stack alignment right when it is. This is not
ideal but conservatively correct. Adjust a test
to compensate for changed stack offset value.
gcc.apple/asm-block-57.c
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76120 91177308-0d34-0410-b5e6-96231b3b80d8
The inline asm operands must be parsed from the first flag, you cannot assume
that an immediate operand preceeding a register use operand is the flag.
PowerPC "m" operands are represented as (flag, imm, reg) triples.
isRegTiedToDefOperand() would incorrectly interpret the imm as the flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76101 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid remat'ing instructions whose def have sub-register indices for now. It's just really really hard to get all the cases right.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75900 91177308-0d34-0410-b5e6-96231b3b80d8
operands; it's possible to end up with a constant-foldable operand to
most instructions, even those which can't trap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75845 91177308-0d34-0410-b5e6-96231b3b80d8
symbols were not getting stubs. While I'm at it, add a big testcase for
stub generation to make sure I don't break anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75737 91177308-0d34-0410-b5e6-96231b3b80d8
using horrible string hacking. This gives us a different label,
but it's just an assembler temporary, so the name doesn't matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75733 91177308-0d34-0410-b5e6-96231b3b80d8
the operands have pointer type, so that the resulting type matches
the original SCEV type, and so that unnecessary ptrtoints are
avoided in common cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75680 91177308-0d34-0410-b5e6-96231b3b80d8
For now this only computes the allocated size of the memory pointed to by a
pointer, and offset a pointer from allocated pointer.
The actual checkLimits part will come later, after another round of review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75657 91177308-0d34-0410-b5e6-96231b3b80d8
additional bug fixes:
1. The bug that everyone hit was a problem in the asmprinter where it
would remove $stub but keep the L prefix on a name when emitting the
indirect symbol. This is easy to fix by keeping the name of the stub
and the name of the symbol in a StringMap instead of just keeping a
StringSet and trying to reconstruct it late.
2. There was a problem printing the personality function. The current
logic to print out the personality function from the DWARF information
is a bit of a cesspool right now that duplicates a bunch of other
logic in the asm printer. The short version of it is that it depends
on emitting both the L and _ prefix for symbols (at least on darwin)
and until I can untangle it, it is best to switch the mangler back to
emitting both prefixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75646 91177308-0d34-0410-b5e6-96231b3b80d8
unbreaking llvm-gcc (on Darwin).
--- Reverse-merging r75620 into '.':
U include/llvm/Support/Mangler.h
--- Reverse-merging r75610 into '.':
U test/CodeGen/X86/loop-hoist.ll
G include/llvm/Support/Mangler.h
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U lib/VMCore/Mangler.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75636 91177308-0d34-0410-b5e6-96231b3b80d8
to symbols instead of doing it with "printSuffixedName". This gets us to the point
where there is a real separation between computing a symbol name and printing it,
something I need for MC printer stuff.
This patch also fixes a corner case bug where unnamed private globals wouldn't get
the private label prefix.
Next up, rename all uses of getValueName -> getMangledName for better greppability,
and then tackle the ppc/arm backends to eliminate "printSuffixedName".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75610 91177308-0d34-0410-b5e6-96231b3b80d8
indicates whether the label is private or not, instead of taking
prefix stuff. One effect of this is that symbols will be generated
with *just* the private prefix, instead of both the private prefix
*and* the user-label-prefix, but this doesn't matter as long as it
is consistent. For example we'll now get "Lfoo" instead of "L_foo".
These are just assembler temporary labels anyway, so they never even
make it into the .o file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75607 91177308-0d34-0410-b5e6-96231b3b80d8
1) unique globals with the existing "Count" local in Mangler, not with
atomic nonsense. Using atomics will give us nondeterminstic output
from the compiler when using multiple threads, which is bad.
2) Do not mangle an unknown global name with a type suffix. We don't
need this anymore now that llvm ir doesn't have type planes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75541 91177308-0d34-0410-b5e6-96231b3b80d8
(I think it's reasonably clear that we want to have a canonical form for
constructs like this; if anyone thinks that a select is not the best
canonical form, please tell me.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75531 91177308-0d34-0410-b5e6-96231b3b80d8
check for avoiding re-analyzing a widening cast needed to happen
earlier, as getSCEV itself may result in a isLoopGuardedByCond query.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75511 91177308-0d34-0410-b5e6-96231b3b80d8
so that all code paths get it. PR4256 was about a case where the
phi translation loop would find all preds in the Visited cache, so
it could get by without re-sorting the NonLocalPointerDeps cache.
Fix this by resorting it earlier, there is no reason not to do this.
