 91177308-0d34-0410-b5e6-96231b3b80d8
replacing the overly conservative checks that I had introduced recently to
deal with correctness issues. This makes a pretty noticable difference
in our testcases where reg_sequences are used. I've updated one test to
check that we no longer emit the unnecessary subreg moves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105991 91177308-0d34-0410-b5e6-96231b3b80d8
containing the target address, an input, into an output. I don't
think this actually broke anything on x86 (it does on ARM), but
it's wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105986 91177308-0d34-0410-b5e6-96231b3b80d8
immediate" operands. These functions have so far only been used for VMOV
but they also apply to other NEON instructions with modified immediate
operands. No functional changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105969 91177308-0d34-0410-b5e6-96231b3b80d8
- Rename ExactHazardRecognizer to PostRAHazardRecognizer and move its header to include to allow targets to extend it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105959 91177308-0d34-0410-b5e6-96231b3b80d8
symbols as declarations in the X86 backend. This would manifest
on darwin x86-32 as errors like this with -fvisibility=hidden:
symbol '__ZNSbIcED1Ev' can not be undefined in a subtraction expression
This fixes PR7353.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105954 91177308-0d34-0410-b5e6-96231b3b80d8
clean-up to a catch-all after inlining, take into account that there could be
filter IDs as well. The presence of filters don't mean that the selector catches
anything. It's just metadata information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105872 91177308-0d34-0410-b5e6-96231b3b80d8
i64 and f64 types, but now it also handle Neon vector types, so the f64 result
of VMOVDRR may need to be converted to a Neon type. Radar 8084742.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105845 91177308-0d34-0410-b5e6-96231b3b80d8
the machine instruction representation of the immediate value to be encoded
into an integer with similar fields as the actual VMOV instruction. This makes
things easier for the disassembler, since it can just stuff the bits into the
immediate operand, but harder for the asm printer since it has to decode the
value to be printed. Testcase for the encoding will follow later when MC has
more support for ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105836 91177308-0d34-0410-b5e6-96231b3b80d8
dbg_value immediately follows a sequence of ldr/str instructions that should
be combined into an ldm/stm and is the last instruction in the block, then
combine may end up being skipped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105758 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit of a hack to make inline asm look more like call instructions.
It would be better to produce correct dead flags during isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105749 91177308-0d34-0410-b5e6-96231b3b80d8
%reg1025 = <sext> %reg1024
...
%reg1026 = SUBREG_TO_REG 0, %reg1024, 4
into this:
%reg1025 = <sext> %reg1024
...
%reg1027 = EXTRACT_SUBREG %reg1025, 4
%reg1026 = SUBREG_TO_REG 0, %reg1027, 4
The problem here is that SUBREG_TO_REG is there to assert that an implicit zext
occurs. It doesn't insert a zext instruction. If we allow the EXTRACT_SUBREG
here, it will give us the value after the <sext>, not the original value of
%reg1024 before <sext>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105741 91177308-0d34-0410-b5e6-96231b3b80d8
the same condition, it's important to make sure they are scheduled together
to avoid forming multiple IT blocks. I'm adding a pre-regalloc pass that forms
IT blocks early (by re-scheduling instructions and split basic blocks) to
attempt to fix this. This is not turned on by default since I am not sure this
is the right fix.
Another issue is llvm selects are modeled as two-address conditional moves.
This can be very bad when the copies before the conditional moves are not
coalesced away. Teach IT formation pass to move the copies above the IT block
(when legal) to avoid breaking the IT block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105669 91177308-0d34-0410-b5e6-96231b3b80d8
instruction. Added the 64-bit version "jrcxz" so it is recognized and also
added the checks for incorrect uses of "jcxz" in 64-bit mode and "jrcxz" in
32-bit mode. Still to do is to correctly handle the encoding of the
instruction adding the Address-size override prefix byte, 0x67, when the width
of the count register is not the same as the mode the machine is running in.
