When these instructions are encoded in VEX (on AVX) there is no such requirement. This changes the folding
tables and removes the alignment restrictions from VEX-encoded instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171024 91177308-0d34-0410-b5e6-96231b3b80d8
pmuludq is slow, but it turns out that all the unpacking and packing of the
scalarized mul is even slower. 10% speedup on loop-vectorized paq8p.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170985 91177308-0d34-0410-b5e6-96231b3b80d8
Also loosen the SSSE3 dependency a bit, expanded pshufb + psra is still better
than scalarized loads. Fixes PR14590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170984 91177308-0d34-0410-b5e6-96231b3b80d8
The only way to read the eflags is using push and pop. If we don't
adjust the stack then we run over the first frame index. This is
not something that we want to do, so we have to make sure that
our machine function does not copy the flags. If it does then
we have to emit the prolog that adjusts the stack.
rdar://12896831
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170961 91177308-0d34-0410-b5e6-96231b3b80d8
We match the pattern "x >= y ? x-y : 0" into "subus x, y" and two special cases
if y is a constant. DAGCombiner canonicalizes those so we first have to undo the
canonicalization for those cases. The pattern occurs in gzip when the loop
vectorizer is enabled. Part of PR14613.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170273 91177308-0d34-0410-b5e6-96231b3b80d8
try to reduce the width of this load, and would end up transforming:
(truncate (lshr (sextload i48 <ptr> as i64), 32) to i32)
to
(truncate (zextload i32 <ptr+4> as i64) to i32)
We lost the sext attached to the load while building the narrower i32
load, and replaced it with a zext because lshr always zext's the
results. Instead, bail out of this combine when there is a conflict
between a sextload and a zext narrowing. The rest of the DAG combiner
still optimize the code down to the proper single instruction:
movswl 6(...),%eax
Which is exactly what we wanted. Previously we read past the end *and*
missed the sign extension:
movl 6(...), %eax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169802 91177308-0d34-0410-b5e6-96231b3b80d8
This shouldn't affect codegen for -O0 compiles as tail call markers are not
emitted in unoptimized compiles. Testing with the external/internal nightly
test suite reveals no change in compile time performance. Testing with -O1,
-O2 and -O3 with fast-isel enabled did not cause any compile-time or
execution-time failures. All tests were performed on my x86 machine.
I'll monitor our arm testers to ensure no regressions occur there.
In an upcoming clang patch I will be marking the objc_autoreleaseReturnValue
and objc_retainAutoreleaseReturnValue as tail calls unconditionally. While
it's theoretically true that this is just an optimization, it's an
optimization that we very much want to happen even at -O0, or else ARC
applications become substantially harder to debug.
Part of rdar://12553082
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169796 91177308-0d34-0410-b5e6-96231b3b80d8
1. Teach it to use overlapping unaligned load / store to copy / set the trailing
bytes. e.g. On 86, use two pairs of movups / movaps for 17 - 31 byte copies.
2. Use f64 for memcpy / memset on targets where i64 is not legal but f64 is. e.g.
x86 and ARM.
3. When memcpy from a constant string, do *not* replace the load with a constant
if it's not possible to materialize an integer immediate with a single
instruction (required a new target hook: TLI.isIntImmLegal()).
4. Use unaligned load / stores more aggressively if target hooks indicates they
are "fast".
5. Update ARM target hooks to use unaligned load / stores. e.g. vld1.8 / vst1.8.
Also increase the threshold to something reasonable (8 for memset, 4 pairs
for memcpy).
This significantly improves Dhrystone, up to 50% on ARM iOS devices.
rdar://12760078
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169791 91177308-0d34-0410-b5e6-96231b3b80d8
the VSRI instruction before it since it does not affect the MSB.
Thanks Craig Topper for suggesting this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169638 91177308-0d34-0410-b5e6-96231b3b80d8
check if loads that happen in between stores alias with the first store in the
chain, only with the second store onwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169516 91177308-0d34-0410-b5e6-96231b3b80d8
This is much simpler to reason about, more efficient, and
fixes some corner cases involving implicit super-register defs.
Fixed rdar://12797931.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169425 91177308-0d34-0410-b5e6-96231b3b80d8
The count attribute is more accurate with regards to the size of an array. It
also obviates the upper bound attribute in the subrange. We can also better
handle an unbound array by setting the count to -1 instead of the lower bound to
1 and upper bound to 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169312 91177308-0d34-0410-b5e6-96231b3b80d8
The count field is necessary because there isn't a difference between the 'lo'
and 'hi' attributes for a one-element array and a zero-element array. When the
count is '0', we know that this is a zero-element array. When it's >=1, then
it's a normal constant sized array. When it's -1, then the array is unbounded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169218 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple, cheap infrastructure for analyzing the shape of a
DAG. It recognizes uniform DAGs that take the shape of bottom-up
subtrees, such as the included matrix multiplication example. This is
useful for heuristics that balance register pressure with ILP. Two
canonical expressions of the heuristic are implemented in scheduling
modes: -misched-ilpmin and -misched-ilpmax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168773 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a hole in the "cheap" alias analysis logic implemented within
the DAG builder itself, regardless of whether proper alias analysis is
enabled. It now handles this pattern produced by LSR+CodeGenPrepare.
%sunkaddr1 = ptrtoint * %obj to i64
%sunkaddr2 = add i64 %sunkaddr1, %lsr.iv
%sunkaddr3 = inttoptr i64 %sunkaddr2 to i32*
store i32 %v, i32* %sunkaddr3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168768 91177308-0d34-0410-b5e6-96231b3b80d8
when the destination register is wider than the memory load.
These load instructions load from m32 or m64 and set the upper bits to zero,
while the folded instructions may accept m128.
rdar://12721174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168710 91177308-0d34-0410-b5e6-96231b3b80d8
This pass was conservative in that it always reserved the FP to enable dynamic
stack realignment, which allowed the RA to use aligned spills for vector
registers. This happens even when spills were not necessary. The RA has
since been improved to use unaligned spills when necessary.
The new behavior is to realign the stack if the frame pointer was already
reserved for some other reason, but don't reserve the frame pointer just
because a function contains vector virtual registers.
Part of rdar://12719844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168627 91177308-0d34-0410-b5e6-96231b3b80d8
The stack realignment code was fixed to work when there is stack realignment and
a dynamic alloca is present so this shouldn't cause correctness issues anymore.
Note that this also enables generation of AVX instructions for memset
under the assumptions:
- Unaligned loads/stores are always fast on CPUs supporting AVX
- AVX is not slower than SSE
We may need some tweaked heuristics if one of those assumptions turns out not to
be true.
Effectively reverts r58317. Part of PR2962.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167967 91177308-0d34-0410-b5e6-96231b3b80d8
temporarily as it is breaking the gdb bots.
This reverts commit r167806/e7ff4c14b157746b3e0228d2dce9f70712d1c126.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167886 91177308-0d34-0410-b5e6-96231b3b80d8
chain is correctly setup.
As an example, if the original load must happen before later stores, we need
to make sure the constructed VZEXT_LOAD is constrained to be before the stores.
rdar://12684358
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167859 91177308-0d34-0410-b5e6-96231b3b80d8
If we have a type 'int a[1]' and a type 'int b[0]', the generated DWARF is the
same for both of them because we use the 'upper_bound' attribute. Instead use
the 'count' attrbute, which gives the correct number of elements in the array.
