This patch changes the fast-math implementation for calculating sqrt(x) from:
y = 1 / (1 / sqrt(x))
to:
y = x * (1 / sqrt(x))
This has 2 benefits: less code / faster code and one less estimate instruction
that may lose precision.
The only target that will be affected (until http://reviews.llvm.org/D5658 is approved)
is PPC. The difference in codegen for PPC is 2 less flops for a single-precision sqrtf
or vector sqrtf and 4 less flops for a double-precision sqrt.
We also eliminate a constant load and extra register usage.
Differential Revision: http://reviews.llvm.org/D5682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219445 91177308-0d34-0410-b5e6-96231b3b80d8
The current implementation of GPR->FPR register moves uses a stack slot. This mechanism writes a double word and reads a word. In big-endian the load address must be displaced by 4-bytes in order to get the right value. In little endian this is no longer required. This patch fixes the issue and adds LE regression tests to fast-isel-conversion which currently expose this problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219441 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction emitter will crash if it encounters a CopyToReg
node with a non-register operand like FrameIndex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219428 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM assumes INSERT_SUBREG will always have register operands, so
we need to legalize non-register operands, like FrameIndexes, to
avoid random assertion failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219420 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the Pat<>'s for the intrinsics. These are necessary because we
don't lower these intrinsics to SDNodes but match them directly. See the
rational in the previous commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219362 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I had forgotten to check for NotSlowIncDec in the patterns that can generate
inc/dec for the above pattern (added in D4796).
This currently applies to Atom Silvermont, KNL and SKX.
Test Plan: New checks on atomic_mi.ll
Reviewers: jfb, nadav
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219336 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fix pr21099
The pseudocode of what we were doing (spread through two functions) was:
if (operand.doesNotFitIn32Bits())
Opc.initializeWithFoo();
if (operand < 0)
operand = -operand;
if (operand.doesFitIn8Bits())
Opc.initializeWithBar();
else if (operand.doesFitIn32Bits())
Opc.initializeWithBlah();
doStuff(Opc);
So for operand == INT32_MIN, Opc was never initialized because the operand changes
from fitting in 32 bits to not fitting, causing the various bugs/error messages
noted by pr21099.
This patch adds an extra test at the beginning for this case, and an
llvm_unreachable to have better error message if the operand ends up
not fitting in 32-bits at the end.
Test Plan: new test + make check
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5655
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219257 91177308-0d34-0410-b5e6-96231b3b80d8
Added a FIXME coment instead, we need to handle the case where the
two DS instructions being compared have different numbers of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219236 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
According to the ABI documentation, f128 and {f128} should both be returned
in $f0 and $f2. However, this doesn't match GCC's behaviour which is to
return f128 in $f0 and $f2, but {f128} in $f0 and $f1.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5578
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219196 91177308-0d34-0410-b5e6-96231b3b80d8
The code already folds sign-/zero-extends, but only if they are arguments to
mul and shift instructions. This extends the code to also fold them when they
are direct inputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219187 91177308-0d34-0410-b5e6-96231b3b80d8
Tiny enhancement to the address computation code to also fold sub instructions
if the rhs is constant and can be folded into the offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219186 91177308-0d34-0410-b5e6-96231b3b80d8
This commit fixes an issue with sign-/zero-extending loads that was discovered
by Richard Barton.
We use now the correct load instructions for sign-extending loads to 64bit. Also
updated and added more unit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219185 91177308-0d34-0410-b5e6-96231b3b80d8
The patch's author points out that, despite the function's documentation,
getSetCCResultType is only used to get the SETCC result type (with one
here-removed problematic exception). In one case, getSetCCResultType was being
used to get the predicate type to use for a SELECT node, and then
SIGN_EXTENDing (or truncating) to get the input predicate to match that type.
Unfortunately, this was happening inside visitSIGN_EXTEND, and creating new
SIGN_EXTEND nodes was causing an infinite loop. In addition, this behavior was
wrong if a target was not using ZeroOrNegativeOneBooleanContent. Lastly, the
extension/truncation seems unnecessary here: SELECT is defined as:
Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not i1
then the high bits must conform to getBooleanContents.
So here we remove this use of getSetCCResultType and update
getSetCCResultType's documentation to reflect its actual uses.
Patch by deadal nix!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219141 91177308-0d34-0410-b5e6-96231b3b80d8
This trades a (register-renamer-friendly) movaps for a floating point
/ integer domain cross. That is a very bad trade, even on architectures
where domain crossing is relatively fast. On any chip where there is
even a cycle stall, this is a Very Bad Idea. It doesn't even seem likely
to cause a spill to be introduced because the reason for the copy is to
destructively shuffle in place.
Thanks to Ben Kramer for fixing a bug in this code that my new shuffle
lowering exposed and highlighting that perhaps it should just go away.
=]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219090 91177308-0d34-0410-b5e6-96231b3b80d8
that are unused.
This allows the combiner to delete math feeding shuffles where the math
isn't actually necessary. This improves some of the vperm2x128 tests
that regressed when the vector shuffle lowering started actually
generating vperm instructions rather than forcibly decomposing them.
Sadly, this isn't enough to get this *really* right because we still
form a completely unnecessary permutation. To fix that, we also need to
fold shuffles which just rearrange concatenated or inserted subvectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219086 91177308-0d34-0410-b5e6-96231b3b80d8
It's debatable whether this transform is useful at all, but for now make sure
we don't generate invalid asm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219084 91177308-0d34-0410-b5e6-96231b3b80d8
new vector shuffle lowering.
This is loosely based on a patch by Marius Wachtler to the PR (thanks!).
I refactored it a bi to use std::count_if and a mutable array ref but
the core idea was exactly right. I also added some direct testing of
this case.
I believe PR21137 is now the only remaining regression.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219081 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles using AVX and AVX2 instructions. This fixes PR21138, one of the
few remaining regressions impacting benchmarks from the new vector
shuffle lowering.
You may note that it "regresses" many of the vperm2x128 test cases --
these were actually "improved" by the naive lowering that the new
shuffle lowering previously did. This regression gave me fits. I had
this patch ready-to-go about an hour after flipping the switch but
wasn't sure how to have the best of both worlds here and thought the
correct solution might be a completely different approach to lowering
these vector shuffles.
I'm now convinced this is the correct lowering and the missed
optimizations shown in vperm2x128 are actually due to missing
target-independent DAG combines. I've even written most of the needed
DAG combine and will submit it shortly, but this part is ready and
should help some real-world benchmarks out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219079 91177308-0d34-0410-b5e6-96231b3b80d8
Update the entire regression test suite for the new shuffles. Remove
most of the old testing which was devoted to the old shuffle lowering
path and is no longer relevant really. Also remove a few other random
tests that only really exercised shuffles and only incidently or without
any interesting aspects to them.
Benchmarking that I have done shows a few small regressions with this on
LNT, zero measurable regressions on real, large applications, and for
several benchmarks where the loop vectorizer fires in the hot path it
shows 5% to 40% improvements for SSE2 and SSE3 code running on Sandy
Bridge machines. Running on AMD machines shows even more dramatic
improvements.
When using newer ISA vector extensions the gains are much more modest,
but the code is still better on the whole. There are a few regressions
being tracked (PR21137, PR21138, PR21139) but by and large this is
expected to be a win for x86 generated code performance.
It is also more correct than the code it replaces. I have fuzz tested
this extensively with ISA extensions up through AVX2 and found no
crashes or miscompiles (yet...). The old lowering had a few miscompiles
and crashers after a somewhat smaller amount of fuzz testing.
There is one significant area where the new code path lags behind and
that is in AVX-512 support. However, there was *extremely little*
support for that already and so this isn't a significant step backwards
and the new framework will probably make it easier to implement lowering
that uses the full power of AVX-512's table-based shuffle+blend (IMO).
Many thanks to Quentin, Andrea, Robert, and others for benchmarking
assistance. Thanks to Adam and others for help with AVX-512. Thanks to
Hal, Eric, and *many* others for answering my incessant questions about
how the backend actually works. =]
I will leave the old code path in the tree until the 3 PRs above are at
least resolved to folks' satisfaction. Then I will rip it (and 1000s of
lines of code) out. =] I don't expect this flag to stay around for very
long. It may not survive next week.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219046 91177308-0d34-0410-b5e6-96231b3b80d8
the various ways in which blends can be used to do vector element
insertion for lowering with the scalar math instruction forms that
effectively re-blend with the high elements after performing the
operation.
This then allows me to bail on the element insertion lowering path when
we have SSE4.1 and are going to be doing a normal blend, which in turn
restores the last of the blends lost from the new vector shuffle
lowering when I got it to prioritize insertion in other cases (for
example when we don't *have* a blend instruction).
Without the patterns, using blends here would have regressed
sse-scalar-fp-arith.ll *completely* with the new vector shuffle
lowering. For completeness, I've added RUN-lines with the new lowering
here. This is somewhat superfluous as I'm about to flip the default, but
hey, it shows that this actually significantly changed behavior.
