This was done using the Sparc and PowerPC AsmParsers as guides. So far it
is very simple and only supports sopp instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221994 91177308-0d34-0410-b5e6-96231b3b80d8
The canonical name when printing assembly is still $29. The reason is that
GAS does not accept "$hwr_ulr" at the moment.
This addresses the comments from r221307, which reverted the original
commit r221299.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221685 91177308-0d34-0410-b5e6-96231b3b80d8
The original commit r221299 was reverted in r221307. I removed the name
"hrw_ulr" ($29) from the original commit because two tests were failing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221681 91177308-0d34-0410-b5e6-96231b3b80d8
Referencing one symbol from another in the same section does not
generally require a relocation. However, the MS linker has a feature
called /INCREMENTAL which enables incremental links. It achieves this
by creating thunks to the actual function and redirecting all
relocations to point to the thunk.
This breaks down with the old scheme if you have a function which
references, say, itself. On x86_64, we would use %rip relative
addressing to reference the start of the function from out current
position. This would lead to miscompiles because other references might
reference the thunk instead, breaking function pointer equality.
This fixes PR21520.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221678 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Improved warning message when using .cpload inside a reorder section and added an error message for using .cpload with Mips16 enabled.
Modified the tests to fit with the changes mentioned above, added a test-case for the N32 ABI in cpload.s and did some reformatting to make the tests easier to read.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5465
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221447 91177308-0d34-0410-b5e6-96231b3b80d8
Some ARM FPUs only have 16 double-precision registers, rather than the
normal 32. LLVM represents this with the D16 target feature. This is
currently used by CodeGen to avoid using high registers when they are
not available, but the assembler and disassembler do not.
I fix this in the assmebler and disassembler rather than the
InstrInfo.td files, as the latter would require a large number of
changes everywhere one of the floating-point instructions is referenced
in the backend. This solution is similar to the one used for
co-processor numbers and MSR masks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221341 91177308-0d34-0410-b5e6-96231b3b80d8
We were producing a relocation for
----------------
.section foo,bar
La:
Lb:
.long La-Lb
--------------
but not for
---------------------
.section foo,bar
zed:
La:
Lb:
.long La-Lb
----------------
This patch handles the case where both fragments are part of the first atom
in a section and there is no corresponding symbol to that atom.
This fixes pr21328.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221304 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Appropriately set/clear the FeatureBit for Mips16 when these assembler directives are used and also emit ".set nomips16" (previously, only ".set mips16" was being emitted).
These improvements allow for better testing of the .cpload/.cprestore assembler directives (which are not supposed to work when Mips16 is enabled).
Test Plan: The test is bare-bones because there are no MC tests for Mips16 instructions (there's only one, which checks that the Mips16 ELF header flag gets set), and that suggests to me that it has not been implemented yet in the IAS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5462
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221277 91177308-0d34-0410-b5e6-96231b3b80d8
test/MC/ARM/directive-eabi_attribute.s was missing several tests of object file
encodings relative to the existing tests for assembly file encodings. This
commit adds the missing tests.
Change-Id: Ie110ca02b65e8f4d4c77f437bd09d03607fa5c0d
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221250 91177308-0d34-0410-b5e6-96231b3b80d8
This CPU definition is redundant. The Cortex-A9 is defined as
supporting multiprocessing extensions. Remove its definition and
update appropriate tests.
LLVM defines both a cortex-a9 CPU and a cortex-a9-mp CPU. The only
difference between the two CPU definitions in ARM.td is that
cortex-a9-mp contains the feature FeatureMP for multiprocessing
extensions.
This is redundant since the Cortex-A9 is defined as having
multiprocessing extensions in the TRMs. armcc also defines the
Cortex-A9 as having multiprocessing extensions by default.
Change-Id: Ifcadaa6c322be0a33d9d2a39cfdd7da1d75981a7
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221166 91177308-0d34-0410-b5e6-96231b3b80d8
test/MC/ARM/directive-eabi_attribute.s had gotten out-of-sync with
test/MC/ARM/directive-eabi_attribute-2.s. The former tests the encoding of
build attributes in object files, and the latter the encoding in assembly
files. Since both these tests need to be updated at the same time, it makes
sense to combine them into a single test. The object file encodings are being
checked against the ouput of -arm-attributes rather than by direct byte
comparisons which makes for easier reading.
Change-Id: I0075de506ae5626fb2fa235383fe5ce6a65a15a9
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221155 91177308-0d34-0410-b5e6-96231b3b80d8
This is implemented via a multiclass that derives from the vperm imm
multiclass.
Fixes <rdar://problem/18426089>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220737 91177308-0d34-0410-b5e6-96231b3b80d8
In a Mach-O object file a relocatable expression of the form
SymbolA - SymbolB + constant is allowed when both symbols are
defined in a section. But when either symbol is undefined it
is an error.
The code was crashing when it had an undefined symbol in this case.
And should have printed a error message using the location information
in the relocation entry.
rdar://18678402
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220599 91177308-0d34-0410-b5e6-96231b3b80d8
This is asm/diasm-only support, similar to AVX.
For ISeling the register variant, they are no different from 213 other than
whether the multiplication or the addition operand is destructed.
For ISeling the memory variant, i.e. to fold a load, they are no different
than the 132 variant. The addition operand (op3) in both cases can come from
memory. Again the ony difference is which operand is destructed.
There could be a post-RA pass that would convert a 213 or 132 into a 231.
Part of <rdar://problem/17082571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220540 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, the ARM disassembler will disassemble the Thumb2 memory hint
instructions (PLD, PLDW and PLI), even for targets which do not have
these instructions. This patch adds the required checks to the
disassmebler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220472 91177308-0d34-0410-b5e6-96231b3b80d8
After r220439 the behavior of labels in bundle-align mode changed,
and I neglected to update this test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220447 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently when emitting a label, a new data fragment is created for it if the
current fragment isn't a data fragment.
This change instead enqueues the label and attaches it to the next fragment
(e.g. created for the next instruction) if possible.
When bundle alignment is not enabled, this has no functionality change (it
just results in fewer extra fragments being created). For bundle alignment,
previously labels would point to the beginning of the bundle padding instead
of the beginning of the emitted instruction. This was not only less efficient
(e.g. jumping to the nops instead of past them) but also led to miscalculation
of the address of the GOT (since MC uses a label difference rather than
emitting a "." symbol).
Fixes https://code.google.com/p/nativeclient/issues/detail?id=3982
Test Plan: regression test attached
Reviewers: jvoung, eliben
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D5915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220439 91177308-0d34-0410-b5e6-96231b3b80d8
The 32-bit variants of the NEON scalar<->GPR move instructions are
also available in VFPv2. The 8- and 16-bit variants do require NEON.