<rdar://problem/12566646>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167806 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix operand order for atomic sub, where the minuend is the value
loaded from memory and the subtrahend is the parameter specified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167718 91177308-0d34-0410-b5e6-96231b3b80d8
- Add RTM code generation support throught 3 X86 intrinsics:
xbegin()/xend() to start/end a transaction region, and xabort() to abort a
tranaction region
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167573 91177308-0d34-0410-b5e6-96231b3b80d8
misched is disabled by default. With -enable-misched, these heuristics
balance the schedule to simultaneously avoid saturating processor
resources, expose ILP, and minimize register pressure. I've been
analyzing the performance of these heuristics on everything in the
llvm test suite in addition to a few other benchmarks. I would like
each heuristic check to be verified by a unit test, but I'm still
trying to figure out the best way to do that. The heuristics are still
in considerable flux, but as they are refined we should be rigorous
about unit testing the improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167527 91177308-0d34-0410-b5e6-96231b3b80d8
The adc/sbb optimization is to able to convert following expression
into a single adc/sbb instruction:
(ult) ... = x + 1 // where the ult is unsigned-less-than comparison
(ult) ... = x - 1
This change is to flip the "x >u y" (i.e. ugt comparison) in order
to expose the adc/sbb opportunity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167180 91177308-0d34-0410-b5e6-96231b3b80d8
the first source operand is tied to the destination operand.
This is to accurately model the corresponding instructions where the upper
bits are unmodified.
rdar://12558838
PR14221
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167064 91177308-0d34-0410-b5e6-96231b3b80d8
incorrect instruction sequence due to it not being aware that an
inline assembly instruction may reference memory.
This patch fixes the problem by causing the scheduler to always assume that any
inline assembly code instruction could access memory. This is necessary because
the internal representation of the inline instruction does not include
any information about memory accesses.
This should fix PR13504.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166929 91177308-0d34-0410-b5e6-96231b3b80d8
- If more than 1 elemennts are defined and target supports the vectorized
conversion, use the vectorized one instead to reduce the strength on
conversion operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166546 91177308-0d34-0410-b5e6-96231b3b80d8
- As there's no 64-bit GPRs in 32-bit mode, a custom conversion from v2u32 to
v2f32 is added to improve the efficiency of the code generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166545 91177308-0d34-0410-b5e6-96231b3b80d8
the difference from "int x" (which should go in registers and
"struct y {int x;}" (which should not).
Clang will be updated in the next patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166536 91177308-0d34-0410-b5e6-96231b3b80d8
- Check index being extracted to be constant 0 before simplfiying.
Otherwise, retain the original sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166504 91177308-0d34-0410-b5e6-96231b3b80d8
- If INSERT_VECTOR_ELT is supported (above SSE2, either by custom
sequence of legal insn), transform BUILD_VECTOR into SHUFFLE +
INSERT_VECTOR_ELT if most of elements could be built from SHUFFLE with few
(so far 1) elements being inserted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166288 91177308-0d34-0410-b5e6-96231b3b80d8
When merging stack slots, if StackColoring::remapInstructions gets a
value back from GetUnderlyingObject that it does not know about or is
not itself a stack slot, clear the memory operand in case it aliases
the merged slot. This prevents the introduction of incorrect aliasing
information.
Author: Matthew Curtis <mcurtis@codeaurora.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166216 91177308-0d34-0410-b5e6-96231b3b80d8
- Folding (trunc (concat ... X )) to (concat ... (trunc X) ...) is valid
when '...' are all 'undef's.
- r166125 relies on this transformation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166155 91177308-0d34-0410-b5e6-96231b3b80d8
- If the extracted vector has the same type of all vectored being concatenated
together, it should be simplified directly into v_i, where i is the index of
the element being extracted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166125 91177308-0d34-0410-b5e6-96231b3b80d8
- MBB address is only valid as an immediate value in Small & Static
code/relocation models. On other models, LEA is needed to load IP address of
the restore MBB.
- A minor fix of MBB in MC lowering is added as well to enable target
relocation flag being propagated into MC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166084 91177308-0d34-0410-b5e6-96231b3b80d8
PR14098 contains an example where we would rematerialize a MOV8ri
immediately after the original instruction:
%vreg7:sub_8bit<def> = MOV8ri 9; GR32_ABCD:%vreg7
%vreg22:sub_8bit<def> = MOV8ri 9; GR32_ABCD:%vreg7
Besides being pointless, it is also wrong since the original instruction
only redefines part of the register, and the value read by the new
instruction is wrong.
The problem was the LiveRangeEdit::allUsesAvailableAt() didn't
special-case OrigIdx == UseIdx and found the wrong SSA value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166068 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
The attached is the fix to radar://11663049. The optimization can be outlined by following rules:
(select (x != c), e, c) -> select (x != c), e, x),
(select (x == c), c, e) -> select (x == c), x, e)
where the <c> is an integer constant.
The reason for this change is that : on x86, conditional-move-from-constant needs two instructions;
however, conditional-move-from-register need only one instruction.
While the LowerSELECT() sounds to be the most convenient place for this optimization, it turns out to be a bad place. The reason is that by replacing the constant <c> with a symbolic value, it obscure some instruction-combining opportunities which would otherwise be very easy to spot. For that reason, I have to postpone the change to last instruction-combining phase.
The change passes the test of "make check-all -C <build-root/test" and "make -C project/test-suite/SingleSource".
Original message since r165661:
My previous change has a bug: I negated the condition code of a CMOV, and go ahead creating a new CMOV using the *ORIGINAL* condition code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166017 91177308-0d34-0410-b5e6-96231b3b80d8
This is a medium term workaround until we have a more robust solution
in the form of a register liveness utility for postRA passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166001 91177308-0d34-0410-b5e6-96231b3b80d8
- Besides used in SjLj exception handling, __builtin_setjmp/__longjmp is also
used as a light-weight replacement of setjmp/longjmp which are used to
implementation continuation, user-level threading, and etc. The support added
in this patch ONLY addresses this usage and is NOT intended to support SjLj
exception handling as zero-cost DWARF exception handling is used by default
in X86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165989 91177308-0d34-0410-b5e6-96231b3b80d8
X86 doesn't have i8 cmovs so isel would emit a branch. Emitting branches at this
level is often not a good idea because it's too late for many optimizations to
kick in. This solution doesn't add any extensions (truncs are free) and tries
to avoid introducing partial register stalls by filtering direct copyfromregs.
I'm seeing a ~10% speedup on reading a random .png file with libpng15 via
graphicsmagick on x86_64/westmere, but YMMV depending on the microarchitecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165868 91177308-0d34-0410-b5e6-96231b3b80d8
Completely update one interval at a time instead of collecting live
range fragments to be updated. This avoids building data structures,
except for a single SmallPtrSet of updated intervals.
Also share code between handleMove() and handleMoveIntoBundle().
Add support for moving dead defs across other live values in the
interval. The MI scheduler can do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165824 91177308-0d34-0410-b5e6-96231b3b80d8
PHIElimination inserts IMPLICIT_DEF instructions to guarantee that all
PHI predecessors have a live-out value. These IMPLICIT_DEF values are
not considered to be real interference when coalescing virtual
registers:
%vreg1 = IMPLICIT_DEF
%vreg2 = MOV32r0
When joining %vreg1 and %vreg2, the IMPLICIT_DEF instruction and its
value number should simply be erased since the %vreg2 value number now
provides a live-out value for the PHI predecesor block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165813 91177308-0d34-0410-b5e6-96231b3b80d8
Not all instructions define a virtual register in their first operand.
Specifically, INLINEASM has a different format.
<rdar://problem/12472811>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165721 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
The attached is the fix to radar://11663049. The optimization can be outlined by following rules:
(select (x != c), e, c) -> select (x != c), e, x),
(select (x == c), c, e) -> select (x == c), x, e)
where the <c> is an integer constant.
The reason for this change is that : on x86, conditional-move-from-constant needs two instructions;
however, conditional-move-from-register need only one instruction.
While the LowerSELECT() sounds to be the most convenient place for this optimization, it turns out to be a bad place. The reason is that by replacing the constant <c> with a symbolic value, it obscure some instruction-combining opportunities which would otherwise be very easy to spot. For that reason, I have to postpone the change to last instruction-combining phase.