The patterns I've added are just ridiculously repetative. Suggestions on
making them better very much welcome. In particular, handling the
commuted form of the v2f64 patterns is somewhat obnoxious.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219033 91177308-0d34-0410-b5e6-96231b3b80d8
perform a load to use blendps rather than movss when it is available.
For non-loads, blendps is *much* faster. It can execute on two ports in
Sandy Bridge and Ivy Bridge, and *three* ports on Haswell. This fixes
one of the "regressions" from aggressively taking the "insertion" path
in the new vector shuffle lowering.
This does highlight one problem with blendps -- it isn't commuted as
heavily as it should be. That's future work though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219022 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219010 91177308-0d34-0410-b5e6-96231b3b80d8
In the X86 backend, matching an address is initiated by the 'addr' complex
pattern and its friends. During this process we may reassociate and-of-shift
into shift-of-and (FoldMaskedShiftToScaledMask) to allow folding of the
shift into the scale of the address.
However as demonstrated by the testcase, this can trigger CSE of not only the
shift and the AND which the code is prepared for but also the underlying load
node. In the testcase this node is sitting in the RecordedNode and MatchScope
data structures of the matcher and becomes a deleted node upon CSE. Returning
from the complex pattern function, we try to access it again hitting an assert
because the node is no longer a load even though this was checked before.
Now obviously changing the DAG this late is bending the rules but I think it
makes sense somewhat. Outside of addresses we prefer and-of-shift because it
may lead to smaller immediates (FoldMaskAndShiftToScale is an even better
example because it create a non-canonical node). We currently don't recognize
addresses during DAGCombiner where arguably this canonicalization should be
performed. On the other hand, having this in the matcher allows us to cover
all the cases where an address can be used in an instruction.
I've also talked a little bit to Dan Gohman on llvm-dev who added the RAUW for
the new shift node in FoldMaskedShiftToScaledMask. This RAUW is responsible
for initiating the recursive CSE on users
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/076903.html) but it
is not strictly necessary since the shift is hooked into the visited user. Of
course it's safer to keep the DAG consistent at all times (e.g. for accurate
number of uses, etc.).
So rather than changing the fundamentals, I've decided to continue along the
previous patches and detect the CSE. This patch installs a very targeted
DAGUpdateListener for the duration of a complex-pattern match and updates the
matching state accordingly. (Previous patches used HandleSDNode to detect the
CSE but that's not practical here). The listener is only installed on X86.
I tested that there is no measurable overhead due to this while running
through the spec2k BC files with llc. The only thing we pay for is the
creation of the listener. The callback never ever triggers in spec2k since
this is a corner case.
Fixes rdar://problem/18206171
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219009 91177308-0d34-0410-b5e6-96231b3b80d8
The test Atomics-32.ll was both redundant (all operations are also checked by
atomics.ll at least) and not actually checking correctness (it was not using
FileCheck, just verifying that the compiler does not crash).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218997 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
hwsync is only required for seq_cst fences, acquire and release one can use
the cheaper lwsync.
Test Plan: Added some cases to atomics.ll + make check-all
Reviewers: jfb, wschmidt
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5317
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218995 91177308-0d34-0410-b5e6-96231b3b80d8
and MOVSD nodes for single element vector inserts.
This is particularly important because a number of patterns in the
backend detect these patterns and leverage them to simplify things. It
also fixes quite a few of the insertion bad code examples. However, it
regresses a specific area: when available, blendps and blendpd are
*dramatically* faster than movss and movsd respectively. But it doesn't
really work to form the blend logic first because the blends *aren't* as
crazy efficient when the data is coming from memory anyways, and thus
will have a movss or movsd regardless. Also, doing that would block
a bunch of the patterns that this is designed to hit.
So my plan is to go into the patterns for lowering MOVSS and MOVSD and
lower them via blends when available. However that's a pretty invasive
restructuring so it will need to be a follow-up patch.
I have already gone into the patterns to lower MOVSS and MOVSD from
memory using MOVLPD, etc. Without that, several of the test cases
I already have regress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218985 91177308-0d34-0410-b5e6-96231b3b80d8
That commit was introduced in order to help investigate a problem in ARM
codegen breaking from commit 202304 (Add a limit to the heuristic that register
allocates instructions in local order). Recent analisys indicated that the
problem no longer exists, so I'm reverting this change.
See PR18996.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218981 91177308-0d34-0410-b5e6-96231b3b80d8
I got them quite wrong when updating it and had the SSE4.1 run checked
for SSE2 and the SSE2 run checked for SSE4.1. I think everything was
actually generic SSE, but this still seems good to fix. While here,
hoist the triple into the IR and make the flag set a bit more direct in
what it is trying to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218978 91177308-0d34-0410-b5e6-96231b3b80d8
lowering to match VZEXT_MOVL patterns.
I hadn't realized that these had sufficient pattern smarts in the
backend to lower zext-ing from the low element of a vector without it
being a scalar_to_vector node. They do, and this is how to match a bunch
of patterns for movq, movss, etc.
There is a weird propensity to end up using pshufd to place the element
afterward even though it means domain crossing (or rather, to use
xorps+movss to zext the element rather than movq) but that's an
orthogonal problem with VZEXT_MOVL that someone should probably look at.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218977 91177308-0d34-0410-b5e6-96231b3b80d8
vector to a zero vector for the v2 cases and fix the v4 integer cases to
actually blend from a vector.
There are already seprate tests for the case of inserting from a scalar.
These cases cover a lot of the regressions I've seen in the regression
test suite for the new vector shuffle lowering and specifically cover
the reported lack of using various zext-ing instruction patterns. My
next patch should fix a big chunk of this, but wanted to get a nice
baseline for these patterns in the test cases first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218976 91177308-0d34-0410-b5e6-96231b3b80d8
element types to form illegal vector types.
I've added a special SSE1 test case here that makes sure we don't break
this going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218974 91177308-0d34-0410-b5e6-96231b3b80d8
testing that we generated divps and divss but not in a very systematic
way. There are other tests for widening binary operations already that
make these unnecessary.
The second one seems mostly about testing Atom as well as normal X86,
but despite the comment claiming it is testing a different instruction
sequence, it then tests for exactly the same div instruction sequence!
(The sequence of instructions is actually quite different on Atom, but
not the sequence of div instructions....)
And then it has an "execution" test that simply isn't run? Very strange.
Anyways, none of this is really needed so clean this up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218972 91177308-0d34-0410-b5e6-96231b3b80d8
a test case that was just grepping the debug stats output rather than
actually checking the generated code for anything useful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218951 91177308-0d34-0410-b5e6-96231b3b80d8
intergrated much more fully into some logical part of the backend to
really understand what it is trying to accomplish and how to update it.
I suspect it no longer holds enough value to be worth having.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218950 91177308-0d34-0410-b5e6-96231b3b80d8
shufle switch.
I nuked a win64 config from one test as it doesn't really make sense to
cover that ABI specially for generic v2f32 tests...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218948 91177308-0d34-0410-b5e6-96231b3b80d8
two functions that really didn't have any interesting assertions, and
generated more precise tests for one of the others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218946 91177308-0d34-0410-b5e6-96231b3b80d8
test cases that will change with the new vector shuffle lowering. This
gives us a nice baseline for deltas against. I've checked and removed
the cases where there were weird register usage being pinned down, and
all of these are extremely pin-pointed tests so fully checking them
seems very appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218941 91177308-0d34-0410-b5e6-96231b3b80d8
tighter, more strict FileCheck assertions. Some of these I really like
as they show case exactly what instruction sequences come out of these
microscopic functionality tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218936 91177308-0d34-0410-b5e6-96231b3b80d8
baseline for updates from the new vector shuffle lowering.
I've inspected the results here, and I couldn't find any register
allocation decisions where there should be any realistic way to register
allocate things differently. The closest was the imul test case. If you
see something here you'd like register number variables on, just shout
and I'll add them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218935 91177308-0d34-0410-b5e6-96231b3b80d8
need to be updated for the new vector shuffle lowering.
After talking to Adam Nemet, Tim Northover, etc., it seems that testing
MC encodings in the same suite as the basic codegen isn't the right
approach. Instead, we're going to want dedicated MC tests for the
encodings. These encodings are starting to get in my way so I wanted to
cut them out early. The total set of instructions that should have
encoding tests added is:
vpaddd
vsqrtss
vsqrtsd
vmovlhps
vmovhlps
valignq
vbroadcastss
Not too many parts of these tests were even using this. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218932 91177308-0d34-0410-b5e6-96231b3b80d8
Older Book-E cores, such as the PPC 440, support only msync (which has the same
encoding as sync 0), but not any of the other sync forms. Newer Book-E cores,
however, do support sync, and for performance reasons we should allow the use
of the more-general form.
