The ARMARM specifies these instructions as unpredictable when storing the
writeback register. This shouldn't affect code generation much since storing a
pointer to itself is quite rare.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129409 91177308-0d34-0410-b5e6-96231b3b80d8
In addition, the base register is not rGPR, but GPR with th exception that:
if n == 15 then UNPREDICTABLE
rdar://problem/9273836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129391 91177308-0d34-0410-b5e6-96231b3b80d8
- Add custom operand matching for imod and iflags.
- Rename SplitMnemonicAndCC to SplitMnemonic since it splits more than CC
from mnemonic.
- While adding ".w" as an operand, don't change "Head" to avoid passing the
wrong mnemonic to ParseOperand.
- Add asm parser tests.
- Add disassembler tests just to make sure it can catch all cps versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125489 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fixed ARM pc adjustment.
2. Fixed dynamic-no-pic codegen
3. CSE of pc-relative load of global addresses.
It's now enabled by default for Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123991 91177308-0d34-0410-b5e6-96231b3b80d8
qadd and qdadd uses "rd, rm, rn", the same applies to the 'sub' variants. This
is described in ARM manuals and matches the encoding used by the gnu assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123975 91177308-0d34-0410-b5e6-96231b3b80d8
TargetInstrInfo:
Change produceSameValue() to take MachineRegisterInfo as an optional argument.
When in SSA form, targets can use it to make more aggressive equality analysis.
Machine LICM:
1. Eliminate isLoadFromConstantMemory, use MI.isInvariantLoad instead.
2. Fix a bug which prevent CSE of instructions which are not re-materializable.
3. Use improved form of produceSameValue.
ARM:
1. Teach ARM produceSameValue to look pass some PIC labels.
2. Look for operands from different loads of different constant pool entries
which have same values.
3. Re-implement PIC GA materialization using movw + movt. Combine the pair with
a "add pc" or "ldr [pc]" to form pseudo instructions. This makes it possible
to re-materialize the instruction, allow machine LICM to hoist the set of
instructions out of the loop and make it possible to CSE them. It's a bit
hacky, but it significantly improve code quality.
4. Some minor bug fixes as well.
With the fixes, using movw + movt to materialize GAs significantly outperform the
load from constantpool method. 186.crafty and 255.vortex improved > 20%, 254.gap
and 176.gcc ~10%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123905 91177308-0d34-0410-b5e6-96231b3b80d8
movw r0, :lower16:(L_foo$non_lazy_ptr-(LPC0_0+4))
movt r0, :upper16:(L_foo$non_lazy_ptr-(LPC0_0+4))
LPC0_0:
add r0, pc, r0
It's not yet enabled by default as some tests are failing. I suspect bugs in
down stream tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123619 91177308-0d34-0410-b5e6-96231b3b80d8
in the right direction. It eliminated some hacks and will unblock codegen
work. But it's far from being done. It doesn't reject illegal expressions,
e.g. (FOO - :lower16:BAR). It also doesn't work in Thumb2 mode at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123369 91177308-0d34-0410-b5e6-96231b3b80d8
as a "long" direct branch. While the mnemonics are the same, they encode the branch offset differently, and
the Darwin assembler appears to prefer the "long" form for direct branches. Thus, in the name of bitwise
equivalence, provide encoding and fixup support for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121710 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb2 encoding to share code with the ARM encoding, which gets use fixup support for free.
It also allows us to fold away at least one codegen-only pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120481 91177308-0d34-0410-b5e6-96231b3b80d8
and xor. The 32-bit move immediates can be hoisted out of loops by machine
LICM but the isel hacks were preventing them.
Instead, let peephole optimization pass recognize registers that are defined by
immediates and the ARM target hook will fold the immediates in.
Other changes include 1) do not fold and / xor into cmp to isel TST / TEQ
instructions if there are multiple uses. This happens when the 'and' is live
out, machine sink would have sinked the computation and that ends up pessimizing
code. The peephole pass would recognize situations where the 'and' can be
toggled to define CPSR and eliminate the comparison anyway.
2) Move peephole pass to after machine LICM, sink, and CSE to avoid blocking
important optimizations.
rdar://8663787, rdar://8241368
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119548 91177308-0d34-0410-b5e6-96231b3b80d8
'db', 'ib', 'da') instead of having that mode as a separate field in the
instruction. It's more convenient for the asm parser and much more readable for
humans.
