..
2002-12-23-LocalRAProblem.ll
2002-12-23-SubProblem.ll
2003-08-03-CallArgLiveRanges.ll
2003-08-23-DeadBlockTest.ll
2003-11-03-GlobalBool.ll
2004-02-12-Memcpy.ll
2004-02-13-FrameReturnAddress.ll
Targets sometimes assign fixed stack object to spill certain callee-saved
2009-07-09 06:53:48 +00:00
2004-02-14-InefficientStackPointer.ll
2004-02-22-Casts.ll
2004-03-30-Select-Max.ll
2004-04-09-SameValueCoalescing.ll
2004-04-13-FPCMOV-Crash.ll
2004-06-10-StackifierCrash.ll
2004-10-08-SelectSetCCFold.ll
2005-01-17-CycleInDAG.ll
2005-02-14-IllegalAssembler.ll
2005-05-08-FPStackifierPHI.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2006-01-19-ISelFoldingBug.ll
2006-03-01-InstrSchedBug.ll
2006-03-02-InstrSchedBug.ll
2006-04-04-CrossBlockCrash.ll
2006-04-27-ISelFoldingBug.ll
2006-05-01-SchedCausingSpills.ll
2006-05-02-InstrSched1.ll
2006-05-02-InstrSched2.ll
2006-05-08-CoalesceSubRegClass.ll
2006-05-08-InstrSched.ll
2006-05-11-InstrSched.ll
Change these tests to use regular loads instead of llvm.x86.sse2.loadu.dq.
2009-02-16 00:44:23 +00:00
2006-05-17-VectorArg.ll
2006-05-22-FPSetEQ.ll
2006-05-25-CycleInDAG.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2006-07-10-InlineAsmAConstraint.ll
2006-07-12-InlineAsmQConstraint.ll
2006-07-19-ATTAsm.ll
Do not use buggy llvm-gcc to generate testcases.
2009-01-22 18:28:11 +00:00
2006-07-20-InlineAsm.ll
2006-07-28-AsmPrint-Long-As-Pointer.ll
2006-07-31-SingleRegClass.ll
2006-08-07-CycleInDAG.ll
2006-08-16-CycleInDAG.ll
2006-08-21-ExtraMovInst.ll
2006-09-01-CycleInDAG.ll
2006-10-02-BoolRetCrash.ll
2006-10-07-ScalarSSEMiscompile.ll
2006-10-09-CycleInDAG.ll
2006-10-10-FindModifiedNodeSlotBug.ll
2006-10-12-CycleInDAG.ll
2006-10-13-CycleInDAG.ll
2006-10-19-SwitchUnnecessaryBranching.ll
Add an explicit -asm-verbose to these tests, to make it
2009-03-31 18:20:47 +00:00
2006-11-12-CSRetCC.ll
2006-11-17-IllegalMove.ll
add nounwind
2009-07-12 00:46:16 +00:00
2006-11-27-SelectLegalize.ll
2006-11-28-Memcpy.ll
2006-12-19-IntelSyntax.ll
2007-01-08-InstrSched.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-01-13-StackPtrIndex.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-01-29-InlineAsm-ir.ll
2007-02-04-OrAddrMode.ll
2007-02-19-LiveIntervalAssert.ll
2007-02-25-FastCCStack.ll
2007-03-01-SpillerCrash.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-03-15-GEP-Idx-Sink.ll
2007-03-16-InlineAsm.ll
2007-03-18-LiveIntervalAssert.ll
2007-03-24-InlineAsmMultiRegConstraint.ll
2007-03-24-InlineAsmPModifier.ll
2007-03-24-InlineAsmVectorOp.ll
2007-03-24-InlineAsmXConstraint.ll
2007-03-26-CoalescerBug.ll
2007-04-08-InlineAsmCrash.ll
2007-04-11-InlineAsmVectorResult.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-04-17-LiveIntervalAssert.ll
2007-04-24-Huge-Stack.ll
2007-04-24-VectorCrash.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-04-25-MMX-PADDQ.ll
2007-04-27-InlineAsm-IntMemInput.ll
2007-05-05-VecCastExpand.ll
2007-05-07-InvokeSRet.ll
2007-05-14-LiveIntervalAssert.ll
2007-05-15-maskmovq.ll
2007-05-17-ShuffleISelBug.ll
2007-06-04-tailmerge4.ll
Add an explicit -asm-verbose to these tests, to make it
2009-03-31 18:20:47 +00:00
2007-06-04-X86-64-CtorAsmBugs.ll
2007-06-05-LSR-Dominator.ll
2007-06-14-branchfold.ll
2007-06-15-IntToMMX.ll
2007-06-28-X86-64-isel.ll
2007-06-29-DAGCombinerBug.ll
2007-06-29-VecFPConstantCSEBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-07-03-GR64ToVR64.ll
2007-07-10-StackerAssert.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-07-18-Vector-Extract.ll
2007-08-01-LiveVariablesBug.ll
2007-08-09-IllegalX86-64Asm.ll
2007-08-10-SignExtSubreg.ll
Revert 67132. This is breaking some objective-c apps.
2009-03-25 20:20:11 +00:00
2007-08-13-AppendingLinkage.ll
2007-08-13-SpillerReuse.ll
2007-09-03-X86-64-EhSelector.ll
2007-09-05-InvalidAsm.ll
2007-09-06-ExtWeakAliasee.ll
2007-09-17-ObjcFrameEH.ll
2007-09-18-ShuffleXformBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-09-27-LDIntrinsics.ll
2007-10-04-AvoidEFLAGSCopy.ll
2007-10-05-3AddrConvert.ll
Teach LSR sink to sink the immediate portion of the common expression back into uses if they fit in address modes of all the uses.
2009-02-21 02:06:47 +00:00
2007-10-12-CoalesceExtSubReg.ll
2007-10-12-SpillerUnfold1.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-10-12-SpillerUnfold2.ll
2007-10-14-CoalescerCrash.ll
2007-10-15-CoalescerCrash.ll
2007-10-16-CoalescerCrash.ll
2007-10-16-fp80_select.ll
2007-10-16-IllegalAsm.ll
2007-10-17-IllegalAsm.ll
2007-10-19-SpillerUnfold.ll
2007-10-28-inlineasm-q-modifier.ll
2007-10-29-ExtendSetCC.ll
2007-10-30-LSRCrash.ll
2007-10-31-extractelement-i64.ll
2007-11-01-ISelCrash.ll
2007-11-02-BadAsm.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-11-03-x86-64-q-constraint.ll
2007-11-04-LiveIntervalCrash.ll
2007-11-04-LiveVariablesBug.ll
2007-11-04-rip-immediate-constant.ll
2007-11-06-InstrSched.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-11-07-MulBy4.ll
2007-11-14-Coalescer-Bug.ll
Enable cross register class coalescing.
2009-07-18 02:10:10 +00:00
2007-11-30-LoadFolding-Bug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-11-30-TestLoadFolding.ll
2007-12-11-FoldImpDefSpill.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2007-12-16-BURRSchedCrash.ll
2007-12-18-LoadCSEBug.ll
2008-01-08-IllegalCMP.ll
2008-01-08-SchedulerCrash.ll
2008-01-09-LongDoubleSin.ll
2008-01-16-FPStackifierAssert.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-01-16-InvalidDAGCombineXform.ll
2008-01-16-Trampoline.ll
2008-01-25-EmptyFunction.ll
2008-02-05-ISelCrash.ll
2008-02-06-LoadFoldingBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-02-08-LoadFoldingBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-02-14-BitMiscompile.ll
2008-02-18-TailMergingBug.ll
2008-02-20-InlineAsmClobber.ll
Model inline asm constraint which ties an input to an output register as machine operand TIED_TO constraint. This eliminated the need to pre-allocate registers for these. This also allows register allocator can eliminate the unneeded copies.
2009-03-23 08:01:15 +00:00
2008-02-22-LocalRegAllocBug.ll
2008-02-22-ReMatBug.ll
Don't use special heuristics for nodes with no data predecessors
2009-02-11 21:29:39 +00:00
2008-02-25-InlineAsmBug.ll
2008-02-25-X86-64-CoalescerBug.ll
2008-02-26-AsmDirectMemOp.ll
2008-02-27-DeadSlotElimBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-02-27-PEICrash.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-03-06-frem-fpstack.ll
2008-03-07-APIntBug.ll
2008-03-10-RegAllocInfLoop.ll
2008-03-12-ThreadLocalAlias.ll
2008-03-13-TwoAddrPassCrash.ll
2008-03-14-SpillerCrash.ll
2008-03-18-CoalescerBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-03-19-DAGCombinerBug.ll
2008-03-23-DarwinAsmComments.ll
Add an explicit -asm-verbose to these tests, to make it
2009-03-31 18:20:47 +00:00
2008-03-25-TwoAddrPassBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-03-31-SpillerFoldingBug.ll
2008-04-02-unnamedEH.ll
Check for the correct unnamed name.
2009-07-14 00:53:58 +00:00
2008-04-08-CoalescerCrash.ll
2008-04-09-BranchFolding.ll
2008-04-15-LiveVariableBug.ll
Second attempt:
2009-04-29 00:15:41 +00:00
2008-04-16-CoalescerBug.ll
2008-04-16-ReMatBug.ll
2008-04-17-CoalescerBug.ll
2008-04-24-MemCpyBug.ll
2008-04-24-pblendw-fold-crash.ll
2008-04-26-Asm-Optimize-Imm.ll
2008-04-28-CoalescerBug.ll
2008-04-28-CyclicSchedUnit.ll
2008-05-01-InvalidOrdCompare.ll
2008-05-09-PHIElimBug.ll
2008-05-09-ShuffleLoweringBug.ll
2008-05-12-tailmerge-5.ll
2008-05-21-CoalescerBug.ll
Second attempt:
2009-04-29 00:15:41 +00:00
2008-05-22-FoldUnalignedLoad.ll
2008-05-28-CoalescerBug.ll
2008-05-28-LocalRegAllocBug.ll
2008-06-04-MemCpyLoweringBug.ll
2008-06-13-NotVolatileLoadStore.ll
2008-06-13-VolatileLoadStore.ll
2008-06-16-SubregsBug.ll
2008-06-18-BadShuffle.ll
2008-06-25-VecISelBug.ll
2008-07-07-DanglingDeadInsts.ll
2008-07-09-ELFSectionAttributes.ll
2008-07-11-SHLBy1.ll
2008-07-11-SpillerBug.ll
Fix test after Chris' select changes.