This refactors msync use into its own feature group so that it applies by
default only to older Book-E cores (of the relevant cores, we only have
definitions for the PPC440/450 currently).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218923 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Atomic loads and store of up to the native size (32 bits, or 64 for PPC64)
can be lowered to a simple load or store instruction (as the synchronization
is already handled by AtomicExpand, and the atomicity is guaranteed thanks to
the alignment requirements of atomic accesses). This is exactly what this patch
does. Previously, these were implemented by complex
load-linked/store-conditional loops.. an obvious performance problem.
For example, this patch turns
```
define void @store_i8_unordered(i8* %mem) {
store atomic i8 42, i8* %mem unordered, align 1
ret void
}
```
from
```
_store_i8_unordered: ; @store_i8_unordered
; BB#0:
rlwinm r2, r3, 3, 27, 28
li r4, 42
xori r5, r2, 24
rlwinm r2, r3, 0, 0, 29
li r3, 255
slw r4, r4, r5
slw r3, r3, r5
and r4, r4, r3
LBB4_1: ; =>This Inner Loop Header: Depth=1
lwarx r5, 0, r2
andc r5, r5, r3
or r5, r4, r5
stwcx. r5, 0, r2
bne cr0, LBB4_1
; BB#2:
blr
```
into
```
_store_i8_unordered: ; @store_i8_unordered
; BB#0:
li r2, 42
stb r2, 0(r3)
blr
```
which looks like a pretty clear win to me.
Test Plan:
fixed the tests + new test for indexed accesses + make check-all
Reviewers: jfb, wschmidt, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218922 91177308-0d34-0410-b5e6-96231b3b80d8
Do not eliminate the frame pointer if there is a stackmap or patchpoint in the
function. All stackmap references should be FP relative.
This fixes PR21107.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218920 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218914 91177308-0d34-0410-b5e6-96231b3b80d8
elements as well as integer elements in order to form simpler shuffle
patterns.
This is the primary reason why we were failing to match some of the
2-and-2 floating point shuffles such as PR21140. Even after fixing this
we need to support some extra patterns in the backend in order to match
the resulting X86ISD::UNPCKL nodes into the correct instructions. This
commit should fix PR21140 and includes more comprehensive testing of
insertion patterns in v4 shuffles.
Not all of the added tests are beautiful. For example, we don't have
clever instructions to insert-via-load in the integer domain. There are
also some places where we aren't sufficiently cunning with our use of
movq and movd, but that's future work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218911 91177308-0d34-0410-b5e6-96231b3b80d8
floating point and integer domains.
Merge the AVX2 test into it and add an extra RUN line. Generate clean
FileCheck statements with my script. Remove the now merged AVX2 tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218903 91177308-0d34-0410-b5e6-96231b3b80d8
This file isn't really doing anything useful. Many of the tests that
seem to be combined are also repeats from other test files. Many of the
other tests, despite the comment that they should be combined into
a single shuffle... well... aren't combined into a single shuffle.
=/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218862 91177308-0d34-0410-b5e6-96231b3b80d8
least seem *slightly* more interesting test wise, although given how
spotily we actually combine anything, I remain somewhat suspicious.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218861 91177308-0d34-0410-b5e6-96231b3b80d8
checks for all the ISA variants.
If the SSE2 checks here terrify you, good. This is (in large part) the
kind of amazingly bad code that is holding LLVM back when vectorizing on
older ISAs.
At the same time, these tests seem increasingly dubious to me. There are
a very large number of tests and it isn't clear that they are
systematically covering a specific set of functionality. Anyways,
I don't want to reduce testing during the transition, I just want to
consolidate it to where it is easier to manage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218860 91177308-0d34-0410-b5e6-96231b3b80d8
file.
Some of these really don't make sense to test -- we're testing for the
*lack* of combining two shuffles into one, presumably because the two
would generate better shuffles in the end. But if you look at the
generated code shown here, in many cases the generated code is, frankly,
terrible. Or we combine any two generated shuffles back into a single
instruction! I've left a FIXME to revisit these decisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218859 91177308-0d34-0410-b5e6-96231b3b80d8
and use the new grouped FileCheck patterns to match them.
No interesting changes yet, but this test is now in proper form to have
the other shuffle combining tests merged into it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218857 91177308-0d34-0410-b5e6-96231b3b80d8
The test has to do with DAG combines, and so it doesn't need the new
vector shuffle lowering to be effective. Also, it has a nice in-IR
triple string which we should really be using rather than command line
flags (unless it varies form RUN-line to RUN-line). Finally, I much
prefer letting LLVM synthesize the correct datalayout string from the
triple rather than baking one in here that will just become stale.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218856 91177308-0d34-0410-b5e6-96231b3b80d8
generic DAG combining of shuffles relevant to x86.
My plan is to fold a bunch of the other DAG combining test cases into
this one, while converting them to use the nice new FileCheck assertion
syntax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218855 91177308-0d34-0410-b5e6-96231b3b80d8
a bare-metal triple and have nice BB labels, etc.
No significant change here, just tidying up to have a consistent set of
OS-agnostic vector functionality here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218854 91177308-0d34-0410-b5e6-96231b3b80d8
matching and lowering 64-bit insertions.
The first problem was that we weren't looking through bitcasts to
discover that we *could* lower as insertions. Once fixed, we in turn
weren't looking through bitcasts to discover that we could fold a load
into the lowering. Once fixed, we weren't forming a SCALAR_TO_VECTOR
node around the inserted element and instead were passing a scalar to
a DAG node that expected a vector. It turns out there are some patterns
that will "lower" this into the correct asm, but the rest of the X86
backend is very unhappy with such antics.
This should fix a few more edge case regressions I've spotted going
through the regression test suite to enable the new vector shuffle
lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218839 91177308-0d34-0410-b5e6-96231b3b80d8
test file.
This old test had a bunch of functions that were never even checked. =/
The only thing it really did was to make sure that we did something
reasonable in 32-bit mode with SSE4.1. Adding another run line to the
main vector-sext.ll test seems a better way to do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218810 91177308-0d34-0410-b5e6-96231b3b80d8
of architectures: SSE2, SSSE3, SSE4.1, AVX, and AVX2.
Unfortunately, this exposses the absolute horror of the code we generate
for many of these patterns. Anyone wanting to familiarize themselves
with the x86 backend and improve performance could do a lot of good
sitting down and making these test cases not look so terrible. While the
new vector shuffle code I'm working on well help some, it won't fix all
of the crimes here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218807 91177308-0d34-0410-b5e6-96231b3b80d8
These tests are far and away the best sext and zext tests we have for
vectors. I'm going to merge the other similar tests into them and expand
the ISA coverage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218800 91177308-0d34-0410-b5e6-96231b3b80d8
script to make them nice and predictable. This will ease updating them
for the new vector shuffle lowering and seeing the delta if any.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218795 91177308-0d34-0410-b5e6-96231b3b80d8
avx-sext.ll using my new script.
Also add an AVX2 mode to this test.
Part of cleaning up the test suite before enabling the new vector
shuffle lowering. This also highlights some of the abysmal failures of
the old shuffle lowering. Check out those 'pinsrw' and 'pextrw'
sequences!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218794 91177308-0d34-0410-b5e6-96231b3b80d8
As with x86 and AArch64, certain situations can arise where we need to spill
CPSR in the middle of a calculation. These should be avoided where possible
(MRS/MSR is rather expensive), which ARM is actually better at than the other
two since it tries to Glue defs to uses, but as a last ditch effort, copying is
better than crashing.
rdar://problem/18011155
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218789 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement conversion of 64 to 32 bit floating point numbers (fptrunc) in mips fast-isel
Test Plan:
fptrunc.ll
checked also with 4 internal mips build bot flavors mip32r1/miprs32r2 and at -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: rfuhler
Differential Revision: http://reviews.llvm.org/D5553
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218785 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218778 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, we only codegen the VRINT[APMXZR] and VCVT[BT] instructions
when targeting ARMv8, but they are actually present on any target with
FP-ARMv8. Note that FP-ARMv8 is called FPv5 when is is part of an
M-profile core, but they have the same instructions so we model them
both as FPARMv8 in the ARM backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218763 91177308-0d34-0410-b5e6-96231b3b80d8
that keep cropping up in the regression test suite.
This also addresses one of the issues raised on the mailing list with
failing to form 'movsd' in as many cases as we realistically should.
There will be corresponding patches forthcoming for v4f32 at least. This
was a lot of fuss for a relatively small gain, but all the fuss was on
my end trying different ways of holding the pieces of the x86 fragment
patterns *just right*. Now that it works, the code is reasonably simple.
In the new test cases I'm adding here, v2i64 sticks out as just plain
horrible. I've not come up with any great ideas here other than that it
would be nice to recognize when we're *going* to take a domain crossing
hit and cross earlier to get the decent instructions. At least with AVX
it is slightly less silly....