Which for example means the encoding of "jecxz" depends if you are assembling
as a 32-bit target or a 64-bit target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105661 91177308-0d34-0410-b5e6-96231b3b80d8
- This can give substantial speedups in the delta process for inputs we can construct dependency information for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105612 91177308-0d34-0410-b5e6-96231b3b80d8
- change isShuffleMaskLegal to show that all shuffles with 32-bit and 64-bit
elements are legal
- the Neon shuffle instructions do not support 64-bit elements, but we were
not checking for that before lowering shuffles to use them
- remove some 64-bit element vduplane patterns that are no longer needed
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105586 91177308-0d34-0410-b5e6-96231b3b80d8
scrounging through SCEVUnknown contents and SCEVNAryExpr operands;
instead just do a simple deterministic comparison of the precomputed
hash data.
Also, since this is more precise, it eliminates the need for the slow
N^2 duplicate detection code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105540 91177308-0d34-0410-b5e6-96231b3b80d8
encapsulation to force the users of these classes to know about the internal
data structure of the Operands structure. It also can lead to errors, like in
the MSIL writer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105539 91177308-0d34-0410-b5e6-96231b3b80d8
In file included from X86InstrInfo.cpp:16:
X86GenInstrInfo.inc:2789: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2790: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2792: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2793: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2808: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2809: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2816: error: integer constant is too large for 'long' type
X86GenInstrInfo.inc:2817: error: integer constant is too large for 'long' type
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105524 91177308-0d34-0410-b5e6-96231b3b80d8
there could be multiple subexpressions within a single expansion which
require insert point adjustment. This fixes PR7306.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105510 91177308-0d34-0410-b5e6-96231b3b80d8
register allocation.
Process all of the clobber lists at the end of the function, marking the
registers as used in MachineRegisterInfo.
This is necessary in case the calls clobber callee-saved registers (sic).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105473 91177308-0d34-0410-b5e6-96231b3b80d8
replace an OpA with a widened OpB, it is possible to get new uses of OpA due to CSE
when recursively updating nodes. Since OpA has been processed, the new uses are
not examined again. The patch checks if this occurred and it it did, updates the
new uses of OpA to use OpB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105453 91177308-0d34-0410-b5e6-96231b3b80d8
VECTOR_SHUFFLEs to REG_SEQUENCE instructions. The standard ISD::BUILD_VECTOR
node corresponds closely to REG_SEQUENCE but I couldn't use it here because
its operands do not get legalized. That is pretty awful, but I guess it
makes sense for other targets. Instead, I have added an ARM-specific version
of BUILD_VECTOR that will have its operands properly legalized.
This fixes the rest of Radar 7872877.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105439 91177308-0d34-0410-b5e6-96231b3b80d8
Check that all the instructions are in the same basic block, that the
EXTRACT_SUBREGs write to the same subregs that are being extracted, and that
the source and destination registers are in the same regclass. Some of
these constraints can be relaxed with a bit more work. Jakob suggested
that the loop that checks for subregs when NewSubIdx != 0 should use the
"nodbg" iterator, so I made that change here, too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105437 91177308-0d34-0410-b5e6-96231b3b80d8
A temporary flag -arm-tail-calls defaults to off,
so there is no functional change by default.
Intrepid users may try this; simple cases work
but there are bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105413 91177308-0d34-0410-b5e6-96231b3b80d8
registers it defines then interfere with an existing preg live range.
For instance, if we had something like these machine instructions:
BB#0
... = imul ... EFLAGS<imp-def,dead>
test ..., EFLAGS<imp-def>
jcc BB#2 EFLAGS<imp-use>
BB#1
... ; fallthrough to BB#2
BB#2
... ; No code that defines EFLAGS
jcc ... EFLAGS<imp-use>
Machine sink will come along, see that imul implicitly defines EFLAGS, but
because it's "dead", it assumes that it can move imul into BB#2. But when it
does, imul's "dead" imp-def of EFLAGS is raised from the dead (a zombie) and
messes up the condition code for the jump (and pretty much anything else which
relies upon it being correct).
The solution is to know which pregs are live going into a basic block. However,
that information isn't calculated at this point. Nor does the LiveVariables pass
take into account non-allocatable physical registers. In lieu of this, we do a
*very* conservative pass through the basic block to determine if a preg is live
coming out of it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105387 91177308-0d34-0410-b5e6-96231b3b80d8
expansion is the same as that used by LegalizeDAG.
