We know that the blend instructions only use the MSB, so if the mask is
sign-extended then we can convert it into a SHL instruction. This is a
common pattern because the type-legalizer sign-extends the i1 type which
is used by the LLVM-IR for the condition.
Added a new optimization in SimplifyDemandedBits for SIGN_EXTEND_INREG -> SHL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148225 91177308-0d34-0410-b5e6-96231b3b80d8
The registers are placed into the saved registers list in the reverse order,
which is why the original loop was written to loop backwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148064 91177308-0d34-0410-b5e6-96231b3b80d8
lc: X86ISelLowering.cpp:6480: llvm::SDValue llvm::X86TargetLowering::LowerVECTOR_SHUFFLE(llvm::SDValue, llvm::SelectionDAG&) const: Assertion `V1.getOpcode() != ISD::UNDEF&& "Op 1 of shuffle should not be undef"' failed.
Added a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148044 91177308-0d34-0410-b5e6-96231b3b80d8
Uses the pvArbitrary slot of the TIB, which is reserved for applications. We
only support frames with a static size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148040 91177308-0d34-0410-b5e6-96231b3b80d8
Restore the (obviously wrong) behavior from before r147938 without relying on
undefined behavior. Add a fat FIXME note.
This should fix nightly tester failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148030 91177308-0d34-0410-b5e6-96231b3b80d8
In att style asm syntax memory operand size is derived from suffix attached with mnemonic. In intel style asm syntax it is part of memory operand hence predicate method check is required to select appropriate instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148006 91177308-0d34-0410-b5e6-96231b3b80d8
same pattern. We already had this pattern is a few places, but others
tried to make a rough approximation of an actual DAG structure. As not
everywhere went to this trouble, nothing could rely on this being done.
In fact, I've checked all references to these node Ids, and the ones
that are using the topo-sort properties are actually satisfied with
a strict-weak-ordering. The requirement appears to be that Use >= Def.
I've added a big blurb of comments to this bit of the transform to
clarify why the order is so important for the next reader of the code.
I'm starting with this change as it is very small, and trivially
reverted if something breaks or the >= above really does need to be >.
If that proves the case, we can hide the problem by reverting this
patch, but the problem exists elsewhere as well, and so a more
comprehensive solution will be needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148001 91177308-0d34-0410-b5e6-96231b3b80d8
This uses TLS slot 90, which actually belongs to JavaScriptCore. We only support
frames with static size
Patch by Brian Anderson.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147960 91177308-0d34-0410-b5e6-96231b3b80d8
hoped this would revive one of the llvm-gcc selfhost build bots, but it
didn't so it doesn't appear that my transform is the culprit.
If anyone else is seeing failures, please let me know!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147957 91177308-0d34-0410-b5e6-96231b3b80d8
strange build bot failures that look like a miscompile into an infloop.
I'll investigate this tomorrow, but I'd both like to know whether my
patch is the culprit, and get the bots back to green.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147945 91177308-0d34-0410-b5e6-96231b3b80d8
factor the differences that were hiding in one of them into its other
caller, the SRL handling code. No change in behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147940 91177308-0d34-0410-b5e6-96231b3b80d8
mask+shift pairs at the beginning of the ISD::AND case block, and then
hoist the final pattern into a helper function, simplifying and
reflowing it appropriately. This should have no observable behavior
change, but several simplifications fell out of this such as directly
computing the new mask constant, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147939 91177308-0d34-0410-b5e6-96231b3b80d8
extracts and scaled addressing modes into its own helper function. No
functionality changed here, just hoisting and layout fixes falling out
of that hoisting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147937 91177308-0d34-0410-b5e6-96231b3b80d8
detect a pattern which can be implemented with a small 'shl' embedded in
the addressing mode scale. This happens in real code as follows:
unsigned x = my_accelerator_table[input >> 11];
Here we have some lookup table that we look into using the high bits of
'input'. Each entity in the table is 4-bytes, which means this
implicitly gets turned into (once lowered out of a GEP):
*(unsigned*)((char*)my_accelerator_table + ((input >> 11) << 2));
The shift right followed by a shift left is canonicalized to a smaller
shift right and masking off the low bits. That hides the shift right
which x86 has an addressing mode designed to support. We now detect
masks of this form, and produce the longer shift right followed by the
proper addressing mode. In addition to saving a (rather large)
instruction, this also reduces stalls in Intel chips on benchmarks I've
measured.
