x * 40
=>
shlq $3, %rdi
leaq (%rdi,%rdi,4), %rax
This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq (%rdi,%rdi,2), %rax
leaq (%rsi,%rax,8), %rax
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67917 91177308-0d34-0410-b5e6-96231b3b80d8
Also fixes SDISel so it *does not* force promote return value if the function is not marked signext / zeroext.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67701 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. allocating for GR32, bh is not used, updating bl spill weight.
bl should get the same spill weight otherwise it will be choosen
as a spill candidate since spilling bh doesn't make ebx available.
This fix PR2866.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67574 91177308-0d34-0410-b5e6-96231b3b80d8
same as a normal i80 {low64, high16} rather
than its own {high64, low16}. A depressing number
of places know about this; I think I got them all.
Bitcode readers and writers convert back to the old
form to avoid breaking compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67562 91177308-0d34-0410-b5e6-96231b3b80d8
%RAX<def> = ...
%RAX<def> = SUBREG_TO_REG 0, %EAX:3<kill>, 3
The first def is defining RAX, not EAX so the top bits were not zero-extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67511 91177308-0d34-0410-b5e6-96231b3b80d8
and expanding a bit convert (PR3711). In both cases, we extract the
valid part of the widen vector and then do the conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67175 91177308-0d34-0410-b5e6-96231b3b80d8
not safe in general because the immediate could be an arbitrary
value that does not fit in a 32-bit pcrel displacement.
Conservatively fall back to loading the value into a register
and calling through it.
We still do the optzn on X86-32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67142 91177308-0d34-0410-b5e6-96231b3b80d8
it is not APInt clean, but even when it is it needs to be evaluated carefully
to determine whether it is actually profitable.
This fixes a crash on PR3806
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67134 91177308-0d34-0410-b5e6-96231b3b80d8
to see if this is producing the expected code or not, I'm
not sure what the test was intended to check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67099 91177308-0d34-0410-b5e6-96231b3b80d8
size by the array amount as an i32 value instead of promoting from
i32 to i64 then doing the multiply. Not doing this broke wrap-around
assumptions that the optimizers (validly) made. The ultimate real
fix for this is to introduce i64 version of alloca and remove mallocinst.
This fixes PR3829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67093 91177308-0d34-0410-b5e6-96231b3b80d8
vector shuffle mask. Forced the mask to be built using i32. Note: this will
be irrelevant once vector_shuffle no longer takes a build vector for the
shuffle mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67076 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix fabs, fneg for f32 and f64.
- Use BuildVectorSDNode.isConstantSplat, now that the functionality exists
- Continue to improve i64 constant lowering. Lower certain special constants
to the constant pool when they correspond to SPU's shufb instruction's
special mask values. This avoids the overhead of performing a shuffle on a
zero-filled vector just to get the special constant when the memory load
suffices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67067 91177308-0d34-0410-b5e6-96231b3b80d8
U test/CodeGen/X86/2009-03-13-PHIElimBug.ll
D test/CodeGen/X86/2009-03-16-PHIElimInLPad.ll
U lib/CodeGen/PHIElimination.cpp
r67049 was causing this failure:
Running /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/dg.exp ...
FAIL: /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll for PR3784
Failed with exit(1) at line 1
while running: llvm-as < /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll | llc -march=x86 | /usr/bin/grep -A 2 {call f} | /usr/bin/grep movl
child process exited abnormally
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67051 91177308-0d34-0410-b5e6-96231b3b80d8
how invokes are set up. The fix could be disturbed by
register copies coming after the EH_LABEL, and also didn't
behave quite right when it was the invoke result that
was used in a phi node. Also (see new testcase) fix
another phi elimination bug while there: register copies
in the landing pad need to come after the EH_LABEL, because
that's where execution branches to when unwinding. If they
come before the EH_LABEL then they will never be executed...
Also tweak the original testcase so it doesn't use a no-longer
existing counter.