2009-03-12 16:10:08 +00:00
2008-07-16-CoalescerCrash.ll
2008-07-19-movups-spills.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-07-22-CombinerCrash.ll
2008-07-23-VSetCC.ll
eliminate the v[if]cmp versions of these tests, now that [if]cmp+sext works.
2009-07-08 00:49:35 +00:00
2008-08-05-SpillerBug.ll
Added a linearscan register allocation optimization. When the register allocator spill an interval with multiple uses in the same basic block, it creates a different virtual register for each of the reloads. e.g.
2009-04-20 08:01:12 +00:00
2008-08-06-RewriterBug.ll
2008-08-17-UComiCodeGenBug.ll
2008-08-19-SubAndFetch.ll
Optimize some common usage patterns of atomic built-ins __sync_add_and_fetch() and __sync_sub_and_fetch.
2009-07-30 08:33:02 +00:00
2008-08-23-64Bit-maskmovq.ll
2008-08-23-X86-64AsmBug.ll
Changed my mind. We now allow remat of instructions whose defs have subreg indices.
2009-07-16 20:15:00 +00:00
2008-08-25-AsmRegTypeMismatch.ll
Fix another test to not use -mcpu=yonah with 64-bit code.
2009-02-02 23:43:59 +00:00
2008-08-31-EH_RETURN32.ll
Targets sometimes assign fixed stack object to spill certain callee-saved
2009-07-09 06:53:48 +00:00
2008-08-31-EH_RETURN64.ll
Targets sometimes assign fixed stack object to spill certain callee-saved
2009-07-09 06:53:48 +00:00
2008-09-05-sinttofp-2xi32.ll
2008-09-09-LinearScanBug.ll
2008-09-11-CoalescerBug2.ll
2008-09-11-CoalescerBug.ll
2008-09-17-inline-asm-1.ll
2008-09-18-inline-asm-2.ll
Model inline asm constraint which ties an input to an output register as machine operand TIED_TO constraint. This eliminated the need to pre-allocate registers for these. This also allows register allocator can eliminate the unneeded copies.
2009-03-23 08:01:15 +00:00
2008-09-19-RegAllocBug.ll
2008-09-25-sseregparm-1.ll
2008-09-26-FrameAddrBug.ll
2008-09-29-ReMatBug.ll
2008-09-29-VolatileBug.ll
2008-10-02-Atomics32-2.ll
Help DejaGnu avoid pipe-jam by producing less output from certain test cases.
2009-05-16 00:34:42 +00:00
2008-10-06-MMXISelBug.ll
2008-10-06-x87ld-nan-1.ll
2008-10-06-x87ld-nan-2.ll
2008-10-07-SSEISelBug.ll
2008-10-11-CallCrash.ll
2008-10-13-CoalescerBug.ll
2008-10-16-SpillerBug.ll
Added a linearscan register allocation optimization. When the register allocator spill an interval with multiple uses in the same basic block, it creates a different virtual register for each of the reloads. e.g.
2009-04-20 08:01:12 +00:00
2008-10-16-VecUnaryOp.ll
2008-10-17-Asm64bitRConstraint.ll
2008-10-20-AsmDoubleInI32.ll
2008-10-24-FlippedCompare.ll
2008-10-27-CoalescerBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-10-27-StackRealignment.ll
2008-10-29-ExpandVAARG.ll
2008-11-03-F80VAARG.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-11-06-testb.ll
Fix the testb optimization so x86 also bootstraps.
2008-11-12 02:00:35 +00:00
2008-11-13-inlineasm-3.ll
testcase for PR 1779.
2008-11-13 22:17:10 +00:00
2008-11-29-DivideConstant16bit.ll
Fix for PR2164: allow transforming arbitrary-width unsigned divides into
2008-11-30 06:02:26 +00:00
2008-11-29-DivideConstant16bitSigned.ll
Followup to r60283: optimize arbitrary width signed divisions as well
2008-11-30 06:35:39 +00:00
2008-11-29-ULT-Sign.ll
APIntify a test which is potentially unsafe otherwise, and fix the
2008-11-30 04:59:26 +00:00
2008-12-01-loop-iv-used-outside-loop.ll
Add rdar reference, make this actually fail when the patch isn't applied.
2008-12-01 22:35:31 +00:00
2008-12-01-SpillerAssert.ll
Fix PR3124: overly strict assert.
2008-12-02 02:15:36 +00:00
2008-12-02-dagcombine-1.ll
testcases for recent dag combiner changes
2008-12-03 00:52:41 +00:00
2008-12-02-dagcombine-2.ll
testcases for recent dag combiner changes
2008-12-03 00:52:41 +00:00
2008-12-02-dagcombine-3.ll
testcases for recent dag combiner changes
2008-12-03 00:52:41 +00:00
2008-12-02-IllegalResultType.ll
Fix PR3117: not all nodes being legalized. The
2008-12-09 21:33:20 +00:00
2008-12-05-SpillerCrash.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2008-12-12-PrivateEHSymbol.ll
rename test.
2009-07-17 18:05:55 +00:00
2008-12-16-BadShift.ll
Fix for PR3225: disable a broken optimization in
2008-12-17 03:35:17 +00:00
2008-12-16-dagcombine-4.ll
A new dag combine; several permutations of this
2008-12-16 22:13:49 +00:00
2008-12-19-EarlyClobberBug.ll
Model inline asm constraint which ties an input to an output register as machine operand TIED_TO constraint. This eliminated the need to pre-allocate registers for these. This also allows register allocator can eliminate the unneeded copies.
2009-03-23 08:01:15 +00:00
2008-12-22-dagcombine-5.ll
One more permutation of subtracting off a base value.
2008-12-23 01:59:54 +00:00
2008-12-23-crazy-address.ll
Fix a compiler-abort on a testcase where the stack-pointer is added to
2008-12-24 00:27:51 +00:00
2008-12-23-dagcombine-6.ll
Add another permutation where we should get rid of a-a.
2008-12-23 23:01:27 +00:00
2009-01-12-CoalescerBug.ll
FIX llvm-gcc bootstrap on x86_64 linux. If a virtual register is copied to a physical register, it's not necessarily defined by a copy. We have to watch out it doesn't clobber any sub-register that might be live during its live interval. If the live interval crosses a basic block, then it's not safe to check with the less conservative check (by scanning uses and defs) because it's possible a sub-register might be live out of the block.
2009-01-13 03:57:45 +00:00
2009-01-13-DoubleUpdate.ll
When replacing uses and the same node is reached
2009-01-13 15:17:14 +00:00
2009-01-16-SchedulerBug.ll
CreateVirtualRegisters does trivial copy coalescing. If a node def is used by a single CopyToReg, it reuses the virtual register assigned to the CopyToReg. This won't work for SDNode that is a clone or is itself cloned. Disable this optimization for those nodes or it can end up with non-SSA machine instructions.
2009-01-16 20:57:18 +00:00
2009-01-16-UIntToFP.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2009-01-18-ConstantExprCrash.ll
Fix rdar://6505632, an llc crash on 483.xalancbmk
2009-01-18 20:35:00 +00:00
2009-01-25-NoSSE.ll
Implement -mno-sse: if SSE is disabled on x86-64, don't store XMM on stack for
2009-02-01 18:15:56 +00:00
2009-01-26-WrongCheck.ll
Fix PR3393, which amounts to a bug in the expensive
2009-01-26 21:54:18 +00:00
2009-01-27-NullStrings.ll
Make the big switch: Change MCSectionMachO to represent a section *semantically*
2009-08-10 01:39:42 +00:00
2009-01-29-LocalRegAllocBug.ll
Local register allocator shouldn't assume only the entry and landing pad basic blocks have live-ins.
2009-01-29 18:37:30 +00:00
2009-01-31-BigShift2.ll
Fix PR3401: when using large integers, the type
2009-01-31 15:50:11 +00:00
2009-01-31-BigShift3.ll
Fix PR3401: when using large integers, the type
2009-01-31 15:50:11 +00:00
2009-01-31-BigShift.ll
Fix PR3401: when using large integers, the type
2009-01-31 15:50:11 +00:00
2009-02-01-LargeMask.ll
Fix PR3453 and probably a bunch of other potential
2009-02-01 18:06:53 +00:00
2009-02-03-AnalyzedTwice.ll
Fix PR3411. When replacing values, nodes are analyzed
2009-02-03 10:23:33 +00:00
2009-02-04-sext-i64-gep.ll
if we have a large GEP offset on a 32-bit or other target, make
2009-02-05 06:55:21 +00:00
2009-02-05-CoalescerBug.ll
Fix test. It produces unexpected code if sse4.1 is on.
2009-02-06 01:49:19 +00:00
2009-02-07-CoalescerBug.ll
Re-enable machine sinking pass now that the coalescer bugs and the AnalyzeBrnach bug are fixed.
2009-02-09 08:45:39 +00:00
2009-02-08-CoalescerBug.ll
Fix PR3486. Fix a bug in code that manually patch physical register live interval after its sub-register is coalesced with a virtual register.