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218756 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The natual vector cast node (similar to bitcast) AArch64ISD::NVCAST
was introduced in r217159 and r217138. This patch adds a missing cast from
v2f32 to v1i64 which is causing some compilation failures. Also added test
cases to cover various modimm types and BUILD_VECTORs with i64 elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218751 91177308-0d34-0410-b5e6-96231b3b80d8
The Cortex-M7 has 3 options for its FPU: none, FPv5-SP-D16 and
FPv5-DP-D16. FPv5 has the same instructions as FP-ARMv8, so it can be
modelled using the same target feature, and all double-precision
operations are already disabled by the fp-only-sp target features.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218747 91177308-0d34-0410-b5e6-96231b3b80d8
in exposing the scalar value to the broadcast DAG fragment so that we
can catch even reloads and fold them into the broadcast.
This is somewhat magical I'm afraid but seems to work. It is also what
the old lowering did, and I've switched an old test to run both
lowerings demonstrating that we get the same result.
Unlike the old code, I'm not lowering f32 or f64 scalars through this
path when we only have AVX1. The target patterns include pretty heinous
code to re-cast those as shuffles when the scalar happens to not be
spilled because AVX1 provides no broadcast mechanism from registers
what-so-ever. This is terribly brittle. I'd much rather go through our
generic lowering code to get this. If needed, we can add a peephole to
get even more opportunities to broadcast-from-spill-slots that are
exposed post-RA, but my suspicion is this just doesn't matter that much.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218734 91177308-0d34-0410-b5e6-96231b3b80d8
the same speed as pshufd but we can fold loads into the pmovzx
instructions.
This fixes some regressions that came up in the regression test suite
for the new vector shuffle lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218733 91177308-0d34-0410-b5e6-96231b3b80d8
VPBROADCAST.
This has the somewhat expected pervasive impact. I don't know why
I forgot about this. Everything seems good with lots of significant
improvements in the tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218724 91177308-0d34-0410-b5e6-96231b3b80d8
cases.
While clearly we don't need the AVX vector width, these ISA extensions
often cause us to select different instructions and we should cover them
even with the narrow vector width.
Also, while here, nuke the stress_test2 contents. There is no reason to
try to FileCheck this entire body when it is mostly a test for
successfully surviving the code generator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218710 91177308-0d34-0410-b5e6-96231b3b80d8
shuffle tests to match that used in the script I posted and now used
consistently in 128-bit tests.
Nothing interesting changing here, just using the label name as the
FileCheck label and a slightly more general comment marker consumption
strategy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218709 91177308-0d34-0410-b5e6-96231b3b80d8
updating script so that they are more thorough and consistent.
Specific fixes here include:
- Actually test VEX-encoded AVX mnemonics.
- Actually use an SSE 4.1 run to test SSE 4.1 features!
- Correctly check instructions sequences from the start of the function.
- Elide the shuffle operands and comment designator in a consistent way.
- Test all of the architectures instead of just the ones I was motivated
to manually author.
I've gone back through and fixed up any egregious issues I spotted. Let
me know if I missed something you really dislike.
One downside to this is that we're now not as diligently using FileCheck
variables for registers. I would be much more concerned with this if we
had larger register usage, but there just aren't that interesting of
register choices here and most of the registers are constrained by the
ABI. Ultimately, I don't think this is likely to be the maintenance
burden for these tests and updating them again should be staright
forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218707 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This version fixed an issue with the TBZ/TBNZ instructions that were
generated in FastISel. The issue was that the 64bit version of TBZ (TBZX)
automagically sets the upper bit of the immediate field that is used to specify
the bit we want to test. To test for any of the lower 32bits we have to first
extract the subregister and use the 32bit version of the TBZ instruction (TBZW).
Original commit message:
Teach selectBranch to fold bit test and branch into a single instruction (TBZ or
TBNZ).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218693 91177308-0d34-0410-b5e6-96231b3b80d8
No tests for omod since nothing uses it yet, but
this should get rid of the remaining annoying trailing
zeros after some instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218692 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed lowering of this intrinsics in case when mask is v2i1 and v4i1.
Now cmp intrinsics lower in the following way:
(i8 (int_x86_avx512_mask_pcmpeq_q_128
(v2i64 %a), (v2i64 %b), (i8 %mask))) ->
(i8 (bitcast
(v8i1 (insert_subvector undef,
(v2i1 (and (PCMPEQM %a, %b),
(extract_subvector
(v8i1 (bitcast %mask)), 0))), 0))))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218669 91177308-0d34-0410-b5e6-96231b3b80d8
a flawed direction and causing miscompiles. Read on for details.
Fundamentally, the premise of this patch series was to map
VECTOR_SHUFFLE DAG nodes into VSELECT DAG nodes for all blends because
we are going to *have* to lower to VSELECT nodes for some blends to
trigger the instruction selection patterns of variable blend
instructions. This doesn't actually work out so well.
In order to match performance with the existing VECTOR_SHUFFLE
lowering code, we would need to re-slice the blend in order to fit it
into either the integer or floating point blends available on the ISA.
When coming from VECTOR_SHUFFLE (or other vNi1 style VSELECT sources)
this works well because the X86 backend ensures that these types of
operands to VSELECT get sign extended into '-1' and '0' for true and
false, allowing us to re-slice the bits in whatever granularity without
changing semantics.
However, if the VSELECT condition comes from some other source, for
example code lowering vector comparisons, it will likely only have the
required bit set -- the high bit. We can't blindly slice up this style
of VSELECT. Reid found some code using Halide that triggers this and I'm
hopeful to eventually get a test case, but I don't need it to understand
why this is A Bad Idea.
There is another aspect that makes this approach flawed. When in
VECTOR_SHUFFLE form, we have very distilled information that represents
the *constant* blend mask. Converting back to a VSELECT form actually
can lose this information, and so I think now that it is better to treat
this as VECTOR_SHUFFLE until the very last moment and only use VSELECT
nodes for instruction selection purposes.
My plan is to:
1) Clean up and formalize the target pre-legalization DAG combine that
converts a VSELECT with a constant condition operand into
a VECTOR_SHUFFLE.
2) Remove any fancy lowering from VSELECT during *legalization* relying
entirely on the DAG combine to catch cases where we can match to an
immediate-controlled blend instruction.
One additional step that I'm not planning on but would be interested in
others' opinions on: we could add an X86ISD::VSELECT or X86ISD::BLENDV
which encodes a fully legalized VSELECT node. Then it would be easy to
write isel patterns only in terms of this to ensure VECTOR_SHUFFLE
legalization only ever forms the fully legalized construct and we can't
cycle between it and VSELECT combining.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218658 91177308-0d34-0410-b5e6-96231b3b80d8
The sign-/zero-extension of the loaded value can be performed by the memory
instruction for free. If the result of the load has only one use and the use is
a sign-/zero-extend, then we emit the proper load instruction. The extend is
only a register copy and will be optimized away later on.
Other instructions that consume the sign-/zero-extended value are also made
aware of this fact, so they don't fold the extend too.
This fixes rdar://problem/18495928.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218653 91177308-0d34-0410-b5e6-96231b3b80d8
map, this makes sure that we can compile the same code for two different
ABIs (hard and soft float) in the same module.
Update one testcase accordingly (and fix some confusing naming) and
add a new testcase as well with the ordering swapped which would
highlight the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218632 91177308-0d34-0410-b5e6-96231b3b80d8
These turn into fadds, so combine them into the target
mad node.
fadd (fadd (a, a), b) -> mad 2.0, a, b
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218608 91177308-0d34-0410-b5e6-96231b3b80d8
nodes, and rely exclusively on its logic. This removes a ton of
duplication from the blend lowering and centralizes it in one place.
One downside is that it requires a bunch of hacks to make this work with
the current legalization framework. We have to manually speculate one
aspect of legalizing VSELECT nodes to get everything to work nicely
because the existing legalization framework isn't *actually* bottom-up.
The other grossness is that we somewhat duplicate the analysis of
constant blends. I'm on the fence here. If reviewers thing this would
look better with VSELECT when it has constant operands dumping over tho
VECTOR_SHUFFLE, we could go that way. But it would be a substantial
change because currently all of the actual blend instructions are
matched via patterns in the TD files based around VSELECT nodes (despite
them not being perfect fits for that). Suggestions welcome, but at least
this removes the rampant duplication in the backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218600 91177308-0d34-0410-b5e6-96231b3b80d8
X86 target-specific DAG combining that tried to convert VSELECT nodes
into VECTOR_SHUFFLE nodes that it "knew" would lower into
immediate-controlled blend nodes.
Turns out, we have perfectly good lowering of all these VSELECT nodes,
and indeed that lowering already knows how to handle lowering through
BLENDI to immediate-controlled blend nodes. The code just wasn't getting
used much because this thing forced the world to go through the vector
shuffle lowering. Yuck.
This also exposes that I was too aggressive in avoiding domain crossing
in v218588 with that lowering -- when the other option is to expand into
two 128-bit vectors, it is worth domain crossing. Restore that behavior
now that we have nice tests covering it.
The test updates here fall into two camps. One is where previously we
ended up with an unsigned encoding of the blend operand and now we get
a signed encoding. In most of those places there were elaborate comments
explaining exactly what these operands really mean. Rather than that,
just switch these tests to use the nicely decoded comments that make it
obvious that the final shuffle matches.