Note that the checks in the test file are all -DAG because they are
checking a mixture of stdout and stderr, and the ordering is not
guaranteed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220288 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2 LDRS?[BH] instructions are not valid when the destination
register is the PC (these encodings are used for preload hints).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220278 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference from r219829 is using
getOrCreateSectionSymbol(*ELFSec)
instead of
GetOrCreateSymbol(ELFSec->getSectionName())
in ELFObjectWriter which causes us to use the correct section symbol even if
we have multiple sections with the same name.
Original messages:
r219829:
Correctly handle references to section symbols.
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
r219835:
Allow forward references to section symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220021 91177308-0d34-0410-b5e6-96231b3b80d8
Revert "Correctly handle references to section symbols."
Revert "Allow forward references to section symbols."
Rui found a regression I am debugging.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220010 91177308-0d34-0410-b5e6-96231b3b80d8
In AVX512f we support 64x2 and 32x8 inserts via matching them to 32x4 and 64x4
respectively. These are matched by "Alt" Pat<>'s (Alt stands for alternative
VTs).
Since DQ has native support for these intructions, I peeled off the non-"Alt"
part of the baseclass into vinsert_for_size_no_alt. The DQ instructions are
derived from this multiclass. The "Alt" Pat<>'s are disabled with DQ.
Fixes <rdar://problem/18426089>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219874 91177308-0d34-0410-b5e6-96231b3b80d8
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219829 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently an error is thrown if bundle alignment mode is set more than once
per module (either via the API or the .bundle_align_mode directive). This
change allows setting it multiple times as long as the alignment doesn't
change.
Also nested bundle_lock groups are currently not allowed. This change allows
them, with the effect that the group stays open until all nests are exited,
and if any of the bundle_lock directives has the align_to_end flag, the
group becomes align_to_end.
These changes make the bundle aligment simpler to use in the compiler, and
also better match the corresponding support in GNU as.
Reviewers: jvoung, eliben
Differential Revision: http://reviews.llvm.org/D5801
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219811 91177308-0d34-0410-b5e6-96231b3b80d8
The VSX instruction definitions for lxsdx, lxvd2x, lxvdsx, and lxvw4x
incorrectly use the XForm_1 instruction format, rather than the
XX1Form instruction format. This is likely a pasto when creating
these instructions, which were based on lvx and so forth. This patch
uses the correct format.
The existing reformatting test (test/MC/PowerPC/vsx.s) missed this
because the two formats differ only in that XX1Form has an extension
to the target register field in bit 31. The tests for these
instructions used a target register of 7, so the default of 0 in bit
31 for XForm_1 didn't expose a problem. For register numbers 32-63
this would be noticeable. I've changed the test to use higher
register numbers to verify my change is effective.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219416 91177308-0d34-0410-b5e6-96231b3b80d8
These derive from the new asm-only masking definitions.
Unfortunately I wasn't able to find a ISel pattern that we could legally
generate for the masking variants. The problem is that since the destination
is v4* we would need VK4 register classes and v4i1 value types to express the
masking. These are however not legal types/classes in AVX512f but only in VL,
so things get complicated pretty quickly. We can revisit this question later
if we have a more pressing need to express something like this.
So the ISel patterns are empty for the masking instructions and the next patch
will add Pat<>s instead to match the intrinsics calls with instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219361 91177308-0d34-0410-b5e6-96231b3b80d8
COFF normally doesn't allow us to describe the alignment of COMMON
symbols.
It turns out that most linkers use the symbol size as a hint as to how
aligned the symbol should be.
However the BFD folks have added a .drectve command, which we
now support as of r219229, that allows us to specify the alignment
precisely. With this in mind, stop rounding sizes up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219281 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU linker supports an -aligncomm directive that allows for power-of-2
alignment of common data. Add support to emit this directive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219229 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, this isn't easy to fix since there's no simple way to figure out from the disassembler tables whether the W-bit is being used to select a 64-bit GPR or if its a required part of the opcode. The fix implemented here just looks for "64" in the instruction name and ignores the W-bit in 32-bit mode if its present.
Fixes PR21169.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219194 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219010 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The register names t4-t7 are not available in the N32 and N64 ABIs.
This patch prints a warning, when those names are used in N32/64,
along with a fix-it with the correct register names.
Patch by Vasileios Kalintiris
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5272
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218989 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218914 91177308-0d34-0410-b5e6-96231b3b80d8
The A64 instruction set includes a generic register syntax for accessing
implementation-defined system registers. The syntax for these registers is:
S<op0>_<op1>_<CRn>_<CRm>_<op2>
The encoding space permitted for implementation-defined system registers
is:
op0 op1 CRn CRm op2
11 xxx 1x11 xxxx xxx
The full encoding space can now be accessed:
op0 op1 CRn CRm op2
xx xxx xxxx xxxx xxx
This is useful to anyone needing to write assembly code supporting new
system registers before the assembler has learned the official names for
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218753 91177308-0d34-0410-b5e6-96231b3b80d8
Users of getSectionContents shouldn't try to pass in BSS or virtual
sections. In all instances, this is a bug in the code calling this
routine.
N.B. Some COFF implementations (like CL) will mark their BSS sections as
taking space on disk. This would confuse COFFObjectFile into thinking
the section is larger than the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218549 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the ARM backend transform 3 operand instructions such as
'adds/subs' to the 2 operand version of the same instruction if the first
two register operands are the same.
Example: 'adds r0, r0, #1' will is transformed to 'adds r0, #1'.
Currently for some instructions such as 'adds' if you try to assemble
'adds r0, r0, #8' for thumb v6m the assembler would throw an error message
because the immediate cannot be encoded using 3 bits.
The backend should be smart enough to transform the instruction to
'adds r0, #8', which allows for larger immediate constants.
Patch by Ranjeet Singh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218521 91177308-0d34-0410-b5e6-96231b3b80d8
On ARM NEON, VAND with immediate (16/32 bits) is an alias to VBIC ~imm with
the same type size. Adding that logic to the parser, and generating VBIC
instructions from VAND asm files.
This patch also fixes the validation routines for NEON splat immediates which
were wrong.
Fixes PR20702.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218450 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2 BXJ instruction (Branch and Exchange Jazelle) is not
defined for v7M or v8A. It is defined for all other Thumb2-supporting
architectures (v6T2, v7A and v7R).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218445 91177308-0d34-0410-b5e6-96231b3b80d8
Nico Rieck added support for this 32-bit COFF relocation some time ago
for Win64 stuff. It appears that as an oversight, the assembly output
used "foo"@IMGREL32 instead of "foo"@IMGREL, which is what we can parse.
