constant-offsets of a common base using the generic GEP-walking logic
I added for computing pointer differences in the same situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153419 91177308-0d34-0410-b5e6-96231b3b80d8
inbounds GEPs. This isn't really necessary for simplifying pointer
differences, but I'm planning to re-use the same code to simplify
pointer comparisons where it is necessary. Since real code almost
exclusively uses inbounds GEPs, it doesn't seem worth it to support the
extra complexity of turning it on and off. If anyone would like that
back, feel free to shout. Note that instcombine will still catch any of
these patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153418 91177308-0d34-0410-b5e6-96231b3b80d8
aggressively. There are lots of dire warnings about this being expensive
that seem to predate switching to the TrackingVH-based value remapper
that is automatically updated on RAUW. This makes it easy to not just
prune single-entry PHIs, but to fully simplify PHIs, and to recursively
simplify the newly inlined code to propagate PHINode simplifications.
This introduces a bit of a thorny problem though. We may end up
simplifying a branch condition to a constant when we fold PHINodes, and
we would like to nuke any dead blocks resulting from this so that time
isn't wasted continually analyzing them, but this isn't easy. Deleting
basic blocks *after* they are fully cloned and mapped into the new
function currently requires manually updating the value map. The last
piece of the simplification-during-inlining puzzle will require either
switching to WeakVH mappings or some other piece of refactoring. I've
left a FIXME in the testcase about this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153410 91177308-0d34-0410-b5e6-96231b3b80d8
to instead rely on much more generic and powerful instruction
simplification in the function cloner (and thus inliner).
This teaches the pruning function cloner to use instsimplify rather than
just the constant folder to fold values during cloning. This can
simplify a large number of things that constant folding alone cannot
begin to touch. For example, it will realize that 'or' and 'and'
instructions with certain constant operands actually become constants
regardless of what their other operand is. It also can thread back
through the caller to perform simplifications that are only possible by
looking up a few levels. In particular, GEPs and pointer testing tend to
fold much more heavily with this change.
This should (in some cases) have a positive impact on compile times with
optimizations on because the inliner itself will simply avoid cloning
a great deal of code. It already attempted to prune proven-dead code,
but now it will be use the stronger simplifications to prove more code
dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153403 91177308-0d34-0410-b5e6-96231b3b80d8
fire if anything ever invalidates the assumption of a terminator
instruction being unchanged throughout the routine.
I've convinced myself that the current definition of simplification
precludes such a transformation, so I think getting some asserts
coverage that we don't violate this agreement is sufficient to make this
code safe for the foreseeable future.
Comments to the contrary or other suggestions are of course welcome. =]
The bots are now happy with this code though, so it appears the bug here
has indeed been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153401 91177308-0d34-0410-b5e6-96231b3b80d8
list. This is a bad idea. ;] I'm hopeful this is the bug that's showing
up with the MSVC bots, but we'll see.
It is definitely unnecessary. InstSimplify won't do anything to
a terminator instruction, we don't need to even include it in the
iteration range. We can also skip the now dead terminator check,
although I've made it an assert to help document that this is an
important invariant.
I'm still a bit queasy about this because there is an implicit
assumption that the terminator instruction cannot be RAUW'ed by the
simplification code. While that appears to be true at the moment, I see
no guarantee that would ensure it remains true in the future. I'm
looking at the cleanest way to solve that...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153399 91177308-0d34-0410-b5e6-96231b3b80d8
spotted by inspection, and I've crafted no test case that triggers it on
my machine, but some of the windows builders are hitting what looks like
memory corruption, so *something* is amiss here.
This patch takes a more generalized approach to eliminating
double-visits. Imagine code such as:
%x = ...
%y = add %x, 1
%z = add %x, %y
You can imagine that if we simplify %x, we would add %y and %z to the
list. If the use-chain order happens to cause us to add them in reverse
order, we could pull %y off first, and simplify it, adding %z to the
list. We now have %z on the list twice, and will reference it after it
is deleted.
Currently, all my test cases happen to not trigger this, likely due to
the use-chain ordering, but there seems no guarantee that such
a situation could not occur, so we should handle it correctly.
Again, if anyone knows how to craft a testcase that actually triggers
this, please let me know.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153397 91177308-0d34-0410-b5e6-96231b3b80d8
worklist. This can happen in theory when an instruction uses itself,
such as a PHI node. This was spotted by inspection, and unfortunately
I've not been able to come up with a test case that would trigger it. If
anyone has ideas, let me know...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153396 91177308-0d34-0410-b5e6-96231b3b80d8
bit simpler by handling a common case explicitly.