The other updates are just removing pointless domain crossing by
blending integers with PBLENDW rather than BLENDPS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218589 91177308-0d34-0410-b5e6-96231b3b80d8
AVX-512.
There is no interesting logic yet. Everything ends up eventually
delegating to the generic code to split the vector and shuffle the
halves. Interestingly, that logic does a significantly better job of
lowering all of these types than the generic vector expansion code does.
Mostly, it lets most of the cases fall back to nice AVX2 code rather
than all the way back to SSE code paths.
Step 2 of basic AVX-512 support in the new vector shuffle lowering. Next
up will be to incrementally add direct support for the basic instruction
set to each type (adding tests first).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218585 91177308-0d34-0410-b5e6-96231b3b80d8
vectors.
Someone will need to build the AVX512 lowering, which should follow
AVX1 and AVX2 *very* closely for AVX512F and AVX512BW resp. I've added
a dummy test which is a port of the v8f32 and v8i32 tests from AVX and
AVX2 to v8f64 and v8i64 tests for AVX512F and AVX512BW. Hopefully this
is enough information for someone to implement proper lowering here. If
not, I'll be happy to help, but right now the AVX-512 support isn't
a priority for me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218583 91177308-0d34-0410-b5e6-96231b3b80d8
lowerings.
This was hopelessly broken. First, the x86 backend wants '-1' to be the
element value representing true in a boolean vector, and second the
operand order for VSELECT is backwards from the actual x86 instructions.
To make matters worse, the backend is just using '-1' as the true value
to get the high bit to be set. It doesn't actually symbolically map the
'-1' to anything. But on x86 this isn't quite how it works: there *only*
the high bit is relevant. As a consequence weird non-'-1' values like
0x80 actually "work" once you flip the operands to be backwards.
Anyways, thanks to Hal for helping me sort out what these *should* be.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218582 91177308-0d34-0410-b5e6-96231b3b80d8
new vector shuffle target DAG combines -- it helps to actually test for
the value you want rather than just using an integer in a boolean
context.
Have I mentioned that I loathe implicit conversions recently? :: sigh ::
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218576 91177308-0d34-0410-b5e6-96231b3b80d8
of widening masks.
We can't widen a zeroing mask unless both elements that would be merged
are either zeroed or undef. This is the only way to widen a mask if it
has a zeroed element.
Also clean up the code here by ordering the checks in a more logical way
and by using the symoblic values for undef and zero. I'm actually torn
on using the symbolic values because the existing code is littered with
the assumption that -1 is undef, and moreover that entries '< 0' are the
special entries. While that works with the values given to these
constants, using the symbolic constants actually makes it a bit more
opaque why this is the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218575 91177308-0d34-0410-b5e6-96231b3b80d8
If there is a store followed by a store with the same value to the same location, then the store is dead/noop. It can be removed.
This problem is found in spec2006-197.parser.
For example,
stur w10, [x11, #-4]
stur w10, [x11, #-4]
Then one of the two stur instructions can be removed.
Patch by David Xu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218569 91177308-0d34-0410-b5e6-96231b3b80d8
and in the target shuffle combining when trying to widen vector
elements.
Previously only one of these was correct, and we didn't correctly
propagate zeroing target shuffle masks (which have a different sentinel
value from undef in non- target shuffle masks now). This isn't just
a missed optimization, this caused us to drop zeroing shuffles on the
floor and miscompile code. The added test case is one example of that.
There are other fixes to the test suite as a consequence of this as well
as restoring the undef elements in some of the masks that were lost when
I brought sanity to the actual *value* of the undef and zero sentinels.
I've also just cleaned up some of the PSHUFD and PSHUFLW and PSHUFHW
combining code, but that code really needs to go. It was a nice initial
attempt, but it isn't very principled and the recursive shuffle combiner
is much more powerful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218562 91177308-0d34-0410-b5e6-96231b3b80d8
to significantly more sane sentinels. Notably, everywhere else in the
backend's representation of shuffles uses '-1' to represent undef. The
target shuffle masks really shouldn't diverge from that, especially as
in a few places they are manipulated by shared code.
This causes us to lose some undef lanes in various test masks. I want to
get these back, but technically it isn't invalid and there are a *lot*
of bugs here so I want to try to establish a saner baseline for fixing
some of the bugs by aligning the specific senitnel values used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218561 91177308-0d34-0410-b5e6-96231b3b80d8
This is purely refactoring. No functional changes intended. PowerPC is the only target
that is currently using this interface.
The ultimate goal is to allow targets other than PowerPC (certainly X86 and Aarch64) to turn this:
z = y / sqrt(x)
into:
z = y * rsqrte(x)
And:
z = y / x
into:
z = y * rcpe(x)
using whatever HW magic they can use. See http://llvm.org/bugs/show_bug.cgi?id=20900 .
There is one hook in TargetLowering to get the target-specific opcode for an estimate instruction
along with the number of refinement steps needed to make the estimate usable.
Differential Revision: http://reviews.llvm.org/D5484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218553 91177308-0d34-0410-b5e6-96231b3b80d8
that managed to elude all of my fuzz testing historically. =/
Something changed to allow this code path to actually be exercised and
it was doing bad things. It is especially heavily exercised by the
patterns that emerge when doing AVX shuffles that end up lowered through
the 128-bit code path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218540 91177308-0d34-0410-b5e6-96231b3b80d8
This has weird operand requirements so it's worthwhile
to have very strict checks for its operands.
Add different combinations of SGPR operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218535 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of moving the first SGPR that is different than the first,
legalize the operand that requires the fewest moves if one
SGPR is used for multiple operands.
This saves extra moves and is also required for some instructions
which require that the same operand be used for multiple operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218532 91177308-0d34-0410-b5e6-96231b3b80d8
Disable the SGPR usage restriction parts of the DAG legalizeOperands.
It now should only be doing immediate folding until it can be replaced
later. The real legalization work is now done by the other
SIInstrInfo::legalizeOperands
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218531 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. v_cndmask_b32 requires the condition operand be an SGPR.
If one of the source operands were an SGPR, that would be considered
the one SGPR use and the condition operand would be illegally moved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218529 91177308-0d34-0410-b5e6-96231b3b80d8
No test since the current SIISelLowering::legalizeOperands
effectively hides this, and the general uses seem to only fire
on SALU instructions which don't have modifiers between
the operands.
When trying to use legalizeOperands immediately after
instruction selection, it now sees a lot more patterns
it did not see before which break on this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218527 91177308-0d34-0410-b5e6-96231b3b80d8
layer of tie-breaking sorting, it really helps to check that you're in
a tie first. =] Otherwise the whole thing cycles infinitely. Test case
added, another one found through fuzz testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218523 91177308-0d34-0410-b5e6-96231b3b80d8
AVX support.
New test cases included. Note that none of the existing test cases
covered these buggy code paths. =/ Also, it is clear from this that
SHUFPS and SHUFPD are the most bug prone shuffle instructions in x86. =[
These were all detected by fuzz-testing. (I <3 fuzz testing.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218522 91177308-0d34-0410-b5e6-96231b3b80d8
based on the Function. This is currently used to implement
mips16 support in the mips backend via the existing module
pass resetting the subtarget.
Things to note:
a) This involved running resetTargetOptions before creating a
new subtarget so that code generation options like soft-float
could be recognized when creating the new subtarget. This is
to deal with initialization code in isel lowering that only
paid attention to the initial value.
b) Many of the existing testcases weren't using the soft-float
feature correctly. I've corrected these based on the check
values assuming that was the desired behavior.
c) The mips port now pays attention to the target-cpu and
target-features strings when generating code for a particular
function. I've removed these from one function where the
requested cpu and features didn't match the check lines in
the testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218492 91177308-0d34-0410-b5e6-96231b3b80d8
Machine Sink uses loop depth information to select between successors BBs to
sink machine instructions into, where BBs within smaller loop depths are
preferable. This patch adds support for choosing between successors by using
profile information from BlockFrequencyInfo instead, whenever the information
is available.
Tested it under SPEC2006 train (average of 30 runs for each program); ~1.5%
execution speedup in average on x86-64 darwin.
<rdar://problem/18021659>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218472 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I originally tried doing this specifically for X86 in the backend in D5091,
but it was rather brittle and generally running too late to be general.
Furthermore, other targets may want to implement similar optimizations.
So I reimplemented it at the IR-level, fitting it into AtomicExpandPass
as it interacts with that pass (which could not be cleanly done before
at the backend level).
This optimization relies on a new target hook, which is only used by X86
for now, as the correctness of the optimization on other targets remains
an open question. If it is found correct on other targets, it should be
trivial to enable for them.
Details of the optimization are discussed in D5091.
Test Plan: make check-all + a new test
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218455 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions do not indicate they are extendable or the
number of bits in the extendable operand. Rename to match
architected names. Add a testcase for the intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218453 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The N32/N64 ABI's require that structs passed in registers are laid out
such that spilling the register with 'sd' places the struct at the lowest
address. For little endian this is trivial but for big-endian it requires
that structs are shifted into the upper bits of the register.