<rdar://problem/8654088>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119310 91177308-0d34-0410-b5e6-96231b3b80d8
ins/outs list that isn't specified by their asmstring. Previously
the asmmatcher would just force a 0 register into it, which clearly
isn't right. Mark a bunch of ARM instructions that use this as
isCodeGenOnly. Some of them are clearly pseudo instructions (like
t2TBB) others use a weird hasExtraSrcRegAllocReq thing that will
either need to be removed or the asmmatcher will need to be taught
about it (someday).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118119 91177308-0d34-0410-b5e6-96231b3b80d8
and make it a hard error for instructions to not have an asm string.
These instructions should be marked isCodeGenOnly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117861 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of silently ignoring these instructions, emit a hard error and
force the target author to either refactor the target or mark the
instruction 'isCodeGenOnly'.
Mark a few instructions in ARM and MBlaze as isCodeGenOnly the are
doing this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117858 91177308-0d34-0410-b5e6-96231b3b80d8
There were a number of issues to fix up here:
* The "device" argument of the llvm.memory.barrier intrinsic should be
used to distinguish the "Full System" domain from the "Inner Shareable"
domain. It has nothing to do with using DMB vs. DSB instructions.
* The compiler should never need to emit DSB instructions. Remove the
ARMISD::SYNCBARRIER node and also remove the instruction patterns for DSB.
* Merge the separate DMB/DSB instructions for options only used for the
disassembler with the default DMB/DSB instructions. Add the default
"full system" option ARM_MB::SY to the ARM_MB::MemBOpt enum.
* Add a separate ARMISD::MEMBARRIER_MCR node for subtargets that implement
a data memory barrier using the MCR instruction.
* Fix up encodings for these instructions (except MCR).
I also updated the tests and added a few new ones to check for DMB options
that were not currently being exercised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117756 91177308-0d34-0410-b5e6-96231b3b80d8
- For now, loads of [r, r] addressing mode is the same as the
[r, r lsl/lsr/asr #] variants. ARMBaseInstrInfo::getOperandLatency() should
identify the former case and reduce the output latency by 1.
- Also identify [r, r << 2] case. This special form of shifter addressing mode
is "free".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117519 91177308-0d34-0410-b5e6-96231b3b80d8
allow target to correctly compute latency for cases where static scheduling
itineraries isn't sufficient. e.g. variable_ops instructions such as
ARM::ldm.
This also allows target without scheduling itineraries to compute operand
latencies. e.g. X86 can return (approximated) latencies for high latency
instructions such as division.
- Compute operand latencies for those defined by load multiple instructions,
e.g. ldm and those used by store multiple instructions, e.g. stm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115755 91177308-0d34-0410-b5e6-96231b3b80d8
1. Cortex-a9 8-bit and 16-bit loads / stores AGU cycles are 1 cycle longer than 32-bit ones.
2. Cortex-a9 is out-of-order so model all read cycles as cycle 1.
3. Lots of other random fixes for A8 and A9.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115121 91177308-0d34-0410-b5e6-96231b3b80d8
passed the root of the match, even though only a few patterns
actually needed this (one in X86, several in ARM [which should
be refactored anyway], and some in CellSPU that I don't feel
like detangling). Instead of requiring all ComplexPatterns to
take the dead root, have targets opt into getting the root by
putting SDNPWantRoot on the ComplexPattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114471 91177308-0d34-0410-b5e6-96231b3b80d8
int x(int t) {
if (t & 256)
return -26;
return 0;
}
We generate this:
tst.w r0, #256
mvn r0, #25
it eq
moveq r0, #0
while gcc generates this:
ands r0, r0, #256
it ne
mvnne r0, #25
bx lr
Scandalous really!
During ISel time, we can look for this particular pattern. One where we have a
"MOVCC" that uses the flag off of a CMPZ that itself is comparing an AND
instruction to 0. Something like this (greatly simplified):
%r0 = ISD::AND ...