Sadly, there were actually tests that took in IMGREL and put out
IMGREL32, and we didn't notice the inconsistency. Oh well. Now LLVM can
assemble it's own output with slightly more fidelity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218437 91177308-0d34-0410-b5e6-96231b3b80d8
v7M only allows the 16-bit encoding of the 'cps' (Change Processor
State) instruction, and does not have the 32-bit encoding which is
valid from v6T2 onwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218382 91177308-0d34-0410-b5e6-96231b3b80d8
e.g., add w1, w2, w3, lsl #(2 - 1)
This sort of thing comes up in pre-processed assembly playing macro games.
Still validate that it's an assembly time constant. The early exit error check
was just a bit overzealous and disallowed a left paren.
rdar://18430542
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218336 91177308-0d34-0410-b5e6-96231b3b80d8
We currently emit an error when trying to assemble a file with more
than one section using DWARF2 debug info. This should be a warning
instead, as the resulting file will still be usable, but with a
degraded debug illusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218241 91177308-0d34-0410-b5e6-96231b3b80d8
link.exe:
Fuzz testing has shown that COMMON symbols with size > 32 will always
have an alignment of at least 32 and all symbols with size < 32 will
have an alignment of at least the largest power of 2 less than the size
of the symbol.
binutils:
The BFD linker essentially work like the link.exe behavior but with
alignment 4 instead of 32. The BFD linker also supports an extension to
COFF which adds an -aligncomm argument to the .drectve section which
permits specifying a precise alignment for a variable but MC currently
doesn't support editing .drectve in this way.
With all of this in mind, we decide to play a little trick: we can
ensure that the alignment will be respected by bumping the size of the
global to it's alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218201 91177308-0d34-0410-b5e6-96231b3b80d8
We had a few bugs:
- We were considering the GVKind instead of just looking at the section
characteristics
- We would never print out 'y' when a section was meant to be unreadable
- We would never print out 's' when a section was meant to be shared
- We translated IMAGE_SCN_MEM_DISCARDABLE to 'n' when it should've meant
IMAGE_SCN_LNK_REMOVE
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218189 91177308-0d34-0410-b5e6-96231b3b80d8
A problem with our old behavior becomes observable under x86-64 COFF
when we need a read-only GV which has an initializer which is referenced
using a relocation: we would mark the section as writable. Marking the
section as writable interferes with section merging.
This fixes PR21009.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218179 91177308-0d34-0410-b5e6-96231b3b80d8
Certain directives are unsupported on Windows (some of which could/should be
supported). We would not diagnose the use but rather crash during the emission
as we try to access the Target Streamer. Add an assertion to prevent creating a
NULL reference (which is not permitted under C++) as well as a test to ensure
that we can diagnose the disabled directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218014 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than relying on support for a specific directive to determine if we are
targeting MachO, explicitly check the output format.
As an additional bonus, cleanup the caret diagnostic for the non-MachO case and
avoid the spurious error caused by not discarding the statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218012 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Changed error messages to be more informative and to resemble other clang/llvm error messages (first letter is lower case, no ending punctuation) and updated corresponding tests.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5065
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217873 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for reading the "bigobj" variant of COFF produced by
cl's /bigobj and mingw's -mbig-obj.
The most significant difference that bigobj brings is more than 2**16
sections to COFF.
bigobj brings a few interesting differences with it:
- It doesn't have a Characteristics field in the file header.
- It doesn't have a SizeOfOptionalHeader field in the file header (it's
only used in executable files).
- Auxiliary symbol records have the same width as a symbol table entry.
Since symbol table entries are bigger, so are auxiliary symbol
records.
Write support will come soon.
Differential Revision: http://reviews.llvm.org/D5259
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217496 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds aliases for the sync instruction (synciobdma,
syncs, syncw, syncws) which are used by the Octeon CPU.
Reviewed by D. Sanders
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217477 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is used to reset the assembler options to their initial values.
Assembly programmers use it in conjunction with the ".set mipsX" directives.
This patch depends on the .set push/pop directive (http://reviews.llvm.org/D4821).
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4957
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217438 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These directives are used to save the current assembler options (in the case of ".set push") and restore the previously saved options (in the case of ".set pop").
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4821
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217432 91177308-0d34-0410-b5e6-96231b3b80d8
parsing (and latent bug in the instruction definitions).
This is effectively a revert of r136287 which tried to address
a specific and narrow case of immediate operands failing to be accepted
by x86 instructions with a pretty heavy hammer: it introduced a new kind
of operand that behaved differently. All of that is removed with this
commit, but the test cases are both preserved and enhanced.
The core problem that r136287 and this commit are trying to handle is
that gas accepts both of the following instructions:
insertps $192, %xmm0, %xmm1
insertps $-64, %xmm0, %xmm1
These will encode to the same byte sequence, with the immediate
occupying an 8-bit entry. The first form was fixed by r136287 but that
broke the prior handling of the second form! =[ Ironically, we would
still emit the second form in some cases and then be unable to
re-assemble the output.
The reason why the first instruction failed to be handled is because
prior to r136287 the operands ere marked 'i32i8imm' which forces them to
be sign-extenable. Clearly, that won't work for 192 in a single byte.
However, making thim zero-extended or "unsigned" doesn't really address
the core issue either because it breaks negative immediates. The correct
fix is to make these operands 'i8imm' reflecting that they can be either
signed or unsigned but must be 8-bit immediates. This patch backs out
r136287 and then changes those places as well as some others to use
'i8imm' rather than one of the extended variants.
Naturally, this broke something else. The custom DAG nodes had to be
updated to have a much more accurate type constraint of an i8 node, and
a bunch of Pat immediates needed to be specified as i8 values.
The fallout didn't end there though. We also then ceased to be able to
match the instruction-specific intrinsics to the instructions so
modified. Digging, this is because they too used i32 rather than i8 in
their signature. So I've also switched those intrinsics to i8 arguments
in line with the instructions.
In order to make the intrinsic adjustments of course, I also had to add
auto upgrading for the intrinsics.
I suspect that the intrinsic argument types may have led everything down
this rabbit hole. Pretty happy with the result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217310 91177308-0d34-0410-b5e6-96231b3b80d8
This commit was reverted in r217183, but is OK to go in again now that its dependency is commited (as of r217186).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217231 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 93c7e6161e1adbd2c7ac81fa081823183035cb64.
This commit got approved first, but was dependant on another one going in (The one pretty printing attribute values). I'll reapply when the other one is in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217183 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes a long standing issue where we would emit many little .text
sections and only one .pdata and .xdata section. Now we generate one
.pdata / .xdata pair per .text section and associate them correctly.
Fixes PR19667.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5181
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217176 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the printing of more load commands, so that the normal load commands
in a typical X86 Mach-O executable can all be printed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217172 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements a few changes related to the Thumb2 M-class MSR instruction:
* better handling of unpredictable encodings,
* recognition of the _g and _nzcvqg variants by the asm parser only if the DSP
extension is available, preferred output of MSR APSR moves with the _<bits>
suffix for v7-M.