We also require that structs passed in registers have the 'inreg'
attribute for big-endian N32/N64 to work correctly. This is because the
tablegen-erated calling convention implementation only has access to the
lowered form of struct arguments (one or more integers of up to 64-bits
each) and is unable to determine the original type.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5286
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218451 91177308-0d34-0410-b5e6-96231b3b80d8
v4f64 and v8f32 shuffles when they are lane-crossing. We have fully
general lane-crossing permutation functions in AVX2 that make this easy.
Part of this also changes exactly when and how these vectors are split
up when we don't have AVX2. This isn't always a win but it usually is
a win, so on the balance I think its better. The primary regressions are
all things that just need to be fixed anyways such as modeling when
a blend can be completely accomplished via VINSERTF128, etc.
Also, this highlights one of the few remaining big features: we do
a really poor job of inserting elements into AVX registers efficiently.
This completes almost all of the big tricks I have in mind for AVX2. The
only things left that I plan to add:
1) element insertion smarts
2) palignr and other fairly specialized lowerings when they happen to
apply
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218449 91177308-0d34-0410-b5e6-96231b3b80d8
256-bit vectors with lane-crossing.
Rather than immediately decomposing to 128-bit vectors, try flipping the
256-bit vector lanes, shuffling them and blending them together. This
reduces our worst case shuffle by a pretty significant margin across the
board.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218446 91177308-0d34-0410-b5e6-96231b3b80d8
lowering where it only used the mask of the low 128-bit lane rather than
the entire mask.
This allows the new lowering to correctly match the unpack patterns for
v8i32 vectors.
For reference, the reason that we check for the the entire mask rather
than checking the repeated mask is because the repeated masks don't
abide by all of the invariants of normal masks. As a consequence, it is
safer to use the full mask with functions like the generic equivalence
test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218442 91177308-0d34-0410-b5e6-96231b3b80d8
lowering.
This completes the basic AVX2 feature support, but there are still some
improvements I'd like to do to really get the last mile of performance
here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218440 91177308-0d34-0410-b5e6-96231b3b80d8
I made a mistake in the previous commit and produced the wrong pattern.
Fix that. Also make one more shuffle pattern byte-based rather than
word-based, and add two more blend patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218439 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles rather than word shuffles.
As you might guess, these were built starting from the word shuffle test
cases and I failed to properly port a bunch of them and left them as
widened word shuffle test cases. We still have a couple of tests that
check our ability to widen shuffles, but now we will test the actual
byte shuffle quite a bit better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218438 91177308-0d34-0410-b5e6-96231b3b80d8
missing test cases for it.
Unsurprisingly, without test cases, there were bugs here. Surprisingly,
this bug wasn't caught at compile time. Yep, there is an X86ISD::BLENDV.
It isn't wired to anything. Oops. I'll fix than next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218434 91177308-0d34-0410-b5e6-96231b3b80d8
lowering.
This also implements the fancy blend lowering for v16i16 using AVX2 and
teaches the X86 backend to print shuffle masks for 256-bit PSHUFB
and PBLENDW instructions. It also makes the mask decoding correct for
PBLENDW instructions. The yaks, they are legion.
Tests are updated accordingly. There are some missing tests for the
VBLENDVB lowering, but I'll add those in a follow-up as this commit has
accumulated enough cruft already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218430 91177308-0d34-0410-b5e6-96231b3b80d8
If it's safe to clobber the condition flags, we can do a few extra things:
it's then possible to reset the base register writeback using a SUBS, so
we can try to merge even if the base register isn't dead after the merged
instruction.
This is effectively a (heavily bug-fixed) rewrite of r208992.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218386 91177308-0d34-0410-b5e6-96231b3b80d8
pool data being loaded into a vector register.
The comments take the form of:
# ymm0 = [a,b,c,d,...]
# xmm1 = <x,y,z...>
The []s are used for generic sequential data and the <>s are used for
specifically ConstantVector loads. Undef elements are printed as the
letter 'u', integers in decimal, and floating point values as floating
point values. Suggestions on improving the formatting or other aspects
of the display are very welcome.
My primary use case for this is to be able to FileCheck test masks
passed to vector shuffle instructions in-register. It isn't fantastic
for that (no decoding special zeroing semantics or other tricks), but it
at least puts the mask onto an instruction line that could reasonably be
checked. I've updated many of the new vector shuffle lowering tests to
leverage this in their test cases so that we're actually checking the
shuffle masks remain as expected.
Before implementing this, I tried a *bunch* of different approaches.
I looked into teaching the MCInstLower code to scan up the basic block
and find a definition of a register used in a shuffle instruction and
then decode that, but this seems incredibly brittle and complex.
I talked to Hal a lot about the "right" way to do this: attach the raw
shuffle mask to the instruction itself in some form of unencoded
operands, and then use that to emit the comments. I still think that's
the optimal solution here, but it proved to be beyond what I'm up for
here. In particular, it seems likely best done by completing the
plumbing of metadata through these layers and attaching the shuffle mask
in metadata which could have fully automatic dropping when encoding an
actual instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218377 91177308-0d34-0410-b5e6-96231b3b80d8
the native AVX2 instructions.
Note that the test case is really frustrating here because VPERMD
requires the mask to be in the register input and we don't produce
a comment looking through that to the constant pool. I'm going to
attempt to improve this in a subsequent commit, but not sure if I will
succeed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218347 91177308-0d34-0410-b5e6-96231b3b80d8
detection. It was incorrectly handling undef lanes by actually treating
an undef lane in the first 128-bit lane as a *numeric* shuffle value.
Fortunately, this almost always DTRT and disabled detecting repeated
patterns. But not always. =/ This patch introduces a much more
principled approach and fixes the miscompiles I spotted by inspection
previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218346 91177308-0d34-0410-b5e6-96231b3b80d8
This testcase was not testing what it meant: because there were only two checks for
dmb {{ish}} in the second function, it could have missed a bug where one of the three
required dmb {{ish}} became dmb {{ishst}}. As I was fixing it, I also added
CHECK-LABELs to make it a bit less brittle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218341 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles using the AVX2 instructions. This is the first step of cutting
in real AVX2 support.
Note that I have spotted at least one bug in the test cases already, but
I suspect it was already present and just is getting surfaced. Will
investigate next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218338 91177308-0d34-0410-b5e6-96231b3b80d8
add VPBLENDD to the InstPrinter's comment generation so we get nice
comments everywhere.
Now that we have the nice comments, I can see the bug introduced by
a silly typo in the commit that enabled VPBLENDD, and have fixed it. Yay
tests that are easy to inspect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218335 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
AtomicExpand already had logic for expanding wide loads and stores on LL/SC
architectures, and for expanding wide stores on CmpXchg architectures, but
not for wide loads on CmpXchg architectures. This patch fills this hole,
and makes use of this new feature in the X86 backend.
Only one functionnal change: we now lose the SynchScope attribute.
It is regrettable, but I have another patch that I will submit soon that will
solve this for all of AtomicExpand (it seemed better to split it apart as it
is a different concern).
Test Plan: make check-all (lots of tests for this functionality already exist)
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5404
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218332 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch makes use of AtomicExpandPass in Power for inserting fences around
atomic as part of an effort to remove fence insertion from SelectionDAGBuilder.
As a big bonus, it lets us use sync 1 (lightweight sync, often used by the mnemonic
lwsync) instead of sync 0 (heavyweight sync) in many cases.
I also added a test, as there was no test for the barriers emitted by the Power
backend for atomic loads and stores.
Test Plan: new test + make check-all
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218331 91177308-0d34-0410-b5e6-96231b3b80d8
VPBLENDD where appropriate even on 128-bit vectors.
According to Agner's tables, this instruction is significantly higher
throughput (can execute on any port) on Haswell chips so we should
aggressively try to form it when available.
Sadly, this loses our delightful shuffle comments. I'll add those back
for VPBLENDD next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218322 91177308-0d34-0410-b5e6-96231b3b80d8
undef in the shuffle mask. This shows up when we're printing comments
during lowering and we still have an IR-level constant hanging around
that models undef.
A nice consequence of this is *much* prettier test cases where the undef
lanes actually show up as undef rather than as a particular set of
values. This also allows us to print shuffle comments in cases that use
undef such as the recently added variable VPERMILPS lowering. Now those
test cases have nice shuffle comments attached with their details.
The shuffle lowering for PSHUFB has been augmented to use undef, and the
shuffle combining has been augmented to comprehend it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218301 91177308-0d34-0410-b5e6-96231b3b80d8
trick that I missed.
VPERMILPS has a non-immediate memory operand mode that allows it to do
asymetric shuffles in the two 128-bit lanes. Use this rather than two
shuffles and a blend.
However, it turns out the variable shuffle path to VPERMILPS (and
VPERMILPD, although that one offers no functional differenc from the
immediate operand other than variability) wasn't even plumbed through
codegen. Do such plumbing so that we can reasonably emit
a variable-masked VPERMILP instruction. Also plumb basic comment parsing
and printing through so that the tests are reasonable.