ARMISD::CMPZ %r0, 0 @ sets [CPSR]
%r0 = ARMISD::MOVCC 0, -26 @ reads [CPSR]
All we have to do is convert the "ISD::AND" into an "ARM::ANDS" that sets [CPSR]
when it's zero. The zero value will all ready be in the %r0 register and we only
need to change it if the AND wasn't zero. Easy!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112664 91177308-0d34-0410-b5e6-96231b3b80d8
help relieve register pressure a bit. Recalculating the local address is
almost always going to be better than spilling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112503 91177308-0d34-0410-b5e6-96231b3b80d8
optional modified register (instead of reg0). Along with r112461 it will make
sure that the optional define of CPSR is marked as "def" and will thus mark the
instructions using these classes (t2ANDS*) as setting the 's' flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112462 91177308-0d34-0410-b5e6-96231b3b80d8
comparison with 0. These two pieces of code should give identical results:
rsbs r1, r1, 0
cmp r0, r1
mov r0, #0
it ls
mov r0, #1
and:
cmn r0, r1
mov r0, #0
it ls
mov r0, #1
However, the CMN gives the *opposite* result when r1 is 0. This is because the
carry flag is set in the CMP case but not in the CMN case. In short, the CMP
instruction doesn't perform a truncate of the (logical) NOT of 0 plus the value
of r0 and the carry bit (because the "carry bit" parameter to AddWithCarry is
defined as 1 in this case, the carry flag will always be set when r0 >= 0). The
CMN instruction doesn't perform a NOT of 0 so there is never a "carry" when this
AddWithCarry is performed (because the "carry bit" parameter to AddWithCarry is
defined as 0).
The AddWithCarry in the CMP case seems to be relying upon the identity:
~x + 1 = -x
However when x is 0 and unsigned, this doesn't hold:
x = 0
~x = 0xFFFF FFFF
~x + 1 = 0x1 0000 0000
(-x = 0) != (0x1 0000 0000 = ~x + 1)
Therefore, we should disable *all* versions of CMN, especially when comparing
against zero, until we can limit when the CMN instruction is used (when we know
that the RHS is not 0) or when we have a hardware fix for this.
(See the ARM docs for the "AddWithCarry" pseudo-code.)
This is related to <rdar://problem/7569620>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112176 91177308-0d34-0410-b5e6-96231b3b80d8
printing "lsl #0". This fixes the remaining parts of pr7792. Make
corresponding changes for encoding/decoding these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111251 91177308-0d34-0410-b5e6-96231b3b80d8
memory and synchronization barrier dmb and dsb instructions.
- Change instruction names to something more sensible (matching name of actual
instructions).
- Added tests for memory barrier codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110785 91177308-0d34-0410-b5e6-96231b3b80d8
relatively expensive comparison analyzer on each instruction. Also rename the
comparison analyzer method to something more in line with what it actually does.
This pass is will eventually be folded into the Machine CSE pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110539 91177308-0d34-0410-b5e6-96231b3b80d8
have 4 bits per register in the operand encoding), but have undefined
behavior when the operand value is 13 or 15 (SP and PC, respectively).
The trivial coalescer in linear scan sometimes will merge a copy from
SP into a subsequent instruction which uses the copy, and if that
instruction cannot legally reference SP, we get bad code such as:
mls r0,r9,r0,sp
instead of:
mov r2, sp
mls r0, r9, r0, r2
This patch adds a new register class for use by Thumb2 that excludes
the problematic registers (SP and PC) and is used instead of GPR
for those operands which cannot legally reference PC or SP. The
trivial coalescer explicitly requires that the register class
of the destination for the COPY instruction contain the source
register for the COPY to be considered for coalescing. This prevents
errant instructions like that above.
PR7499
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109842 91177308-0d34-0410-b5e6-96231b3b80d8
and a combine pattern to use it for setting a bit-field to a constant
value. More to come for non-constant stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108570 91177308-0d34-0410-b5e6-96231b3b80d8
in the literal field of an instruction. E.g.,
long long foo(long long a) {
return a - 734439407618LL;
}
rdar://7038284
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108339 91177308-0d34-0410-b5e6-96231b3b80d8
- This fixed a number of bugs in if-converter, tail merging, and post-allocation
scheduler. If-converter now runs branch folding / tail merging first to
maximize if-conversion opportunities.
- Also changed the t2IT instruction slightly. It now defines the ITSTATE
register which is read by instructions in the IT block.
- Added Thumb2 specific hazard recognizer to ensure the scheduler doesn't
change the instruction ordering in the IT block (since IT mask has been
finalized). It also ensures no other instructions can be scheduled between
instructions in the IT block.
