The dump was dependent on a feature string, which meant that it couldn't
be disabled or enable on a per compile basis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225275 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure they all have llvm_unreachable on the default path out of the switch. Remove unnecessary "default: break". Remove a 'return' after unreachable. Fix some indentation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225114 91177308-0d34-0410-b5e6-96231b3b80d8
The issues was that AArch64 has additional restrictions on when local
relocations can be used. We have to take those into consideration when
deciding to put a L symbol in the symbol table or not.
Original message:
Remove doesSectionRequireSymbols.
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225048 91177308-0d34-0410-b5e6-96231b3b80d8
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224985 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the existing code which handles this for zext. This makes this
more useful for targets with ZeroOrNegativeOne BooleanContent and
obsoletes a custom combine SI uses for i1 setcc (sext(i1), 0, setne)
since the constant will now be shrunk to i1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224691 91177308-0d34-0410-b5e6-96231b3b80d8
The constant bus restrictions only apply to VALU instructions. This
enables SIFoldOperands to fold immediates into SALU instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224623 91177308-0d34-0410-b5e6-96231b3b80d8
mubuf instructions now define the soffset field using the SCSrc_32
register class which indicates that only SGPRs and inline constants
are allowed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224622 91177308-0d34-0410-b5e6-96231b3b80d8
The returned operand needs to be permuted for the unordered
compares. Also fix incorrectly producing fmin_legacy / fmax_legacy
for f64, which don't exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224094 91177308-0d34-0410-b5e6-96231b3b80d8
This is nice for the instruction patterns, but it complicates
min / max matching. The select doesn't have the correct type and would
require looking through the bitcasts for the real float operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224092 91177308-0d34-0410-b5e6-96231b3b80d8
Add an option to disable optimization to shrink truncated larger type
loads to smaller type loads. On SI this prevents using scalar load
instructions in some cases, since there are no scalar extloads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224084 91177308-0d34-0410-b5e6-96231b3b80d8
This was checking if pseudo-operands like the source
modifiers were using the constant bus, which happens to work
because the values these all can be happen to be valid inline
immediates.
This fixes a later commit which starts checking the register class
of the operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224078 91177308-0d34-0410-b5e6-96231b3b80d8
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
This is the 2nd attempt at this after realizing that PassManager::add() may
actually delete the pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224059 91177308-0d34-0410-b5e6-96231b3b80d8
Previously print+verify passes were added in a very unsystematic way, which is
annoying when debugging as you miss intermediate steps and allows bugs to stay
unnotice when no verification is performed.
To make this change practical I added the possibility to explicitely disable
verification. I used this option on all places where no verification was
performed previously (because alot of places actually don't pass the
MachineVerifier).
In the long term these problems should be fixed properly and verification
enabled after each pass. I'll enable some more verification in subsequent
commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224042 91177308-0d34-0410-b5e6-96231b3b80d8
There are 3 changes:
- Convert 32-bit S_LSHL/LSHR/ASHR to their V_*REV variants for VI
- Lower RSQ_CLAMP for VI
- Don't generate MIN/MAX_LEGACY on VI
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223604 91177308-0d34-0410-b5e6-96231b3b80d8
Use the MCAsmInfo instead of the DataLayout, and allow
specifying a custom prefix for labels specifically. HSAIL
requires that labels begin with @, but global symbols with &.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223323 91177308-0d34-0410-b5e6-96231b3b80d8
This pass needs to be run after PrologEpilogInserter, because
that pass may inserter spill code which reads or writes memory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223253 91177308-0d34-0410-b5e6-96231b3b80d8
Select i1 logical ops directly to 64-bit SALU instructions.
Vector i1 values are always really in SGPRs, with each
bit for each item in the wave. This saves about 4 instructions
when and/or/xoring any condition, and also helps write conditions
that need to be passed in vcc.
This should work correctly now that the SGPR live range
fixing pass works. More work is needed to eliminate the VReg_1
pseudo regclass and possibly the entire SILowerI1Copies pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223206 91177308-0d34-0410-b5e6-96231b3b80d8
The loop is over the operands of an instruction, and checks the
register with the sub reg index of the dest register. This probably
meant to be checking the sub reg index of the same operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223205 91177308-0d34-0410-b5e6-96231b3b80d8
m0 is treated as a virtual register class with a single register
rather than the physical register it really is. This was updating
the live range of the used virtual copy of m0 from the first ds_read
instruction, and leaving the unused copy unchanged. This resulted in a
"Live segment doesn't end at a valid instruction" verifier error because
the erased instructions. Update the live range of the second copy (which
should be dead).