2009-02-08 11:04:35 +00:00
2009-02-11-codegenprepare-reuse.ll
fix PR3537: if resetting bbi back to the start of a block, we need to
2009-02-12 06:56:08 +00:00
2009-02-12-DebugInfoVLA.ll
fix the X86 backend to just drop llvm.declare nodes for VLAs instead of
2009-02-12 17:33:11 +00:00
2009-02-12-InlineAsm-nieZ-constraints.ll
Arrange to print constants that match "n" and "i" constraints
2009-02-12 20:58:09 +00:00
2009-02-12-SpillerBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2009-02-20-PreAllocSplit-Crash.ll
Fix a crash in the pre-alloc splitter exposed by recent codegen changes.
2009-02-20 10:02:23 +00:00
2009-02-21-ExtWeakInitializer.ll
Drop bunch of half-working stuff in the ext_weak linkage support.
2009-02-21 11:53:32 +00:00
2009-02-25-CommuteBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2009-02-26-MachineLICMBug.ll
MachineLICM CSE should match destination register classes; avoid hoisting implicit_def's.
2009-02-27 00:02:22 +00:00
2009-03-03-BitcastLongDouble.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2009-03-03-BTHang.ll
The DAG combiner was performing a BT combine. The BT combine had a value of -1,
2009-03-04 00:18:06 +00:00
2009-03-05-burr-list-crash.ll
Fix ScheduleDAGRRList::CopyAndMoveSuccessors' handling of nodes
2009-03-06 02:23:01 +00:00
2009-03-07-FPConstSelect.ll
reapply my previous patch (r66358) with a tweak to set the
2009-03-11 05:08:08 +00:00
2009-03-09-APIntCrash.ll
Fix PR3763 by using proper APInt methods instead of uint64_t's.
2009-03-09 20:22:18 +00:00
2009-03-09-SpillerBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2009-03-10-CoalescerBug.ll
Two coalescer fixes in one.
2009-03-11 00:03:21 +00:00
2009-03-11-CoalescerBug.ll
My last coalescer fix introduced a subtler one. It's aborting a commuting optimization too late and left the live intervals to be out of sync with instructions. This fixes 8b10b.
2009-03-11 22:18:44 +00:00
2009-03-12-CPAlignBug.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
2009-03-13-PHIElimBug.ll
Reapply r67049, with the test adjusted for darwin
2009-03-17 09:46:22 +00:00
2009-03-16-PHIElimInLPad.ll
Add an explicit -asm-verbose to these tests, to make it
2009-03-31 18:20:47 +00:00
2009-03-16-SpillerBug.ll
THis doesn't fail.
2009-05-07 01:41:42 +00:00
2009-03-23-i80-fp80.ll
Fix internal representation of fp80 to be the
2009-03-23 21:16:53 +00:00
2009-03-23-LinearScanBug.ll
Second attempt:
2009-04-29 00:15:41 +00:00
2009-03-23-MultiUseSched.ll
For Darwin / x86_64, override -relocation-model=static to pic if the output is assembly since Darwin assembler does not really support -static codeine.
2009-06-03 21:13:54 +00:00
2009-03-25-TestBug.ll
Add -march=x86.
2009-03-26 23:03:32 +00:00
2009-03-26-NoImplicitFPBug.ll
Change these tests to use function attributes rather than special llc
2009-08-05 16:37:27 +00:00
2009-04-09-InlineAsmCrash.ll
reg0 references are not real registers. This fixes a crash on the
2009-04-09 16:50:43 +00:00
2009-04-12-FastIselOverflowCrash.ll
fix a cross-block fastisel crash handling overflow intrinsics.
2009-04-12 07:51:14 +00:00
2009-04-12-picrel.ll
In X86DAGToDAGISel::MatchWrapper, if base or index are set, avoid matching
2009-04-12 23:00:38 +00:00
2009-04-13-2AddrAssert-2.ll
Fix PR3934 part 2. findOnlyInterestingUse() was not setting IsCopy and IsDstPhys which are returned by value and used by callee. This happened to work on the earlier test cases because of a logic error in the caller side.
2009-04-14 00:32:25 +00:00
2009-04-13-2AddrAssert.ll
PR3934: Fix a bogus two-address pass assertion.
2009-04-13 20:04:24 +00:00
2009-04-14-IllegalRegs.ll
Second attempt:
2009-04-29 00:15:41 +00:00
2009-04-16-SpillerUnfold.ll
Adjust XFAIL syntax, maybe that will help. The other
2009-04-18 02:01:23 +00:00
2009-04-20-LinearScanOpt.ll
Added a linearscan register allocation optimization. When the register allocator spill an interval with multiple uses in the same basic block, it creates a different virtual register for each of the reloads. e.g.
2009-04-20 08:01:12 +00:00
2009-04-21-NoReloadImpDef.ll
It has finally happened. Spiller is now using live interval info.
2009-04-21 22:46:52 +00:00
2009-04-24.ll
Fix the syntax for a PR number in a test.
2009-04-27 15:08:34 +00:00
2009-04-25-CoalescerBug.ll
Do not share a single unknown val# for all the live ranges merged into a physical sub-register live interval. When coalescer is merging in clobbered virtaul register live interval into a physical register live interval, give each virtual register val# a separate val# in the physical register live interval. Otherwise, the coalescer would have lost track of the definitions information it needs to make correct coalescing decisions.
2009-04-25 09:25:19 +00:00
2009-04-27-CoalescerAssert.ll
Fix PR4034. Bug in LiveInterval::join when it's compacting new valno's.
2009-04-28 06:24:09 +00:00
2009-04-27-LiveIntervalsAssert2.ll
Fix for PR4051. When 2address pass delete an instruction, update kill info when necessary.
2009-04-28 02:12:36 +00:00
2009-04-27-LiveIntervalsAssert.ll
Fix PR4056. It's possible a physical register def is dead if its implicit use is deleted by two-address pass.
2009-04-27 17:36:47 +00:00
2009-04-27-LiveIntervalsBug.ll
Fix PR4076. Correctly create live interval of physical register with two-address update.
2009-04-27 20:42:46 +00:00
2009-04-29-IndirectDestOperands.ll
fix a regression handling indirect results: these need to be considered
2009-04-30 00:48:50 +00:00
2009-04-29-LinearScanBug.ll
spillPhysRegAroundRegDefsUses() may have invalidated iterators stored in fixed_ IntervalPtrs. Reset them.
2009-04-29 07:16:34 +00:00
2009-04-29-RegAllocAssert.ll
Mark MOV8mr_NOREX and MOV8rm_NOREX as mayStore / mayLoad respectively.
2009-04-30 00:58:57 +00:00
2009-04-scale.ll
fix PR3995. A scale must be 1, 2, 4 or 8.
2009-04-16 12:34:53 +00:00
2009-05-08-InlineAsmIOffset.ll
Fix PR4152: asm constraint validation happens before dag combine, so we
2009-05-08 18:23:14 +00:00
2009-05-11-tailmerge-crash.ll
Fix PR4188. TailMerging can't tolerate inexact
2009-05-11 21:54:13 +00:00
2009-05-19-SingleElementExtractElement.ll
Add a testcase which got fixed by recent legalization work.
2009-05-28 05:10:20 +00:00
2009-05-23-available_externally.ll
available_externall linkage is not local, this was confusing the codegenerator,
2009-05-23 14:06:57 +00:00
2009-05-23-dagcombine-shifts.ll
Fix PR4254.
2009-05-23 17:29:48 +00:00
2009-05-28-DAGCombineCrash.ll
Do not try to create a MVT type of width 0.
2009-05-28 23:52:18 +00:00
2009-05-30-ISelBug.ll
(i64 (zext (srl GR32 8))) -> movzbl AH is not safe since srl 8 only clear the top 8 bits.
2009-05-30 08:43:27 +00:00
2009-06-02-RewriterBug.ll
Fix for PR4225: When rewriter reuse a value in a physical register , it clear the register kill operand marker and its kill ops information. However, the cleared operand may be a def of a super-register. Clear the kill ops info for the super-register's sub-registers as well.
2009-06-03 09:00:27 +00:00
2009-06-03-Win64DisableRedZone.ll
Unbreak Win64 CC. Step one: honour register save area, fix some alignment and provide a different set of call-clobberred registers.
2009-08-03 08:12:53 +00:00
2009-06-03-Win64SpillXMM.ll
Unbreak Win64 CC. Step one: honour register save area, fix some alignment and provide a different set of call-clobberred registers.
2009-08-03 08:12:53 +00:00
2009-06-04-VirtualLiveIn.ll
RALinScan::attemptTrivialCoalescing() was returning a virtual register instead of the physical register it is allocated to. This resulted in virtual register(s) being added the live-in sets.
2009-06-04 20:53:36 +00:00
2009-06-05-ScalarToVectorByteMMX.ll
Get rid of a bogus pattern that interferes with optimization.
2009-06-06 04:17:04 +00:00
2009-06-05-sitofpCrash.ll
PR2598: make sure to expand illegal forms of integer/floating-point
2009-06-06 03:57:58 +00:00
2009-06-05-VariableIndexInsert.ll
Avoid crashing on a variable-index insertelement with element type i16.
2009-06-06 06:32:50 +00:00
2009-06-05-VZextByteShort.ll
Get rid of some bogus patterns for X86vzmovl. Don't create VZEXT_MOVL
2009-06-06 06:05:10 +00:00
2009-06-06-ConcatVectors.ll
Fix the expansion for CONCAT_VECTORS so that it doesn't create illegal
2009-06-06 07:08:26 +00:00
2009-06-07-ExpandMMXBitcast.ll
Fix the run-line for this test to work correctly outside of x86.