Also, refactor the implementation to use a worklist based walk of the
recursive users, rather than trying to use value handles to detect and
recover from RAUWs during the recursive descent. This fixes a very
subtle bug in the previous implementation where degenerate control flow
structures could cause mutually recursive instructions (PHI nodes) to
collapse in just such a way that From became equal to To after some
amount of recursion. At that point, we hit the inf-loop that the assert
at the top attempted to guard against. This problem is defined away when
not using value handles in this manner. There are lots of comments
claiming that the WeakVH will protect against just this sort of error,
but they're not accurate about the actual implementation of WeakVHs,
which do still track RAUWs.
I don't have any test case for the bug this fixes because it requires
running the recursive simplification on unreachable phi nodes. I've no
way to either run this or easily write an input that triggers it. It was
found when using instruction simplification inside the inliner when
running over the nightly test-suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153393 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC64 SVR4 ABI requires integer stack arguments, and thus the var. args., that
are smaller than 64 bits be zero extended to 64 bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153373 91177308-0d34-0410-b5e6-96231b3b80d8
Code such as:
%vreg100 = setcc %vreg10, -1, SETNE
brcond %vreg10, %tgt
was being incorrectly morphed into
%vreg100 = and %vreg10, 1
brcond %vreg10, %tgt
where the 'and' instruction could be eliminated since
such logic is on 1-bit types in the PTX back-end, leaving
us with just:
brcond %vreg10, %tgt
which essentially gives us inverted branch conditions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153364 91177308-0d34-0410-b5e6-96231b3b80d8
destination module, but one of them isn't used in the destination module. If
another module comes along and the uses the unused type, there could be type
conflicts when the modules are finally linked together. (This happened when
building LLVM.)
The test that was reduced is:
Module A:
%Z = type { %A }
%A = type { %B.1, [7 x x86_fp80] }
%B.1 = type { %C }
%C = type { i8* }
declare void @func_x(%C*, i64, i64)
declare void @func_z(%Z* nocapture)
Module B:
%B = type { %C.1 }
%C.1 = type { i8* }
%A.2 = type { %B.3, [5 x x86_fp80] }
%B.3 = type { %C.1 }
define void @func_z() {
%x = alloca %A.2, align 16
%y = getelementptr inbounds %A.2* %x, i64 0, i32 0, i32 0
call void @func_x(%C.1* %y, i64 37, i64 927) nounwind
ret void
}
declare void @func_x(%C.1*, i64, i64)
declare void @func_y(%B* nocapture)
(Unfortunately, this test doesn't fail under llvm-link, only during an LTO
linking.) The '%C' and '%C.1' clash. The destination module gets the '%C'
declaration. When merging Module B, it looks at the '%C.1' subtype of the '%B'
structure. It adds that in, because that's cool. And when '%B.3' is processed,
it uses the '%C.1'. But the '%B' has used '%C' and we prefer to use '%C'. So the
'@func_x' type is changed to 'void (%C*, i64, i64)', but the type of '%x' in
'@func_z' remains '%A.2'. The GEP resolves to a '%C.1', which conflicts with the
'@func_x' signature.
We can resolve this situation by making sure that the type is used in the
destination before saying that it should be used in the module being merged in.
With this fix, LLVM and Clang both compile under LTO.
<rdar://problem/10913281>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153351 91177308-0d34-0410-b5e6-96231b3b80d8
same basic block, and it's not safe to insert code in the successor
blocks if the edges are critical edges. Splitting those edges is
possible, but undesirable, especially on the unwind side. Instead,
make the bottom-up code motion to consider invokes to be part of
their successor blocks, rather than part of their parent blocks, so
that it doesn't push code past them and onto the edges. This fixes
PR12307.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153343 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary if the client wants to be able to mutate TargetOptions (for example, fast FP math mode) after the initial creation of the ExecutionEngine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153342 91177308-0d34-0410-b5e6-96231b3b80d8
dominated by Root, check that B is available throughout the scope. This
is obviously true (famous last words?) given the current logic, but the
check may be helpful if more complicated reasoning is added one day.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153323 91177308-0d34-0410-b5e6-96231b3b80d8
the PassManager annoying and should be reimplemented as a decorator
on top of existing passes (as should the timing data).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153305 91177308-0d34-0410-b5e6-96231b3b80d8
few comments where none existed before. Also change a function's name to match
the current coding standard.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153276 91177308-0d34-0410-b5e6-96231b3b80d8
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153241 91177308-0d34-0410-b5e6-96231b3b80d8
execution-time regression for nsieve-bits on the ARMv7 -O0 -g nightly tester.