In order for all of this to work, one part of the DAG needs to be
canonicalized *still further* than it currently is. This involves
removing pointless 'trunc' nodes between a zextload and a zext. Without
that, we end up generating spurious masks and hiding the pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147936 91177308-0d34-0410-b5e6-96231b3b80d8
Add a test that checks the stack alignment of a simple function for
Darwin, Linux and NetBSD for 32bit and 64bit mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147888 91177308-0d34-0410-b5e6-96231b3b80d8
As the comment around 7746 says, it's better to use the x87 extended precision
here than SSE. And the generic code doesn't know how to do that. It also regains
the speed lost for the uint64_to_float.c testcase.
<rdar://problem/10669858>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147869 91177308-0d34-0410-b5e6-96231b3b80d8
AsmParser holds info specific to target parser.
AsmParserVariant holds info specific to asm variants supported by the target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147787 91177308-0d34-0410-b5e6-96231b3b80d8
this substraction will result in small negative numbers at worst which
become very large positive numbers on assignment and are thus caught by
the <=4 check on the next line. The >0 check clearly intended to catch
these as negative numbers.
Spotted by inspection, and impossible to trigger given the shift widths
that can be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147773 91177308-0d34-0410-b5e6-96231b3b80d8
Testing: passed 'make check' including LIT tests for all sequences being handled (both SSE and AVX)
Reviewers: Evan Cheng, David Blaikie, Bruno Lopes, Elena Demikhovsky, Chad Rosier, Anton Korobeynikov
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147601 91177308-0d34-0410-b5e6-96231b3b80d8
This small bit of ASM code is sufficient to do what the old algorithm did:
movq %rax, %xmm0
punpckldq (c0), %xmm0 // c0: (uint4){ 0x43300000U, 0x45300000U, 0U, 0U }
subpd (c1), %xmm0 // c1: (double2){ 0x1.0p52, 0x1.0p52 * 0x1.0p32 }
#ifdef __SSE3__
haddpd %xmm0, %xmm0
#else
pshufd $0x4e, %xmm0, %xmm1
addpd %xmm1, %xmm0
#endif
It's arguably faster. One caveat, the 'haddpd' instruction isn't very fast on
all processors.
<rdar://problem/7719814>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147593 91177308-0d34-0410-b5e6-96231b3b80d8
(x > y) ? x : y
=>
(x >= y) ? x : y
So for something like
(x - y) > 0 : (x - y) ? 0
It will be
(x - y) >= 0 : (x - y) ? 0
This makes is possible to test sign-bit and eliminate a comparison against
zero. e.g.
subl %esi, %edi
testl %edi, %edi
movl $0, %eax
cmovgl %edi, %eax
=>
xorl %eax, %eax
subl %esi, $edi
cmovsl %eax, %edi
rdar://10633221
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147512 91177308-0d34-0410-b5e6-96231b3b80d8
Matching MOVLP mask for AVX (265-bit vectors) was wrong.
The failure was detected by conformance tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147308 91177308-0d34-0410-b5e6-96231b3b80d8
LZCNT instructions are available. Force promotion to i32 to get
a smaller encoding since the fix-ups necessary are just as complex for
either promoted type
We can't do standard promotion for CTLZ when lowering through BSR
because it results in poor code surrounding the 'xor' at the end of this
instruction. Essentially, if we promote the entire CTLZ node to i32, we
end up doing the xor on a 32-bit CTLZ implementation, and then
subtracting appropriately to get back to an i8 value. Instead, our
custom logic just uses the knowledge of the incoming size to compute
a perfect xor. I'd love to know of a way to fix this, but so far I'm
drawing a blank. I suspect the legalizer could be more clever and/or it
could collude with the DAG combiner, but how... ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147251 91177308-0d34-0410-b5e6-96231b3b80d8
'bsf' instructions here.
This one is actually debatable to my eyes. It's not clear that any chip
implementing 'tzcnt' would have a slow 'bsf' for any reason, and unless
EFLAGS or a zero input matters, 'tzcnt' is just a longer encoding.
Still, this restores the old behavior with 'tzcnt' enabled for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147246 91177308-0d34-0410-b5e6-96231b3b80d8
X86ISelLowering C++ code. Because this is lowered via an xor wrapped
around a bsr, we want the dagcombine which runs after isel lowering to
have a chance to clean things up. In particular, it is very common to
see code which looks like:
(sizeof(x)*8 - 1) ^ __builtin_clz(x)
Which is trying to compute the most significant bit of 'x'. That's
actually the value computed directly by the 'bsr' instruction, but if we
match it too late, we'll get completely redundant xor instructions.