The accumulated phi elimination changes fix two of seven Ada
testsuite failures that turned up after landing pad critical
edge splitting was turned off. So there's probably more to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67049 91177308-0d34-0410-b5e6-96231b3b80d8
Incorporate Tilmann's 128-bit operation patch. Evidently, it gets the
llvm-gcc bootstrap a bit further along.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67048 91177308-0d34-0410-b5e6-96231b3b80d8
ptrtoint and inttoptr in X86FastISel. These casts aren't always
handled in the generic FastISel code because X86 sometimes needs
custom code to do truncation and zero-extension.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66988 91177308-0d34-0410-b5e6-96231b3b80d8
by inserting explicit zero extensions where necessary. Included
is a testcase where SelectionDAG produces a virtual register
holding an i1 value which FastISel previously mistakenly assumed
to be zero-extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66941 91177308-0d34-0410-b5e6-96231b3b80d8
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
for i32/i64 expressions (we could also do i16 on cpus where
i16 lea is fast, but I didn't add this). On the example, we now
generate:
_test:
movl 4(%esp), %eax
cmpl $42, (%eax)
setl %al
movzbl %al, %eax
leal 4(%eax,%eax,8), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
cmpl $41, (%eax)
movl $4, %ecx
movl $13, %eax
cmovg %ecx, %eax
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66869 91177308-0d34-0410-b5e6-96231b3b80d8
operands can't both be fully folded at the same time. For example,
in the included testcase, a global variable is being added with
an add of two values. The global variable wants RIP-relative
addressing, so it can't share the address with another base
register, but it's still possible to fold the initial add.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66865 91177308-0d34-0410-b5e6-96231b3b80d8
in the Ada testcase. Reverting this only covers up
the real problem, which is a nasty conceptual difficulty
in the phi elimination pass: when eliminating phi nodes
in landing pads, the register copies need to come before
the invoke, not at the end of the basic block which is
too late... See PR3784.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66826 91177308-0d34-0410-b5e6-96231b3b80d8
related transformations out of target-specific dag combine into the
ARM backend. These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).
Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0 -> (zext(cond) << 3). This happens frequently
with the recently added cp constant select optimization, but is a
very general xform. For example, we now compile the second example
in const-select.ll to:
_test:
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
seta %al
movzbl %al, %eax
movl 4(%esp), %ecx
movsbl (%ecx,%eax,4), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
leal 4(%eax), %ecx
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
cmovbe %eax, %ecx
movsbl (%ecx), %eax
ret
This passes multisource and dejagnu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66779 91177308-0d34-0410-b5e6-96231b3b80d8
alignment of the generated constant pool entry to the
desired alignment of a type. If we don't do this, we end up
trying to do movsd from 4-byte alignment memory. This fixes
450.soplex and 456.hmmer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66641 91177308-0d34-0410-b5e6-96231b3b80d8
1. Use the same value# to represent unknown values being merged into sub-registers.
2. When coalescer commute an instruction and the destination is a physical register, update its sub-registers by merging in the extended ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66610 91177308-0d34-0410-b5e6-96231b3b80d8
the same say the "test" instruction does in overflow cases,
so eliminating the test is only safe when those bits aren't
needed, as is the case for COND_E and COND_NE, or if it
can be proven that no overflow will occur. For now, just
restrict the optimization to COND_E and COND_NE and don't
do any overflow analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66318 91177308-0d34-0410-b5e6-96231b3b80d8
with multiple chain operands. This can occur when the scheduler
has added chain operands to a node that already has a chain
operand, in order to handle physical register dependencies.
This fixes an llvm-gcc bootstrap failure on x86-64 introduced
in r66058.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66240 91177308-0d34-0410-b5e6-96231b3b80d8
so it changed it into a 31 via the TLO.ShrinkDemandedConstant() call. Then it
would go through the DAG combiner again. This time it had a value of 31, which
was turned into a -1 by TLI.SimplifyDemandedBits(). This would ping pong
forever.