No test since I'm not sure how to trigger this with SIFoldOperands
enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223203 91177308-0d34-0410-b5e6-96231b3b80d8
We just needed to remove the assertion in
AMDGPURegisterInfo::getFrameRegister(), which is called when
initializing the parser for inline assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223197 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix missing SALU format bits
- Remove unused isSALUInstr
- Add isVALU
- Switch isDS to use a bit like the others
- Move SIInstrInfo::is* functions to header
- Reorder so they are approximately sorted by type (SALU, VALU, memory)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223038 91177308-0d34-0410-b5e6-96231b3b80d8
This sort of doesn't matter since the setcc type is i1, but
this previously was using the default UndefinedBooleanContent. This
makes it more consistent with R600. This enables more optimizations
which typically give up on UndefinedBooleanContent. For example,
there is already a special case target DAG combine for
setcc + sext which can be eliminated in favor of what the generic
DAG combiner can do if it assumes boolean values are sign extended.
Since -1 is an inline immediate, using it is basically free and the
backend already uses it when a boolean value is needed in a wider type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222850 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes moving boolean constants into registers before operating
on them. They get permuted and shrunk down to e32 anyway later. This
is a temporary fix until the patch that removes these pseudos is
committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222844 91177308-0d34-0410-b5e6-96231b3b80d8
Only the super register flat_scr was marked as reserved,
so in some cases with high register usage it would still
try to allocate the subregisters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222737 91177308-0d34-0410-b5e6-96231b3b80d8
i1 is not a legal type on Evergreen, so this combine proceeded
and tried to produce a bitcast between i1 and i8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222630 91177308-0d34-0410-b5e6-96231b3b80d8
We need to use a s_mov_b32 rather than a copy, so that CSE will
eliminate redundant moves to the m0 register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222584 91177308-0d34-0410-b5e6-96231b3b80d8
This s_mov_b32 will write to a virtual register from the M0Reg
class and all the ds instructions now take an extra M0Reg explicit
argument.
This change is necessary to prevent issues with the scheduler
mixing together instructions that expect different values in the m0
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222583 91177308-0d34-0410-b5e6-96231b3b80d8
A register operand that has a common sub-class with its instruction's
defined register class is not always legal. For example,
SReg_32 and M0Reg both have a common sub-class, but we can't
use an SReg_32 in instructions that expect a M0Reg.
This prevents the llvm.SI.sendmsg.ll test from failing when the fold
operand pass is added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222368 91177308-0d34-0410-b5e6-96231b3b80d8
This partially makes up for not having address spaces
used for alias analysis in some simple cases.
This is not yet enabled by default so shouldn't change anything yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222286 91177308-0d34-0410-b5e6-96231b3b80d8
Assuming unmodeled side effects interferes with some scheduling
opportunities.
Don't put it in the base class of DS instructions since there
are a few weird effecting, non load/store instructions there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222285 91177308-0d34-0410-b5e6-96231b3b80d8
This should expose more of the actually used VALU
instructions to the machine optimization passes.
This also should help getting i1 handling into a better state.
For not entirly understood reasons, this fixes the split-scalar-i64-add.ll
test where a 64-bit add would only partially be moved to the VALU
resulting in use of undefined VCC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222256 91177308-0d34-0410-b5e6-96231b3b80d8
This was resulting in use of a register after a kill.
For some reason this showed up as a problem in many tests
when moving the SIFixSGPRCopies pass closer to instruction
selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222175 91177308-0d34-0410-b5e6-96231b3b80d8
This gets the correct NaN behavior based on the compare type
the hardware uses. This now passes the new piglit test I have
for this on SI.
Add stricter tests for the operand order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222079 91177308-0d34-0410-b5e6-96231b3b80d8
This is so it could potentially be used by SI. However, the current
implementation does not always produce correct results, so the
IntegerDivisionPass is being used instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222072 91177308-0d34-0410-b5e6-96231b3b80d8
If we have spilled the value of the m0 register, then we need to restore
it with v_readlane_b32 to a regular sgpr, because v_readlane_b32 can't
write to m0.
v_readlane_b32 can't write to m0, so
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222036 91177308-0d34-0410-b5e6-96231b3b80d8
This was done using the Sparc and PowerPC AsmParsers as guides. So far it
is very simple and only supports sopp instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221994 91177308-0d34-0410-b5e6-96231b3b80d8
These were directly using the old base instruction
class, and specifying the wrong register classes
for operands. The operands can be the other special
inputs besides SGPRs. The op name was also being
directly used for the asm string, so this was printed
without any operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221921 91177308-0d34-0410-b5e6-96231b3b80d8
If a function is just an unreachable, this would hit a
"this is not a MachO target" assertion because of setting
HasSubsectionViaSymbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221920 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. v_mad_f32 a, b, c -> v_mad_f32 b, a, c
This simplifies matching v_madmk_f32.