This may also improve compile-time on architectures that would otherwise
generate a libcall for urem (e.g., ARM) or fall back to the DAG selector.
rdar://10810716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153230 91177308-0d34-0410-b5e6-96231b3b80d8
1. Declare a virtual function getPointerToNamedFunction() in JITMemoryManager
2. Move the implementation of getPointerToNamedFunction() form JIT/MCJIT to DefaultJITMemoryManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153205 91177308-0d34-0410-b5e6-96231b3b80d8
Type legalization can zero-extend the elements of the build_vector node, so,
for example, we may have an <8 x i8> with i32 elements of value 255. That
should return 'true' for the vector being all ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153203 91177308-0d34-0410-b5e6-96231b3b80d8
not attched to a basic block or function. There are conservatively
correct answers in these cases, and this makes the analysis more useful
in contexts where we have a partially formed bit of IR.
I don't have any way to test this directly... suggestions welcome here,
but I'm not seeing anything sadly. I only found this using a subsequent
patch to the inliner which runs instsimplify on partially inlined
instructions, and even then only on a quite large program. I never got
a reasonable testcase out of it, and anything I do get is likely to be
quite fragile due to requiring an interaction of two different passes,
and the only result being a segfault if it goes wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153176 91177308-0d34-0410-b5e6-96231b3b80d8
These changes allow us to compile big endian from the command line for 32 bit
Mips targets. This patch will result in code and data actually being produced
in the correct endianess.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153153 91177308-0d34-0410-b5e6-96231b3b80d8
relocations (i.e., pieces of data whose addresses
are referred to elsewhere in the binary image) and
update the references when the section containing
the relocations moves. The way this works is that
there is a map from section IDs to lists of
relocations.
Because the relocations are associated with the
section containing the data being referred to, they
are updated only when the target moves. However,
many data references are relative and also depend
on the location of the referrer.
To solve this problem, I introduced a new data
structure, Referrer, which simply contains the
section being referred to and the index of the
relocation in that section. These referrers are
associated with the source containing the
reference that needs to be updated, so now
regardless of which end of the relocation moves,
the relocation will now be updated correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153147 91177308-0d34-0410-b5e6-96231b3b80d8
Do not call SplitBlockPredecessors on a loop preheader when one of the
predecessors is an indirectbr. Otherwise, you will hit this assert:
!isa<IndirectBrInst>(Preds[i]->getTerminator()) && "Cannot split an edge from an IndirectBrInst"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153134 91177308-0d34-0410-b5e6-96231b3b80d8
instead of skipping the current loop.
My prior fix was incomplete because of an overzealous compile-time optimization:
Better fix for: <rdar://problem/11049788> Segmentation fault: 11 in LoopStrengthReduce
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153131 91177308-0d34-0410-b5e6-96231b3b80d8
ARMBaseRegisterInfo::canRealignStack was checking for variable-sized objects
but not for stack adjustments around calls. Use hasReservedCallFrame() to
check for both. The hasBasePointer function was already correctly checking
both conditions, so the effect of this was that a base pointer would be used
without checking whether the base pointer register could be reserved. I don't
have a small testcase for this.
<rdar://problem/11075906>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153110 91177308-0d34-0410-b5e6-96231b3b80d8
ARMFrameLowering::hasReservedCallFrame is already checking for variable
sized objects, so there's no point in checking it twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153109 91177308-0d34-0410-b5e6-96231b3b80d8
This results in things such as
vmovups 16(%rdi), %xmm0
vinsertf128 $1, %xmm0, %ymm0, %ymm0
to be combined to
vinsertf128 $1, 16(%rdi), %ymm0, %ymm0
rdar://11076953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153092 91177308-0d34-0410-b5e6-96231b3b80d8
i128). In that case, we may not be able to print out the MCExpr as an
expression. For instance, we could have an MCExpr like this:
0xBEEF0000BEEF0000 | (0xBEEF0000BEEF0000 << 64)
The MCExpr printer handles sizes up to 64-bits, but this expression would
require 128-bits. In this situation, try to evaluate the constant expression and
emit that as the value into 64-bit chunks.
<rdar://problem/11070338>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153081 91177308-0d34-0410-b5e6-96231b3b80d8
a variable. The previous code would break the debug info changing
code invariant. This will regress debug info for arguments where
we elide the alloca created.
Fixes rdar://11066468
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153074 91177308-0d34-0410-b5e6-96231b3b80d8
instructions have been scheduled. Handy for tracking down scheduler bugs, or
bugs exposed by scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153045 91177308-0d34-0410-b5e6-96231b3b80d8
X86InstrCompiler.td.
It also adds –mcpu-generic to the legalize-shift-64.ll test so the test
will pass if run on an Intel Atom CPU, which would otherwise
produce an instruction schedule which differs from that which the test expects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153033 91177308-0d34-0410-b5e6-96231b3b80d8
overflow checking multiply intrinsic as well.