2009-06-07 09:44:19 +00:00
2009-06-12-x86_64-tail-call-conv-out-of-sync-bug.ll
Fix Bug 4278: X86-64 with -tailcallopt calling convention
2009-06-12 16:26:57 +00:00
2009-06-15-not-a-tail-call.ll
CheckTailCallReturnConstraints is missing a check on the
2009-06-15 14:43:36 +00:00
2009-06-18-movlp-shuffle-register.ll
Fix for PR2484: add an SSE1 pattern for a shuffle we normally prefer to
2009-06-19 07:00:55 +00:00
2009-07-06-TwoAddrAssert.ll
Avoid adding a duplicate def. This fixes PR4478.
2009-07-06 21:34:05 +00:00
2009-07-07-SplitICmp.ll
Make EXTRACT_VECTOR_ELT a bit more flexible in terms of the returned
2009-07-09 22:01:03 +00:00
2009-07-09-ExtractBoolFromVector.ll
Make EXTRACT_VECTOR_ELT a bit more flexible in terms of the returned
2009-07-09 22:01:03 +00:00
2009-07-15-CoalescerBug.ll
ShortenDeadCopySrcLiveRange needs to be more conservative in multi-kill situations.
2009-07-15 21:39:50 +00:00
2009-07-16-CoalescerBug.ll
Let callers decide the sub-register index on the def operand of rematerialized instructions.
2009-07-16 09:20:10 +00:00
2009-07-16-LoadFoldingBug.ll
With recent MC changes, RIP base register is explicitly modeled. Make sure we add it when x86 V_SET0 / V_SETALLONES (by transforming it into a constpool load) into the use instruction.
2009-07-16 18:44:05 +00:00
2009-07-17-StackColoringBug.ll
Fix pr4552. Stack slot coloring with register must take care not to generate illegal ams.
2009-07-17 22:42:51 +00:00
2009-07-19-AsmExtraOperands.ll
Fix http://llvm.org/bugs/show_bug.cgi?id=4583
2009-07-19 19:09:59 +00:00
2009-07-20-CoalescerBug.ll
Fix some sub-reg coalescing bugs where the coalescer wasn't updating the resulting interval's register class.
2009-07-20 19:47:55 +00:00
2009-07-20-DAGCombineBug.ll
Fix a dagga combiner bug: avoid creating illegal constant.
2009-07-21 05:40:15 +00:00
2009-08-02-mmx-scalar-to-vector.ll
Use movq to move 64 bits in and out of mmx registers.
2009-08-03 02:45:34 +00:00
2009-08-06-branchfolder-crash.ll
Fix PR 4626, a crash in branch folding after OptimizeBlock
2009-08-06 22:56:40 +00:00
2009-08-06-inlineasm.ll
Add the testcase from PR 4668. This works at the
2009-08-07 00:04:42 +00:00
2009-08-08-CastError.ll
Do not generate 32-bit call on win64 when imm does not fit
2009-08-07 23:59:21 +00:00
20090313-signext.ll
Revert 67132. This is breaking some objective-c apps.
2009-03-25 20:20:11 +00:00
abi-isel.ll
fix x86-64 static codegen to materialize the address of a global with movl instead
2009-07-11 23:17:29 +00:00
add-trick32.ll
add-trick64.ll
add-with-overflow.ll
Second attempt:
2009-04-29 00:15:41 +00:00
aliases.ll
CodeGen still defaults to non-verbose asm, but llc now overrides it and default to verbose.
2009-03-25 01:47:28 +00:00
aligned-comm.ll
all-ones-vector.ll
alloca-align-rounding.ll
this is apparently passing now. Evan/Dan, please check
2009-03-17 20:23:43 +00:00
and-or-fold.ll
and-su.ll
Fix a TargetLowering optimization so that it doesn't duplicate
2009-04-03 20:11:30 +00:00
anyext-uses.ll
Generalize ExtendUsesToFormExtLoad to be usable for ANY_EXTEND,
2009-04-09 03:51:29 +00:00
arg-cast.ll
asm-block-labels.ll
asm-global-imm.ll
asm-indirect-mem.ll
asm-modifier-P.ll
We get the P modifier wrong in a lot of cases, just add some more rigorous testing.
2009-07-11 08:30:22 +00:00
atomic_add.ll
Optimize some common usage patterns of atomic built-ins __sync_add_and_fetch() and __sync_sub_and_fetch.
2009-07-30 08:33:02 +00:00
atomic_op.ll
Atomics-32.ll
Help DejaGnu avoid pipe-jam by producing less output from certain test cases.
2009-05-16 00:34:42 +00:00
Atomics-64.ll
Help DejaGnu avoid pipe-jam by producing less output from certain test cases.
2009-05-16 00:34:42 +00:00
avoid-lea-scale2.ll
x86 isel tweak: use lea (%reg,%reg) instead of lea (,%reg,2).
2009-07-22 23:26:55 +00:00
avoid-loop-align-2.ll
If header of inner loop is aligned, do not align the outer loop header. We don't want to add nops in the outer loop for the sake of aligning the inner loop.
2009-05-12 23:58:14 +00:00
avoid-loop-align.ll
Avoid inserting noop's in the middle of a loop.
2008-11-27 01:16:00 +00:00
bitcast2.ll
bitcast-int-to-vector.ll
bitcast.ll
break-anti-dependencies.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
bswap-inline-asm.ll
Recognize bswapl as bswap too.
2009-03-17 02:45:40 +00:00
bswap.ll
bt.ll
Add explicit -march=x86 to these tests so that they don't
2009-02-03 00:20:22 +00:00
byval2.ll
byval3.ll
byval4.ll
byval5.ll
byval6.ll
byval7.ll
Implement support for using modeling implicit-zero-extension on x86-64
2009-04-08 00:15:30 +00:00
byval.ll
call-imm.ll
Fix test on non-darwin hosts.
2009-05-20 05:45:36 +00:00
call-push.ll
change-compare-stride-0.ll
Permit ChangeCompareStride to rewrite a comparison when the factor
2009-04-27 20:35:32 +00:00
change-compare-stride-1.ll
Permit ChangeCompareStride to rewrite a comparison when the factor
2009-04-27 20:35:32 +00:00
clz.ll
cmp0.ll
cmp1.ll
cmp2.ll
cmp-test.ll
coalesce-esp.ll
Enable the new no-SP register classes by default. This is to address
2009-08-05 17:40:24 +00:00
coalescer-commute1.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
coalescer-commute2.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
coalescer-commute3.ll
coalescer-commute4.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
coalescer-commute5.ll
coalescer-cross.ll
Enable cross register class coalescing.
2009-07-18 02:10:10 +00:00
coalescer-remat.ll
code_placement.ll
Enable loop bb placement optimization.
2009-05-08 23:35:49 +00:00
codegen-prepare-cast.ll
Fix CodeGenPrepare's address-mode sinking to handle unusual
2009-06-02 21:29:13 +00:00
codemodel.ll
Add tests for X86-64 code model handling. Small and kernel for now.
2009-08-06 12:25:20 +00:00
combine-lds.ll
combiner-aa-0.ll
Fix a bug in x86's PreprocessForRMW logic that was exposed
2009-08-06 09:22:57 +00:00
commute-cmov.ll
Make x86's BT instruction matching more thorough, and add some
2009-01-29 01:59:02 +00:00
commute-intrinsic.ll
commute-two-addr.ll
compare_folding.ll
compare-add.ll
compiler_used.ll
implement a new magic global "llvm.compiler.used" which is like llvm.used, but
2009-07-20 06:14:25 +00:00
complex-fca.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
const-select.ll
Revert 67132. This is breaking some objective-c apps.
2009-03-25 20:20:11 +00:00
constant-pool-remat-0.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
constpool.ll
testcase for PR4466
2009-06-27 01:33:35 +00:00
convert-2-addr-3-addr-inc64.ll
rename test to avoid messing with tab completion of dates.
2009-02-12 06:54:55 +00:00
copysign-zero.ll
critical-edge-split.ll
Explicitly pass -tailcallopt=false to these tests so that they
2009-04-23 19:39:41 +00:00
cstring.ll
GV with null value initializer shouldn't go to BSS if it's meant for a mergeable strings section. Currently it only checks for Darwin. Someone else please check if it should apply to other targets as well.
2009-02-18 02:19:52 +00:00
dag-rauw-cse.ll
At Nick Lewycky's request, rename this test with a more informative name.
2009-01-26 21:36:31 +00:00
dagcombine-buildvector.ll
Adapt the x86 build_vector dagcombine to the current state of the legalizer.
2009-06-05 21:37:30 +00:00
dagcombine-cse.ll
darwin-bzero.ll
darwin-no-dead-strip.ll
darwin-stub.ll
dg.exp
div_const.ll
divrem.ll
dll-linkage.ll
we have no tests for dllimport/export. Add one.
2009-07-09 00:53:44 +00:00
dollar-name.ll
dyn-stackalloc.ll
Fully escape the grep string for this test.
2009-04-08 00:54:40 +00:00
empty-struct-return-type.ll
reduce testcase.
2009-08-06 16:14:33 +00:00
epilogue.ll
extend.ll
extern_weak.ll
extmul64.ll
extmul128.ll
extract-combine.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
extract-extract.ll
Fix a bug in the DAGCombiner's handling of multiple linked
2009-08-10 23:43:19 +00:00
extractelement-from-arg.ll
extractelement-load.ll
Yonah does not support x86-64. Change the -mcpu value to one that does.