This looks somewhat surprising, but it appears to be
OK to do this. We can commute src0 and src1 in all
of these instructions, and that's all that appears
to matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221910 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, we're going to separate metadata from the Value hierarchy. See
PR21532.
This reverts commit r221375.
This reverts commit r221373.
This reverts commit r221359.
This reverts commit r221167.
This reverts commit r221027.
This reverts commit r221024.
This reverts commit r221023.
This reverts commit r220995.
This reverts commit r220994.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221711 91177308-0d34-0410-b5e6-96231b3b80d8
This matches the format produced by the AMD proprietary driver.
//==================================================================//
// Shell script for converting .ll test cases: (Pass the .ll files
you want to convert to this script as arguments).
//==================================================================//
; This was necessary on my system so that A-Z in sed would match only
; upper case. I'm not sure why.
export LC_ALL='C'
TEST_FILES="$*"
MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r`
for f in $TEST_FILES; do
# Check that there are SI tests:
grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f
if [ $? -eq 0 ]; then
for match in $MATCHES; do
sed -i -e "s/\([ :]$match\)/\L\1/" $f
done
# Try to get check lines with partial instruction names
sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f
fi
done
sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll
sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll
sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll
sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll
sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll
//==================================================================//
// Shell script for converting .td files (run this last)
//==================================================================//
export LC_ALL='C'
sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td
sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
Function calls aren't supported yet.
This was reverted due to build breakages, which should be fixed now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221173 91177308-0d34-0410-b5e6-96231b3b80d8
Change `Instruction::getAllMetadataOtherThanDebugLoc()` from a vector of
`MDNode` to one of `Value`. Part of PR21433.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221167 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is mostly that variadic output instruction
aren't handled, so it is rejected for having an inconsistent
number of operands, and then the right number of operands
isn't emitted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221117 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r220996.
It introduced layering violations causing link errors in many
configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221020 91177308-0d34-0410-b5e6-96231b3b80d8
It appears to ignore or find ambiguous MachineInstrBuilder's conversion
operators that allow conversion to MachineInstr* and
MachineBasicBlock::bundle_iterator.
As a workaround, add an explicit way to get the MachineInstr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221017 91177308-0d34-0410-b5e6-96231b3b80d8
We need to figure out how to track ptrtoint values all the
way until result is converted back to a pointer in order
to correctly rewrite the pointer type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220997 91177308-0d34-0410-b5e6-96231b3b80d8
Every target we support has support for assembly that looks like
a = b - c
.long a
What is special about MachO is that the above combination suppresses the
production of a relocation.
With this change we avoid producing the intermediary labels when they don't
add any value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220256 91177308-0d34-0410-b5e6-96231b3b80d8
The generic code trying to use findCommutedOpIndices won't
understand that it needs to swap the modifier operands also,
so it should fail if they are set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220064 91177308-0d34-0410-b5e6-96231b3b80d8
These haven't been necessary since allowing
selecting SALU instructions in non-entry blocks
was enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219956 91177308-0d34-0410-b5e6-96231b3b80d8
The SelectDS1Addr1Offset complex pattern always tries to store constant
lds pointers in the offset operand and store a zero value in the addr operand.
Since the addr operand does not accept immediates, the zero value
needs to first be copied to a register.
This newly created zero value will not go through normal instruction
selection, so we need to manually insert a V_MOV_B32_e32 in the complex
pattern.
This bug was hidden by the fact that if there was another zero value
in the DAG that had not been selected yet, then the CSE done by the DAG
would use the unselected node for the addr operand rather than the one
that was just created. This would lead to the zero value being selected
and the DAG automatically inserting a V_MOV_B32_e32 instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219848 91177308-0d34-0410-b5e6-96231b3b80d8
This effectively reverts revert 219707. After fixing the test to work with
new function name format and renamed intrinsic.