The more naive code for the above (subtracting rather than using an xor)
still isn't handled correctly due to the dagcombine getting confused.
Also, while here fix an issue spotted by inspection: we should have been
expanding the zero-undef variants to the normal variants when there is
an 'lzcnt' instruction. Do so, and test for this. We don't want to
generate unnecessary 'bsr' instructions.
These two changes fix some regressions in encoding and decoding
benchmarks. However, there is still a *lot* to be improve on in this
type of code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147244 91177308-0d34-0410-b5e6-96231b3b80d8
use the zero-undefined variants of CTTZ and CTLZ. These are just simple
patterns for now, there is more to be done to make real world code using
these constructs be optimized and codegen'ed properly on X86.
The existing tests are spiffed up to check that we no longer generate
unnecessary cmov instructions, and that we generate the very important
'xor' to transform bsr which counts the index of the most significant
one bit to the number of leading (most significant) zero bits. Also they
now check that when the variant with defined zero result is used, the
cmov is still produced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146974 91177308-0d34-0410-b5e6-96231b3b80d8
Use information computed while inferring new register classes to emit
accurate, table-driven implementations of getMatchingSuperRegClass().
Delete the old manual, error-prone implementations in the targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146873 91177308-0d34-0410-b5e6-96231b3b80d8
the compact unwind claiming that one register was saved before another, which
isn't all that great in general. Process them in the natural order. Reverse the
list only when necessary for the algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146612 91177308-0d34-0410-b5e6-96231b3b80d8
to finalize MI bundles (i.e. add BUNDLE instruction and computing register def
and use lists of the BUNDLE instruction) and a pass to unpack bundles.
- Teach more of MachineBasic and MachineInstr methods to be bundle aware.
- Switch Thumb2 IT block to MI bundles and delete the hazard recognizer hack to
prevent IT blocks from being broken apart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146542 91177308-0d34-0410-b5e6-96231b3b80d8
undefined result. This adds new ISD nodes for the new semantics,
selecting them when the LLVM intrinsic indicates that the undef behavior
is desired. The new nodes expand trivially to the old nodes, so targets
don't actually need to do anything to support these new nodes besides
indicating that they should be expanded. I've done this for all the
operand types that I could figure out for all the targets. Owners of
various targets, please review and let me know if any of these are
incorrect.
Note that the expand behavior is *conservatively correct*, and exactly
matches LLVM's current behavior with these operations. Ideally this
patch will not change behavior in any way. For example the regtest suite
finds the exact same instruction sequences coming out of the code
generator. That's why there are no new tests here -- all of this is
being exercised by the existing test suite.
Thanks to Duncan Sands for reviewing the various bits of this patch and
helping me get the wrinkles ironed out with expanding for each target.
Also thanks to Chris for clarifying through all the discussions that
this is indeed the approach he was looking for. That said, there are
likely still rough spots. Further review much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146466 91177308-0d34-0410-b5e6-96231b3b80d8
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146436 91177308-0d34-0410-b5e6-96231b3b80d8
does. The _GLOBAL_OFFSET_TABLE_ is still magical in that we get a R_386_GOTPC,
but it doesn't change the immediate in the same way as when the expression
has no right hand side symbol.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146311 91177308-0d34-0410-b5e6-96231b3b80d8
if (HasAVX)
X86SSELevel = NoMMXSSE;
This is so patterns that are predicated on hasSSE3, etc. would not be selected when avx is available. Instead, the AVX variant is selected.
However, this breaks instructions which do not have AVX variants.
The right way to fix this is for the SSE but not-AVX patterns to predicate on something like hasSSE3() && !hasAVX().
Then we can take out the hack in X86Subtarget.cpp. Patterns which do not have AVX variants do not need to change.
However, we need to audit all the patterns before we make the change. This patch is workaround that fixes one specific case,
the prefetch instructions. rdar://10538297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146163 91177308-0d34-0410-b5e6-96231b3b80d8
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146026 91177308-0d34-0410-b5e6-96231b3b80d8
This was actually a bit of a mess. TLI.setPrefLoopAlignment was clearly
documented as taking log2(bytes) units, but the x86 target would still
set a preferred loop alignment of '16'.
CodePlacementOpt passed this number on to the basic block, and
AsmPrinter interpreted it as bytes.
Now both MachineFunction and MachineBasicBlock use logarithmic
alignments.