The resulting code sucks in terms of performance/codesize on x86-32 for a
64-bit operation; I haven't looked into whether different expansions might be
better in general.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105378 91177308-0d34-0410-b5e6-96231b3b80d8
spills and reloads.
This means that a partial define of a register causes a reload so the other
parts of the register are preserved.
The reload can be prevented by adding an <imp-def> operand for the full
register. This is already done by the coalescer and live interval analysis where
relevant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105369 91177308-0d34-0410-b5e6-96231b3b80d8
register updates.
These operands tell the spiller that the other parts of the partially defined
register are don't-care, and a reload is not necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105361 91177308-0d34-0410-b5e6-96231b3b80d8
instruction defines subregisters.
Any existing subreg indices on the original instruction are preserved or
composed with the new subreg index.
Also substitute multiple operands mentioning the original register by using the
new MachineInstr::substituteRegister() function. This is necessary because there
will soon be <imp-def> operands added to non read-modify-write partial
definitions. This instruction:
%reg1234:foo = FLAP %reg1234<imp-def>
will reMaterialize(%reg3333, bar) like this:
%reg3333:bar-foo = FLAP %reg333:bar<imp-def>
Finally, replace the TargetRegisterInfo pointer argument with a reference to
indicate that it cannot be NULL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105358 91177308-0d34-0410-b5e6-96231b3b80d8
backends and removes the virtual declaration. With that out of the way
I should be able to cleanup one backend at a time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105321 91177308-0d34-0410-b5e6-96231b3b80d8
x86 backend currently doesn't know how to handle them.
This doesn't really fix anything because LegalizeTypes doesn't know how to
handle them either. We do get a better error message, though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105305 91177308-0d34-0410-b5e6-96231b3b80d8
The comment about ordering of subreg indices is no longer true.
This exposed a bug in the new substVirtReg method that is also fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105294 91177308-0d34-0410-b5e6-96231b3b80d8
handle structs passed by value via an extract/insert pair, as a bitcast
won't work on a struct. rdar://7742824
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105280 91177308-0d34-0410-b5e6-96231b3b80d8
the newly created allocas may be used by inlined calls, so these
need to have their tail call flags cleared. Fixes PR7272.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105255 91177308-0d34-0410-b5e6-96231b3b80d8
that are too large. This causes the freebsd bootloader to be too
large apparently.
It's unclear if this should be an -Os or -Oz thing. Thoughts welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105228 91177308-0d34-0410-b5e6-96231b3b80d8
shouldn't have a TargetLoweringInfo member. And FunctionLoweringInfo::set
doesn't needs its EnableFastISel argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105101 91177308-0d34-0410-b5e6-96231b3b80d8
were overspecified when inheriting sub-subregisters, for instance:
R0Q:subreg_even32 = R0Q:subreg_32bit = R0Q:subreg_even:subreg_32bit.
This meant that composeSubRegIndices(subreg_even, subreg_32bit) was ambiguous.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105063 91177308-0d34-0410-b5e6-96231b3b80d8
implementation that is correct for most targets. Tablegen will override where
needed.
Add MachineOperand::subst{Virt,Phys}Reg methods that correctly handle existing
subreg indices when sustituting registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104985 91177308-0d34-0410-b5e6-96231b3b80d8
optimization level.
This only really affects llc for now because both the llvm-gcc and clang front
ends override the default register allocator. I intend to remove that code later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104904 91177308-0d34-0410-b5e6-96231b3b80d8
and change llvm::sys::RunInterruptHandlers to call that function directly
instead of calling SignalHandler, because the rest of SignalHandler
invokes side effects which aren't appropriate, including raising the
signal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104896 91177308-0d34-0410-b5e6-96231b3b80d8
the wrong level. Clients which need to leave the stream open but
which still require the bitcode bits to be on disk should call
flush themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104885 91177308-0d34-0410-b5e6-96231b3b80d8
should fall through to the 'H' case, but instead 'Q' was falling through to 'R'
so that it would do the wrong thing for a big-endian ARM target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104883 91177308-0d34-0410-b5e6-96231b3b80d8
it to be the caller's responsibility to provide a stream in binary
mode. This fixes a layering violation and avoids an outs() call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104878 91177308-0d34-0410-b5e6-96231b3b80d8
This means that our Registers are now ordered R7, R8, R9, R10, R12, ...