2009-02-02 22:50:08 +00:00
extractelement-shuffle.ll
Fixed a bug when trying to optimize a extract vector element of a
2008-12-10 03:59:02 +00:00
extractps.ll
fabs.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fast-cc-callee-pops.ll
fast-cc-merge-stack-adj.ll
fast-cc-pass-in-regs.ll
fast-isel-bail.ll
Second attempt:
2009-04-29 00:15:41 +00:00
fast-isel-bc.ll
Teach X86FastISel how to handle CCValAssign::BCvt, which is used for
2009-08-05 05:33:42 +00:00
fast-isel-call.ll
fast-isel-constpool.ll
Fix yet-another bug I introduced into fastisel, this time handling
2009-07-02 03:14:25 +00:00
fast-isel-gep-sext.ll
Second attempt:
2009-04-29 00:15:41 +00:00
fast-isel-gv.ll
@GOTPCREL is also rip-relative. Fix fast-isel to do the right thing.
2009-07-02 04:22:01 +00:00
fast-isel-i1.ll
Fix FastISel's assumption that i1 values are always zero-extended
2009-03-13 20:42:20 +00:00
fast-isel-mem.ll
fast-isel-phys.ll
Improve FastISel's handling of truncates to i1, and implement
2009-03-13 23:53:06 +00:00
fast-isel-shift-imm.ll
Second attempt:
2009-04-29 00:15:41 +00:00
fast-isel-tailcall.ll
X86FastISel doesn't support the -tailcallopt ABI.
2009-05-04 19:50:33 +00:00
fast-isel-tls.ll
Fast-isel can't do TLS yet, so it should fall back to SDISel
2009-02-23 22:03:08 +00:00
fast-isel-trunc.ll
Improve FastISel's handling of truncates to i1, and implement
2009-03-13 23:53:06 +00:00
fast-isel.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fastcall-correct-mangling.ll
Pass target triple string in to TargetMachine constructor.
2009-08-03 04:03:51 +00:00
fastcc-2.ll
fastcc-byval.ll
Explicitly pass -tailcallopt=false to these tests so that they
2009-04-23 19:39:41 +00:00
fastcc-sret.ll
Explicitly pass -tailcallopt=false to these tests so that they
2009-04-23 19:39:41 +00:00
fastcc.ll
field-extract-use-trunc.ll
fildll.ll
fmul-zero.ll
Update this test to use fmul instead of mul.
2009-06-15 22:49:34 +00:00
fold-add.ll
Enhance address-mode folding of ISD::ADD to handle cases where the
2009-03-13 02:25:09 +00:00
fold-and-shift.ll
fold-call-2.ll
fold-call-3.ll
Enhance logic in X86DAGToDAGISel::PreprocessForRMW which move load inside callseq_start to allow it to be folded into a call. It was not considering the cases where a token factor is between the load and the callseq_start.
2009-01-26 18:43:34 +00:00
fold-call.ll
fold-imm.ll
On x86 favors folding short immediate into some arithmetic operations (e.g. add, and, xor, etc.) because materializing an immediate in a register is expensive in turns of code size.
2008-11-27 00:49:46 +00:00
fold-load.ll
Add -march=x86.
2008-11-27 00:37:06 +00:00
fold-mul-lohi.ll
Add nounwind to this test.
2009-05-13 22:29:12 +00:00
fold-pcmpeqd-0.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fold-pcmpeqd-1.ll
Mark x86's V_SET0 and V_SETALLONES with isSimpleLoad, and teach X86's
2008-12-03 05:21:24 +00:00
fold-pcmpeqd-2.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fold-sext-trunc.ll
When transforming sext(trunc(load(x))) into sext(smaller load(x)),
2009-04-27 02:00:55 +00:00
fp2sint.ll
fp_constant_op.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fp_load_cast_fold.ll
fp_load_fold.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fp-immediate-shorten.ll
fp-in-intregs.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fp-stack-2results.ll
fp-stack-compare.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
fp-stack-direct-ret.ll
fp-stack-ret-conv.ll
fp-stack-ret-store.ll
fp-stack-ret.ll
fp-stack-retcopy.ll
fp-stack-set-st1.ll
Implement FpSET_ST1_*.
2009-02-09 23:32:07 +00:00
fsxor-alignment.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
full-lsr.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
ga-offset.ll
For Darwin / x86_64, override -relocation-model=static to pic if the output is assembly since Darwin assembler does not really support -static codeine.
2009-06-03 21:13:54 +00:00
global-sections-tls.ll
Fix PR4639, a ELF-TLS regression from some of my refactoring.
2009-07-28 17:57:51 +00:00
global-sections.ll
Make the big switch: Change MCSectionMachO to represent a section *semantically*
2009-08-10 01:39:42 +00:00
h-register-addressing-32.ll
Implement x86 h-register extract support.
2009-04-13 16:09:41 +00:00
h-register-addressing-64.ll
Implement x86 h-register extract support.
2009-04-13 16:09:41 +00:00
h-register-store.ll
Implement x86 h-register extract support.
2009-04-13 16:09:41 +00:00
h-registers-0.ll
When the result of an EXTRACT_SUBREG, INSERT_SUBREG, or SUBREG_TO_REG
2009-04-14 22:17:14 +00:00
h-registers-1.ll
When the result of an EXTRACT_SUBREG, INSERT_SUBREG, or SUBREG_TO_REG
2009-04-14 22:17:14 +00:00
h-registers-2.ll
Fix the RUN lines so that this test actually tests.
2009-04-14 22:50:17 +00:00
h-registers-3.ll
More h-registers tricks: folding zext nodes.
2009-05-29 01:44:43 +00:00
hidden-vis-2.ll
Re-did 60519. It turns out Darwin's handling of hidden visibility symbols are a bit more complicate than I expected. Both declarations and weak definitions still need a stub indirection. However, the stubs are in data section and they contain the addresses of the actual symbols.
2008-12-05 01:06:39 +00:00
hidden-vis-3.ll
Re-did 60519. It turns out Darwin's handling of hidden visibility symbols are a bit more complicate than I expected. Both declarations and weak definitions still need a stub indirection. However, the stubs are in data section and they contain the addresses of the actual symbols.
2008-12-05 01:06:39 +00:00
hidden-vis-4.ll
Re-did 60519. It turns out Darwin's handling of hidden visibility symbols are a bit more complicate than I expected. Both declarations and weak definitions still need a stub indirection. However, the stubs are in data section and they contain the addresses of the actual symbols.
2008-12-05 01:06:39 +00:00
hidden-vis.ll
i2k.ll
i64-mem-copy.ll
Typo.
2009-03-12 17:07:39 +00:00
i128-and-beyond.ll
i128-immediate.ll
i128-mul.ll
i128-ret.ll
i256-add.ll
iabs.ll
illegal-asm.ll
Update test for pr3864.
2009-03-23 18:27:36 +00:00
illegal-insert.ll
illegal-vector-args-return.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
imp-def-copies.ll
imul-lea-2.ll
Optimize some 64-bit multiplication by constants into two lea's or one lea + shl since imulq is slow (latency 5). e.g.
2009-03-28 05:57:29 +00:00
imul-lea.ll
inline-asm-2addr.ll
Turn a 2-address instruction into a 3-address one when it's profitable even if the two-address operand is killed.
2009-03-30 21:34:07 +00:00
inline-asm-flag-clobber.ll
Rename test.
2009-03-04 02:47:25 +00:00
inline-asm-fpstack2.ll
Fix PR4185.
2009-06-21 12:02:51 +00:00
inline-asm-fpstack3.ll
FIX PR 4459.
2009-06-29 20:29:59 +00:00
inline-asm-fpstack4.ll
Fix PR4485.
2009-06-30 16:40:03 +00:00
inline-asm-fpstack5.ll
Fix PR4485.
2009-06-30 16:40:03 +00:00
inline-asm-fpstack.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
inline-asm-modifier-n.ll
Add x86 support for 'n' inline asm modifier. This will be handled target independently as part of MC work.
2009-06-26 22:00:19 +00:00
inline-asm-mrv.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
inline-asm-out-regs.ll
Implement x86 h-register extract support.
2009-04-13 16:09:41 +00:00
inline-asm-pic.ll
inline-asm-q-regs.ll
Fix x86 inline ams 'q' constraint support. In 32-bit mode, it's just like 'Q', i.e. EAX, EDX, ECX, EBX. In 64-bit mode, it just means all the i64r registers. Yeah, that makes sense.
2009-07-17 22:13:25 +00:00
inline-asm-tied.ll
Assume an inline asm might be a call, so we get
2009-07-16 22:34:45 +00:00
inline-asm-x-scalar.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
inline-asm.ll
ins_subreg_coalesce-1.ll
ins_subreg_coalesce-2.ll
ins_subreg_coalesce-3.ll
Enable the new no-SP register classes by default. This is to address
2009-08-05 17:40:24 +00:00
insertelement-copytoregs.ll
insertelement-legalize.ll
Added support to LegalizeType for expanding the operands of scalar to vector
2008-12-15 06:57:02 +00:00
invalid-shift-immediate.ll
isel-sink2.ll
Don't force promotion of return arguments on the callee.
2009-03-17 23:43:59 +00:00
isel-sink3.ll
On x86 favors folding short immediate into some arithmetic operations (e.g. add, and, xor, etc.) because materializing an immediate in a register is expensive in turns of code size.
2008-11-27 00:49:46 +00:00
isel-sink.ll
isint.ll
isnan2.ll
isnan.ll
ispositive.ll
iv-users-in-other-loops.ll
Revert the addition of hasNoPointerOverflow to GEPOperator.
2009-07-20 17:43:30 +00:00
jump_sign.ll
ldzero.ll
lea-2.ll
lea-3.ll
Fix MatchAddress bug that's preventing negative displacement from being folded in 64-bit mode.
2009-01-17 07:09:27 +00:00
lea-4.ll
Fix MatchAddress bug that's preventing negative displacement from being folded in 64-bit mode.