Teach the TLO.ShrinkDemandedConstant() call not to lower a value if the demanded
value is an XOR of all ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65985 91177308-0d34-0410-b5e6-96231b3b80d8
instruction. The class also consolidates the code for detecting constant
splats that's shared across PowerPC and the CellSPU backends (and might be
useful for other backends.) Also introduces SelectionDAG::getBUID_VECTOR() for
generating new BUILD_VECTOR nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65296 91177308-0d34-0410-b5e6-96231b3b80d8
Now we're using one gross, but quite robust hack :) (previous ones
did not work, for example, when ext_weak symbol was used deep inside
constant expression in the initializer).
The proper fix of this problem will require some quite huge asmprinter
changes and that's why was postponed. This fixes PR3629 by the way :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65230 91177308-0d34-0410-b5e6-96231b3b80d8
addresses, part 1. This fixes an obvious logic bug. Previously if the only
in-loop use is a PHI, it would return AllUsesAreAddresses as true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65178 91177308-0d34-0410-b5e6-96231b3b80d8
reduction of address calculations down to basic pointer arithmetic.
This is currently off by default, as it needs a few other features
before it becomes generally useful. And even when enabled, full
strength reduction is only performed when it doesn't increase
register pressure, and when several other conditions are true.
This also factors out a bunch of exisiting LSR code out of
StrengthReduceStridedIVUsers into separate functions, and tidies
up IV insertion. This actually decreases register pressure even
in non-superhero mode. The change in iv-users-in-other-loops.ll
is an example of this; there are two more adds because there are
two fewer leas, and there is less spilling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65108 91177308-0d34-0410-b5e6-96231b3b80d8
Enhance instcombine to use the preferred field of
GetOrEnforceKnownAlignment in more cases, so that regular IR operations are
optimized in the same way that the intrinsics currently are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64623 91177308-0d34-0410-b5e6-96231b3b80d8
addrec in a different loop to check the value being added to
the accumulated Start value, not the Start value before it has
the new value added to it. This prevents LSR from going crazy
on the included testcase. Dale, please review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64440 91177308-0d34-0410-b5e6-96231b3b80d8
after sorting by stride value. This prevents it from missing
IV reuse opportunities in a host-sensitive manner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64415 91177308-0d34-0410-b5e6-96231b3b80d8
in inline asm as signed (what gcc does). Add partial support
for x86-specific "e" and "Z" constraints, with appropriate
signedness for printing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64400 91177308-0d34-0410-b5e6-96231b3b80d8
unless they actually have data successors, and likewise for nodes
with no data successors unless they actually have data precessors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64327 91177308-0d34-0410-b5e6-96231b3b80d8
It was transforming (x&y)==y to (x&y)!=0 in the case where
y is variable and known to have at most one bit set (e.g. z&1).
This is not correct; the expressions are not equivalent when y==0.
I believe this patch salvages what can be salvaged, including
all the cases in bt.ll. Dan, please review.
Fixes gcc.c-torture/execute/20040709-[12].c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64314 91177308-0d34-0410-b5e6-96231b3b80d8
in any old order. Since analyzing a node analyzes its
operands also, this can mean that when we pop a node
off the list of nodes to be analyzed, it may already
have been analyzed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63632 91177308-0d34-0410-b5e6-96231b3b80d8
With the new world order, it can handle cases where the first
store into the alloca is an element of the vector, instead of
requiring the first analyzed store to have the vector type
itself. This allows us to un-xfail
test/CodeGen/X86/vec_ins_extract.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63590 91177308-0d34-0410-b5e6-96231b3b80d8
--This line, and those below, will be ignaored--
A test/CodeGen/X86/nosse-error1.ll
A test/CodeGen/X86/nosse-error2.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63496 91177308-0d34-0410-b5e6-96231b3b80d8
crashes or wrong code with codegen of large integers:
eliminate the legacy getIntegerVTBitMask and
getIntegerVTSignBit methods, which returned their
value as a uint64_t, so couldn't handle huge types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63494 91177308-0d34-0410-b5e6-96231b3b80d8
returned by getShiftAmountTy may be too small
to hold shift values (it is an i8 on x86-32).