Add a test for this, updating the test from grep to FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153028 91177308-0d34-0410-b5e6-96231b3b80d8
fast-isel before emitting code. If the program bails after code was emitted,
then it could lead to the stack being adjusted more than once (two
CALLSEQ_BEGINs emitted) but being adjuste back only once after the call. This
leads to general badness and gnashing of teeth.
<rdar://problem/11050630>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152959 91177308-0d34-0410-b5e6-96231b3b80d8
It's not a good style idea, as the registers will be laid down in memory in
numerical order, not the order they're in the list, but it's legal. vldm/vstm
are stricter.
rdar://11064740
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152943 91177308-0d34-0410-b5e6-96231b3b80d8
alignment. If that's the case, then we want to make sure that we don't increase
the alignment of the store instruction. Because if we increase it to be "more
aligned" than the pointer, code-gen may use instructions which require a greater
alignment than the pointer guarantees.
<rdar://problem/11043589>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152907 91177308-0d34-0410-b5e6-96231b3b80d8
It was added in 2007 as the first cut at supporting no-inline
attributes, but we didn't have function attributes of any form at the
time. However, it was added without any mention in the LangRef or other
documentation.
Later on, in 2008, Devang added function notes for 'inline=never' and
then turned them into proper function attributes. From that point
onward, as far as I can tell, the world moved on, and no one has touched
'llvm.noinline' in any meaningful way since.
It's time has now come. We have had better mechanisms for doing this for
a long time, all the frontends I'm aware of use them, and this is just
holding back progress. Given that it was never a documented feature of
the IR, I've provided no auto-upgrade support. If people know of real,
in-the-wild bitcode that relies on this, yell at me and I'll add it, but
I *seriously* doubt anyone cares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152904 91177308-0d34-0410-b5e6-96231b3b80d8
directly query the function information which this set was representing.
This simplifies the interface of the inline cost analysis, and makes the
always-inline pass significantly more efficient.
Previously, always-inline would first make a single set of every
function in the module *except* those marked with the always-inline
attribute. It would then query this set at every call site to see if the
function was a member of the set, and if so, refuse to inline it. This
is quite wasteful. Instead, simply check the function attribute directly
when looking at the callsite.
The normal inliner also had similar redundancy. It added every function
in the module with the noinline attribute to its set to ignore, even
though inside the cost analysis function we *already tested* the
noinline attribute and produced the same result.
The only tricky part of removing this is that we have to be able to
correctly remove only the functions inlined by the always-inline pass
when finalizing, which requires a bit of a hack. Still, much less of
a hack than the set of all non-always-inline functions was. While I was
touching this function, I switched a heavy-weight set to a vector with
sort+unique. The algorithm already had a two-phase insert and removal
pattern, we were just needlessly paying the uniquing cost on every
insert.
This probably speeds up some compiles by a small amount (-O0 compiles
with lots of always-inline, so potentially heavy libc++ users), but I've
not tried to measure it.
I believe there is no functional change here, but yell if you spot one.
None are intended.
Finally, the direction this is going in is to greatly simplify the
inline cost query interface so that we can replace its implementation
with a much more clever one. Along the way, all the APIs get simplified,
so it seems incrementally good.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152903 91177308-0d34-0410-b5e6-96231b3b80d8
analysis implementation. The header was already separated. Also cleanup
all the comments in the header to follow a nice modern doxygen form.
There is still plenty of cruft here, but some of that will fall out in
subsequent refactorings and this was an easy step in the right
direction. No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152898 91177308-0d34-0410-b5e6-96231b3b80d8
These edges are not really necessary, but it is consistent with the
way we currently create physreg edges. Scheduler heuristics that
expect a DAG edge to the block terminator could benefit from this
change. Although in the future I hope we have a better mechanism for
modeling latency across scheduling regions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152895 91177308-0d34-0410-b5e6-96231b3b80d8
Only record IVUsers that are dominated by simplified loop
headers. Otherwise SCEVExpander will crash while looking for a
preheader.
I previously tried to work around this in LSR itself, but that was
insufficient. This way, LSR can continue to run if some uses are not
in simple loops, as long as we don't attempt to analyze those users.
Fixes <rdar://problem/11049788> Segmentation fault: 11 in LoopStrengthReduce
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152892 91177308-0d34-0410-b5e6-96231b3b80d8
on our internal nightly testers. So, basically revert r152486 again.
Abbreviated original commit message:
Implement a more intelligent way of spilling uses across an invoke boundary.