The change passes the test of "make check-all -C <build-root/test" and "make -C project/test-suite/SingleSource".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165661 91177308-0d34-0410-b5e6-96231b3b80d8
- Due to the current matching vector elements constraints in
ISD::FP_ROUND, rounding from v2f64 to v4f32 (after legalization from
v2f32) is scalarized. Add a customized v2f32 widening to convert it
into a target-specific X86ISD::VFPROUND to work around this
constraints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165631 91177308-0d34-0410-b5e6-96231b3b80d8
When the CFG contains a loop with multiple entry blocks, the traces
computed by MachineTraceMetrics don't always have the same nice
properties. Loop back-edges are normally excluded from traces, but
MachineLoopInfo doesn't recognize loops with multiple entry blocks, so
those back-edges may be included.
Avoid asserting when that happens by adding an isEarlierInSameTrace()
function that accurately determines if a dominating block is part of the
same trace AND is above the currrent block in the trace.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165434 91177308-0d34-0410-b5e6-96231b3b80d8
in the Intel syntax.
The MC layer supports emitting in the Intel syntax, but this would require the
inline assembly MachineInstr to be lowered to an MCInst before emission. This
is potential future work, but for now emitting directly from the MachineInstr
suffices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165173 91177308-0d34-0410-b5e6-96231b3b80d8
multiple stores with a single load. We create the wide loads and stores (and their chains)
before we remove the scalar loads and stores and fix the DAG chain. We attempted to merge
loads with a different chain. When that happened, the assumption that it is safe to RAUW
broke and a cycle was introduced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165148 91177308-0d34-0410-b5e6-96231b3b80d8
is not profitable in many cases because modern processors perform multiple stores
in parallel and merging stores prior to merging requires extra work. We handle two main cases:
1. Store of multiple consecutive constants:
q->a = 3;
q->4 = 5;
In this case we store a single legal wide integer.
2. Store of multiple consecutive loads:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
In this case we load/store either ilegal vector registers or legal wide integer registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165125 91177308-0d34-0410-b5e6-96231b3b80d8
Enable the pass by default for targets that request it, and change the
-enable-early-ifcvt to the opposite -disable-early-ifcvt.
There are still some x86 regressions when enabling early if-conversion
because of the missing machine models. Disable the pass for x86 until
machine models are added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165075 91177308-0d34-0410-b5e6-96231b3b80d8
X86DAGToDAGISel::PreprocessISelDAG(), isel is moving load inside
callseq_start / callseq_end so it can be folded into a call. This can
create a cycle in the DAG when the call is glued to a copytoreg. We
have been lucky this hasn't caused too many issues because the pre-ra
scheduler has special handling of call sequences. However, it has
caused a crash in a specific tailcall case.
rdar://12393897
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165072 91177308-0d34-0410-b5e6-96231b3b80d8
the add/sub case since in the case of multiplication you also have to check that
the operation in the larger type did not overflow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165017 91177308-0d34-0410-b5e6-96231b3b80d8
- Update maximal stack alignment when stack arguments are prepared before a
call.
- Test cases are enhanced to show it's not a Win32 specific issue but a generic
one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164946 91177308-0d34-0410-b5e6-96231b3b80d8
because moden processos can store multiple values in parallel, and preparing the consecutive store requires
some work. We only handle these cases:
1. Consecutive stores where the values and consecutive loads. For example:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
2. Consecutive stores where the values are constants. Foe example:
q->a = 4;
q->b = 5;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164910 91177308-0d34-0410-b5e6-96231b3b80d8
buildbots. Original commit message:
A DAGCombine optimization for merging consecutive stores. This optimization is not profitable in many cases
because moden processos can store multiple values in parallel, and preparing the consecutive store requires
some work. We only handle these cases:
1. Consecutive stores where the values and consecutive loads. For example:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
2. Consecutive stores where the values are constants. Foe example:
q->a = 4;
q->b = 5;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164890 91177308-0d34-0410-b5e6-96231b3b80d8
because moden processos can store multiple values in parallel, and preparing the consecutive store requires
some work. We only handle these cases:
1. Consecutive stores where the values and consecutive loads. For example:
int a = p->a;
int b = p->b;
q->a = a;
q->b = b;
2. Consecutive stores where the values are constants. Foe example:
q->a = 4;
q->b = 5;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164885 91177308-0d34-0410-b5e6-96231b3b80d8
Even out-of-line jump tables can be in the code section, so mark them
as data-regions for those targets which support the directives.
rdar://12362871&12362974
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164571 91177308-0d34-0410-b5e6-96231b3b80d8
- Rewrite/merge pseudo-atomic instruction emitters to address the
following issue:
* Reduce one unnecessary load in spin-loop
previously the spin-loop looks like
thisMBB:
newMBB:
ld t1 = [bitinstr.addr]
op t2 = t1, [bitinstr.val]
not t3 = t2 (if Invert)
mov EAX = t1
lcs dest = [bitinstr.addr], t3 [EAX is implicit]
bz newMBB
fallthrough -->nextMBB
the 'ld' at the beginning of newMBB should be lift out of the loop
as lcs (or CMPXCHG on x86) will load the current memory value into
EAX. This loop is refined as:
thisMBB:
EAX = LOAD [MI.addr]
mainMBB:
t1 = OP [MI.val], EAX
LCMPXCHG [MI.addr], t1, [EAX is implicitly used & defined]
JNE mainMBB
sinkMBB:
* Remove immopc as, so far, all pseudo-atomic instructions has
all-register form only, there is no immedidate operand.
* Remove unnecessary attributes/modifiers in pseudo-atomic instruction
td
* Fix issues in PR13458
- Add comprehensive tests on atomic ops on various data types.
NOTE: Some of them are turned off due to missing functionality.
- Revise tests due to the new spin-loop generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164281 91177308-0d34-0410-b5e6-96231b3b80d8
- Merge the processing of LOAD_ADD with other atomic load-arith
operations
- Separate the logic getting target constant for atomic-load-op and add
an optimization for atomic-load-add on i16 with negative value
- Optimize a minor case for atomic-fetch-add i16 with negative operand. Test
case is revised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164243 91177308-0d34-0410-b5e6-96231b3b80d8
It had patterns for zext-loading and extending. This commit adds patterns for loading a wide type, performing a bitcast,
and extending. This is an odd pattern, but it is commonly used when writing code with intrinsics.
rdar://11897677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163995 91177308-0d34-0410-b5e6-96231b3b80d8
- Enhance the fix to PR12312 to support wider integer, such as 256-bit
integer. If more than 1 fully evaluated vectors are found, POR them
first followed by the final PTEST.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163832 91177308-0d34-0410-b5e6-96231b3b80d8
- Find a legal vector type before casting and extracting element from it.
- As the new vector type may have more than 2 elements, build the final
hi/lo pair by BFS pairing them from bottom to top.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163830 91177308-0d34-0410-b5e6-96231b3b80d8
Add a PatFrag to match X86tcret using 6 fixed registers or less. This
avoids folding loads into TCRETURNmi64 using 7 or more volatile
registers.
<rdar://problem/12282281>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163819 91177308-0d34-0410-b5e6-96231b3b80d8
by xoring the high-bit. This fails if the source operand is a vector because we need to negate
each of the elements in the vector.
Fix rdar://12281066 PR13813.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163802 91177308-0d34-0410-b5e6-96231b3b80d8
are within the lifetime zone. Sometime legitimate usages of allocas are
hoisted outside of the lifetime zone. For example, GEPS may calculate the
address of a member of an allocated struct. This commit makes sure that
we only check (abort regions or assert) for instructions that read and write
memory using stack frames directly. Notice that by allowing legitimate
usages outside the lifetime zone we also stop checking for instructions
which use derivatives of allocas. We will catch less bugs in user code
and in the compiler itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163791 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have enough GR64_TC registers when calling a varargs function
with 6 arguments. Since %al holds the number of vector registers used,
only %r11 is available as a scratch register.
This means that addressing modes using both base and index registers
can't be folded into TCRETURNmi64.