Before and during type legalization, use a large
but legal type for shift amounts: getPointerTy;
afterwards use getShiftAmountTy, fixing up any
shift amounts with a big type during operation
legalization. Thanks to Dan for writing the
original patch (which I shamelessly pillaged).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63482 91177308-0d34-0410-b5e6-96231b3b80d8
dagcombines that help it match in several more cases. Add
several more cases to test/CodeGen/X86/bt.ll. This doesn't
yet include matching for BT with an immediate operand, it
just covers more register+register cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63266 91177308-0d34-0410-b5e6-96231b3b80d8
checking logic. Rather than make the checking more
complicated, I've tweaked some logic to make things
conform to how the checking thought things ought to
be, since this results in a simpler "mental model".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63048 91177308-0d34-0410-b5e6-96231b3b80d8
- Rename fcmp.ll test to fcmp32.ll, start adding new double tests to fcmp64.ll
- Fix select_bits.ll test
- Capitulate to the DAGCombiner and move i64 constant loads to instruction
selection (SPUISelDAGtoDAG.cpp).
<rant>DAGCombiner will insert all kinds of 64-bit optimizations after
operation legalization occurs and now we have to do most of the work that
instruction selection should be doing twice (once to determine if v2i64
build_vector can be handled by SelectCode(), which then runs all of the
predicates a second time to select the necessary instructions.) But,
CellSPU is a good citizen.</rant>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62990 91177308-0d34-0410-b5e6-96231b3b80d8
%reg1028<def> = EXTRACT_SUBREG %reg1027<kill>, 1
%reg1029<def> = MOV8rr %reg1028
%reg1029<def> = SHR8ri %reg1029, 7, %EFLAGS<imp-def,dead>
insert => %reg1030<def> = MOV8rr %reg1028
%reg1030<def> = ADD8rr %reg1028<kill>, %reg1029<kill>, %EFLAGS<imp-def,dead>
In this case, it might not be possible to coalesce the second MOV8rr
instruction if the first one is coalesced. So it would be profitable to
commute it:
%reg1028<def> = EXTRACT_SUBREG %reg1027<kill>, 1
%reg1029<def> = MOV8rr %reg1028
%reg1029<def> = SHR8ri %reg1029, 7, %EFLAGS<imp-def,dead>
insert => %reg1030<def> = MOV8rr %reg1029
%reg1030<def> = ADD8rr %reg1029<kill>, %reg1028<kill>, %EFLAGS<imp-def,dead>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62954 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify x+0 to x in unsafe-fp-math mode. This avoids a bunch of
redundant work in many cases, because in unsafe-fp-math mode,
ISD::FADD with a constant is considered free to negate, so the
DAGCombiner often negates x+0 to -0-x thinking it's free, when
in reality the end result is -x, which is more expensive than x.
Also, combine x*0 to 0.
This fixes PR3374.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62789 91177308-0d34-0410-b5e6-96231b3b80d8
special cases after producing the new reduced-width load, because the
new load already has the needed adjustments built into it. This fixes
several bugs due to the special cases, including PR3317.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62692 91177308-0d34-0410-b5e6-96231b3b80d8
we want to clear %ah to zero before a division, just use a
zero-extending mov to %al. This fixes PR3366.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62691 91177308-0d34-0410-b5e6-96231b3b80d8
this test into FrontendC to ensure that llvm-gcc
is available; assemble using "llvm-gcc -xassembler"
rather than "as".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62683 91177308-0d34-0410-b5e6-96231b3b80d8
- Ensure that (operation) legalization emits proper FDIV libcall when needed.
- Fix various bugs encountered during llvm-spu-gcc build, along with various
cleanups.
- Start supporting double precision comparisons for remaining libgcc2 build.
Discovered interesting DAGCombiner feature, which is currently solved via
custom lowering (64-bit constants are not legal on CellSPU, but DAGCombiner
insists on inserting one anyway.)