Not R1, R10, R11, R12, R2, R3, ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104745 91177308-0d34-0410-b5e6-96231b3b80d8
implementing pop with a linear search for a "best" element. The priority
queue was a neat idea, but in practice the comparison functions depend
on dynamic information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104718 91177308-0d34-0410-b5e6-96231b3b80d8
A Register with subregisters must also provide SubRegIndices for adressing the
subregisters. TableGen automatically inherits indices for sub-subregisters to
minimize typing.
CompositeIndices may be specified for the weirder cases such as the XMM sub_sd
index that returns the same register, and ARM NEON Q registers where both D
subregs have ssub_0 and ssub_1 sub-subregs.
It is now required that all subregisters are named by an index, and a future
patch will also require inherited subregisters to be named. This is necessary to
allow composite subregister indices to be reduced to a single index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104704 91177308-0d34-0410-b5e6-96231b3b80d8
A Register with subregisters must also provide SubRegIndices for adressing the
subregisters. TableGen automatically inherits indices for sub-subregisters to
minimize typing.
CompositeIndices may be specified for the weirder cases such as the XMM sub_sd
index that returns the same register, and ARM NEON Q registers where both D
subregs have ssub_0 and ssub_1 sub-subregs.
It is now required that all subregisters are named by an index, and a future
patch will also require inherited subregisters to be named. This is necessary to
allow composite subregister indices to be reduced to a single index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104654 91177308-0d34-0410-b5e6-96231b3b80d8
If you have a setjmp/longjmp situation, it's possible for stack slot coloring to
reuse a stack slot before it's really dead. For instance, if we have something
like this:
1: y = g;
x = sigsetjmp(env, 0);
switch (x) {
case 1:
/* ... */
goto run;
case 0:
run:
do_run(); /* marked as "no return" */
break;
case 3:
if (...) {
/* ... */
goto run;
}
/* ... */
break;
}
2: g = y;
"y" may be put onto the stack, so the expression "g = y" is relying upon the
fact that the stack slot containing "y" isn't modified between (1) and (2). But
it can be, because of the "no return" calls in there. A longjmp might come back
with 3, modify the stack slot, and then go to case 0. And it's perfectly
acceptable to reuse the stack slot there because there's no CFG flow from case 3
to (2).
The fix is to disable certain optimizations in these situations. Ideally, we'd
disable them for all "returns twice" functions. But we don't support that
attribute. Check for "setjmp" and "sigsetjmp" instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104640 91177308-0d34-0410-b5e6-96231b3b80d8
are st(0). These can be encoded using an opcode for storing in st(0) or using
an opcode for storing in st(i), where i can also be 0. To allow testing with
the darwin assembler and get a matching binary the opcode for storing in st(0)
is now used. To do this the same logical trick is use from the darwin assembler
in converting things like this:
fmul %st(0), %st
into this:
fmul %st(0)
by looking for the second operand being X86::ST0 for specific floating point
mnemonics then removing the second X86::ST0 operand. This also has the add
benefit to allow things like:
fmul %st(1), %st
that llvm-mc did not assemble.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104634 91177308-0d34-0410-b5e6-96231b3b80d8
SubRegIndex instances are now numbered uniquely the same way Register instances
are - in lexicographical order by name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104627 91177308-0d34-0410-b5e6-96231b3b80d8
Mon Ping provided; unfortunately bugpoint failed to
reduce it, but I think it's important to have a test for
this in the suite. 8023512.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104624 91177308-0d34-0410-b5e6-96231b3b80d8
This passes lit tests, but I'll give it a go through the buildbots to smoke out
any remaining places that depend on the old SubRegIndex numbering.
Then I'll remove NumberHack entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104615 91177308-0d34-0410-b5e6-96231b3b80d8
I don't know of any particular reason why that would be important, but
neither can I see any reason to disallow it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104583 91177308-0d34-0410-b5e6-96231b3b80d8