Patch by Petr Pavlu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216874 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions like 'fxsave' and control flow instructions like 'jne'
match any operand size. The loop I added to the Intel syntax matcher
assumed that using a different size would give a different instruction.
Now it handles the case where we get the same instruction for different
memory operand sizes.
This also allows us to remove the hack we had for unsized absolute
memory operands, because we can successfully match things like 'jnz'
without reporting ambiguity. Removing this hack uncovered test case
involving 'fadd' that was ambiguous. The memory operand could have been
single or double precision.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216604 91177308-0d34-0410-b5e6-96231b3b80d8
The existing matcher has lots of AT&T assembly dialect assumptions baked
into it. In particular, the hack for resolving the size of a memory
operand by appending the four most common suffixes doesn't work at all.
The Intel assembly dialect mnemonic table has ambiguous entries, so we
need to try matching multiple times with different operand sizes, since
that's the only way to choose different instruction variants.
This makes us more compatible with gas's implementation of Intel
assembly syntax. MSVC assumes you want byte-sized operations for the
instructions that we reject as ambiguous.
Reviewed By: grosbach
Differential Revision: http://reviews.llvm.org/D4747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216481 91177308-0d34-0410-b5e6-96231b3b80d8
Adds code generation support for dcbtst (data cache prefetch for write) and
icbt (instruction cache prefetch for read - Book E cores only).
We still end up with a 'cannot select' error for the non-supported prefetch
intrinsic forms. This will be fixed in a later commit.
Fixes PR20692.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216339 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is similar to ".set mipsX".
It is used to change the CPU target of the assembler, enabling it to accept instructions for a specific CPU.
This patch only implements the r4000 CPU (which is treated internally as generic mips3) and the generic ISAs.
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215978 91177308-0d34-0410-b5e6-96231b3b80d8
It causes a number of regressions when -fintegrated-as is enabled. This happens
because there are codegen-only instructions that incorrectly uses the first
operand as the encoding for the $fcc register. The regressions do not occur when
-via-file-asm is also given.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215847 91177308-0d34-0410-b5e6-96231b3b80d8
This was a thinko. The intent was to flip the explicit bits that need toggling
rather than all bits. This would result in incorrect behaviour (which now is
tested).
Thanks to Nico Weber for pointing this out!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215846 91177308-0d34-0410-b5e6-96231b3b80d8
These are system-only instructions for CPUs with virtualization
extensions, allowing a hypervisor easy access to all of the various
different AArch32 registers.
rdar://problem/17861345
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215700 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This pseudo-instruction allows the programmer to load an address from a symbolic expression into a register.
Patch by David Chisnall.
His work was sponsored by: DARPA, AFRL
I've made some minor changes to the original, such as improving the formatting and adding some comments, and I've also added a test case.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215630 91177308-0d34-0410-b5e6-96231b3b80d8
As X86MCAsmInfoDarwin uses '##' as CommentString although a single '#' starts a
comment a workaround for this special case is added.
Fixes divisions in constant expressions for the AArch64 assembler and other
targets which use '//' as CommentString.
Patch by Janne Grunau!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215615 91177308-0d34-0410-b5e6-96231b3b80d8
Added avx512_movnt_vl multiclass for handling 256/128-bit forms of instruction.
Added encoding and lowering tests.
Reviewed by Elena Demikhovsky <elena.demikhovsky@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215536 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Matheus Almeida and Toma Tabacu
The lld test failure on the previous attempt to commit was caused by the
addition of the .pdr section causing the offsets it was checking to change.
This has been fixed by removing the .ent/.end directives from that test since
they weren't really needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215535 91177308-0d34-0410-b5e6-96231b3b80d8
For ori, they are unsigned, for addi, signed. Create a new target
expression type to handle this and evaluate Fixups accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215315 91177308-0d34-0410-b5e6-96231b3b80d8
since the operands are actually used on those cores. Provide aliases for
the only documented case in the newer Power ISA speec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215282 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These directives are used to toggle whether the assembler accepts MSA-specific instructions or not.
Patch by Matheus Almeida and Toma Tabacu.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4783
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215099 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR18916. I don't think we need to implement support for either
hybrid syntax. Nobody should write Intel assembly with '%' prefixes on
their registers or AT&T assembly without them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215031 91177308-0d34-0410-b5e6-96231b3b80d8
This is similar to what I did with the two-source permutation recently. (It's
almost too similar so that we should consider generating the masking variants
with some tablegen help.)
Both encoding and intrinsic tests are added as well. For the latter, this is
what the IR that the intrinsic test on the clang side generates.
Part of <rdar://problem/17688758>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214890 91177308-0d34-0410-b5e6-96231b3b80d8
Duplicate the vararg tests for linux and add a tests which mixed
vararg arguments with darwin positional parameters.
Patch by: Janne Grunau <j@jannau.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214799 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch also fixes an issue with the way the Mips assembler enables/disables architecture
features. Before this patch, the assembler never disabled feature bits. For example,
.set mips64
.set mips32r2
would result in the 'OR' of mips64 with mips32r2 feature bits which isn't right.
Unfortunately this isn't trivial to fix because there's not an easy way to clear
feature bits as the algorithm in MCSubtargetInfo (ToggleFeature) only clears the bits
that imply the feature being cleared and not the implied bits by the feature (there's a
better explanation to the code I added).
Patch by Matheus Almeida and updated by Toma Tabacu
Reviewers: vmedic, matheusalmeida, dsanders
Reviewed By: dsanders
Subscribers: tomatabacu, llvm-commits
Differential Revision: http://reviews.llvm.org/D4123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214709 91177308-0d34-0410-b5e6-96231b3b80d8
when let can do the same thing. Keep the 64bit variants as codegen-only.
While they have a different register class, the encoding is the same for
32bit and 64bit mode. Having both present would otherwise confuse the
disassembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214636 91177308-0d34-0410-b5e6-96231b3b80d8
Note: The current code in DecodeMSRMask() rejects the unpredictable A/R MSR mask '0000' with Fail. The code in the patch follows this style and rejects unpredictable M-class MSR masks also with Fail (instead of SoftFail). If SoftFail is preferred in this case then additional changes to ARMInstPrinter (to print non-symbolic masks) and ARMAsmParser (to parse non-symbolic masks) will be needed.
Patch by Petr Pavlu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214505 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM prohibits LDRB/LDRSB instructions with writeback into the destination register. With this commit this constraint is now enforced and we stop assembling LDRH/LDRSH instructions with unpredictable behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214500 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM prohibits LDRH/LDRSH instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling LDRH/LDRSH instructions with unpredictable behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214499 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM prohibits LDR instructions with writeback into the destination register. With this commit this constraint is now enforced and we stop assembling LDR instructions with unpredictable behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214498 91177308-0d34-0410-b5e6-96231b3b80d8
This allows assembling the two new instructions, encls and enclu for the
SKX processor model.