- Update README.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62664 91177308-0d34-0410-b5e6-96231b3b80d8
as its comment says, even in the case where it will be generating
extending loads. This fixes PR3216.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62557 91177308-0d34-0410-b5e6-96231b3b80d8
uses are added to the From node while it is processing From's
use list, because of automatic local CSE. The fix is to avoid
visiting any new uses.
Fix a few places in the DAGCombiner that assumed that after
a RAUW call, the From node has no users and may be deleted.
This fixes PR3018.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62533 91177308-0d34-0410-b5e6-96231b3b80d8
optimize it to a SINT_TO_FP when the sign bit is known zero. X86 isel should perform the optimization itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62504 91177308-0d34-0410-b5e6-96231b3b80d8
simple %prcontext which doesn't find what it's looking for
if the scheduler has rearranged the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62363 91177308-0d34-0410-b5e6-96231b3b80d8
sequences in SPUDAGToDAGISel.cpp and SPU64InstrInfo.td, killing custom
DAG node types as needed.
- i64 mul is now a legal instruction, but emits an instruction sequence
that stretches tblgen and the imagination, as well as violating laws of
several small countries and most southern US states (just kidding, but
looking at a function with 80+ parameters is really weird and just plain
wrong.)
- Update tests as needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62254 91177308-0d34-0410-b5e6-96231b3b80d8
frame index. eliminateFrameIndex will replace these instructions with
(LDWSP|STWSP|LDAWSP) or (LDW|STW|LDAWF) if a frame pointer is in use.
This fixes PR 3324. Previously we used LDWSP, STWSP, LDAWSP before frame
pointer elimination. However since they were marked as implicitly using
SP they could not be rematerialised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62238 91177308-0d34-0410-b5e6-96231b3b80d8
to Eli for pointing out that these forms don't ignore the high bits of
their index operands, and as such are not immediately suitable for use
by isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62194 91177308-0d34-0410-b5e6-96231b3b80d8
scheduling dependencies. Add assertion checks to help catch
this.
It appears the Mips target defaults to list-td, and it has a
regression test that uses a physreg dependence. Such code was
liable to be miscompiled, and now evokes an assertion failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62177 91177308-0d34-0410-b5e6-96231b3b80d8
via two paths, process it once not twice, d'oh!
Analysis, testcase and original patch thanks to
Mon Ping Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62169 91177308-0d34-0410-b5e6-96231b3b80d8
Also future proof the scheduler to handle "normal" physical register dependencies. The code is not exercised yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62074 91177308-0d34-0410-b5e6-96231b3b80d8
v1024 = EDI // not killed
=
= EDI
One possible solution is for the coalescer to examine the sub-register live intervals in the same manner as the physical register. Another possibility is to examine defs and uses (when needed) of sub-registers. Both solutions are too expensive. For now, look for "short virtual intervals" and scan instructions to look for conflict instead.
This is a small win on x86-64. e.g. It shaves 403.gcc by ~80 instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61847 91177308-0d34-0410-b5e6-96231b3b80d8
into their left operand, rather than their right. Do this
by commuting the operands and inverting the condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61842 91177308-0d34-0410-b5e6-96231b3b80d8
avoid the need for spilling, add a new testcase that tests that the
pcmpeqd used for V_SETALLONES is changed to a constant-pool load as
needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61831 91177308-0d34-0410-b5e6-96231b3b80d8
converted to LEA64_32r in x86's convertToThreeAddress. This
replaces code like this:
movl %esi, %edi
inc %edi
with this:
lea 1(%rsi), %edi
which appears to be beneficial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61830 91177308-0d34-0410-b5e6-96231b3b80d8
aggregate types. Don't increment the current index after reaching
the end of a struct, as it will already be pointing at
one-past-the end. This fixes PR3288.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61828 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix bugs 3194, 3195: i128 load/stores produce correct code (although, we
need to ensure that i128 is 16-byte aligned in real life), and 128 zero-
extends are supported.
- New td file: SPU128InstrInfo.td: this is where all new i128 support should
be put in the future.