It looks as if Chander's inlining work, r152737, exposed an issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152887 91177308-0d34-0410-b5e6-96231b3b80d8
It caused MSP430DAGToDAGISel::SelectIndexedBinOp() to be miscompiled.
When two ReplaceUses()'s are expanded as inline, vtable in base class is stored to latter (ISelUpdater)ISU.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152877 91177308-0d34-0410-b5e6-96231b3b80d8
theoretical fix since it only matters for types with >= 2^63 bits (!) and also
only matters if pointers have more than 64 bits, which is not supported anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152831 91177308-0d34-0410-b5e6-96231b3b80d8
This needs a test, but it will take some time to figure
out the best way to get an input that will produce > 2^16 relocs.
Patch by Graydon Hoare!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152787 91177308-0d34-0410-b5e6-96231b3b80d8
out the DW_AT_name. Older gdbs unfortunately still use it to
disambiguate member functions in templated classes (gdb.cp/templates.exp).
rdar://11043421 (which is now deferred for a bit)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152782 91177308-0d34-0410-b5e6-96231b3b80d8
changed since. No one was using it. It is yet another consumer of the
InlineCost interface that I'd like to change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152769 91177308-0d34-0410-b5e6-96231b3b80d8
essentially sorting the pair's arguments. I'd love to actually call sort
here, but I'm just not that crazy. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152764 91177308-0d34-0410-b5e6-96231b3b80d8
This appears to not be the case with dragonegg at least in some
contexts. Hopefully will fix the bootstrap assert failure there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152763 91177308-0d34-0410-b5e6-96231b3b80d8
This results in things such as
vmovaps -96(%rbx), %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
to be combined to
vinsertf128 $1, -96(%rbx), %ymm0, %ymm0
rdar://10643481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152762 91177308-0d34-0410-b5e6-96231b3b80d8
correlated pairs of pointer arguments at the callsite. This is designed
to recognize the common C++ idiom of begin/end pointer pairs when the
end pointer is a constant offset from the begin pointer. With the
C-based idiom of a pointer and size, the inline cost saw the constant
size calculation, and this provides the same level of information for
begin/end pairs.
In order to propagate this information we have to search for candidate
operations on a pair of pointer function arguments (or derived from
them) which would be simplified if the pointers had a known constant
offset. Then the callsite analysis looks for such pointer pairs in the
argument list, and applies the appropriate bonus.
This helps LLVM detect that half of bounds-checked STL algorithms
(such as hash_combine_range, and some hybrid sort implementations)
disappear when inlined with a constant size input. However, it's not
a complete fix due the inaccuracy of our cost metric for constants in
general. I'm looking into that next.
Benchmarks showed no significant code size change, and very minor
performance changes. However, specific code such as hashing is showing
significantly cleaner inlining decisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152752 91177308-0d34-0410-b5e6-96231b3b80d8
which are small enough to themselves be inlined. Delaying in this manner
can be harmful if the function is inelligible for inlining in some (or
many) contexts as it pessimizes the code of the function itself in the
event that inlining does not eventually happen.
Previously the check was written to only do this delaying of inlining
for static functions in the hope that they could be entirely deleted and
in the knowledge that all callers of static functions will have the
opportunity to inline if it is in fact profitable. However, with C++ we
get two other important sources of functions where the definition is
always available for inlining: inline functions and templated functions.
This patch generalizes the inliner to allow linkonce-ODR (the linkage
such C++ routines receive) to also qualify for this delay-based
inlining.
Benchmarking across a range of large real-world applications shows
roughly 2% size increase across the board, but an average speedup of
about 0.5%. Some benhcmarks improved over 2%, and the 'clang' binary
itself (when bootstrapped with this feature) shows a 1% -O0 performance
improvement when run over all Sema, Lex, and Parse source code smashed
into a single file. A clean re-build of Clang+LLVM with a bootstrapped
Clang shows approximately 2% improvement, but that measurement is often
noisy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152737 91177308-0d34-0410-b5e6-96231b3b80d8
There were cases where a value could be used and it's both crossing an invoke
and NOT crossing an invoke. This could happen in the landing pads. In that case,
we will demote the value to the stack like we did before.
<rdar://problem/10609139>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152705 91177308-0d34-0410-b5e6-96231b3b80d8
expensive "getFirstTerminator" call. This reduces the time of compilation in
PR12258 from >10 minutes to < 10 seconds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152704 91177308-0d34-0410-b5e6-96231b3b80d8
New flags: -misched-topdown, -misched-bottomup. They can be used with
the default scheduler or with -misched=shuffle. Without either
topdown/bottomup flag -misched=shuffle now alternates scheduling
direction.
LiveIntervals update is unimplemented with bottom-up scheduling, so
only -misched-topdown currently works.