<rdar://problem/12282281>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163761 91177308-0d34-0410-b5e6-96231b3b80d8
- BlockAddress has no support of BA + offset form and there is no way to
propagate that offset into machine operand;
- Add BA + offset support and a new interface 'getTargetBlockAddress' to
simplify target block address forming;
- All targets are modified to use new interface and X86 backend is enhanced to
support BA + offset addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163743 91177308-0d34-0410-b5e6-96231b3b80d8
The input program may contain intructions which are not inside lifetime
markers. This can happen due to a bug in the compiler or due to a bug in
user code (for example, returning a reference to a local variable).
This commit adds checks that all of the instructions in the function and
invalidates lifetime ranges which do not contain all of the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163678 91177308-0d34-0410-b5e6-96231b3b80d8
- If a boolean value is generated from CMOV and tested as boolean value,
simplify the use of test result by referencing the original condition.
RDRAND intrinisc is one of such cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163516 91177308-0d34-0410-b5e6-96231b3b80d8
The RegisterCoalescer understands overlapping live ranges where one
register is defined as a copy of the other. With this change, register
allocators using LiveRegMatrix can do the same, at least for copies
between physical and virtual registers.
When a physreg is defined by a copy from a virtreg, allow those live
ranges to overlap:
%CL<def> = COPY %vreg11:sub_8bit; GR32_ABCD:%vreg11
%vreg13<def,tied1> = SAR32rCL %vreg13<tied0>, %CL<imp-use,kill>
We can assign %vreg11 to %ECX, overlapping the live range of %CL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163336 91177308-0d34-0410-b5e6-96231b3b80d8
- CodeGenPrepare pass for identifying div/rem ops
- Backend specifies the type mapping using addBypassSlowDivType
- Enabled only for Intel Atom with O2 32-bit -> 8-bit
- Replace IDIV with instructions which test its value and use DIVB if the value
is positive and less than 256.
- In the case when the quotient and remainder of a divide are used a DIV
and a REM instruction will be present in the IR. In the non-Atom case
they are both lowered to IDIVs and CSE removes the redundant IDIV instruction,
using the quotient and remainder from the first IDIV. However,
due to this optimization CSE is not able to eliminate redundant
IDIV instructions because they are located in different basic blocks.
This is overcome by calculating both the quotient (DIV) and remainder (REM)
in each basic block that is inserted by the optimization and reusing the result
values when a subsequent DIV or REM instruction uses the same operands.
- Test cases check for the presents of the optimization when calculating
either the quotient, remainder, or both.
Patch by Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163150 91177308-0d34-0410-b5e6-96231b3b80d8
output chain is correctly setup.
As an example, if the original load must happen before later stores, we need
to make sure the constructed VZEXT_LOAD is constrained to be before the stores.
rdar://11457792
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163036 91177308-0d34-0410-b5e6-96231b3b80d8
- In addition to undefined, if V2 is zero vector, skip 2nd PSHUFB and POR as
well as PSHUFB will zero elements with negative indices.
Patch by Sriram Murali <sriram.murali@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163018 91177308-0d34-0410-b5e6-96231b3b80d8
I was too optimistic, inline asm can have tied operands that don't
follow the def order.
Fixes PR13742.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162998 91177308-0d34-0410-b5e6-96231b3b80d8
- Add 'UseSSEx' to force SSE legacy insn not being selected when AVX is
enabled.
As the penalty of inter-mixing SSE and AVX instructions, we need
prevent SSE legacy insn from being generated except explicitly
specified through some intrinsics. For patterns supported by both
SSE and AVX, so far, we force AVX insn will be tried first relying on
AddedComplexity or position in td file. It's error-prone and
introduces bugs accidentally.
'UseSSEx' is disabled when AVX is turned on. For SSE insns inherited
by AVX, we need this predicate to force VEX encoding or SSE legacy
encoding only.
For insns not inherited by AVX, we still use the previous predicates,
i.e. 'HasSSEx'. So far, these insns fall into the following
categories:
* SSE insns with MMX operands
* SSE insns with GPR/MEM operands only (xFENCE, PREFETCH, CLFLUSH,
CRC, and etc.)
* SSE4A insns.
* MMX insns.
* x87 insns added by SSE.
2 test cases are modified:
- test/CodeGen/X86/fast-isel-x86-64.ll
AVX code generation is different from SSE one. 'vcvtsi2sdq' cannot be
selected by fast-isel due to complicated pattern and fast-isel
fallback to materialize it from constant pool.
- test/CodeGen/X86/widen_load-1.ll
AVX code generation is different from SSE one after fixing SSE/AVX
inter-mixing. Exec-domain fixing prefers 'vmovapd' instead of
'vmovaps'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162919 91177308-0d34-0410-b5e6-96231b3b80d8
- The root cause is that target constant materialization in X86 fast-isel
creates a PC-rel addressing which may overflow 32-bit range in non-Small code
model if .rodata section is allocated too far away from code segment in
MCJIT, which uses Large code model so far.
- Follow the similar logic to fix non-Small code model in fast-isel by skipping
non-Small code model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162881 91177308-0d34-0410-b5e6-96231b3b80d8
it here, then a 'register-memory' version would wrongly get the commutative
flag.
<rdar://problem/12180135>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162741 91177308-0d34-0410-b5e6-96231b3b80d8
- Add a target-specific DAG optimization to recognize a pattern PTEST-able.
Such a pattern is a OR'd tree with X86ISD::OR as the root node. When
X86ISD::OR node has only its flag result being used as a boolean value and
all its leaves are extracted from the same vector, it could be folded into an
X86ISD::PTEST node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162735 91177308-0d34-0410-b5e6-96231b3b80d8
corresponding changes to existing tests for darwin triple to ensure that
same pattern is tested for bdver2 target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162655 91177308-0d34-0410-b5e6-96231b3b80d8
this allows for better code generation.
Added a new DAGCombine transformation to convert FMAX and FMIN to FMANC and
FMINC, which are commutative.
For example:
movaps %xmm0, %xmm1
movsd LC(%rip), %xmm0
minsd %xmm1, %xmm0
becomes:
minsd LC(%rip), %xmm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162187 91177308-0d34-0410-b5e6-96231b3b80d8
arithmetic instructions. However, when small data types are used, a truncate
node appears between the SETCC node and the arithmetic operation. This patch
adds support for this pattern.
Before:
xorl %esi, %edi
testb %dil, %dil
setne %al
ret
After:
xorb %dil, %sil
setne %al
ret
rdar://12081007
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162160 91177308-0d34-0410-b5e6-96231b3b80d8
I really need to find a way to automate this, but I can't come up with a regex
that has no false positives while handling tricky cases like custom check
prefixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162097 91177308-0d34-0410-b5e6-96231b3b80d8
around. That's not how we do things. Besides, the commit message tells us that
it is covered by the GCC test suite.
------------------------------------------------------------------------
r127497 | zwarich | 2011-03-11 13:51:56 -0800 (Fri, 11 Mar 2011) | 3 lines
Fix the GCC test suite issue exposed by r127477, which was caused by stack
protector insertion not working correctly with unreachable code. Since that
revision was rolled out, this test doesn't actual fail before this fix.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161985 91177308-0d34-0410-b5e6-96231b3b80d8
- FP_EXTEND only support extending from vectors with matching elements.
This results in the scalarization of extending to v2f64 from v2f32,
which will be legalized to v4f32 not matching with v2f64.
- add X86-specific VFPEXT supproting extending from v4f32 to v2f64.
- add BUILD_VECTOR lowering helper to recover back the original
extending from v4f32 to v2f64.
- test case is enhanced to include different vector width.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161894 91177308-0d34-0410-b5e6-96231b3b80d8
and allow some optimizations to turn conditional branches into unconditional.
This commit adds a simple control-flow optimization which merges two consecutive
basic blocks which are connected by a single edge. This allows the codegen to
operate on larger basic blocks.
rdar://11973998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161852 91177308-0d34-0410-b5e6-96231b3b80d8
It is still possible to if-convert if the tail block has extra
predecessors, but the tail phis must be rewritten instead of being
removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161781 91177308-0d34-0410-b5e6-96231b3b80d8
OpTbl1 to OpTbl2 since they have 3 operands and the last operand can be changed
to a memory operand.