- Continue to hammer on i64 operations and test cases; ensure that the only
remaining problem will be i64 mul.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61784 91177308-0d34-0410-b5e6-96231b3b80d8
AddPseudoTwoAddrDeps. This lets the scheduling infrastructure
avoid recalculating node heights. In very large testcases this
was a major bottleneck. Thanks to Roman Levenstein for finding
this!
As a side effect, fold-pcmpeqd-0.ll is now scheduled better
and it no longer requires spilling on x86-32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61778 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix (brcond (setq ...)) bug, where BRNZ should have been used vice BRZ.
- Kill unused/unnecessary nodes in SPUNodes.td
- Beef out the i64operations.c test harness to use a lot of unaligned
loads, test loops and LLVM loop/basic block optimizations; run the
test harness successfully on real Cell hardware.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61664 91177308-0d34-0410-b5e6-96231b3b80d8
- Remove custom lowering for BRCOND
- Add remaining functionality for branches in SPUInstrInfo, such as branch
condition reversal and load/store folding. Updated BrCond test to reflect
branch reversal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61597 91177308-0d34-0410-b5e6-96231b3b80d8
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61542 91177308-0d34-0410-b5e6-96231b3b80d8
instruction sequence and cannot ordinarily be simplified by DAGcombine
into the various target description files or SPUDAGToDAGISel.cpp.
This makes some 64-bit operations legal.
- Eliminate target-dependent ISD enums.
- Update tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61508 91177308-0d34-0410-b5e6-96231b3b80d8
DAGcombine's ability to find reasons to remove truncates when they were not
needed. Consequently, the CellSPU backend would produce correct, but _really
slow and horrible_, code.
Replaced with instruction sequences that do the equivalent truncation in
SPUInstrInfo.td.
- Re-examine how unaligned loads and stores work. Generated unaligned
load code has been tested on the CellSPU hardware; see the i32operations.c
and i64operations.c in CodeGen/CellSPU/useful-harnesses. (While they may be
toy test code, it does prove that some real world code does compile
correctly.)
- Fix truncating stores in bug 3193 (note: unpack_df.ll will still make llc
fault because i64 ult is not yet implemented.)
- Added i64 eq and neq for setcc and select/setcc; started new instruction
information file for them in SPU64InstrInfo.td. Additional i64 operations
should be added to this file and not to SPUInstrInfo.td.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61447 91177308-0d34-0410-b5e6-96231b3b80d8
constant shift count that doesn't fit in the shift instruction's
immediate field. This fixes PR3242.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61281 91177308-0d34-0410-b5e6-96231b3b80d8
172 %ECX<def> = MOV32rr %reg1039<kill>
180 INLINEASM <es:subl $5,$1
sbbl $3,$0>, 10, %EAX<def>, 14, %ECX<earlyclobber,def>, 9, %EAX<kill>,
36, <fi#0>, 1, %reg0, 0, 9, %ECX<kill>, 36, <fi#1>, 1, %reg0, 0
188 %EAX<def> = MOV32rr %EAX<kill>
196 %ECX<def> = MOV32rr %ECX<kill>
204 %ECX<def> = MOV32rr %ECX<kill>
212 %EAX<def> = MOV32rr %EAX<kill>
220 %EAX<def> = MOV32rr %EAX
228 %reg1039<def> = MOV32rr %ECX<kill>
The early clobber operand ties ECX input to the ECX def.
The live interval of ECX is represented as this:
%reg20,inf = [46,47:1)[174,230:0) 0@174-(230) 1@46-(47)
The right way to represent this is something like
%reg20,inf = [46,47:2)[174,182:1)[181:230:0) 0@174-(182) 1@181-230 @2@46-(47)
Of course that won't work since that means overlapping live ranges defined by two val#.
The workaround for now is to add a bit to val# which says the val# is redefined by a early clobber def somewhere. This prevents the move at 228 from being optimized away by SimpleRegisterCoalescing::AdjustCopiesBackFrom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61259 91177308-0d34-0410-b5e6-96231b3b80d8
- Use SplitBlockPredecessors to factor out common predecessors of the critical edge destination. This is disabled for now due to some regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61248 91177308-0d34-0410-b5e6-96231b3b80d8
The EH_frame and .eh symbols are now private, except for darwin9 and earlier.