2009-01-17 07:09:27 +00:00
lea-neg.ll
Make this grep line a little more specific so that it doesn't
2009-05-11 18:49:56 +00:00
lea-recursion.ll
lea.ll
legalizedag_vec.ll
Make the grep line in this test more specific, to avoid
2009-07-22 22:02:42 +00:00
lfence.ll
limited-prec.ll
Now with RUN line.
2009-01-21 21:28:03 +00:00
live-out-reg-info.ll
Fix live-out reg logic to not insert over-aggressive AssertZExt
2009-03-31 01:38:29 +00:00
local-liveness.ll
Remove the FlaggedNodes member from SUnit. Instead of requiring each SUnit
2008-11-13 23:24:17 +00:00
long-setcc.ll
longlong-deadload.ll
loop-hoist.ll
convert to filecheck style, simplify RUN line, and add comment.
2009-07-14 19:49:11 +00:00
loop-strength-reduce2.ll
loop-strength-reduce3.ll
loop-strength-reduce4.ll
loop-strength-reduce5.ll
loop-strength-reduce6.ll
loop-strength-reduce7.ll
Fix strange logic in CollectIVUsers used to determine whether all uses are
2009-02-20 22:16:49 +00:00
loop-strength-reduce8.ll
Teach LSR sink to sink the immediate portion of the common expression back into uses if they fit in address modes of all the uses.
2009-02-21 02:06:47 +00:00
loop-strength-reduce-2.ll
Teach LSR sink to sink the immediate portion of the common expression back into uses if they fit in address modes of all the uses.
2009-02-21 02:06:47 +00:00
loop-strength-reduce-3.ll
Make LoopStrengthReduce smarter about hoisting things out of
2008-12-05 21:47:27 +00:00
loop-strength-reduce.ll
Make LoopStrengthReduce smarter about hoisting things out of
2008-12-05 21:47:27 +00:00
lsr-loop-exit-cond.ll
Teach LSR to optimize more loop exit compares, i.e. change them to use postinc iv value. Previously LSR would only optimize those which are in the loop latch block. However, if LSR can prove it is safe (and profitable), it's now possible to change those not in the latch blocks to use postinc values.
2009-05-11 22:33:01 +00:00
lsr-negative-stride.ll
Teach LSR to optimize more loop exit compares, i.e. change them to use postinc iv value. Previously LSR would only optimize those which are in the loop latch block. However, if LSR can prove it is safe (and profitable), it's now possible to change those not in the latch blocks to use postinc values.
2009-05-11 22:33:01 +00:00
lsr-sort.ll
Fix LSR's IV sorting function to explicitly sort by bitwidth
2009-02-13 00:26:43 +00:00
masked-iv-safe.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
masked-iv-unsafe.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
maskmovdqu.ll
Handle llvm.x86.sse2.maskmov.dqu in 64-bit.
2009-02-10 22:06:28 +00:00
memcpy-2.ll
memcpy.ll
memmove-0.ll
memmove-1.ll
memmove-2.ll
memmove-3.ll
memmove-4.ll
memset64-on-x86-32.ll
memset-2.ll
Pass target triple string in to TargetMachine constructor.
2009-08-03 04:03:51 +00:00
memset.ll
mfence.ll
mingw-alloca.ll
mmx-arg-passing2.ll
mmx-arg-passing.ll
mmx-arith.ll
mmx-bitcast-to-i64.ll
Use movd instead of movq
2009-08-03 05:21:05 +00:00
mmx-copy-gprs.ll
On x86, if the only use of a i64 load is a i64 store, generate a pair of double load and store instead.
2009-03-12 05:59:15 +00:00
mmx-emms.ll
mmx-insert-element.ll
mmx-pinsrw.ll
mmx-punpckhdq.ll
mmx-s2v.ll
mmx-shift.ll
mmx-shuffle.ll
mmx-vzmovl-2.ll
Previously, RecursivelyDeleteDeadInstructions provided an option
2009-05-02 18:29:22 +00:00
mmx-vzmovl.ll
movfs.ll
Add basic support for code generation of
2009-05-05 18:52:19 +00:00
movgs.ll
Map address space 256 to gs; similar mappings could be supported for the
2009-01-26 01:24:32 +00:00
mul64.ll
mul128.ll
mul-legalize.ll
Move 3 "(add (select cc, 0, c), x) -> (select cc, x, (add, x, c))"
2009-03-12 06:52:53 +00:00
mul-remat.ll
mul-shift-reassoc.ll
multiple-return-values-cross-block.ll
multiple-return-values.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
nancvt.ll
narrow_op-1.ll
Added optimization that narrow load / op / store and the 'op' is a bit twiddling instruction and its second operand is an immediate. If bits that are touched by 'op' can be done with a narrower instruction, reduce the width of the load and store as well. This happens a lot with bitfield manipulation code.
2009-05-28 00:35:15 +00:00
narrow_op-2.ll
Added optimization that narrow load / op / store and the 'op' is a bit twiddling instruction and its second operand is an immediate. If bits that are touched by 'op' can be done with a narrower instruction, reduce the width of the load and store as well. This happens a lot with bitfield manipulation code.
2009-05-28 00:35:15 +00:00
neg_fp.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
negate-add-zero.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
negative_zero.ll
negative-sin.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
negative-subscript.ll
Make sure constant subscript is truncated to ptr size if it may not fit.
2009-02-09 20:54:38 +00:00
nobt.ll
Make a transformation added in 63266 a bit less aggressive.
2009-02-11 19:19:41 +00:00
nofence.ll
nosse-error1.ll
add 2 more testcases for -mattr=-sse (r63495).
2009-02-01 18:24:20 +00:00
nosse-error2.ll
add 2 more testcases for -mattr=-sse (r63495).
2009-02-01 18:24:20 +00:00
nosse-varargs.ll
Implement -mno-sse: if SSE is disabled on x86-64, don't store XMM on stack for
2009-02-01 18:15:56 +00:00
omit-label.ll
If a MachineBasicBlock has multiple ways of reaching another block,
2009-05-05 21:10:19 +00:00
opt-ext-uses.ll
optimize-max-0.ll
Re-apply r73718, now that the fix in r73787 is in, and add a
2009-06-19 23:23:27 +00:00
optimize-max-1.ll
Re-apply r73718, now that the fix in r73787 is in, and add a
2009-06-19 23:23:27 +00:00
optimize-max-2.ll
Re-apply r73718, now that the fix in r73787 is in, and add a
2009-06-19 23:23:27 +00:00
or-branch.ll
overlap-shift.ll
packed_struct.ll
peep-test-0.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
peep-test-1.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
peep-test-2.ll
Arithmetic instructions don't set EFLAGS bits OF and CF bits
2009-03-07 01:58:32 +00:00
peep-vector-extract-concat.ll
peep-vector-extract-insert.ll
phys_subreg_coalesce-2.ll
Add test case from PR2659.
2009-01-09 21:01:31 +00:00
phys_subreg_coalesce.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pic_jumptable.ll
down with unwind info :)
2009-06-25 21:48:17 +00:00
pic-1.ll
unwind info not needed.
2009-06-24 19:48:04 +00:00
pic-2.ll
pic-3.ll
remove eh, convert to FileCheck style
2009-07-09 01:07:22 +00:00
pic-4.ll
pic-5.ll
pic-6.ll
pic-cpool.ll
reapply my previous patch (r66358) with a tweak to set the
2009-03-11 05:08:08 +00:00
pic-jtbl.ll
remove unwind info, add test for asmprinting of jump table labels with (%rip)
2009-06-26 22:16:49 +00:00
pic-load-remat.ll
pmul.ll
Don't use special heuristics for nodes with no data predecessors
2009-02-11 21:29:39 +00:00
postalloc-coalescing.ll
pr1462.ll
pr1489.ll
Second attempt:
2009-04-29 00:15:41 +00:00
pr1505.ll
pr1505b.ll
pr2177.ll
pr2182.ll
pr2326.ll
pr2623.ll
pr2656.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pr2659.ll
PR2659 was fixed by r61847. Add the testcase as a regression test.
2009-01-09 08:16:12 +00:00
pr2849.ll
pr2924.ll
pr2982.ll
pr3154.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pr3216.ll
Fix a dagcombine to not generate loads of non-round integer types,
2009-01-20 01:06:45 +00:00
pr3241.ll
Use the correct Preds and Succs lists in setHeightDirty()
2008-12-20 16:34:57 +00:00
pr3243.ll
Fix PR3243: a LiveVariables bug. When HandlePhysRegKill is checking whether the last reference is also the last def (i.e. dead def), it should also check if last reference is the current machine instruction being processed. This can happen when it is processing a physical register use and setting the current machine instruction as sub-register's last ref.
2009-01-20 21:25:12 +00:00
pr3244.ll
Fix PR3241: Currently EmitCopyFromReg emits a copy from the physical register to a virtual register unless it requires an expensive cross class copy. That means we are only treating "expensive to copy" register dependency as physical register dependency.
2009-01-12 03:19:55 +00:00
pr3250.ll
Fix a DAGCombiner abort on an invalid shift count constant. This fixes PR3250.
2009-01-03 19:22:06 +00:00
pr3317.ll
Simplify ReduceLoadWidth's logic: it doesn't need several different
2009-01-21 15:17:51 +00:00
pr3366.ll
Fix a recent regression. ClrOpcode is not set for i8; for i8, if
2009-01-21 14:50:16 +00:00
pr3457.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pr3495-2.ll
Remove a bogus assertion. It's possible a live-in available value is used by a previous instruction.
2009-02-11 23:41:57 +00:00
pr3495.ll
Extend ScalarEvolution's multiple-exit support to compute exact
2009-06-24 01:18:18 +00:00
pr3522.ll
Fix PR3522. It's not safe to sink into landing pad BB's.