PR13576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161769 91177308-0d34-0410-b5e6-96231b3b80d8
- FCMOV only supports a subset of X86 conditions. Skip boolean
simplification if X86 condition is not valid for FCMOV.
- add a minimal test case for PR13577.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161732 91177308-0d34-0410-b5e6-96231b3b80d8
FeatureFastUAMem for Nehalem, Westmere and Sandy Bridge.
FeatureFastUAMem is already on if we pass in nehalem or westmere as a command
argument.
rdar: 7252306
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161717 91177308-0d34-0410-b5e6-96231b3b80d8
- if a boolean test (X86ISD::CMP or X86ISD:SUB) checks a boolean value
generated from X86ISD::SETCC, try to simplify the boolean value
generation and checking by reusing the original EFLAGS with proper
condition code
- add hooks to X86 specific SETCC/BRCOND/CMOV, the major 3 places
consuming EFLAGS
part of patches fixing PR12312
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161687 91177308-0d34-0410-b5e6-96231b3b80d8
When replacing Old with New, it can happen that New is already a
successor. Add the old and new edge weights instead of creating a
duplicate edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161653 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it possible to speed up def_iterator by stopping at the first
use. This makes def_empty() and getUniqueVRegDef() much faster when
there are many uses.
In a +Asserts build, LiveVariables is 100x faster in one case because
getVRegDef() has an assertion that would scan to the end of a
def_iterator chain.
Spill weight calculation is significantly faster (300x in one case)
because isTriviallyReMaterializable() calls MRI->isConstantPhysReg(%RIP)
which calls def_empty(%RIP).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161634 91177308-0d34-0410-b5e6-96231b3b80d8
Use a more conventional doubly linked list where the Prev pointers form
a cycle. This means it is no longer necessary to adjust the Prev
pointers when reallocating the VRegInfo array.
The test changes are required because the register allocation hint is
using the use-list order to break ties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161633 91177308-0d34-0410-b5e6-96231b3b80d8
We perform the following:
1> Use SUB instead of CMP for i8,i16,i32 and i64 in ISel lowering.
2> Modify MachineCSE to correctly handle implicit defs.
3> Convert SUB back to CMP if possible at peephole.
Removed pattern matching of (a>b) ? (a-b):0 and like, since they are handled
by peephole now.
rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161462 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MBP essentially aligned every branch target it could. This
bloats code quite a bit, especially non-looping code which has no real
reason to prefer aligned branch targets so heavily.
As Andy said in review, it's still a bit odd to do this without a real
cost model, but this at least has much more plausible heuristics.
Fixes PR13265.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161409 91177308-0d34-0410-b5e6-96231b3b80d8
If the result of a common subexpression is used at all uses of the candidate
expression, CSE should not increase the live range of the common subexpression.
rdar://11393714 and rdar://11819721
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161396 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is mostly just refactoring a bunch of copy-and-pasted code, but
it also adds a check that the call instructions are readnone or readonly.
That check was already present for sin, cos, sqrt, log2, and exp2 calls, but
it was missing for the rest of the builtins being handled in this code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161282 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed that SelectionDAGBuilder::visitCall was missing a check for memcmp
in TargetLibraryInfo, so that it would use custom code for memcmp calls even
with -fno-builtin. I also had to add a new -disable-simplify-libcalls option
to llc so that I could write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161262 91177308-0d34-0410-b5e6-96231b3b80d8
Fast isel doesn't currently have support for translating builtin function
calls to target instructions. For embedded environments where the library
functions are not available, this is a matter of correctness and not
just optimization. Most of this patch is just arranging to make the
TargetLibraryInfo available in fast isel. <rdar://problem/12008746>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161232 91177308-0d34-0410-b5e6-96231b3b80d8
Add more comments and use early returns to reduce nesting in isLoadFoldable.
Also disable folding for V_SET0 to avoid introducing a const pool entry and
a const pool load.
rdar://10554090 and rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161207 91177308-0d34-0410-b5e6-96231b3b80d8
- Relax to match even if epilogue (pop %ebp) were emitted.
- Assume the return value is stored to %xmm0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161155 91177308-0d34-0410-b5e6-96231b3b80d8
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
This patch is a rework of r160919 and was tested on clang self-host on my local
machine.
rdar://10554090 and rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161152 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, we were using EBX, but PIC requires the GOT to be in EBX before
function calls via PLT GOT pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161066 91177308-0d34-0410-b5e6-96231b3b80d8
One motivating example is to sink an instruction from a basic block which has
two successors: one outside the loop, the other inside the loop. We should try
to sink the instruction outside the loop.
rdar://11980766
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161062 91177308-0d34-0410-b5e6-96231b3b80d8
We branch to the successor with higher edge weight first.
Convert from
je LBB4_8 --> to outer loop
jmp LBB4_14 --> to inner loop
to
jne LBB4_14
jmp LBB4_8
PR12750
rdar: 11393714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161018 91177308-0d34-0410-b5e6-96231b3b80d8
Machine CSE and other optimizations can remove instructions so folding
is possible at peephole while not possible at ISel.
rdar://10554090 and rdar://11873276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160919 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible that an instruction can use and update EFLAGS.
When checking the safety, we should check the usage of EFLAGS first before
declaring it is safe to optimize due to the update.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160912 91177308-0d34-0410-b5e6-96231b3b80d8
These idempotent sub-register indices don't do anything --- They simply
map XMM registers to themselves. They no longer affect register classes
either since the SubRegClasses field has been removed from Target.td.
This patch replaces XMM->XMM EXTRACT_SUBREG and INSERT_SUBREG patterns
with COPY_TO_REGCLASS patterns which simply become COPY instructions.
The number of IMPLICIT_DEF instructions before register allocation is
reduced, and that is the cause of the test case changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160816 91177308-0d34-0410-b5e6-96231b3b80d8
TwoAddressInstructionPass.
The generated code for Atom has a different code sequence. This is realted
to commit r160749.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160755 91177308-0d34-0410-b5e6-96231b3b80d8
It is redundant; RegisterCoalescer will do the remat if it can't eliminate
the copy. Collected instruction counts before and after this. A few extra
instructions are generated due to spilling but it is normal to see these kinds
of changes with almost any small codegen change, according to Jakob.
This also fixed rdar://11830760 where xor is expected instead of movi0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160749 91177308-0d34-0410-b5e6-96231b3b80d8
struct s {
double x1;
float x2;
};
__attribute__((regparm(3))) struct s f(int a, int b, int c);
void g(void) {
f(41, 42, 43);
}
We need to be able to represent passing the address of s to f (sret) in a
register (inreg). Turns out that all that is needed is to not mark them as
mutually incompatible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160695 91177308-0d34-0410-b5e6-96231b3b80d8
are targeting an ELF platform. Only fold gs-relative (and fs-relative) loads
if it is actually sensible to do so for the target platform.
This fixes PR13438.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160687 91177308-0d34-0410-b5e6-96231b3b80d8
that do not support it (X86 does not lower select_cc).
PR: 13428
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160619 91177308-0d34-0410-b5e6-96231b3b80d8
LiveRangeEdit::foldAsLoad() can eliminate a register by folding a load
into its only use. Only do that when the load is safe to move, and it
won't extend any live ranges.
This fixes PR13414.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160575 91177308-0d34-0410-b5e6-96231b3b80d8
PHIElimination splits critical edges when it predicts it can resolve
interference and eliminate copies. It doesn't split the edge if the
interference wouldn't be resolved anyway because the phi-use register is
live in the critical edge anyway.
Teach PHIElimination to split loop exiting edges with interference, even
if it wouldn't resolve the interference. This removes the necessary
copies from the loop, which is still an improvement from injecting the
copies into the loop.