Obviously, MachineConstantPool still measures alignments in bytes, so we
can emulate the thrill of using as.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145889 91177308-0d34-0410-b5e6-96231b3b80d8
Whether a fixup needs relaxation for the associated instruction is a
target-specific function, as the FIXME indicated. Create a hook for that
and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145881 91177308-0d34-0410-b5e6-96231b3b80d8
libgcc sets the stack limit field in TCB to 256 bytes above the actual
allocated stack limit. This means if the function's stack frame needs
less than 256 bytes, we can just compare the stack pointer with the
stack limit. This should result in lesser calls to __morestack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145766 91177308-0d34-0410-b5e6-96231b3b80d8
Currently LLVM pads the call to __morestack with a add and sub of 8
bytes to esp. This isn't correct since __morestack expects the call
to be followed directly by a ret.
This commit also adjusts the relevant test-case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145765 91177308-0d34-0410-b5e6-96231b3b80d8
the same value) to this variable. This code could be refactored, but it doesn't
matter since the old JIT is going away. Add tsan annotations to ignore the
race.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145745 91177308-0d34-0410-b5e6-96231b3b80d8
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
While at it remove the barcelona/instanbul/shanghai subtargets, they're
unsupported by GCC and look pretty broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145494 91177308-0d34-0410-b5e6-96231b3b80d8
Like V_SET0, these instructions are expanded by ExpandPostRA to xorps /
vxorps so they can participate in execution domain swizzling.
This also makes the AVX variants redundant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145440 91177308-0d34-0410-b5e6-96231b3b80d8
as MC is the only assembler we support.
This splits MS/Windows and GNU/Windows ASM infos into two seperate classes.
While there is currently only one difference, full MS C++ ABI support will
require many more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145409 91177308-0d34-0410-b5e6-96231b3b80d8
tablegen patterns for scalar FMA4 operations and intrinsic. Also
add tests for vfmaddsd.
Patch by Jan Sjodin
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145133 91177308-0d34-0410-b5e6-96231b3b80d8
Before:
movabsq $4294967296, %rax ## encoding: [0x48,0xb8,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00]
testq %rax, %rdi ## encoding: [0x48,0x85,0xf8]
jne LBB0_2 ## encoding: [0x75,A]
After:
btq $32, %rdi ## encoding: [0x48,0x0f,0xba,0xe7,0x20]
jb LBB0_2 ## encoding: [0x72,A]
btq is usually slower than testq because it doesn't fuse with the jump, but here we're better off
saving one register and a giant movabsq.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145103 91177308-0d34-0410-b5e6-96231b3b80d8
VSHUFPS/VSHUFPD instructions while lowering VECTOR_SHUFFLE node. I check a commuted VSHUFP mask.
The patch was reviewed by Bruno.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145099 91177308-0d34-0410-b5e6-96231b3b80d8
This was a bug in keeping track of the available domains when merging
domain values.
The wrong domain mask caused ExecutionDepsFix to try to move VANDPSYrr
to the integer domain which is only available in AVX2.
Also add an assertion to catch future attempts at emitting AVX2
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145096 91177308-0d34-0410-b5e6-96231b3b80d8
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144788 91177308-0d34-0410-b5e6-96231b3b80d8
Two new TargetInstrInfo hooks lets the target tell ExecutionDepsFix
about instructions with partial register updates causing false unwanted
dependencies.
The ExecutionDepsFix pass will break the false dependencies if the
updated register was written in the previoius N instructions.
The small loop added to sse-domains.ll runs twice as fast with
dependency-breaking instructions inserted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144602 91177308-0d34-0410-b5e6-96231b3b80d8
Constant idx case is still done in tablegen but other cases are then expanded
Fixes <rdar://problem/10435460>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144557 91177308-0d34-0410-b5e6-96231b3b80d8
Note: These patterns only works in some cases because
many times the load sd node is bitcasted from a load
node of a different type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144266 91177308-0d34-0410-b5e6-96231b3b80d8
handle defining the "magic" target related components (like native,
nativecodegen, and engine).
- We still require these components to be in the project (currently in
lib/Target) so that we have a place to document them and hopefully make it
more obvious that they are "magic".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144253 91177308-0d34-0410-b5e6-96231b3b80d8
When this field is true it means that the load is from constant (runt-time or compile-time) and so can be hoisted from loops or moved around other memory accesses
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144100 91177308-0d34-0410-b5e6-96231b3b80d8
The xorps instruction is smaller than pxor, so prefer that encoding.