There are still a few tests which don't show the shuffle pattern. These
are tests with undef lanes. I'll teach the shuffle decoding and printing
to handle undef mask entries in a follow-up. I've looked at the masks
and they seem reasonable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218300 91177308-0d34-0410-b5e6-96231b3b80d8
We manage to generate all of the matching instructions (and a lot more) via
the reciprocal optimization function - even if we completely remove the square
root optimization. With CHECK_NEXT, we assure that we're executing the
expected square root optimization paths and not generating extra insts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218284 91177308-0d34-0410-b5e6-96231b3b80d8
Shift-left immediate with sign-/zero-extensions also works for boolean values.
Update the assert and the test cases to reflect that fact.
This should fix a bug found by Chad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218275 91177308-0d34-0410-b5e6-96231b3b80d8
These are just test cases, no actual code yet. This establishes the
baseline fallback strategy we're starting from on AVX2 and the expected
lowering we use on AVX1.
Also, these test cases are very much generated. I've manually crafted
the specific pattern set that I'm hoping will be useful at exercising
the lowering code, but I've not (and could not) manually verify *all* of
these. I've spot checked and they seem legit to me.
As with the rest of vector shuffling, at a certain point the only really
useful way to check the correctness of this stuff is through fuzz
testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218267 91177308-0d34-0410-b5e6-96231b3b80d8
We generate broadcast instructions on CPUs with AVX2 to load some constant splat vectors.
This patch should preserve all existing behavior with regular optimization levels,
but also use splats whenever possible when optimizing for *size* on any CPU with AVX or AVX2.
The tradeoff is up to 5 extra instruction bytes for the broadcast instruction to save
at least 8 bytes (up to 31 bytes) of constant pool data.
Differential Revision: http://reviews.llvm.org/D5347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218263 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218254.
The global_atomics.ll test fails with asserts disabled. For some reason,
the compiler fails to produce the atomic no return variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218257 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Update segmented-stacks*.ll tests with x32 target case and make
corresponding changes to make them pass.
Test Plan: tests updated with x32 target
Reviewers: nadav, rafael, dschuff
Subscribers: llvm-commits, zinovy.nis
Differential Revision: http://reviews.llvm.org/D5245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218247 91177308-0d34-0410-b5e6-96231b3b80d8
The PSHUFB mask decode routine used to assert if the mask index was out of
range (<0 or greater than the size of the vector). The problem is, we can
legitimately have a PSHUFB with a large index using intrinsics. The
instruction only uses the least significant 4 bits. This change removes the
assert and masks the index to match the instruction behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218242 91177308-0d34-0410-b5e6-96231b3b80d8
Increasingly I don't want to mix the integer and floating point tests,
especially with AVX where they are handled quite differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218233 91177308-0d34-0410-b5e6-96231b3b80d8
a more sane approach to AVX2 support.
Fundamentally, there is no useful way to lower integer vectors in AVX.
None. We always end up with a VINSERTF128 in the end, so we might as
well eagerly switch to the floating point domain and do everything
there. This cleans up lots of weird and unlikely to be correct
differences between integer and floating point shuffles when we only
have AVX1.
The other nice consequence is that by doing things this way we will make
it much easier to write the integer lowering routines as we won't need
to duplicate the logic to check for AVX vs. AVX2 in each one -- if we
actually try to lower a 256-bit vector as an integer vector, we have
AVX2 and can rely on it. I think this will make the code much simpler
and more comprehensible.
Currently, I've disabled *all* support for AVX2 so that we always fall
back to AVX. This keeps everything working rather than asserting. That
will go away with the subsequent series of patches that provide
a baseline AVX2 implementation.
Please note, I'm going to implement AVX2 *without access to hardware*.
That means I cannot correctness test this path. I will be relying on
those with access to AVX2 hardware to do correctness testing and fix
bugs here, but as a courtesy I'm trying to sketch out the framework for
the new-style vector shuffle lowering in the context of the AVX2 ISA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218228 91177308-0d34-0410-b5e6-96231b3b80d8
input v8f32 shuffles which are not 128-bit lane crossing but have
different shuffle patterns in the low and high lanes. This removes most
of the extract/insert traffic that was unnecessary and is particularly
good at lowering cases where only one of the two lanes is shuffled at
all.
I've also added a collection of test cases with undef lanes because this
lowering is somewhat more sensitive to undef lanes than others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218226 91177308-0d34-0410-b5e6-96231b3b80d8
in the high and low 128-bit lanes of a v8f32 vector.
No functionality change yet, but wanted to set up the baseline for my
next patch which will make these quite a bit better. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218224 91177308-0d34-0410-b5e6-96231b3b80d8
lowering when it can use a symmetric SHUFPS across both 128-bit lanes.
This required making the SHUFPS lowering tolerant of other vector types,
and adjusting our canonicalization to canonicalize harder.
This is the last of the clever uses of symmetry I've thought of for
v8f32. The rest of the tricks I'm aware of here are to work around
assymetry in the mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218216 91177308-0d34-0410-b5e6-96231b3b80d8
of a single element into a zero vector for v4f64 and v4i64 in AVX.
Ironically, there is less to see here because xor+blend is so crazy fast
that we can't really beat that to zero the high 128-bit lane.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218214 91177308-0d34-0410-b5e6-96231b3b80d8
UNPCKHPS with AVX vectors by recognizing those patterns when they are
repeated for both 128-bit lanes.
With this, we now generate the exact same (really nice) code for
Quentin's avx_test_case.ll which was the most significant regression
reported for the new shuffle lowering. In fact, I'm out of specific test
cases for AVX lowering, the rest were AVX2 I think. However, there are
a bunch of pretty obvious remaining things to improve with AVX...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218213 91177308-0d34-0410-b5e6-96231b3b80d8
important bits of cleverness: to detect and lower repeated shuffle
patterns between the two 128-bit lanes with a single instruction.
This patch just teaches it how to lower single-input shuffles that fit
this model using VPERMILPS. =] There is more that needs to happen here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218211 91177308-0d34-0410-b5e6-96231b3b80d8
generating the test cases to format things more consistently and
actually catch all the operand sequences that should be elided in favor
of the asm comments. No actual changes here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218210 91177308-0d34-0410-b5e6-96231b3b80d8
VBLENDPD over using VSHUFPD. While the 256-bit variant of VBLENDPD slows
down to the same speed as VSHUFPD on Sandy Bridge CPUs, it has twice the
reciprocal throughput on Ivy Bridge CPUs much like it does everywhere
for 128-bits. There isn't a downside, so just eagerly use this
instruction when it suffices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218208 91177308-0d34-0410-b5e6-96231b3b80d8
This expands the integer cases to cover the fact that AVX2 moves their
lane-crossing shuffles into the integer domain. It also adds proper
support for AVX2 run lines and the "ALL" group when it doesn't matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218206 91177308-0d34-0410-b5e6-96231b3b80d8
actual support for complex AVX shuffling tricks. We can do independent
blends of the low and high 128-bit lanes of an avx vector, so shuffle
the inputs into place and then do the blend at 256 bits. This will in
many cases remove one blend instruction.
The next step is to permute the low and high halves in-place rather than
extracting them and re-inserting them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218202 91177308-0d34-0410-b5e6-96231b3b80d8
under AVX.
This really just documents the current state of the world. I'm going to
try to flesh it out to cover any test cases I plan to improve prior to
improving them so that the delta made by changes is actually visible to
code reviewers.
This is made easier by the fact that I now have a script to automate the
process of producing test cases including the check lines. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218199 91177308-0d34-0410-b5e6-96231b3b80d8
single-input shuffles with doubles. This allows them to fold memory
operands into the shuffle, etc. This is just the analog to the v4f32
case in my prior commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218193 91177308-0d34-0410-b5e6-96231b3b80d8
instruction for single-vector floating point shuffles. This in turn
allows the shuffles to fold a load into the instruction which is one of
the common regressions hit with the new shuffle lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218190 91177308-0d34-0410-b5e6-96231b3b80d8
duplication of check lines. The idea is to have broad sets of
compilation modes that will frequently diverge without having to always
and immediately explode to the precise ISA feature set.
While this already helps due to VEX encoded differences, it will help
much more as I teach the new shuffle lowering about more of the new VEX
encoded instructions which can still be used to implement 128-bit
shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218188 91177308-0d34-0410-b5e6-96231b3b80d8
tricky case of single-element insertion into the zero lane of a zero
vector.
We can't just use the same pattern here as we do in every other vector
type because the general insertion logic can handle insertion into the
non-zero lane of the vector. However, in SSE4.1 with v4f32 vectors we
have INSERTPS that is a much better choice than the generic one for such
lowerings. But INSERTPS can do lots of other lowerings as well so
factoring its logic into the general insertion logic doesn't work very
well. We also can't just extract the core common part of the general
insertion logic that is faster (forming VZEXT_MOVL synthetic nodes that
lower to MOVSS when they can) because VZEXT_MOVL is often *faster* than
a blend while INSERTPS is slower! So instead we do a restrictive
condition on attempting to use the generic insertion logic to narrow it
to those cases where VZEXT_MOVL won't need a shuffle afterward and thus
will do better than INSERTPS. Then we try blending. Then we go back to
INSERTPS.