Note the diffs are a bigger than what might think, but to fit the new
MRM_CF and MRM_D7 in things in the right places things had to be
renumbered and shuffled down causing a bit more diffs.
rdar://16228228
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214460 91177308-0d34-0410-b5e6-96231b3b80d8
The subtarget information is the ultimate source of truth for the feature set
that is enabled at this point. We would previously not propagate the feature
information to the subtarget. While this worked for the most part (features
would be enabled/disabled as requested), if another operation that changed the
feature bits was encountered (such as a mode switch via a .arm or .thumb
directive), we would end up resetting the behaviour of the architectural
extensions.
Handling this properly requires a slightly more complicated handling. We need
to check if the feature is now being toggled. If so, only then do we toggle the
features. In return, we no longer have to calculate the feature bits ourselves.
The test changes are mostly to the diagnosis, which is now more uniform (a nice
side effect!). Add an additional test to ensure that we handle this case
properly.
Thanks to Nico Weber for alerting me to this issue!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214057 91177308-0d34-0410-b5e6-96231b3b80d8
This patch minimizes the number of nops that must be emitted on X86 to satisfy
stackmap shadow constraints.
To minimize the number of nops inserted, the X86AsmPrinter now records the
size of the most recent stackmap's shadow in the StackMapShadowTracker class,
and tracks the number of instruction bytes emitted since the that stackmap
instruction was encountered. Padding is emitted (if it is required at all)
immediately before the next stackmap/patchpoint instruction, or at the end of
the basic block.
This optimization should reduce code-size and improve performance for people
using the llvm stackmap intrinsic on X86.
<rdar://problem/14959522>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213892 91177308-0d34-0410-b5e6-96231b3b80d8
This target is identical to the Windows MSVC (and follows Microsoft ABI for C).
Correct the library call setup for this target. The same set of library calls
are missing on this environment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213883 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM prohibits STRH instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling STRH instructions with unpredictable behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213850 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM prohibits STRB instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling STRB instructions with unpredictable behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213750 91177308-0d34-0410-b5e6-96231b3b80d8
There really is no arm64_be: it was a useful fiction to test big-endian support
while both backends existed in parallel, but now the only platform that uses
the name (iOS) doesn't have a big-endian variant, let alone one called
"arm64_be".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213748 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM ARM prohibits STR instructions with writeback into the source register. With this commit this constraint is now enforced and we stop assembling STR instructions with unpredictable behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213745 91177308-0d34-0410-b5e6-96231b3b80d8
Without this, we produce non-extern relocations when targeting older OS X
versions that ld64 can't cope with in the particular context of __eh_frame
sections (who'd want generic relocation-processing anyway?).
This means that an updated linker (ld64 from Xcode 3.2.6 or later) may be
needed when targeting such platforms with a modern version of LLVM, but this is
probably the case anyway and a reasonable requirement.
PR20212, rdar://problem/17544795
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213665 91177308-0d34-0410-b5e6-96231b3b80d8
This abstraction allows us to support the various records that can be placed in
the .MIPS.options section in the future. We currently use it to record register
usage information (the ODK_REGINFO record in our ELF64 spec).
Each .MIPS.options record should subclass MipsOptionRecord and provide an
implementation of EmitMipsOptionRecord.
Patch by Matheus Almeida and Toma Tabacu
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213522 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed in a previous checking to support the .localentry
directive on PowerPC, we need to inspect the actual target symbol
in needsRelocateWithSymbol to make the appropriate decision based
on that symbol's st_other bits.
Currently, needsRelocateWithSymbol does not get the target symbol.
However, it is directly available to its sole caller. This patch
therefore simply extends the needsRelocateWithSymbol by a new
parameter "const MCSymbolData &SD", passes in the target symbol,
and updates all derived implementations.
In particular, in the PowerPC implementation, this patch removes
the FIXME added by the previous checkin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213487 91177308-0d34-0410-b5e6-96231b3b80d8
A second binutils feature needed to support ELFv2 is the .localentry
directive. In the ELFv2 ABI, functions may have two entry points:
one for calling the routine locally via "bl", and one for calling the
function via function pointer (either at the source level, or implicitly
via a PLT stub for global calls). The two entry points share a single
ELF symbol, where the ELF symbol address identifies the global entry
point address, while the local entry point is found by adding a delta
offset to the symbol address. That offset is encoded into three
platform-specific bits of the ELF symbol st_other field.
The .localentry directive instructs the assembler to set those fields
to encode a particular offset. This is typically used by a function
prologue sequence like this:
func:
addis r2, r12, (.TOC.-func)@ha
addi r2, r2, (.TOC.-func)@l
.localentry func, .-func
Note that according to the ABI, when calling the global entry point,
r12 must be set to point the global entry point address itself; while
when calling the local entry point, r2 must be set to point to the TOC
base. The two instructions between the global and local entry point in
the above example translate the first requirement into the second.
This patch implements support in the PowerPC MC streamers to emit the
.localentry directive (both into assembler and ELF object output), as
well as support in the assembler parser to parse that directive.
In addition, there is another change required in MC fixup/relocation
handling to properly deal with relocations targeting function symbols
with two entry points: When the target function is known local, the MC
layer would immediately handle the fixup by inserting the target
address -- this is wrong, since the call may need to go to the local
entry point instead. The GNU assembler handles this case by *not*
directly resolving fixups targeting functions with two entry points,
but always emits the relocation and relies on the linker to handle
this case correctly. This patch changes LLVM MC to do the same (this
is done via the processFixupValue routine).
Similarly, there are cases where the assembler would normally emit a
relocation, but "simplify" it to a relocation targeting a *section*
instead of the actual symbol. For the same reason as above, this
may be wrong when the target symbol has two entry points. The GNU
assembler again handles this case by not performing this simplification
in that case, but leaving the relocation targeting the full symbol,
which is then resolved by the linker. This patch changes LLVM MC
to do the same (via the needsRelocateWithSymbol routine).
NOTE: The method used in this patch is overly pessimistic, since the
needsRelocateWithSymbol routine currently does not have access to the
actual target symbol, and thus must always assume that it might have
two entry points. This will be improved upon by a follow-on patch
that modifies common code to pass the target symbol when calling
needsRelocateWithSymbol.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213485 91177308-0d34-0410-b5e6-96231b3b80d8
ELFv2 binaries are marked by a bit in the ELF header e_flags field.
A new assembler directive .abiversion can be used to set that flag.