The test case demonstrates the improvement. Before:
LBB0_1:
cmpb $0, (%rdx)
leaq 1(%rdx), %rdx
movl %esi, %eax
je LBB0_1
After:
LBB0_1:
cmpb $0, (%rdx)
leaq 1(%rdx), %rdx
je LBB0_1
movl %esi, %eax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160571 91177308-0d34-0410-b5e6-96231b3b80d8
Updated OptimizeCompare in peephole to remove redundant cmp against zero.
We only remove Compare if CF and OF are not used.
rdar://11855129
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160454 91177308-0d34-0410-b5e6-96231b3b80d8
when run on an Intel Atom processor. The failures have arisen due
to changes elsewhere in the trunk over the past 8 weeks or so.
These failures were not detected by the Atom buildbot because the
CPU on the Atom buildbot was not being detected as an Atom CPU.
The fix for this problem is in Host.cpp and X86Subtarget.cpp, but
shall remain commented out until the current set of Atom test failures
are fixed.
Patch by Andy Zhang and Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160451 91177308-0d34-0410-b5e6-96231b3b80d8
When truncating a result of a vector that is split we need
to use the result of the split vector, and not re-split the dead node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160357 91177308-0d34-0410-b5e6-96231b3b80d8
large immediates. Add dag combine logic to recover in case the large
immediates doesn't fit in cmp immediate operand field.
int foo(unsigned long l) {
return (l>> 47) == 1;
}
we produce
%shr.mask = and i64 %l, -140737488355328
%cmp = icmp eq i64 %shr.mask, 140737488355328
%conv = zext i1 %cmp to i32
ret i32 %conv
which codegens to
movq $0xffff800000000000,%rax
andq %rdi,%rax
movq $0x0000800000000000,%rcx
cmpq %rcx,%rax
sete %al
movzbl %al,%eax
ret
TargetLowering::SimplifySetCC would transform
(X & -256) == 256 -> (X >> 8) == 1
if the immediate fails the isLegalICmpImmediate() test. For x86,
that's immediates which are not a signed 32-bit immediate.
Based on a patch by Eli Friedman.
PR10328
rdar://9758774
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160346 91177308-0d34-0410-b5e6-96231b3b80d8
uint32_t hi(uint64_t res)
{
uint_32t hi = res >> 32;
return !hi;
}
llvm IR looks like this:
define i32 @hi(i64 %res) nounwind uwtable ssp {
entry:
%lnot = icmp ult i64 %res, 4294967296
%lnot.ext = zext i1 %lnot to i32
ret i32 %lnot.ext
}
The optimizer has optimize away the right shift and truncate but the resulting
constant is too large to fit in the 32-bit immediate field. The resulting x86
code is worse as a result:
movabsq $4294967296, %rax ## imm = 0x100000000
cmpq %rax, %rdi
sbbl %eax, %eax
andl $1, %eax
This patch teaches the x86 lowering code to handle ult against a large immediate
with trailing zeros. It will issue a right shift and a truncate followed by
a comparison against a shifted immediate.
shrq $32, %rdi
testl %edi, %edi
sete %al
movzbl %al, %eax
It also handles a ugt comparison against a large immediate with trailing bits
set. i.e. X > 0x0ffffffff -> (X >> 32) >= 1
rdar://11866926
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160312 91177308-0d34-0410-b5e6-96231b3b80d8
In the added testcase the constant 55 was behind an AssertZext of type i1, and ComputeDemandedBits
reported that some of the bits were both known to be one and known to be zero.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160305 91177308-0d34-0410-b5e6-96231b3b80d8
1. FileCheck-ize epilogue.ll and allow another asm instruction to restore %rsp.
2. Remove check in widen_arith-3.ll that was hitting instruction in epilogue instead of
vector add.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160274 91177308-0d34-0410-b5e6-96231b3b80d8
undef virtual register. The problem is that ProcessImplicitDefs removes the
definition of the register and marks all uses as undef. If we lose the undef
marker then we get a register which has no def, is not marked as undef. The
live interval analysis does not collect information for these virtual
registers and we crash in later passes.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160260 91177308-0d34-0410-b5e6-96231b3b80d8
It is intended to fix PR11468.
Old prologue and epilogue looked like this:
push %rbp
mov %rsp, %rbp
and $alignment, %rsp
push %r14
push %r15
...
pop %r15
pop %r14
mov %rbp, %rsp
pop %rbp
The problem was to reference the locations of callee-saved registers in exception handling:
locations of callee-saved had to be re-calculated regarding the stack alignment operation. It would
take some effort to implement this in LLVM, as currently MachineLocation can only have the form
"Register + Offset". Funciton prologue and epilogue are now changed to:
push %rbp
mov %rsp, %rbp
push %14
push %15
and $alignment, %rsp
...
lea -$size_of_saved_registers(%rbp), %rsp
pop %r15
pop %r14
pop %rbp
Reviewed by Chad Rosier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160248 91177308-0d34-0410-b5e6-96231b3b80d8
Allow the folding of vbroadcastRR to vbroadcastRM, where the memory operand is a spill slot.
PR12782.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160230 91177308-0d34-0410-b5e6-96231b3b80d8
the input vector, it can be bigger (this is helpful for powerpc where <2 x i16>
is a legal vector type but i16 isn't a legal type, IIRC). However this wasn't
being taken into account by ExpandRes_EXTRACT_VECTOR_ELT, causing PR13220.
Lightly tweaked version of a patch by Michael Liao.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160116 91177308-0d34-0410-b5e6-96231b3b80d8
X86. Basically, this is a reapplication of r158087 with a few fixes.
Specifically, (1) the stack pointer is restored from the base pointer before
popping callee-saved registers and (2) in obscure cases (see comments in patch)
we must cache the value of the original stack adjustment in the prologue and
apply it in the epilogue.
rdar://11496434
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160002 91177308-0d34-0410-b5e6-96231b3b80d8
multiple scalars and insert them into a vector. Next, we shuffle the elements
into the correct places, as before.
Also fix a small dagcombine bug in SimplifyBinOpWithSameOpcodeHands, when the
migration of bitcasts happened too late in the SelectionDAG process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159991 91177308-0d34-0410-b5e6-96231b3b80d8
getCondFromSETOpc, getCondFromCMovOpc, getSETFromCond, getCMovFromCond
No functional change intended.
If we want to update the condition code of CMOV|SET|Jcc, we first analyze the
opcode to get the condition code, then update the condition code, finally
synthesize the new opcode form the new condition code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159955 91177308-0d34-0410-b5e6-96231b3b80d8
It is safe if EFLAGS is killed or re-defined.
When we are done with the basic block, check whether EFLAGS is live-out.
Do not optimize away cmp if EFLAGS is live-out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159888 91177308-0d34-0410-b5e6-96231b3b80d8
For each Cmp, we check whether there is an earlier Sub which make Cmp
redundant. We handle the case where SUB operates on the same source operands as
Cmp, including the case where the two source operands are swapped.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159838 91177308-0d34-0410-b5e6-96231b3b80d8
The CopyToReg nodes that set up the argument registers before a call
must be glued to the call instruction. Otherwise, the scheduler may emit
the physreg copies long before the call, causing long live ranges for
the fixed registers.
Besides disabling good register allocation, that can also expose
problems when EmitInstrWithCustomInserter() splits a basic block during
the live range of a physreg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159721 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the TII hooks needed by EarlyIfConversion to create cmov
instructions and estimate their latency.
Early if-conversion is still not enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159695 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch in pic 32 bit code we would add the global base register
and not load from that address. This is a really old bug, but before the
introduction of the tls attributes we would never select initial exec for
pic code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159409 91177308-0d34-0410-b5e6-96231b3b80d8
Corrected type for index of llvm.x86.avx2.gather.d.pd.256
from 256-bit to 128-bit.
Corrected types for src|dst|mask of llvm.x86.avx2.gather.q.ps.256
from 256-bit to 128-bit.