Capped the ScheduleDAG hierarchy with a concrete ScheduleDAGMI class.
ScheduleDAGMI is aware of the top and bottom of the unscheduled zone
within the current region. Scheduling policy can be plugged into
the ScheduleDAGMI driver by implementing MachineSchedStrategy.
ConvergingScheduler is now the default scheduling algorithm.
It exercises the new driver but still does no reordering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152700 91177308-0d34-0410-b5e6-96231b3b80d8
output (we're emitting a specification already and the information
isn't changing).
Saves 1% on the debug information for a build of llvm.
Fixes rdar://11043421
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152697 91177308-0d34-0410-b5e6-96231b3b80d8
(i16 load $addr+c*sizeof(i16)) and replace uses of (i32 vextract) with the
i16 load. It should issue an extload instead: (i32 extload $addr+c*sizeof(i16)).
rdar://11035895
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152675 91177308-0d34-0410-b5e6-96231b3b80d8
instruction's destination operand like it does for the source operand.
Also fix a typo in the comment for X86AsmParser::isSrcOp().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152654 91177308-0d34-0410-b5e6-96231b3b80d8
take a TargetLibraryInfo parameter. Internally, rather than passing TD, TLI
and DT parameters around all over the place, introduce a struct for holding
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152623 91177308-0d34-0410-b5e6-96231b3b80d8
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152620 91177308-0d34-0410-b5e6-96231b3b80d8
offset accumulation to use a boring APInt instead of ConstantExprs.
I didn't go all the way to an 'int64_t' because I wanted APInt to handle
any magic required to properly wrap the arithmetic when the pointer
width is <64 bits. If there is a significant penalty from using APInt
here, first off WTF, and secondly let me know and I'll do the math by
hand.
I've left one layer still operating w/ ConstantExpr because it makes the
interface quite a bit simpler, and that one isn't iterative so has much
lower cost.
I suppose this may potentially speed up some strang compilation
situations, but I don't really expect much. It should have no functional
impact either way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152590 91177308-0d34-0410-b5e6-96231b3b80d8
candidate set for subsequent inlining, try to simplify the arguments to
the inner call site now that inlining has been performed.
The goal here is to propagate and fold constants through deeply nested
call chains. Without doing this, we loose the inliner bonus that should
be applied because the arguments don't match the exact pattern the cost
estimator uses.
Reviewed on IRC by Benjamin Kramer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152556 91177308-0d34-0410-b5e6-96231b3b80d8
Typically instcombine has handled this, but pointer differences show up
in several contexts where we would like to get constant folding, and
cannot afford to run instcombine. Specifically, I'm working on improving
the constant folding of arguments used in inline cost analysis with
instsimplify.
Doing this in instsimplify implies some algorithm changes. We have to
handle multiple layers of all-constant GEPs because instsimplify cannot
fold them into a single GEP the way instcombine can. Also, we're only
interested in all-constant GEPs. The result is that this doesn't really
replace the instcombine logic, it's just complimentary and focused on
constant folding.
Reviewed on IRC by Benjamin Kramer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152555 91177308-0d34-0410-b5e6-96231b3b80d8
Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152532 91177308-0d34-0410-b5e6-96231b3b80d8
The 'CmpInst::isFalseWhenEqual' function returns 'false' for values other than
simply equality. For instance, it returns 'false' for <= or >=. This isn't the
correct behavior for this transformation, which is checking for strict equality
and non-equality. It was causing the gcc.c-torture/execute/frame-address.c test
to fail because it would completely (and incorrectly) optimize a whole function
into a 'ret i32 0'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152497 91177308-0d34-0410-b5e6-96231b3b80d8
a common collection of methods on Value, and share their implementation.
We had two variations in two different places already, and I need the
third variation for inline cost estimation.
Reviewed by Duncan Sands on IRC, but further comments here welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152490 91177308-0d34-0410-b5e6-96231b3b80d8
The old way of determine when and where to spill a value that was used inside of
a landing pad resulted in spilling that value everywhere and not just at the
invoke edge.
This algorithm determines which values are used within a landing pad. It then
spills those values before the invoke and reloads them before the uses. This
should prevent excessive spilling in many cases, e.g. inside of loops.
<rdar://problem/10609139>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152486 91177308-0d34-0410-b5e6-96231b3b80d8
traversal, consider nodes for which the only successors are backedges
which the traversal is ignoring to be exit nodes. This fixes a problem
where the bottom-up traversal was failing to visit split blocks along
split loop backedges. This fixes rdar://10989035.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152421 91177308-0d34-0410-b5e6-96231b3b80d8
negative switch cases if the branch condition is known to be positive.