Reviewed-by: Tom Stellard <tom@stellard.net>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219710 91177308-0d34-0410-b5e6-96231b3b80d8
v2: Add SI lowering
Add test
v3: Place work dimensions after the kernel arguments.
v4: Calculate offset while lowering arguments
v5: rebase
v6: change prefix to AMDGPU
Reviewed-by: Tom Stellard <tom@stellard.net>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219705 91177308-0d34-0410-b5e6-96231b3b80d8
Use 0 as the base address for a constant address, so if
we have a constant address we can save moves and form
read2/write2s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219698 91177308-0d34-0410-b5e6-96231b3b80d8
Currently this only functions to match simple cases
where ds_read2_* / ds_write2_* instructions can be used.
In the future it might match some of the other weird
load patterns, such as direct to LDS loads.
Currently enabled only with a subtarget feature to enable
easier testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219533 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction emitter will crash if it encounters a CopyToReg
node with a non-register operand like FrameIndex.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219428 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM assumes INSERT_SUBREG will always have register operands, so
we need to legalize non-register operands, like FrameIndexes, to
avoid random assertion failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219420 91177308-0d34-0410-b5e6-96231b3b80d8
The main reason for this is that the MCAsmInfo class,
which we were previously using as the base class, sets
PrivateGlobalPrefix to "L", which causes all global
functions that start with L to be treated as local symbols.
MCAsmInfoELF sets PrivateGlobalPrefix to ".L", which is what
we want, and it is probably a good idea to use this as the
base class anyway, since we are emitting ELF binaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219237 91177308-0d34-0410-b5e6-96231b3b80d8
Added a FIXME coment instead, we need to handle the case where the
two DS instructions being compared have different numbers of operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219236 91177308-0d34-0410-b5e6-96231b3b80d8
No tests for omod since nothing uses it yet, but
this should get rid of the remaining annoying trailing
zeros after some instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218692 91177308-0d34-0410-b5e6-96231b3b80d8
These turn into fadds, so combine them into the target
mad node.
fadd (fadd (a, a), b) -> mad 2.0, a, b
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218608 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of moving the first SGPR that is different than the first,
legalize the operand that requires the fewest moves if one
SGPR is used for multiple operands.
This saves extra moves and is also required for some instructions
which require that the same operand be used for multiple operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218532 91177308-0d34-0410-b5e6-96231b3b80d8
Disable the SGPR usage restriction parts of the DAG legalizeOperands.
It now should only be doing immediate folding until it can be replaced
later. The real legalization work is now done by the other
SIInstrInfo::legalizeOperands
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218531 91177308-0d34-0410-b5e6-96231b3b80d8
The base implementation of commuteInstruction is used
in some cases, but it turns out this has been broken for a
long time since modifiers were inserted between the real operands.
The base implementation of commuteInstruction also fails on immediates,
which also needs to be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218530 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. v_cndmask_b32 requires the condition operand be an SGPR.
If one of the source operands were an SGPR, that would be considered
the one SGPR use and the condition operand would be illegally moved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218529 91177308-0d34-0410-b5e6-96231b3b80d8
This needs a test, but I'm not sure if it is currently possible and
I originally hit it due to a bug. Right now the only global address
operands have no reason to be VALU instructions, although it
theoretically could be a problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218528 91177308-0d34-0410-b5e6-96231b3b80d8
No test since the current SIISelLowering::legalizeOperands
effectively hides this, and the general uses seem to only fire
on SALU instructions which don't have modifiers between
the operands.
When trying to use legalizeOperands immediately after
instruction selection, it now sees a lot more patterns
it did not see before which break on this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218527 91177308-0d34-0410-b5e6-96231b3b80d8
No tests hit this, and I don't see any way a GlobalAddress
node would survive beyond lowering on SI. It it would, the
move should probably be inserted by selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218526 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug that is uncovered by a future commit and will
be tested by the test/CodeGen/R600/sgpr-control-flow.ll test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218352 91177308-0d34-0410-b5e6-96231b3b80d8
The previous implementation was extending the live range of SGPRs
by modifying the live intervals directly. This was causing a lot
of machine verification errors when the machine scheduler was enabled.