Support the following intrinsics:
llvm.x86.avx2.gather.d.q, llvm.x86.avx2.gather.q.q
llvm.x86.avx2.gather.d.q.256, llvm.x86.avx2.gather.q.q.256
llvm.x86.avx2.gather.d.d, llvm.x86.avx2.gather.q.d
llvm.x86.avx2.gather.d.d.256, llvm.x86.avx2.gather.q.d.256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159402 91177308-0d34-0410-b5e6-96231b3b80d8
The primary advantage is that loop optimizations will be applied in a
stable order. This helps debugging and unit test creation. It is also
a better overall implementation without pathologically bad performance
on deep functions.
On large functions (llvm-stress --size=200000 | opt -loops)
Before: 0.1263s
After: 0.0225s
On deep functions (after tweaking llvm-stress, thanks Nadav):
Before: 0.2281s
After: 0.0227s
See r158790 for more comments.
The loop tree is now consistently generated in forward order, but loop
passes are applied in reverse order over the program. If we have a
loop optimization that prefers forward order, that can easily be
achieved by adding a different type of LoopPassManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159183 91177308-0d34-0410-b5e6-96231b3b80d8
Implicitly defined virtual registers can simply have the <undef> bit set
on all uses, and copies can be turned into implicit defs recursively.
Physical registers are a bit trickier. We handle the common case where a
physreg def is used by a nearby instruction in the same basic block. For
more complicated cases, just leave the IMPLICIT_DEF instruction in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159149 91177308-0d34-0410-b5e6-96231b3b80d8
The function live-out registers must be live at all function returns,
and %RCX is only used by eh.return. When a function also has a normal
return, only %RAX holds a return value.
This fixes PR13188.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159116 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the user/front-end to specify a model that is better
than what LLVM would choose by default. For example, a variable
might be declared as
@x = thread_local(initialexec) global i32 42
if it will not be used in a shared library that is dlopen'ed.
If the specified model isn't supported by the target, or if LLVM can
make a better choice, a different model may be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159077 91177308-0d34-0410-b5e6-96231b3b80d8
The code in X86TargetLowering::LowerEH_RETURN() assumes that a frame
pointer exists, but the frame pointer was forced by the presence of
llvm.eh.unwind.init which isn't guaranteed.
If llvm.eh.unwind.init is actually required in functions calling
eh.return (is it?), we should diagnose that instead of emitting bad
machine code.
This should fix the dragonegg-x86_64-linux-gcc-4.6-test bot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158961 91177308-0d34-0410-b5e6-96231b3b80d8
Regunit live ranges are computed on demand, so when mi-sched calls
handleMove, some regunits may not have live ranges yet.
That makes updating them easier: Just skip the non-existing ranges. They
will be computed correctly from the rescheduled machine code when they
are needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158831 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLoweringObjectFileELF. Use this to support it on X86. Unlike ARM,
on X86 it is not easy to find out if .init_array should be used or not, so
the decision is made via TargetOptions and defaults to off.
Add a command line option to llc that enables it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158692 91177308-0d34-0410-b5e6-96231b3b80d8
temporarily reverted.
This test is annoyingly overspecified, but I don't know of another way
to thoroughly test the saving and restoring of the registers. While this
will have to be adjusted even with the issue fixed in order to re-apply
r158087, those adjustments should very clearly indicate that it is still
correct (%esp getting restored prior to pops), whereas without it, this
case can easily slip under the radar.
Still, any suggestions for improvements are very welcome.
All credit to Matt Beaumont-Gay for reducing this out of an insane
Address Sanitizer crash to a reasonably small seg-faulting C program
when built with -mstackrealign. I just reduced it to IR, which was much
simpler. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158656 91177308-0d34-0410-b5e6-96231b3b80d8
This patch causes problems when both dynamic stack realignment and
dynamic allocas combine in the same function. With this patch, we no
longer build the epilog correctly, and silently restore registers from
the wrong position in the stack.
Thanks to Matt for tracking this down, and getting at least an initial
test case to Chad. I'm going to try to check a variation of that test
case in so we can easily track the fixes required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158654 91177308-0d34-0410-b5e6-96231b3b80d8
The fast register allocator is not supposed to work in the optimizing
pipeline. It doesn't make sense to compute live intervals, run full copy
coalescing, and then run RAFast.
Fast register allocation in the optimizing pipeline is better done by
RABasic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158242 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will generate the following for integer ABS:
movl %edi, %eax
negl %eax
cmovll %edi, %eax
INSTEAD OF
movl %edi, %ecx
sarl $31, %ecx
leal (%rdi,%rcx), %eax
xorl %ecx, %eax
There exists a target-independent DAG combine for integer ABS, which converts
integer ABS to sar+add+xor. For X86, we match this pattern back to neg+cmov.
This is implemented in PerformXorCombine.
rdar://10695237
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158175 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize the following
movq %rdi, %rax
subq %rsi, %rax
cmovsq %rsi, %rdi
movq %rdi, %rax
to
cmpq %rsi, %rdi
cmovsq %rsi, %rdi
movq %rdi, %rax
Perform this optimization if the actual result of SUB is not used.
rdar: 11540023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158126 91177308-0d34-0410-b5e6-96231b3b80d8
The commit is intended to fix rdar://11540023.
It is implemented as part of peephole optimization. We can actually implement
this in the SelectionDAG lowering phase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158122 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize the following:
sub r1, r3
cmp r3, r1 or cmp r1, r3
bge L1
TO
sub r1, r3
bge L1 or ble L1
If the branch instruction can use flag from "sub", then we can eliminate
the "cmp" instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157831 91177308-0d34-0410-b5e6-96231b3b80d8
This implements codegen support for accesses to thread-local variables
using the local-dynamic model, and adds a clean-up pass so that the base
address for the TLS block can be re-used between local-dynamic access on
an execution path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157818 91177308-0d34-0410-b5e6-96231b3b80d8
types, as well as int<->ptr casts. This allows us to tailcall functions
with some trivial casts between the call and return (i.e. because the
return types disagree).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157798 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize the following
movq %rdi, %rax
subq %rsi, %rax
cmovsq %rsi, %rdi
movq %rdi, %rax
to
cmpq %rsi, %rdi
cmovsq %rsi, %rdi
movq %rdi, %rax
Perform this optimization if the actual result of SUB is not used.
rdar: 11540023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157755 91177308-0d34-0410-b5e6-96231b3b80d8
I disabled FMA3 autodetection, since the result may differ from expected for some benchmarks.
I added tests for GodeGen and intrinsics.
I did not change llvm.fma.f32/64 - it may be done later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157737 91177308-0d34-0410-b5e6-96231b3b80d8
It helps compile exotic inline asm. In the test case, normal GR32
virtual registers use up eax-edx so the final GR32_ABCD live range has
no registers left. Since all the live ranges were tiny, we had no way of
prioritizing the smaller register class.
This patch allows tiny unspillable live ranges to be evicted by tiny
unspillable live ranges from a smaller register class.
<rdar://problem/11542429>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157715 91177308-0d34-0410-b5e6-96231b3b80d8
integer registers. This is already supported by the fastcc convention, but it doesn't
hurt to support it in the standard conventions as well.
In cases where we can cheat at the calling convention, this allows us to avoid returning
things through memory in more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157698 91177308-0d34-0410-b5e6-96231b3b80d8
This required light surgery on the assembler and disassembler
because the instructions use an uncommon encoding. They are
the only two instructions in x86 that use register operands
and two immediates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157634 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyCFG tends to form a lot of 2-3 case switches when merging branches. Move
the most likely condition to the front so it is checked first and the others can
be skipped. This is currently not as effective as it could be because SimplifyCFG
destroys profiling metadata when merging branches and switches. Merging branch
weight metadata is tricky though.
This code touches at most 3 cases so I didn't use a proper sorting algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157521 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the coalescer keeps live intervals and machine code in sync at
all times, it needs to deal with identity copies differently.
When merging two virtual registers, all identity copies are removed
right away. This means that other identity copies must come from
somewhere else, and they are going to have a value number.
Deal with such copies by merging the value numbers before erasing the
copy instruction. Otherwise, we leave dangling value numbers in the live
interval.