This still doesn't generate perfect code for some silly reasons that can
be fixed by tweaking the td files for lowering VZEXT_MOVL to use
XORPS+BLENDPS when available rather than XORPS+MOVSS when the input ends
up in a register rather than a load from memory -- BLENDPSrr has twice
the reciprocal throughput of MOVSSrr. Don't you love this ISA?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218177 91177308-0d34-0410-b5e6-96231b3b80d8
floating point types and use it for both v2f64 and v2i64 single-element
insertion lowering.
This fixes the last non-AVX performance regression test case I've gotten
of for the new vector shuffle lowering. There is obvious analogous
lowering for v4f32 that I'll add in a follow-up patch (because with
INSERTPS, v4f32 requires special treatment). After that, its AVX stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218175 91177308-0d34-0410-b5e6-96231b3b80d8
When looking through sign/zero-extensions the code would always assume there is
such an extension instruction and use the wrong operand for the address.
There was also a minor issue in the handling of 'AND' instructions. I
accidentially used a 'cast' instead of a 'dyn_cast'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218161 91177308-0d34-0410-b5e6-96231b3b80d8
lowering to support both anyext and zext and to custom lower for many
different microarchitectures.
Using this allows us to get *exactly* the right code for zext and anyext
shuffles in all the vector sizes. For v16i8, the improvement is *huge*.
The new SSE2 test case added I refused to add before this because it was
sooooo muny instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218143 91177308-0d34-0410-b5e6-96231b3b80d8
The heuristic used by DAGCombine to form FMAs checks that the FMUL has only one
use, but this is overly-conservative on some systems. Specifically, if the FMA
and the FADD have the same latency (and the FMA does not compete for resources
with the FMUL any more than the FADD does), there is no need for the
restriction, and furthermore, forming the FMA leaving the FMUL can still allow
for higher overall throughput and decreased critical-path length.
Here we add a new TLI callback, enableAggressiveFMAFusion, false by default, to
elide the hasOneUse check. This is enabled for PowerPC by default, as most
PowerPC systems will benefit.
Patch by Olivier Sallenave, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218120 91177308-0d34-0410-b5e6-96231b3b80d8
to undef lanes as well as defined widenable lanes. This dramatically
improves the lowering we use for undef-shuffles in a zext-ish pattern
for SSE2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218115 91177308-0d34-0410-b5e6-96231b3b80d8
Not sure why I only did SSSE3 here. Also, I've left out some of the SSE2
ones because the shuffles are so absurd it's not worth transcribing
them. Will try to fix them to be sane and then check them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218114 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles that are zext-ing.
Not a lot to see here; the undef lane variant is better handled with
pshufd, but this improves the actual zext pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218112 91177308-0d34-0410-b5e6-96231b3b80d8
to the new vector shuffle lowering code.
This allows us to emit PMOVZX variants consistently for patterns where
it is a viable lowering. This instruction is both fast and allows us to
fold loads into it. This only hooks the new lowering up for i16 and i8
element widths, mostly so I could manage the change to the tests. I'll
add the i32 one next, although it is significantly less interesting.
One thing to note is that we already had some tests for these patterns
but those tests had far less horrible instructions. The problem is that
those tests weren't checking the strict start and end of the instruction
sequence. =[ As a consequence something changed in the lowering making
us generate *TERRIBLE* code for these patterns in SSE2 through SSSE3.
I've consolidated all of the tests and spelled out the madness that we
currently emit for these shuffles. I'm going to try to figure out what
has gone wrong here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218102 91177308-0d34-0410-b5e6-96231b3b80d8
With this optimization, we will not always insert zext for values crossing
basic blocks, but insert sext if the users of a value crossing basic block
has preference of sign predicate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218101 91177308-0d34-0410-b5e6-96231b3b80d8
The fix is slightly different then x86 (see r216117) because the number of values
attached to a return can vary even for a single returned value (e.g., f64 yields
two returned values).
<rdar://problem/18352998>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218076 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch was originally in D5304 (I could not find a way to reopen that revision).
It was accepted, commited and broke the build bots because the overloading of
the constructor of ArrayRef for braced initializer lists is not supported by all
toolchains. I then reverted it, and propose this fixed version that uses a plain
C array instead in makeDMB (that array is then converted implicitly to an
ArrayRef, but that is not behind an ifdef). Could someone confirm me whether
initialization lists for plain C arrays are supported by every toolchain used
to build llvm ? Otherwise I can just initialize the array in the old way:
args[0] = ...; .. ; args[5] = ...;
Below is the description of the original patch:
```
I had only tested this code for ARMv7 and ARMv8. This patch adds several
fallback paths if the processor does not support dmb ish:
- dmb sy if a cortex-M with support for dmb
- mcr p15, #0, r0, c7, c10, #5 for ARMv6 (special instruction equivalent to a DMB)
These fallback paths were chosen based on the code for fence seq_cst.
Thanks to luqmana for having noticed this bug.
```
Test Plan: Added more cases to atomic-load-store.ll + make check-all
Reviewers: jfb, t.p.northover, luqmana
Subscribers: llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D5386
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218066 91177308-0d34-0410-b5e6-96231b3b80d8
There is no purpose in using it for single-input shuffles as
pshufd is just as fast and doesn't tie the two operands. This removes
a substantial amount of wrong-domain blend operations in SSSE3 mode. It
also completes the usage of PALIGNR for integer shuffles and addresses
one of the test cases Quentin hit with the new vector shuffle lowering.
There is still the question of whether and when to use this for floating
point shuffles. It is faster than shufps or shufpd but in the integer
domain. I don't yet really have a good heuristic here for when to use
this instruction for floating point vectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218038 91177308-0d34-0410-b5e6-96231b3b80d8
When folding the intrinsic flag into the branch or select we also have to
consider the fact if the intrinsic got simplified, because it changes the
flag we have to check for.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218034 91177308-0d34-0410-b5e6-96231b3b80d8
Small optimization in 'simplifyAddress'. When the offset cannot be encoded in
the load/store instruction, then we need to materialize the address manually.
The add instruction can encode a wider range of immediates than the load/store
instructions. This change tries to fold the offset into the add instruction
first before materializing the offset in a register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218031 91177308-0d34-0410-b5e6-96231b3b80d8
The 'AND' instruction could be used to mask out the lower 32 bits of a register.
If this is done inside an address computation we might be able to fold the
instruction into the memory instruction itself.
and x1, x1, #0xffffffff ---> ldrb x0, [x0, w1, uxtw]
ldrb x0, [x0, x1]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218030 91177308-0d34-0410-b5e6-96231b3b80d8
PALIGNR. This just adds it to the v8i16 and v16i8 lowering steps where
it is completely unmatched. It also introduces the logic for detecting
rotation shuffle masks even in the presence of single input or blend
masks and arbitrarily undef lanes.
I've added fairly comprehensive tests for the matching logic in v8i16
because the tests at that size are much easier to write and manage.
I've not checked the SSE2 code generated for these tests because the
code is *horrible*. It is absolute madness. Testing it will just make
the test brittle without giving any interesting improvements in the
correctness confidence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218013 91177308-0d34-0410-b5e6-96231b3b80d8
For PPC targets, FastISel does not take the sign extension information into account when selecting return instructions whose operands are constants. A consequence of this is that the return of boolean values is not correct. This patch fixes the problem by evaluating the sign extension information also for constants, forwarding this information to PPCMaterializeInt which takes this information to drive the sign extension during the materialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217993 91177308-0d34-0410-b5e6-96231b3b80d8
Emit an optimized instruction sequence for sdiv by power-of-2 depending on the
exact flag.
This fixes rdar://problem/18224511.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217986 91177308-0d34-0410-b5e6-96231b3b80d8
Try to fold the multiply into the add/sub or logical operations (when
possible).
This is related to rdar://problem/18369687.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217978 91177308-0d34-0410-b5e6-96231b3b80d8
Teach 'computeAddress' to also fold multiplies into the address computation
(when possible).
This fixes rdar://problem/18369443.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217977 91177308-0d34-0410-b5e6-96231b3b80d8
It is breaking the build on the buildbots but works fine on my machine, I revert
while trying to understand what happens (it appears to depend on the compiler used
to build, I probably used a C++11 feature that is not perfectly supported by some
of the buildbots).
This reverts commit feb3176c4d006f99af8b40373abd56215a90e7cc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217973 91177308-0d34-0410-b5e6-96231b3b80d8
This takes advanatage of the CBZ and CBNZ instruction to further optimize the
common null check pattern into a single instruction.
This is related to rdar://problem/18358882.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217972 91177308-0d34-0410-b5e6-96231b3b80d8