Inspired by a recent improvement to GCC's VRP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152405 91177308-0d34-0410-b5e6-96231b3b80d8
introduced. Specifically, there are cost reductions for all
constant-operand icmp instructions against an alloca, regardless of
whether the alloca will in fact be elligible for SROA. That means we
don't want to abort the icmp reduction computation when we abort the
SROA reduction computation. That in turn frees us from the need to keep
a separate worklist and defer the ICmp calculations.
Use this new-found freedom and some judicious function boundaries to
factor the innards of computing the cost factor of any given instruction
out of the loop over the instructions and into static helper functions.
This greatly simplifies the code, and hopefully makes it more clear what
is happening here.
Reviewed by Eric Christopher. There is some concern that we'd like to
ensure this doesn't get out of hand, and I plan to benchmark the effects
of this change over the next few days along with some further fixes to
the inline cost.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152368 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message from r147481:
DAGCombine for transforming 128->256 casts into a vmovaps, rather
then a vxorps + vinsertf128 pair if the original vector came from a load.
Fix:
Unaligned loads need to generate a vmovups.
rdar://10974078
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152366 91177308-0d34-0410-b5e6-96231b3b80d8
buildbots. Original commit message:
[ADT] Change the trivial FoldingSetNodeID::Add* methods to be inline, reapplied
with a fix for the longstanding over-read of 32-bit pointer values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152304 91177308-0d34-0410-b5e6-96231b3b80d8
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152297 91177308-0d34-0410-b5e6-96231b3b80d8
For example, this pattern
(select (setcc lhs, rhs, cc), true, 0)
is transformed to this one:
(select (setcc lhs, rhs, inverse(cc)), 0, true)
This enables MipsDAGToDAGISel::ReplaceUsesWithZeroReg (added in r152280) to
replace 0 with $zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152285 91177308-0d34-0410-b5e6-96231b3b80d8
analysis to be methods on the cost analysis's function info object
instead of the code metrics object. These really are just users of the
code metrics, they're building the information for the function's
analysis.
This is the first step of growing the amount of information we collect
about a function in order to cope with pair-wise simplifications due to
allocas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152283 91177308-0d34-0410-b5e6-96231b3b80d8
For example, the first instruction in the code below can be eliminated if the
use of $vr0 is replaced with $zero:
addiu $vr0, $zero, 0
add $vr2, $vr1, $vr0
add $vr2, $vr1, $zero
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152280 91177308-0d34-0410-b5e6-96231b3b80d8
Allow targets to provide their own schedulers (subclass of
ScheduleDAGInstrs) to the misched pass. Select schedulers using
-misched=...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152278 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM code generator makes aggressive assumptions about the encodings
being selected for branches which MCRelaxAll invalidates.
rdar://11006355
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152268 91177308-0d34-0410-b5e6-96231b3b80d8
code that will be relocated into another memory space.
Now when relocations are resolved, the address of
the relocation in the host memory (where the JIT is)
is passed separately from the address that the
relocation will be at in the target memory (where
the code will run).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152264 91177308-0d34-0410-b5e6-96231b3b80d8
ScheduleDAGInstrs will be the main interface for MI-level
schedulers. Make sure it's readable: one page of protected fields, one
page of public methids.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152258 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a build failure in webkit. Copying all elements shouldn't be
necessary, I'll look out for a better fix soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152252 91177308-0d34-0410-b5e6-96231b3b80d8
condition flags to CPSR. This allows us to simplify SelectCmp.
Patch by Zonr Chang <zonr.xchg@gmail.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152243 91177308-0d34-0410-b5e6-96231b3b80d8
This one is particularly annoying because the hashing algorithm is
highly specialized, with a strange "equivalence" definition that subsets
the fields involved.
Still, this looks at the exact same set of data as the old code, but
without bitwise or-ing over parts of it and other mixing badness. No
functionality changed here. I've left a substantial fixme about the fact
that there is a cleaner and more principled way to do this, but it
requires making the equality definition actual stable for particular
types...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152218 91177308-0d34-0410-b5e6-96231b3b80d8
the DebugLoc information can be maintained throughout by grabbing the DebugLoc
before the RemoveBranch and then passing the result to the InsertBranch.
Patch by Andrew Stanford-Jason!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152212 91177308-0d34-0410-b5e6-96231b3b80d8
ScheduleDAG is responsible for the DAG: SUnits and SDeps. It provides target hooks for latency computation.
ScheduleDAGInstrs extends ScheduleDAG and defines the current scheduling region in terms of MachineInstr iterators. It has access to the target's scheduling itinerary data. ScheduleDAGInstrs provides the logic for building the ScheduleDAG for the sequence of MachineInstrs in the current region. Target's can implement highly custom schedulers by extending this class.