The patch also fixes the definition of PrivateGlobalPrefix on pcc linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61242 91177308-0d34-0410-b5e6-96231b3b80d8
DAGTypeLegalizer::ExpandShiftWithKnownAmountBit.
In terms of restoring the optimization, the best fix here isn't
obvious... any ideas?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61119 91177308-0d34-0410-b5e6-96231b3b80d8
computation code. Also, avoid adding output-depenency edges when both
defs are dead, which frequently happens with EFLAGS defs.
Compute Depth and Height lazily, and always in terms of edge latency
values. For the schedulers that don't care about latency, edge latencies
are set to 1.
Eliminate Cycle and CycleBound, and LatencyPriorityQueue's Latencies array.
These are all subsumed by the Depth and Height fields.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61073 91177308-0d34-0410-b5e6-96231b3b80d8
and insert vector element. Modified extract vector element to extend the
result to match the expected promoted type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61029 91177308-0d34-0410-b5e6-96231b3b80d8
which are identical to the original patterns.
- Change the multiply with overflow so that we distinguish between signed and
unsigned multiplication. Currently, unsigned multiplication with overflow
isn't working!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60963 91177308-0d34-0410-b5e6-96231b3b80d8
for promoted integer types, eg: i16 on ppc-32, or
i24 on any platform. Complete support for arbitrary
precision integers would require handling expanded
integer types, eg: i128, but I couldn't be bothered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60834 91177308-0d34-0410-b5e6-96231b3b80d8
overflow/carry from the "arithmetic with overflow" intrinsics. It searches the
machine basic block from bottom to top to find the SETO/SETC instruction that is
its conditional. If an instruction modifies EFLAGS before it reaches the
SETO/SETC instruction, then it defaults to the normal instruction emission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60807 91177308-0d34-0410-b5e6-96231b3b80d8
target-independent way of determining overflow on multiplication. It's very
tricky. Patch by Zoltan Varga!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60800 91177308-0d34-0410-b5e6-96231b3b80d8
essential problem was that the DAG can contain
random unused nodes which were never analyzed.
When remapping a value of a node being processed,
such a node may become used and need to be analyzed;
however due to operands being transformed during
analysis the node may morph into a different one.
Users of the morphing node need to be updated, and
this wasn't happening. While there I added a bunch
of documentation and sanity checks, so I (or some
other poor soul) won't have to scratch their head
over this stuff so long trying to remember how it
was all supposed to work next time some obscure
problem pops up! The extra sanity checking exposed
a few places where invariants weren't being preserved,
so those are fixed too. Since some of the sanity
checking is expensive, I added a flag to turn it
on. It is also turned on when building with
ENABLE_EXPENSIVE_CHECKS=1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60797 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix call.ll and call_indirect.ll expected results, now that it's using a
different pre-register allocation scheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60741 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the shift amount when unrolling a vector shift into scalar shifts.
Fix problem in getShuffleScalarElt where it assumes that the input of
a bit convert must be a vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60740 91177308-0d34-0410-b5e6-96231b3b80d8
and use it in x86 address mode folding. Also, make
getRegForValue return 0 for illegal types even if it has a
ValueMap for them, because Argument values are put in the
ValueMap. This fixes PR3181.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60696 91177308-0d34-0410-b5e6-96231b3b80d8
loops when they can be subsumed into addressing modes.
Change X86 addressing mode check to realize that
some PIC references need an extra register.
(I believe this is correct for Linux, if not, I'm sure
someone will tell me.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60608 91177308-0d34-0410-b5e6-96231b3b80d8
1. GlobalBaseReg may have been spilled.
2. It may not be live at the use.
3. Spiller doesn't know this is happening so it won't prevent GlobalBaseReg from being spilled later (That by itself is a nasty hack. It's needed because we don't insert the reload until later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60595 91177308-0d34-0410-b5e6-96231b3b80d8