This fixes PR12927.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157340 91177308-0d34-0410-b5e6-96231b3b80d8
Also make sure registers aren't erased twice if the dead def mentions
the register twice.
This fixes PR12911.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157254 91177308-0d34-0410-b5e6-96231b3b80d8
may be RAUW'd by the recursive call to LegalizeOps; instead, retrieve
the other operands when calling UpdateNodeOperands. Fixes PR12889.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157162 91177308-0d34-0410-b5e6-96231b3b80d8
X86 has 2-addr instructions with different constraints on the tied def
and use operands. One is GR32, one is GR32_NOSP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157149 91177308-0d34-0410-b5e6-96231b3b80d8
Dead code elimination during coalescing could cause a virtual register
to be split into connected components. The following rewriting would be
confused about the already joined copies present in the code, but
without a corresponding value number in the live range.
Erase all joined copies instantly when joining intervals such that the
MI and LiveInterval representations are always in sync.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157135 91177308-0d34-0410-b5e6-96231b3b80d8
The late dead code elimination is no longer necessary.
The test changes are cause by a register hint that can be either %rdi or
%rax. The choice depends on the use list order, which this patch changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157131 91177308-0d34-0410-b5e6-96231b3b80d8
non-profitable commute using outdated info. The test case would still fail
because of poor pre-RA schedule. That will be fixed by MI scheduler.
rdar://11472010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157038 91177308-0d34-0410-b5e6-96231b3b80d8
This is the same as the other tests: Clever tricks are required to make
the arguments and return value line up in a single-instruction function.
It rarely happens in real life.
We have plenty other examples of this behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157030 91177308-0d34-0410-b5e6-96231b3b80d8
This option has been disabled for a while, and it is going away so I can
clean up the coalescer code.
The tests that required physreg joining to be enabled were almost all of
the form "tiny function with interference between arguments and return
value". Such functions are usually inlined in the real world.
The problem exposed by phys_subreg_coalesce-3.ll is real, but fairly
rare.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157027 91177308-0d34-0410-b5e6-96231b3b80d8
RAFast must add an <imp-def> operand when it is rewriting a sub-register
def that isn't a read-modify-write.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156777 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a TODO from 2007 :) Previously, LLVM would emit the wrong
code here (see the update to test/CodeGen/X86/tls-pie.ll).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156611 91177308-0d34-0410-b5e6-96231b3b80d8
Starting r155461 we are able to select patterns for vbroadcast even when the load op is used by other users.
Fix PR11900.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156539 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize -(x != 0) on X86
FROM
cmpl $0x01,%edi
sbbl %eax,%eax
notl %eax
TO
negl %edi
sbbl %eax %eax
In order to generate negl, I added patterns in Target/X86/X86InstrCompiler.td:
def : Pat<(X86sub_flag 0, GR32:$src), (NEG32r GR32:$src)>;
rdar: 10961709
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156312 91177308-0d34-0410-b5e6-96231b3b80d8
The primitive conservative heuristic seems to give a slight overall
improvement while not regressing stuff. Make it available to wider
testing. If you notice any speed regressions (or significant code
size regressions) let me know!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156258 91177308-0d34-0410-b5e6-96231b3b80d8
This came up when a change in block placement formed a cmov and slowed down a
hot loop by 50%:
ucomisd (%rdi), %xmm0
cmovbel %edx, %esi
cmov is a really bad choice in this context because it doesn't get branch
prediction. If we emit it as a branch, an out-of-order CPU can do a better job
(if the branch is predicted right) and avoid waiting for the slow load+compare
instruction to finish. Of course it won't help if the branch is unpredictable,
but those are really rare in practice.
This patch uses a dumb conservative heuristic, it turns all cmovs that have one
use and a direct memory operand into branches. cmovs usually save some code
size, so we disable the transform in -Os mode. In-Order architectures are
unlikely to benefit as well, those are included in the
"predictableSelectIsExpensive" flag.
It would be better to reuse branch probability info here, but BPI doesn't
support select instructions currently. It would make sense to use the same
heuristics as the if-converter pass, which does the opposite direction of this
transform.
Test suite shows a small improvement here and there on corei7-level machines,
but the actual results depend a lot on the used microarchitecture. The
transformation is currently disabled by default and available by passing the
-enable-cgp-select2branch flag to the code generator.
Thanks to Chandler for the initial test case to him and Evan Cheng for providing
me with comments and test-suite numbers that were more stable than mine :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156234 91177308-0d34-0410-b5e6-96231b3b80d8
to catch cases like:
%reg1024<def> = MOV r1
%reg1025<def> = MOV r0
%reg1026<def> = ADD %reg1024, %reg1025
r0 = MOV %reg1026
By commuting ADD, it let coalescer eliminate all of the copies. However, there
was a bug in the heuristics where it ended up commuting the ADD in:
%reg1024<def> = MOV r0
%reg1025<def> = MOV 0
%reg1026<def> = ADD %reg1024, %reg1025
r0 = MOV %reg1026
That did no benefit but rather ensure the last MOV would not be coalesced.
rdar://11355268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156048 91177308-0d34-0410-b5e6-96231b3b80d8
This patch will optimize -(x != 0) on X86
FROM
cmpl $0x01,%edi
sbbl %eax,%eax
notl %eax
TO
negl %edi
sbbl %eax %eax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155853 91177308-0d34-0410-b5e6-96231b3b80d8
On x86-32, structure return via sret lets the callee pop the hidden
pointer argument off the stack, which the caller then re-pushes.
However if the calling convention is fastcc, then a register is used
instead, and the caller should not adjust the stack. This is
implemented with a check of IsTailCallConvention
X86TargetLowering::LowerCall but is now checked properly in
X86FastISel::DoSelectCall.
(this time, actually commit what was reviewed!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155825 91177308-0d34-0410-b5e6-96231b3b80d8
This time, also fix the caller of AddGlue to properly handle
incomplete chains. AddGlue had failure modes, but shamefully hid them
from its caller. It's luck ran out.
Fixes rdar://11314175: BuildSchedUnits assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155749 91177308-0d34-0410-b5e6-96231b3b80d8
On x86-32, structure return via sret lets the callee pop the hidden
pointer argument off the stack, which the caller then re-pushes.
However if the calling convention is fastcc, then a register is used
instead, and the caller should not adjust the stack. This is
implemented with a check of IsTailCallConvention
X86TargetLowering::LowerCall but is now checked properly in
X86FastISel::DoSelectCall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155745 91177308-0d34-0410-b5e6-96231b3b80d8
x == -y --> x+y == 0
x != -y --> x+y != 0
On x86, the generated code goes from
negl %esi
cmpl %esi, %edi
je .LBB0_2
to
addl %esi, %edi
je .L4
This case is correctly handled for ARM with "cmn".
Patch by Manman Ren.
rdar://11245199
PR12545
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155739 91177308-0d34-0410-b5e6-96231b3b80d8
* Model FPSW (the FPU status word) as a register.
* Add ISel patterns for the FUCOM*, FNSTSW and SAHF instructions.
* During Legalize/Lowering, build a node sequence to transfer the comparison
result from FPSW into EFLAGS. If you're wondering about the right-shift: That's
an implicit sub-register extraction (%ax -> %ah) which is handled later on by
the instruction selector.
Fixes PR6679. Patch by Christoph Erhardt!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155704 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombine strangeness may result in multiple loads from the same
offset. They both may try to glue themselves to another load. We could
insist that the redundant loads glue themselves to each other, but the
beter fix is to bail out from bad gluing at the time we detect it.
Fixes rdar://11314175: BuildSchedUnits assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155668 91177308-0d34-0410-b5e6-96231b3b80d8
using the pattern (vbroadcast (i32load src)). In some cases, after we generate
this pattern new users are added to the load node, which prevent the selection
of the blend pattern. This commit provides fallback patterns which perform
in-vector broadcast (using in-vector vbroadcast in AVX2 and pshufd on AVX1).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155437 91177308-0d34-0410-b5e6-96231b3b80d8