The new implementation adds pseudo instructions with implicit uses to
extend the live ranges of SGPRs, which works much better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218351 91177308-0d34-0410-b5e6-96231b3b80d8
These registers can be allocated and used like other 32-bit registers,
but it seems like a likely source for bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218350 91177308-0d34-0410-b5e6-96231b3b80d8
Correctly handle special registers: EXEC, EXEC_LO, EXEC_HI, VCC_LO,
VCC_HI, and M0. The previous implementation would assertion fail
when passed these registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218349 91177308-0d34-0410-b5e6-96231b3b80d8
VGPRs are spilled to LDS. This still needs more testing, but
we need to at least enable it at -O0, because the fast register
allocator spills all registers that are live at the end of blocks
and without this some future commits will break the
flat-address-space.ll test.
v2: Only calculate thread id once
v3: Move insertion of spill instructions to
SIRegisterInfo::eliminateFrameIndex()
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218348 91177308-0d34-0410-b5e6-96231b3b80d8
There are new register classes VCSrc_* which represent operands that
can take an SGPR, VGPR or inline constant. The VSrc_* class is now used
to represent operands that can take an SGPR, VGPR, or a 32-bit
immediate.
This allows us to have more accurate checks for legality of
immediates, since before we had no way to distinguish between operands
that supported any 32-bit immediate and operands which could only
support inline constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218334 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218254.
The global_atomics.ll test fails with asserts disabled. For some reason,
the compiler fails to produce the atomic no return variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218257 91177308-0d34-0410-b5e6-96231b3b80d8
BypassSlowDiv is used by codegen prepare to insert a run-time
check to see if the operands to a 64-bit division are really 32-bit
values and if they are it will do 32-bit division instead.
This is not useful for R600, which has predicated control flow since
both the 32-bit and 64-bit paths will be executed in most cases. It
also increases code size which can lead to more instruction cache
misses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218252 91177308-0d34-0410-b5e6-96231b3b80d8
ISD::MUL and ISD:UMULO are the same except that UMULO sets an overflow
bit. Since we aren't using the overflow bit, we should use ISD::MUL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218251 91177308-0d34-0410-b5e6-96231b3b80d8
In r217636, the value stored in KernelInfo.Num[VS]GPRSs was changed from
the highest GPR index used to the number of gprs in order to be
consistent with the name of the variable.
The code writing the config values still assumed that the value in this
variable was the highest GPR index used, which caused the compiler to
over report the number of GPRs being used.
https://bugs.freedesktop.org/show_bug.cgi?id=84089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218150 91177308-0d34-0410-b5e6-96231b3b80d8
shim between the TargetTransformInfo immutable pass and the Subtarget
via the TargetMachine and Function. Migrate a single call from
BasicTargetTransformInfo as an example and provide shims where TargetMachine
begins taking a Function to determine the subtarget.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218004 91177308-0d34-0410-b5e6-96231b3b80d8
Since read2 / write2 are emitted for 4-byte aligned 8-byte
accesses, these are seen by the scheduler.
The DAG scheduler is semi-deprecated, so just
ignore these for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217969 91177308-0d34-0410-b5e6-96231b3b80d8
Only 1 decimal place should be printed for inline immediates.
Other constants should be hex constants.
Does not include f64 tests because folding those inline
immediates currently does not work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217964 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions are now generally selected to the e64 forms originally,
and shrunk down later. Rename foldOperands to legalizeOperands,
since that's really most of what it tries to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217959 91177308-0d34-0410-b5e6-96231b3b80d8
Add some more tests to make sure better operand
choices are still made. Leave some cases that seem
to have no reason to ever be e64 alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217789 91177308-0d34-0410-b5e6-96231b3b80d8
Refactored the R600_LDS_1A2D class a bit to get it to actually work.
It seemed to be previously unused and broken.
We also have to disable the conversion to the noret variant for now in
R600ISelLowering because the getLDSNoRetOp method only handles 1A1D LDS ops.
Someone can feel free to modify the AMDGPU::getLDSNoRetOp method to
work for more than 1A1D variants of LDS operations. It's being left as a
future TODO for now.
Signed-off-by: Aaron Watry <awatry at gmail.com>
Reviewed-by: Matt Arsenault <matthew.arsenault@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217596 91177308-0d34-0410-b5e6-96231b3b80d8
This was only present for SI before.
Cayman may still be missing, but I am unable to test that currently.
v2: Don't create atomicrmw max tests in separate file
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Matt Arsenault <matthew.arsenault@amd.com>
CC: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217589 91177308-0d34-0410-b5e6-96231b3b80d8
Need to convert the 64 element offset into bytes, not just the element
size like the normal case instructions.
Noticed by inspection. This can't be hit now because
st64 instructions aren't emitted during instruction selection,
and the post-RA scheduler isn't enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217560 91177308-0d34-0410-b5e6-96231b3b80d8
Assert in scheduler from an inserted copy_to_regclass from
a constant.