2009-02-15 08:36:12 +00:00
pre-split1.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pre-split2.ll
Turn on machine LICM in non-fast mode.
2009-02-05 08:46:33 +00:00
pre-split3.ll
pre-split4.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pre-split5.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pre-split6.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pre-split7.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pre-split8.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pre-split9.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
pre-split10.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
prefetch.ll
private-2.ll
Reapply my previous asmprinter changes now with more testing and two
2009-07-14 18:17:16 +00:00
private.ll
Add the private linkage.
2009-01-15 20:18:42 +00:00
ptrtoint-constexpr.ll
fix a problem Eli noticed where we would compile the attached ptrtoint
2009-08-01 22:25:12 +00:00
rdtsc.ll
red-zone2.ll
Add new function attribute - noredzone.
2009-06-04 22:05:33 +00:00
red-zone.ll
Change these tests to use function attributes rather than special llc
2009-08-05 16:37:27 +00:00
regpressure.ll
rem-2.ll
DIVREM isel deficiency: If sign bit is known zero, zero out DX/EDX/RDX instead of sign extending the low part (in AX/EAX/RAX) into it.
2009-01-19 19:06:11 +00:00
rem.ll
remat-constant.ll
factor some logic out into a helper function, allow remat of loads from constant
2009-06-27 04:38:55 +00:00
remat-mov-1.ll
Teach LSR to optimize more loop exit compares, i.e. change them to use postinc iv value. Previously LSR would only optimize those which are in the loop latch block. However, if LSR can prove it is safe (and profitable), it's now possible to change those not in the latch blocks to use postinc values.
2009-05-11 22:33:01 +00:00
ret-addr.ll
Add support for non-zero __builtin_return_address values on X86.
2009-01-16 19:25:27 +00:00
ret-i64-0.ll
ret-mmx.ll
Make sure this test passes on linux-ppc.
2009-02-27 00:51:50 +00:00
rip-rel-address.ll
Darwin prepends an _ to internal globals, Linux doesn't.
2009-07-11 23:48:59 +00:00
rodata-relocs.ll
Tweak test for recent relro stuff
2009-03-30 15:28:40 +00:00
rot16.ll
rot32.ll
rot64.ll
rotate2.ll
rotate.ll
scalar_sse_minmax.ll
scalar-extract.ll
Simplify extract element of a scalar to vector.
2009-01-17 00:07:25 +00:00
scalar-min-max-fill-operand.ll
scalarize-bitcast.ll
When scalarizing a vector BITCAST, check whether the operand has vector
2009-05-11 18:30:42 +00:00
scev-interchange.ll
Tidy up this testcase.
2009-08-06 17:11:55 +00:00
select-no-cmov.ll
generalize the previous code to use the full generality of LEA
2009-03-13 05:53:31 +00:00
select-zero-one.ll
select.ll
setoeq.ll
setuge.ll
sext-load.ll
sext-ret-val.ll
Add a test case for PR3779: when to promote the function return value.
2009-03-25 20:30:19 +00:00
sext-select.ll
sext-trunc.ll
Revert 67132. This is breaking some objective-c apps.
2009-03-25 20:20:11 +00:00
sfence.ll
shift-and.ll
shift-coalesce.ll
shift-codegen.ll
shift-combine.ll
shift-double.ll
shift-folding.ll
shift-i128.ll
Fully general expansion of integer shift of any size.
2009-03-31 19:39:24 +00:00
shift-i256.ll
Fully general expansion of integer shift of any size.
2009-03-31 19:39:24 +00:00
shift-one.ll
shl_elim.ll
shrink-fp-const1.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
shrink-fp-const2.ll
sincos.ll
small-byval-memcpy.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
smul-with-overflow-2.ll
Implement multiple with overflow by 2 with an add instruction.
2009-01-27 03:30:42 +00:00
smul-with-overflow-3.ll
Teach LowerBRCOND to recognize (xor (setcc x), 1). The xor inverts the condition. It's normally transformed by the dag combiner, unless the condition is set by a arithmetic op with overflow.
2009-02-02 08:07:36 +00:00
smul-with-overflow.ll
- Use patterns instead of creating completely new instruction matching patterns,
2008-12-12 21:15:41 +00:00
soft-fp.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
split-eh-lpad-edges.ll
Revert 67132. This is breaking some objective-c apps.
2009-03-25 20:20:11 +00:00
split-select.ll
split-vector-rem.ll
sret.ll
sse41.ll
Add a couple more tests for the ptest intrinsics to make sure we're
2009-07-29 00:51:15 +00:00
sse42.ll
Add crc32 instruction and intrinsics. Add a new class of prefix
2009-08-08 21:55:08 +00:00
sse_reload_fold.ll
Don't use special heuristics for nodes with no data predecessors
2009-02-11 21:29:39 +00:00
sse-align-0.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
sse-align-1.ll
sse-align-2.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
sse-align-3.ll
sse-align-4.ll
sse-align-5.ll
sse-align-6.ll
sse-align-7.ll
sse-align-8.ll
sse-align-9.ll
sse-align-10.ll
sse-align-11.ll
sse-align-12.ll
sse-fcopysign.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
sse-load-ret.ll
sse-varargs.ll
stack-align.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
stack-color-with-reg-2.ll
Fixed a stack slot coloring with reg bug: do not update implicit use / def when doing forward / backward propagation.
2009-05-12 18:31:57 +00:00
stack-color-with-reg.ll
Enable the new no-SP register classes by default. This is to address
2009-08-05 17:40:24 +00:00
store_op_load_fold2.ll
store_op_load_fold.ll
store-fp-constant.ll
store-global-address.ll
storetrunc-fp.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
stride-nine-with-base-reg.ll
Expand GEPs in ScalarEvolution expressions. SCEV expressions can now
2009-04-16 03:18:22 +00:00
stride-reuse.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
sub-with-overflow.ll
X86_COND_C and X86_COND_NC are alternate mnemonics for
2009-01-07 00:15:08 +00:00
subclass-coalesce.ll
Cross RC coalescing is now on by default.
2009-07-21 00:22:59 +00:00
subreg-to-reg-0.ll
subreg-to-reg-1.ll
Fix PR3934 part 2. findOnlyInterestingUse() was not setting IsCopy and IsDstPhys which are returned by value and used by callee. This happened to work on the earlier test cases because of a logic error in the caller side.
2009-04-14 00:32:25 +00:00
subreg-to-reg-2.ll
Do not fold away subreg_to_reg if the source register has a sub-register index. That means the source register is taking a sub-register of a larger register. e.g. On x86
2009-03-23 07:19:58 +00:00
subreg-to-reg-3.ll
Implement support for using modeling implicit-zero-extension on x86-64
2009-04-08 00:15:30 +00:00
subreg-to-reg-4.ll
Implement support for using modeling implicit-zero-extension on x86-64
2009-04-08 00:15:30 +00:00
subreg-to-reg-5.ll
Factor the code for collecting IV users out of LSR into an IVUsers class,
2009-05-12 02:17:14 +00:00
subreg-to-reg-6.ll
Implement support for using modeling implicit-zero-extension on x86-64
2009-04-08 00:15:30 +00:00
switch-zextload.ll
Generalize ExtendUsesToFormExtLoad to be usable for ANY_EXTEND,
2009-04-09 03:51:29 +00:00
swizzle.ll
The memory alignment requirement on some of the mov{h|l}p{d|s} patterns are 16-byte. That is overly strict. These instructions read / write f64 memory locations without alignment requirement.
2009-01-28 08:35:02 +00:00
tailcall1.ll
tailcall-i1.ll
Enable tail call optimization for functions that return a struct (bug 3664) and for functions that return types that need extending (e.g i1).
2009-03-28 08:33:27 +00:00
tailcall-stackalign.ll
tailcall-structret.ll
Enable tail call optimization for functions that return a struct (bug 3664) and for functions that return types that need extending (e.g i1).
2009-03-28 08:33:27 +00:00
tailcall-void.ll
Make check in CheckTailCallReturnConstraints for ignorable instructions between
2009-03-28 12:36:29 +00:00
tailcallbyval64.ll
tailcallbyval.ll
Fix byval arguments in the fastcc calling convention. The fastcc convention
2008-12-03 01:28:04 +00:00
tailcallfp2.ll
tailcallfp.ll
tailcallpic1.ll
tailcallpic2.ll
tailcallstack64.ll
Major calling convention code refactoring.
2009-08-05 01:29:28 +00:00
test-nofold.ll
testl-commute.ll
add a testcase.
2009-01-07 01:48:08 +00:00
tls1.ll
no need for unwind info here.
2009-06-20 19:43:09 +00:00
tls2.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls3.ll
Reimplement rip-relative addressing in the X86-64 backend. The new
2009-06-27 04:16:01 +00:00
tls4.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls5.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls6.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls7.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls8.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls9.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls10.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls11.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls12.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls13.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls14.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls15.ll
X86-64 TLS support for local exec and initial exec.
2009-04-13 13:02:49 +00:00
tls-pic.ll
rename test
2009-08-07 23:57:30 +00:00
trap.ll
trunc-to-bool.ll
When promoting the result of fp_to_uint/fp_to_sint,
2008-11-10 17:28:30 +00:00
twoaddr-coalesce-2.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
twoaddr-coalesce.ll
Implement support for using modeling implicit-zero-extension on x86-64
2009-04-08 00:15:30 +00:00
twoaddr-delete.ll
If two-address def is dead and the instruction does not define other registers, and it doesn't produce side effects, just delete the instruction.
2009-02-21 03:14:25 +00:00
twoaddr-pass-sink.ll
twoaddr-remat.ll
uint_to_fp-2.ll
Make linear scan's trivial coalescer slightly more aggressive.