This is not yet enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106344 91177308-0d34-0410-b5e6-96231b3b80d8
I don't know of any particular reason why that would be important, but
neither can I see any reason to disallow it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104583 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb2 ADD and SUB instructions: allow RSB instructions be changed to set the
condition codes, and allow RSBS instructions to be predicated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104582 91177308-0d34-0410-b5e6-96231b3b80d8
Fix it by changing the T2I_rbin_s_is multiclass to handle the CPSR
output and 'S' suffix in the same way as T2I_bin_s_irs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104531 91177308-0d34-0410-b5e6-96231b3b80d8
Jordy <snhjordy@gmail.com>.
Followup patches will add some tests and adjust to use Subtarget features
for the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103119 91177308-0d34-0410-b5e6-96231b3b80d8
such that the non-VFP versions have no implicit defs of VFP registers.
If any callee-saved VFP registers are marked as having been defined, the
prologue/epilogue code will try to save and restore them.
Radar 7770432.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100892 91177308-0d34-0410-b5e6-96231b3b80d8
writebacks to the address register. This gets rid of the hack that the
first register on the list was the magic writeback register operand. There
was an implicit constraint that if that operand was not reg0 it had to match
the base register operand. The post-RA scheduler's antidependency breaker
did not understand that constraint and sometimes changed one without the
other. This also fixes Radar 7495976 and should help the verifier work
better for ARM code.
There are now new ld/st instructions explicit writeback operands and explicit
constraints that tie those registers together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98409 91177308-0d34-0410-b5e6-96231b3b80d8
operands into their own PrintMethod, in order not to pollute the printOperand()
impl with disassembly only Imm modifiers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98172 91177308-0d34-0410-b5e6-96231b3b80d8
immediate instructions cannot set the condition codes, so they do not have
the extra cc_out operand. We hit an assertion during tail duplication
because the instruction being duplicated had more operands that expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98001 91177308-0d34-0410-b5e6-96231b3b80d8
Instruction (PLI) for disassembly only.
According to A8.6.120 PLI (immediate, literal), for example, different
instructions are generated for "pli [pc, #0]" and "pli [pc, #-0"]. The
disassembler solves it by mapping -0 (negative zero) to -1, -1 to -2, ..., etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97731 91177308-0d34-0410-b5e6-96231b3b80d8
the opc string passed in, since it's a given from the class inheritance of T2sI.
The fixed the extra 's' in adcss & sbcss when disassembly printing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97582 91177308-0d34-0410-b5e6-96231b3b80d8
o Parallel addition and subtraction, signed/unsigned
o Miscellaneous operations: QADD, QDADD, QSUB, QDSUB
o Unsigned sum of absolute differences [and accumulate]: USAD8, USADA8
o Signed/Unsigned saturate: SSAT, SSAT16, USAT, USAT16
o Signed multiply accumulate long (halfwords): SMLAL<x><y>
o Signed multiply accumulate/subtract [long] (dual): SMLAD[x], SMLALD[X], SMLSD[X], SMLSLD[X]
o Signed dual multiply add/subtract [long]: SMUAD[X], SMUSD[X]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97276 91177308-0d34-0410-b5e6-96231b3b80d8
to have the predicate on the pattern itself instead. Support for the new
ISel. Remove definitions of CarryDefIsUnused and CarryDefIsUsed since they are
no longer used anywhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96384 91177308-0d34-0410-b5e6-96231b3b80d8
cannot be directly interchanged for comparisons against negated values.
Disable the CMN instructions for the time being.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94119 91177308-0d34-0410-b5e6-96231b3b80d8
than doing the same via constpool:
1. Load from constpool costs 3 cycles on A9, movt/movw pair - just 2.
2. Load from constpool might stall up to 300 cycles due to cache miss.
3. Movt/movw does not use load/store unit.
4. Less constpool entries => better compiler performance.
This is only enabled on ELF systems, since darwin does not have needed
relocations (yet).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89720 91177308-0d34-0410-b5e6-96231b3b80d8
load of a GV from constantpool and then add pc. It allows the code sequence to
be rematerializable so it would be hoisted by machine licm.
- Add a late pass to break these pseudo instructions into a number of real
instructions. Also move the code in Thumb2 IT pass that breaks up t2MOVi32imm
to this pass. This is done before post regalloc scheduling to allow the
scheduler to proper schedule these instructions. It also allow them to be
if-converted and shrunk by later passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86304 91177308-0d34-0410-b5e6-96231b3b80d8