ScheduleDAGPostRATDList provides the driver and diagnostics for current postRA scheduling. It maintains a current Sequence of scheduled machine instructions and logic for splicing them into the block. During scheduling, it uses the ScheduleHazardRecognizer provided by the target.
Specific changes:
- Removed driver code from ScheduleDAG. clearDAG is the only interface needed.
- Added enterRegion/exitRegion hooks to ScheduleDAGInstrs to delimit the scope of each scheduling region and associated DAG. They should be used to setup and cleanup any region-specific state in addition to the DAG itself. This is necessary because we reuse the same ScheduleDAG object for the entire function. The target may extend these hooks to do things at regions boundaries, like bundle terminators. The hooks are called even if we decide not to schedule the region. So all instructions in a block are "covered" by these calls.
- Added ScheduleDAGInstrs::begin()/end() public API.
- Moved Sequence into the driver layer, which is specific to the scheduling algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152208 91177308-0d34-0410-b5e6-96231b3b80d8
to hash_combine. One of the interfaces could already do this, and the
other can just use a small buffer. This is a much more efficient way to
use the hash_combine interface, although I don't have any particular
benchmark where this code was hot, so I can't measure much of an impact.
It at least doesn't slow anything down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152200 91177308-0d34-0410-b5e6-96231b3b80d8
"is sized". This prevents every query to isSized() from recursing over
every sub-type of a struct type. This could get *very* slow for
extremely deep nesting of structs, as in 177.mesa.
This change is a 45% speedup for 'opt -O2' of 177.mesa.linked.bc, and
likely a significant speedup for other cases as well. It even impacts
-O0 cases because so many part of the code try to check whether a type
is sized.
Thanks for the review from Nick Lewycky and Benjamin Kramer on IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152197 91177308-0d34-0410-b5e6-96231b3b80d8
This currently assumes that both sets have the same SmallSize to keep the implementation simple,
a limitation that can be lifted if someone cares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152143 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction only writes sub-registers, it is still necessary to
add an <imp-def> operand for the super-register. When reloading into a
virtual register, rewriting will add the operand, but when loading
directly into a virtual register, the <imp-def> operand is still
necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152095 91177308-0d34-0410-b5e6-96231b3b80d8
The fpscr register contains both flags (set by FP operations/comparisons) and
control bits. The control bits (FPSCR) should be reserved, since they're always
available and needn't be defined before use. The flag bits (FPSCR_NZCV) should
like to be unreserved so they can be hoisted by MachineCSE. This fixes PR12165.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152076 91177308-0d34-0410-b5e6-96231b3b80d8
With the new composite physical registers to represent arbitrary pairs
of DPR registers, we don't need the pseudo-registers anymore. Get rid of
a bunch of them that use DPR register pairs and just use the real
instructions directly instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152045 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, remove the magic number when checking to see if the copy has a
glue operand and simplify the checking logic.
rdar://10930395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152041 91177308-0d34-0410-b5e6-96231b3b80d8
In this update:
- I assumed neon2 does not imply vfpv4, but neon and vfpv4 imply neon2.
- I kept setting .fpu=neon-vfpv4 code attribute because that is what the
assembler understands.
Patch by Ana Pazos <apazos@codeaurora.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152036 91177308-0d34-0410-b5e6-96231b3b80d8
This implicitly fixes a nasty bug in the GVN hashing (that thankfully
could only manifest as a performance bug): actually include the opcode
in the hash. The old code started the hash off with the opcode, but then
overwrote it with the type pointer.
Since this is likely to be pretty hot (GVN being already pretty
expensive) I've included a micro-optimization to just not bother with
the varargs hashing if they aren't present. I can't measure any change
in GVN performance due to this, even with a big test case like Duncan's
sqlite one. Everything I see is in the noise floor. That said, this
closes a loop hole for a potential scaling problem due to collisions if
the opcode were the differentiating aspect of the expression.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152025 91177308-0d34-0410-b5e6-96231b3b80d8
hashing infrastructure. I wonder why we don't just use StringMap here,
and I may revisit the issue if I have time, but for now I'm just trying
to consolidate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152023 91177308-0d34-0410-b5e6-96231b3b80d8
The first def of a virtual register cannot also read the register.
Assert on such bad machine code instead of trying to fix it.
TwoAddressInstructionPass should never create code like that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152010 91177308-0d34-0410-b5e6-96231b3b80d8
We are already setting <undef> flags, and that is good enough. The
<imp-def> operands don't mean anything any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152009 91177308-0d34-0410-b5e6-96231b3b80d8