The ExecutionDepsFix pass will switch the encoding to pxor and xorpd
when appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143996 91177308-0d34-0410-b5e6-96231b3b80d8
I'm going to wait for any review comments and perform some additional testing before turning this on by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143750 91177308-0d34-0410-b5e6-96231b3b80d8
On x86: (shl V, 1) -> add V,V
Hardware support for vector-shift is sparse and in many cases we scalarize the
result. Additionally, on sandybridge padd is faster than shl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143311 91177308-0d34-0410-b5e6-96231b3b80d8
fixes: Use a separate register, instead of SP, as the
calling-convention resource, to avoid spurious conflicts with
actual uses of SP. Also, fix unscheduling of calling sequences,
which can be triggered by pseudo-two-address dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143206 91177308-0d34-0410-b5e6-96231b3b80d8
it fixes the dragonegg self-host (it looks like gcc is miscompiled).
Original commit messages:
Eliminate LegalizeOps' LegalizedNodes map and have it just call RAUW
on every node as it legalizes them. This makes it easier to use
hasOneUse() heuristics, since unneeded nodes can be removed from the
DAG earlier.
Make LegalizeOps visit the DAG in an operands-last order. It previously
used operands-first, because LegalizeTypes has to go operands-first, and
LegalizeTypes used to be part of LegalizeOps, but they're now split.
The operands-last order is more natural for several legalization tasks.
For example, it allows lowering code for nodes with floating-point or
vector constants to see those constants directly instead of seeing the
lowered form (often constant-pool loads). This makes some things
somewhat more complicated today, though it ought to allow things to be
simpler in the future. It also fixes some bugs exposed by Legalizing
using RAUW aggressively.
Remove the part of LegalizeOps that attempted to patch up invalid chain
operands on libcalls generated by LegalizeTypes, since it doesn't work
with the new LegalizeOps traversal order. Instead, define what
LegalizeTypes is doing to be correct, and transfer the responsibility
of keeping calls from having overlapping calling sequences into the
scheduler.
Teach the scheduler to model callseq_begin/end pairs as having a
physical register definition/use to prevent calls from having
overlapping calling sequences. This is also somewhat complicated, though
there are ways it might be simplified in the future.
This addresses rdar://9816668, rdar://10043614, rdar://8434668, and others.
Please direct high-level questions about this patch to management.
Delete #if 0 code accidentally left in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143188 91177308-0d34-0410-b5e6-96231b3b80d8
on every node as it legalizes them. This makes it easier to use
hasOneUse() heuristics, since unneeded nodes can be removed from the
DAG earlier.
Make LegalizeOps visit the DAG in an operands-last order. It previously
used operands-first, because LegalizeTypes has to go operands-first, and
LegalizeTypes used to be part of LegalizeOps, but they're now split.
The operands-last order is more natural for several legalization tasks.
For example, it allows lowering code for nodes with floating-point or
vector constants to see those constants directly instead of seeing the
lowered form (often constant-pool loads). This makes some things
somewhat more complicated today, though it ought to allow things to be
simpler in the future. It also fixes some bugs exposed by Legalizing
using RAUW aggressively.
Remove the part of LegalizeOps that attempted to patch up invalid chain
operands on libcalls generated by LegalizeTypes, since it doesn't work
with the new LegalizeOps traversal order. Instead, define what
LegalizeTypes is doing to be correct, and transfer the responsibility
of keeping calls from having overlapping calling sequences into the
scheduler.
Teach the scheduler to model callseq_begin/end pairs as having a
physical register definition/use to prevent calls from having
overlapping calling sequences. This is also somewhat complicated, though
there are ways it might be simplified in the future.
This addresses rdar://9816668, rdar://10043614, rdar://8434668, and others.
Please direct high-level questions about this patch to management.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143177 91177308-0d34-0410-b5e6-96231b3b80d8
not depend on In32BitMode. Use the sysexitq mnemonic for the version with the
REX.W prefix and only allow it only In64BitMode. rdar://9738584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143112 91177308-0d34-0410-b5e6-96231b3b80d8
MORESTACK_RET_RESTORE_R10; which are lowered to a RET and a RET
followed by a MOV respectively. Having a fake instruction prevents
the verifier from seeing a MachineBasicBlock end with a
non-terminator (MOV). It also prevents the rather eccentric case of a
MachineBasicBlock ending with RET but having successors nevertheless.
Patch by Sanjoy Das.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143062 91177308-0d34-0410-b5e6-96231b3b80d8