This only seems to break sometimes when a constant initializer
address is forced into VGPRs in a non-entry block. No test
since the only case I've managed to hit only happens with a future
patch, and that case will also not be a problem once scalar instructions
are used in non-entry blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217380 91177308-0d34-0410-b5e6-96231b3b80d8
Only handles LDS atomics for now, and will be used
to replace atomics with no uses with the no return
versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217378 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes hitting the same negative base offset problem
that was already fixed for regular loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217256 91177308-0d34-0410-b5e6-96231b3b80d8
round halfway cases away from zero
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217250 91177308-0d34-0410-b5e6-96231b3b80d8
We must constrain the destination register class of legalized operands
to a VGPR class or else the illegal operand may be folded back into
the instruction by the register coalescer.
This fixes a bug in add.ll that will be uncovered by future commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217249 91177308-0d34-0410-b5e6-96231b3b80d8
Also fix bug this exposed where when legalizing an immediate
operand, a v_mov_b32 would be created with a VSrc dest register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217108 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a crash in the OpenCV test:
ImgprocWarpResizeArea/Resize.Mat/16
There is no test case for this, because this failure depends on a
specific ordering of the loads, which could easily change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217040 91177308-0d34-0410-b5e6-96231b3b80d8
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reinstates commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216982 91177308-0d34-0410-b5e6-96231b3b80d8
int may not have enough bits in it, which was detected by UBSan
bootstrap (it reported left shift by a too large constant).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216579 91177308-0d34-0410-b5e6-96231b3b80d8
These pointers are really just offsets and they will always be
less than 16-bits. Using AssertZExt allows us to use computeKnownBits
to prove that these values are positive. We will use this information
in a later commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216277 91177308-0d34-0410-b5e6-96231b3b80d8
isPow2DivCheap
That name doesn't specify signed or unsigned.
Lazy as I am, I eventually read the function and variable comments. It turns out that this is strictly about signed div. But I discovered that the comments are wrong:
srl/add/sra
is not the general sequence for signed integer division by power-of-2. We need one more 'sra':
sra/srl/add/sra
That's the sequence produced in DAGCombiner. The first 'sra' may be removed when dividing by exactly '2', but that's a special case.
This patch corrects the comments, changes the name of the flag bit, and changes the name of the accessor methods.
No functional change intended.
Differential Revision: http://reviews.llvm.org/D5010
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216237 91177308-0d34-0410-b5e6-96231b3b80d8
This will simplify the SGPR spilling and also allow us to use
MachineFrameInfo for calculating offsets, which should be more
reliable than our custom code.
This fixes a crash in some cases where a register would be spilled
in a branch such that the VGPR defined for spilling did not dominate
all the uses when restoring.
This fixes a crash in an ocl conformance test. The test requries
register spilling and is too big to include.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216217 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a crash in an ocl conformance test. The test requries
register spilling and is too big to include.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216216 91177308-0d34-0410-b5e6-96231b3b80d8
Ordinarily (shl (add x, c1), c2) -> (add (shl x, c2), c1 << c2)
is only done if the add has one use. If the resulting constant
add can be folded into an addressing mode, force this to happen
for the pointer operand.
This ends up happening a lot because of how LDS objects are allocated.
Since the globals are allocated next to each other, acessing the first
element of the second object is directly indexed by a shifted pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215739 91177308-0d34-0410-b5e6-96231b3b80d8
The default assumes that a 16-bit signed offset is used.
LDS instruction use a 16-bit unsigned offset, so it wasn't
being used in some cases where it was assumed a negative offset
could be used.
More should be done here, but first isLegalAddressingMode needs
to gain an addressing mode argument. For now, copy most of the rest
of the default implementation with the immediate offset change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215732 91177308-0d34-0410-b5e6-96231b3b80d8
This for some reason fixes v1i64 kernel arguments on pre-SI. This
currently breaks some other cases in the kernel-args.ll test for R600,
but I'm not particularly confident in the new output. VTX_READ_* are not
used for some of the scalarized cases, and the code reading from the
constant buffer doesn't make much sense to me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215564 91177308-0d34-0410-b5e6-96231b3b80d8
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215558 91177308-0d34-0410-b5e6-96231b3b80d8
v2: drop enum keyword
use correct extension mode
don't bother computing the sign in unsinged case
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215462 91177308-0d34-0410-b5e6-96231b3b80d8
v2: add tests
rename LowerSDIV24 to LowerSDIVREM24
handle the rem part in this function
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215460 91177308-0d34-0410-b5e6-96231b3b80d8