This patch implements support in the PowerPC MC streamers to emit the
.abiversion directive (both into assembler and ELF binary output),
as well as support in the assembler parser to parse the .abiversion
directive.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213484 91177308-0d34-0410-b5e6-96231b3b80d8
This adds initial support for PPC32 ELF PIC (Position Independent Code; the
-fPIC variety), thus rectifying a long-standing deficiency in the PowerPC
backend.
Patch by Justin Hibbits!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213427 91177308-0d34-0410-b5e6-96231b3b80d8
On AArch64 the pseudo instruction ldr <reg>, =... supports both
32-bit and 64-bit constants. Add support for 64 bit constants for
the pools to support the pseudo instruction fully.
Changes the AArch64 ldr-pseudo tests to use 32-bit registers and
adds tests with 64-bit registers.
Patch by Janne Grunau!
Differential Revision: http://reviews.llvm.org/D4279
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213387 91177308-0d34-0410-b5e6-96231b3b80d8
There are two parts here. First is to modify tablegen to adjust the encoding
type ENCODING_RM with the scaling factor.
The second is to use the new encoding types to compute the correct
displacement in the decoder.
Fixes <rdar://problem/17608489>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213281 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Generally speaking, mips-* vs mips64-* should not be used to make decisions
about the content or format of the ELF. This should be based on the ABI
and CPU in use. For example, `mips-linux-gnu-clang -mips64r2 -mabi=64`
should produce an ELF64 as should `mips64-linux-gnu-clang -mabi=64`.
Conversely, `mips64-linux-gnu-clang -mabi=n32` should produce an ELF32 as
should `mips-linux-gnu-clang -mips64r2 -mabi=n32`.
This patch fixes the e_flags but leaves the ELF32 vs ELF64 issue for now
since there is no apparent way to base this decision on the ABI and CPU.
Differential Revision: http://reviews.llvm.org/D4539
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213244 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The cpr1_size field describes the minimum register width to run the program
rather than the size of the registers on the target. MIPS32r6 was acting
as if -mfp64 has been given because it starts off with 64-bit FPU registers.
Differential Revision: http://reviews.llvm.org/D4538
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213243 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These options are not implemented yet but we act as if they are always
given.
The integrated assembler is driven by the clang driver so the e_flag test
cases should match the e_flags emitted by GCC+GAS rather than GAS
by itself.
Differential Revision: http://reviews.llvm.org/D4536
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213242 91177308-0d34-0410-b5e6-96231b3b80d8
LDP is unpredictable if the registers in the pair are identical, these tests check that we don't assemble instructions like that and error out instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213074 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
.bss, .text, and .data are at least 16-byte aligned.
.reginfo is 4-byte aligned and has a 24-byte EntrySize.
.MIPS.abiflags has an 24-byte EntrySize.
.MIPS.options is 8-byte aligned and has 1-byte EntrySize.
Using a 1-byte EntrySize for .MIPS.options seems strange because the
records are neither 1-byte long nor fixed-length but this matches the value
that GAS emits.
Differential Revision: http://reviews.llvm.org/D4487
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212939 91177308-0d34-0410-b5e6-96231b3b80d8
MC was aping a binutils bug where aliases would default their linkage to
private instead of internal.
I've sent a patch to the binutils maintainers and they've recently
applied it to the GNU assembler sources.
This fixes PR20152.
Differential Revision: http://reviews.llvm.org/D4395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212899 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the AsmParser to accept some logical+immediate
instructions and convert them as shown:
bic Rd, Rn, #imm -> and Rd, Rn, #~imm
bics Rd, Rn, #imm -> ands Rd, Rn, #~imm
orn Rd, Rn, #imm -> orr Rd, Rn, #~imm
eon Rd, Rn, #imm -> eor Rd, Rn, #~imm
Those instructions are an alternate syntax available to assembly coders,
and are needed in order to support code already compiling with some other
assemblers. For example, the bic construct is used by the linux kernel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212722 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212717 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't used for codegen since the original L*DB instructions
are suitable for fround.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212703 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This test ensures that we can correctly specify a full Windows path to the clang ASAN runtime libraries. This is in preparation to fix PR20246.
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4427
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212580 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow on to r212519 to improve the encapsulation and limit the scope of the enums.
Also merged two very similar parser functions, fixed a bug where ASE's
were not being reported, and marked CPR1's as being 128-bit when MSA is
enabled.
Differential Revision: http://reviews.llvm.org/D4384
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212522 91177308-0d34-0410-b5e6-96231b3b80d8
As destination k0 is allowed but not as predicate/writemask.
I also modified the test to allow checking of error messages by the assembler.
I applied a similar approach to the test ret.s in the same directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212504 91177308-0d34-0410-b5e6-96231b3b80d8
The linker relies on relocation type info (e.g. is it a branch?) to perform the
correct actions, so we should keep that even when we end up using a scattered
relocation for whatever reason.
rdar://problem/17553104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212333 91177308-0d34-0410-b5e6-96231b3b80d8
There were two issues here:
1. At the very least, scattered relocations cannot use the same code to
determine the corresponding symbol being referred to. For some reason we
pretend there is no symbol, even when one actually exists in the symtab, so to
match this behaviour getRelocationSymbol should simply return symbols_end for
scattered relocations.
2. Printing "-" when we can't get a symbol (including the scattered case, but
not exclusively), isn't that helpful. In both cases there *is* interesting
information in that field, so we should print it. As hex will do.
Small part of rdar://problem/17553104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212332 91177308-0d34-0410-b5e6-96231b3b80d8
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212330 91177308-0d34-0410-b5e6-96231b3b80d8
Silvermont can only decode one instruction per cycle if the instruction exceeds 8 bytes.
Also in Silvermont instructions with more than 3 prefixes will cause 3 cycle penalty.
Maximum nop length is limited to 7 bytes when used for padding on Silvermont.
For other x86 processors max nop length remains unchanged 15 bytes.
Differential Revision: http://reviews.llvm.org/D4374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212321 91177308-0d34-0410-b5e6-96231b3b80d8
This includes assembler and codegen support (see the new tests in
avx512-encodings.s and avx512-shuffle.ll).
<rdar://problem/17492620>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212221 91177308-0d34-0410-b5e6-96231b3b80d8
Based on the support for .req on ARM. The aarch64 variant has to keep track if
the alias register was a vector register (v0-31) or a general purpose or
VFP/Advanced SIMD ([bhsdq]0-31) register.
Patch by Janne Grunau!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212161 91177308-0d34-0410-b5e6-96231b3b80d8
For now I only updated the _alt variants. The main variants are used by
codegen and that will need a bit more work to trigger.