2009-01-20 00:16:18 +00:00
uint_to_fp.ll
Now not UINT_TO_FP is legal (it's marked custom), dag combiner won't
2009-01-19 08:08:22 +00:00
umul-with-carry.ll
- Use patterns instead of creating completely new instruction matching patterns,
2008-12-12 21:15:41 +00:00
umul-with-overflow.ll
Add some generic expansion logic for SMULO and UMULO. Fixes UMULO
2009-06-16 06:58:29 +00:00
urem-i8-constant.ll
Fix for PR2164: allow transforming arbitrary-width unsigned divides into
2008-11-30 06:02:26 +00:00
v4f32-immediate.ll
variable-sized-darwin-bzero.ll
variadic-node-pic.ll
vec_add.ll
vec_align.ll
vec_call.ll
vec_clear.ll
2nd attempt, fixing SSE4.1 issues and implementing feedback from duncan.
2009-04-27 18:41:29 +00:00
vec_compare.ll
add some more check for vector compares.
2009-07-08 18:51:25 +00:00
vec_ctbits.ll
vec_extract-sse4.ll
vec_extract.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_fneg.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_i64.ll
Added a x86 dag combine to increase the chances to use a
2009-04-03 02:43:30 +00:00
vec_ins_extract-1.ll
make these tests pass when run on a G5.
2009-02-20 07:10:11 +00:00
vec_ins_extract.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_insert_4.ll
vec_insert-2.ll
Use movaps / movd to extract vector element 0 even with sse4.1. It's still cheaper than pextrw especially if the value is in memory.
2009-01-02 05:29:08 +00:00
vec_insert-3.ll
Use movaps / movd to extract vector element 0 even with sse4.1. It's still cheaper than pextrw especially if the value is in memory.
2009-01-02 05:29:08 +00:00
vec_insert-5.ll
vec_insert-6.ll
vec_insert-7.ll
vec_insert-8.ll
Expand insert/extract of a <4 x i32> with a variable index.
2009-01-15 21:10:20 +00:00
vec_insert.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_loadhl.ll
vec_loadsingles.ll
Slightly generalize the code that handles shuffles of consecutive loads
2009-06-07 06:52:44 +00:00
vec_logical.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_return.ll
vec_select.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_set-2.ll
vec_set-3.ll
vec_set-4.ll
vec_set-5.ll
Slightly generalize the code that handles shuffles of consecutive loads
2009-06-07 06:52:44 +00:00
vec_set-6.ll
Slightly generalize the code that handles shuffles of consecutive loads
2009-06-07 06:52:44 +00:00
vec_set-7.ll
vec_set-8.ll
vec_set-9.ll
vec_set-A.ll
vec_set-B.ll
vec_set-C.ll
vec_set-D.ll
vec_set-E.ll
vec_set-F.ll
vec_set-G.ll
vec_set-H.ll
vec_set-I.ll
vec_set-J.ll
vec_set.ll
vec_shift2.ll
vec_shift3.ll
vec_shift.ll
vec_shuffle-2.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-3.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_shuffle-4.ll
vec_shuffle-5.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_shuffle-6.ll
vec_shuffle-7.ll
vec_shuffle-8.ll
vec_shuffle-9.ll
vec_shuffle-10.ll
2nd attempt, fixing SSE4.1 issues and implementing feedback from duncan.
2009-04-27 18:41:29 +00:00
vec_shuffle-11.ll
vec_shuffle-12.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-13.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-14.ll
vec_shuffle-15.ll
vec_shuffle-16.ll
2nd attempt, fixing SSE4.1 issues and implementing feedback from duncan.
2009-04-27 18:41:29 +00:00
vec_shuffle-17.ll
vec_shuffle-18.ll
vec_shuffle-19.ll
vec_shuffle-20.ll
vec_shuffle-21.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-22.ll
Fix infinite recursion in the C++ code which handles movddup by making it unnecessary.
2009-04-29 22:47:44 +00:00
vec_shuffle-23.ll
vec_shuffle-24.ll
vec_shuffle-25.ll
Improved shuffle normalization to avoid using extract/build when we
2008-11-16 05:06:27 +00:00
vec_shuffle-26.ll
Improved shuffle normalization to avoid using extract/build when we
2008-11-16 05:06:27 +00:00
vec_shuffle-27.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_shuffle-28.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-29.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-30.ll
2nd attempt, fixing SSE4.1 issues and implementing feedback from duncan.
2009-04-27 18:41:29 +00:00
vec_shuffle-31.ll
2nd attempt, fixing SSE4.1 issues and implementing feedback from duncan.
2009-04-27 18:41:29 +00:00
vec_shuffle-32.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-33.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-34.ll
Generate better code for v8i16 shuffles on SSE2
2009-02-23 08:49:38 +00:00
vec_shuffle-35.ll
Use the -stack-alignment option instead of using a target triple
2009-02-23 16:34:46 +00:00
vec_shuffle-36.ll
Fixed a v8i16 shuffle case that should generate a pshufb instead of a pshuflw/hw.
2009-03-11 06:35:11 +00:00
vec_shuffle-37.ll
For yonah, fix a vector shuffle case for v16i8 where we didn't properly clear some bits.
2009-03-11 18:47:57 +00:00
vec_shuffle.ll
Fix infinite recursion in the C++ code which handles movddup by making it unnecessary.
2009-04-29 22:47:44 +00:00
vec_splat-2.ll
vec_splat-3.ll
Added shuffle and splat test cases for r61365.
2008-12-23 04:05:08 +00:00
vec_splat-4.ll
Added shuffle and splat test cases for r61365.
2008-12-23 04:05:08 +00:00
vec_splat.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_ss_load_fold.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vec_zero_cse.ll
vec_zero-2.ll
vec_zero.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vector-intrinsics.ll
vector-rem.ll
vector-variable-idx.ll
vector.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
vfcmp.ll
eliminate the v[if]cmp versions of these tests, now that [if]cmp+sext works.
2009-07-08 00:49:35 +00:00
volatile.ll
Second attempt:
2009-04-29 00:15:41 +00:00
vortex-bug.ll
vshift_scalar.ll
Added support for splitting and scalarizing vector shifts.
2008-12-15 21:44:00 +00:00
vshift_split2.ll
make these tests pass when run on a G5.
2009-02-20 07:10:11 +00:00
vshift_split.ll
Fix getNode to allow a vector for the shift amount for shifts of vectors.
2008-12-09 05:46:39 +00:00
vshift-1.ll
Added sse test patterns for r62979 and r63193.
2009-01-28 08:13:56 +00:00
vshift-2.ll
Added sse test patterns for r62979 and r63193.
2009-01-28 08:13:56 +00:00
vshift-3.ll
Added sse test patterns for r62979 and r63193.
2009-01-28 08:13:56 +00:00
vshift-4.ll
Added sse test patterns for r62979 and r63193.
2009-01-28 08:13:56 +00:00
weak.ll
wide-integer-fold.ll
Fix a few places in DAGCombiner that were creating all-ones-bits
2009-08-06 09:18:59 +00:00
widen_arith-1.ll
Use movaps / movd to extract vector element 0 even with sse4.1. It's still cheaper than pextrw especially if the value is in memory.
2009-01-02 05:29:08 +00:00
widen_arith-2.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_arith-3.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_arith-4.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_arith-5.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_arith-6.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
widen_cast-1.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_cast-2.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_cast-3.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_cast-4.ll
Fix test to account for legalization changes; I think this ends up
2009-05-23 13:15:11 +00:00
widen_cast-5.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_cast-6.ll
Added missing support to widen an operand from a bit convert.
2009-01-15 22:43:38 +00:00
widen_conv-1.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_conv-2.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_conv-3.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_conv-4.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_select-1.ll
Added some basic test cases for r61209
2008-12-18 20:05:58 +00:00
widen_shuffle-1.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
widen_shuffle-2.ll
Split the Add, Sub, and Mul instruction opcodes into separate
2009-06-04 22:49:04 +00:00
x86-64-and-mask.ll
x86-64-arg.ll
x86-64-asm.ll
x86-64-dead-stack-adjust.ll
x86-64-disp.ll
x86-64-frameaddr.ll
x86-64-gv-offset.ll
x86-64-malloc.ll
Fix codegen to compute the size of an allocation by multiplying the
2009-03-17 19:36:00 +00:00
x86-64-mem.ll
x86-64-pic-1.ll
x86-64-pic-2.ll
x86-64-pic-3.ll
x86-64-pic-4.ll
x86-64-pic-5.ll
x86-64-pic-6.ll
remove some unneeded eh info.
2009-06-27 04:07:31 +00:00
x86-64-pic-7.ll
remove some unneeded eh info.
2009-06-27 04:07:31 +00:00
x86-64-pic-8.ll
x86-64-pic-9.ll
remove some unneeded eh info.
2009-06-27 04:07:31 +00:00
x86-64-pic-10.ll
x86-64-pic-11.ll
Add nounwind to this test.
2009-08-01 19:11:04 +00:00
x86-64-ret0.ll
x86-64-shortint.ll
x86-64-sret-return.ll
Enable cross register class coalescing.
2009-07-18 02:10:10 +00:00
x86-64-varargs.ll
x86-frameaddr2.ll
x86-frameaddr.ll
x86-store-gv-addr.ll
Revert r72734. The Darwin assembler doesn't support the static
2009-06-03 00:37:20 +00:00
xmm-r64.ll
xor_not.ll
Favors generating "not" over "xor -1". For example.
2009-01-21 02:09:05 +00:00
xor-undef.ll
xorl.ll
zero-remat.ll
convert a test to "FileCheck" style.
2009-07-08 18:48:24 +00:00
zext-inreg-0.ll
zext-inreg-1.ll