<rdar://problem/17492620>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212114 91177308-0d34-0410-b5e6-96231b3b80d8
This is a small targeted fix for pr20119. The code needs quiet a bit of
refactoring and I added some FIXMEs about it, but I want to get the testcase
passing first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212101 91177308-0d34-0410-b5e6-96231b3b80d8
COFF sections in MC were represented by a tuple of section-name and
COMDAT-name. This is not sufficient to represent a .text section
associated with another .text section; we need a way to distinguish
between the key section and the one marked associative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211913 91177308-0d34-0410-b5e6-96231b3b80d8
For now I used a separate template for these sub-vector/tuple broadcasts
rather than sharing the mem variants with avx512_int_broadcast_rm.
<rdar://problem/17402869>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211828 91177308-0d34-0410-b5e6-96231b3b80d8
Additional compliant GAS names for coprocessor register name
are enabled for all instruction with parameter MCK_CoprocReg:
LDC,LDC2,STC,STC2,CDP,CDP2,MCR,MCR2,MCRR,MCRR2,MRC,MRC2,MRRC,MRRC2
Patch by Andrey Kuharev.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211776 91177308-0d34-0410-b5e6-96231b3b80d8
The *_alt defs for vcmp are used by the InstParser (the asm string in the main
def is used by the InstPrinter) . The former was accepting vector registers
as destination rather than mask registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211750 91177308-0d34-0410-b5e6-96231b3b80d8
The test case in
"Fix PR20056: Implement pseudo LDR <reg>, =<literal/label> for AArch64" should
only work with Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211613 91177308-0d34-0410-b5e6-96231b3b80d8
"Fix PR20056: Implement pseudo LDR <reg>, =<literal/label> for AArch64"
Missed files are added in this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This instruction is re-encoded in MIPS32r6/MIPS64r6 without changing the
restrictions. We hadn't implemented it for earlier ISA's so it has been added to those too.
Differential Revision: http://reviews.llvm.org/D4265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211590 91177308-0d34-0410-b5e6-96231b3b80d8
V' bit in the P2 byte of the EVEX prefix provides the top bit of the NDD and
NDS register fields. This was simply not used in the decoder until now.
Fixes <rdar://problem/17402661>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211565 91177308-0d34-0410-b5e6-96231b3b80d8
to match llvm-size and other UNIX systems for their nm(1).
Tweak test cases that used llvm-nm with standard input to add a "-" to
indicate that and add a test case to check the default of a.out for llvm-nm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211529 91177308-0d34-0410-b5e6-96231b3b80d8
Strictly, it's unpredictable. But we don't quite model that yet and an error is
better than ignoring the issue. This one somehow got left out before though.
rdar://problem/15997748
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211490 91177308-0d34-0410-b5e6-96231b3b80d8
Correct the section flags for code built for Windows on ARM with
`-ffunction-sections`. Windows on ARM uses solely Thumb-2 instructions, and
indicates that the function is thumb by placing it in a text section that has
IMAGE_SCN_MEM_16BIT flag set.
When we encounter a .section directive, a new section is constructed. This may
be a text segment. In order to identify that we need the additional flag,
expose the target triple through the ObjectFileInfo as this information is lost
otherwise.
Since any modern ARM targeting environment on Windows would be Thumb-2 (Windows
ARM NT or Windows Embedded Compact), introducing a new flag to indicate the
section attribute seems to be a bit overkill. Simply depend on the target
triple. Since there is one location that this information is currently needed,
creating a target specific assembly parser and delegating the parsing of section
switches also feels a bit heavy handed. If it turns out that this information
ends up changing additional behaviour, then it may be worth considering that
alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211481 91177308-0d34-0410-b5e6-96231b3b80d8
User may initialize a var with non-zero value and specify .bss section.
E.g. : int a __attribute__((section(".bss"))) = 2;
This patch converts an assertion to error report for better user
experience.
Differential Revision: http://reviews.llvm.org/D4199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211455 91177308-0d34-0410-b5e6-96231b3b80d8
for assembly files we can't depend on the offset within the section
after a string since it could be different between producers etc.
Relax these tests accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211308 91177308-0d34-0410-b5e6-96231b3b80d8
Use the MCStreamer base implementations for file ID tracking instead of
overriding them as no-ops.
Avoids assertions when streaming Dwarf debug info, and fixes ASM parsing of loc
and file directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211282 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, llvm always emits a DWARF CIE with a version of 1, even when emitting
DWARF 3 or 4, which both support CIE version 3. This patch makes it emit the
newer CIE version when we are emitting DWARF 3 or 4. This will not reduce
compatibility, as we already emit other DWARF3/4 features, and is worth doing as
the DWARF3 spec removed some ambiguities in the interpretation of call frame
information.
It also fixes a minor bug where the "return address" field of the CIE was
encoded as a ULEB128, which is only valid when the CIE version is 3. There are
no test changes for this, because (as far as I can tell) none of the platforms
that we test have a return address register with a DWARF register number >127.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211272 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Some small modifications to the original patch: we now error if
it's not possible to expand an instruction (mips-expansions-bad.s has some
examples). Added some comments to the expansions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211271 91177308-0d34-0410-b5e6-96231b3b80d8
We would get confused by '@' characters in symbol names, we would
mistake the text following them for the variant kind.
When an identifier a string, the variant kind will never show up inside
of it. Instead, check to see if there is a variant following the
string.
This fixes PR19965.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211249 91177308-0d34-0410-b5e6-96231b3b80d8
Note that I followed the AVX2 convention here and didn't add LLVM intrinsics
for stores. These can be generated with the nontemporal hint on LLVM IR
stores (see new test). The GCC builtins are lowered directly into nontemporal
stores.
<rdar://problem/17082571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211176 91177308-0d34-0410-b5e6-96231b3b80d8
Use the max 64-bit element size with EVEX_CD8. This should work since element
size is ignored for a full-vector access (FVM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211175 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211169 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch doesn't really change the logic behind expandMemInst but it allows
us to assemble .S files that use .set noat with some macros. For example:
.set noat
lw $k0, offset($k1)
Can expand to:
lui $k0, %hi(offset)
addu $k0, $k0, $k1
lw $k0, %lo(offset)($k0)
with no need to access $at.
Reviewers: dsanders, vmedic
Reviewed By: dsanders, vmedic
Differential Revision: http://reviews.llvm.org/D4159
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added negative test case so that we can be sure we handle erroneous situations
while parsing the .cpsetup directive.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211160 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211019 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211018 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The error message for the invalid.s cases isn't very helpful. It happens because
there is an instruction with a wider immediate that would have matched if the
NotMips32r6 predicate were true. I have some WIP to improve the message but it
affects most error messages for removed/re-encoded instructions on
MIPS32r6/MIPS64r6 and should therefore be a separate commit.
Depens on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211012 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in
MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset
available to earlier cores.
Resolved the decoding conflict between pref and lwc3.
Depends on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4116
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210900 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias
for 'bgezal $zero, $offset') still remains with the same encoding it had
prior to MIPS32r6/MIPS64r6.
Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the
MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo.
No changes were required to the CodeGen test that looks for BAL
(test/CodeGen/Mips/longbranch.ll) since the new instruction has the same
syntax.
Depends on D4113
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210898 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It's not emitted by the code generator so we only need assembler tests.
Also added missing daddi aliases from dsub mnemonics, and removed a couple
duplicate dsub tests.
Depends on D4112
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210897 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also tightened up the acceptable condition operand for these instructions
on MIPS-I to MIPS-III. Support for $fcc[1-7] was added in MIPS-IV. Prior
to that only $fcc0 is acceptable.
We currently don't optimize (BEQZ (NOT $a), $target) and similar. It's
probably best to do this in InstCombine.
Depends on D4111
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4112
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These instructions are not implemented for any MIPS ISA so we only need
testcases.
Depends on D4110
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4111
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210786 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Folded mips64-fp-indexed-ls.ll into fp-indexed-ls.ll. To do so, the zext's in
mips64-fp-indexed-ls.ll were changed to implicit sign extensions (performed
by getelementptr). This does not affect the purpose of the test.
Depends on D4004
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4110
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210784 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
c.cond.fmt has been replaced by cmp.cond.fmt. Where c.cond.fmt wrote to
dedicated condition registers, cmp.cond.fmt writes 1 or 0 to normal FGR's
(like the GPR comparisons).
mov[fntz] have been replaced by seleqz and selnez. These instructions
conditionally zero a register based on a bool in a GPR. The results can
then be or'd together to act as a select without, for example, requiring a third
register read port.
mov[fntz].[ds] have been replaced with sel.[ds]
MIPS64r6 currently generates unnecessary sign-extensions for most selects.
This is because the result of a SETCC is currently an i32. Bits 32-63 are
undefined in i32 and the behaviour of seleqz/selnez would otherwise depend
on undefined bits. Later, we will fix this by making the result of SETCC an
i64 on MIPS64 targets.
Depends on D3958
Reviewers: jkolek, vmedic, zoran.jovanovic
Reviewed By: vmedic, zoran.jovanovic
Differential Revision: http://reviews.llvm.org/D4003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210777 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch updates both the assembler and the code generator.
MIPS32r6/MIPS64r6 replaces them with maddf.[ds] and msubf.[ds] which are fused
multiply-add/sub operations. We don't emit these yet, this patch only prevents the removed instructions from being emitted.
Depends on D3955
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210763 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch disables madd/maddu/msub/msubu in both the assembler and code
generator.
Depends on D3896
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3955
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210762 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The accumulator-based (HI/LO) multiplies and divides from earlier ISA's have
been removed and replaced with GPR-based equivalents. For example:
div $1, $2
mflo $3
is now:
div $3, $1, $2
This patch disables the accumulator-based multiplies and divides for
MIPS32r6/MIPS64r6 and uses the GPR-based equivalents instead.
Renamed expandPseudoDiv to insertDivByZeroTrap to better describe the
behaviour of the function.
MipsDelaySlotFiller now invalidates the liveness information when moving
instructions to the delay slot. Without this, divrem.ll will abort since
%GP ends up used before it is defined.
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D3896
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210760 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would always print the offset as decimal, regardless of
the formatting requested. Now we use the formatImm() helper so the value
is printed as the client (LLDB in the motivating example) requested.
Before:
ldr.w r8, [sp, #180] @ always
After:
ldr.w r8, [sp, #0xb4] @ when printing hex immediates
ldr.w r8, [sp, #0180] @ when printing decimal immediates
rdar://17237103
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210701 91177308-0d34-0410-b5e6-96231b3b80d8
Previously there was a separate mode entirely (--hdis vs.
--disassemble). It makes a bit more sense for the immediate printing
style to be a flag for --disassmeble rather than an entirely different
thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210700 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206683.
The code was confusing SEH register numbers with DWARF register numbers.
The test case it was committed with was obviously incorrect. The
disassembler was roundtripping '.seh_pushreg %rsi' as '.seh_pushreg
%rbp', and other exciting things.
Noticed by Vadim Chugunov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210574 91177308-0d34-0410-b5e6-96231b3b80d8
inverted condition codes (CINC, CINV, CNEG, CSET, and CSETM).
Matching aliases based on "immediate classes", when disassembling,
wasn't previously supported, hence adding MCOperandPredicate
into class Operand, and implementing the support for it
in AsmWriterEmitter.
The parsing for those aliases was already custom, so just adding
the missing condition into AArch64AsmParser::parseCondCode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210528 91177308-0d34-0410-b5e6-96231b3b80d8
link.exe requires that the text section has the IMAGE_SCN_MEM_16BIT flag set.
Otherwise, it will treat the function as ARM. If this occurs, then jumps to the
function will fail, switching from thumb to ARM mode execution.
With this change, it is possible to link using the MSVC linker as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210415 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than requiring ARM support for the ELF tests (which is odd), move the
tests that require ARM into a subdirectory to use lit to disable them if the
support is not present. Play this game to prevent disabling the ELF tests on
the Windows build bots as they have caught issues in the past with interactions
between various platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210408 91177308-0d34-0410-b5e6-96231b3b80d8
GAS documents the .type directive as having an optional comma following the key
symbol name when using the STT_<TYPE_IN_UPPER_CASE> form. However, it treats
the comma as optional in all cases. This makes the IAS support both forms of
inputs. Furthermore, the prefixed forms take either the upper case name or the
lower case alias.
The tests are split into two separate sets as the hash character serves as a
comment character on x86, which is tested in the second set by using arm-elf
which uses the at symbol as a comment character.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210407 91177308-0d34-0410-b5e6-96231b3b80d8
Prevent the early elimination of sections in the object writer. There may be
references to the section itself by other symbols, which may potentially not be
possible to resolve. ML (Visual Studio's Macro Assembler) also seems to retain
empty sections.
The elimination of symbols and sections which are unused should really occur at
the link phase. This will not cause any change in the resulting binary, simply
in the generated object files.
The adjustments to the other unit tests account for the fluctuating section
index caused by the appearance of sections which were previously discarded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210373 91177308-0d34-0410-b5e6-96231b3b80d8
* Section association cannot use just the section name as many
sections can have the same name. With this patch, the comdat symbol in
an assoc section is interpreted to mean a symbol in the associated
section and the mapping is discovered from it.
* Comdat symbols were not being set correctly. Instead we were getting
whatever was output first for that section.
A consequence is that associative sections now must use .section to
set the association. Using .linkonce would not work since it is not
possible to change a sections comdat symbol (it is used to decide if
we should create a new section or reuse an existing one).
This includes r210298, which was reverted because it was asserting
on an associated section having the same comdat as the associated
section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210367 91177308-0d34-0410-b5e6-96231b3b80d8