This patch inspired by Jakub Staszak's patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75476 91177308-0d34-0410-b5e6-96231b3b80d8
of lea. It is better for code size (and presumably efficiency) to use:
movl $foo, %eax
rather than:
leal foo, eax
Both give a nice zero extending "move immediate" instruction, the former is just
smaller. Note that global addresses should be handled different by the x86
backend, but I chose to follow the style already in place and add more fixme's.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75403 91177308-0d34-0410-b5e6-96231b3b80d8
Basically, using:
lea symbol(%rip), %rax
is not valid in -static mode, because the current RIP may not be
within 32-bits of "symbol" when an app is built partially pic and
partially static. The fix for this is to compile it to:
lea symbol, %rax
It would be better to codegen this as:
movq $symbol, %rax
but that will come next.
The hard part of fixing this bug was fixing abi-isel, which was actively
testing for the wrong behavior. Also, the RUN lines are completely impossible
to understand what they are testing. To help with this, convert the -static
x86-64 codegen tests to use filecheck. This is much more stable and makes it
more clear what the codegen is expected to be.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75382 91177308-0d34-0410-b5e6-96231b3b80d8
A side-effect of this change is asm printer is now using unified assembly. There are some minor clean ups and fixes as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75359 91177308-0d34-0410-b5e6-96231b3b80d8
of loops. Add several new functions to for working with ScalarEvolution's
add-hoc value-range analysis functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75252 91177308-0d34-0410-b5e6-96231b3b80d8
value. Adjust other code to deal with that correctly. Make
DAGTypeLegalizer::PromoteIntRes_EXTRACT_VECTOR_ELT take advantage of
this new flexibility to simplify the code and make it deal with unusual
vectors (like <4 x i1>) correctly. Fixes PR3037.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75176 91177308-0d34-0410-b5e6-96231b3b80d8
registers based on dynamic conditions. For example, X86 EBP/RBP, when used as
frame register has to be spilled in the first fixed object. It should inform
PEI this so it doesn't get allocated another stack object. Also, it should not
be spilled as other callee-saved registers but rather its spilling and restoring
are being handled by emitPrologue and emitEpilogue. Avoid spilling it twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75116 91177308-0d34-0410-b5e6-96231b3b80d8
as an (index,bool) pair. The bool flag records whether the kill is a
PHI kill or not. This code will be used to enable splitting of live
intervals containing PHI-kills.
A slight change to live interval weights introduced an extra spill
into lsr-code-insertion (outside the critical sections). The test
condition has been updated to reflect this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75097 91177308-0d34-0410-b5e6-96231b3b80d8
* remove some old code that was needed when we'd put ESP in the scale instead of
the base of some instructions.
* Fix a bug with the P modifier in inline asm that caused us to drop it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75077 91177308-0d34-0410-b5e6-96231b3b80d8
VSETCC must define all bits, which is different than it was documented
to before. Since all targets that implement VSETCC already have this
behavior, and we don't optimize based on this, just change the
documentation. We now get nice code for vec_compare.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74978 91177308-0d34-0410-b5e6-96231b3b80d8
finishes off enough support for vector compares to get the icmp/fcmp
version of 2008-07-23-VSetCC.ll passing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74961 91177308-0d34-0410-b5e6-96231b3b80d8
than a wider one, before trying to compare their contents which will crash
if their sizes are different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74792 91177308-0d34-0410-b5e6-96231b3b80d8
we could do this, doing so requires adjusting the demanded mask and the code isn't
doing that yet. This fixes PR4495
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74699 91177308-0d34-0410-b5e6-96231b3b80d8
Note, isUndef marker must be placed even on implicit_def def operand or else the scavenger will not ignore it. This is necessary because -O0 path does not use liveintervalanalysis, it treats implicit_def just like any other def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74601 91177308-0d34-0410-b5e6-96231b3b80d8
allowed to be undefined when the expression is seen, we cannot enforce the
same-section requirement until the entire assembly file has been seen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74565 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid unnecessary duplication of operand 0 of X86::FpSET_ST0_80. This duplication would
cause one register to remain on the stack at the function return.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74534 91177308-0d34-0410-b5e6-96231b3b80d8
The register allocator, when it allocates a register to a virtual register defined by an implicit_def, can allocate any physical register without worrying about overlapping live ranges. It should mark all of operands of the said virtual register so later passes will do the right thing.
This is not the best solution. But it should be a lot less fragile to having the scavenger try to track what is defined by implicit_def.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74518 91177308-0d34-0410-b5e6-96231b3b80d8
an individual exhaustive evaluation reflects only the exit value
implied by an individual exit, which may differ from the actual
exit value of the loop if there are other exits. This fixes PR4477.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74447 91177308-0d34-0410-b5e6-96231b3b80d8
Not sure I understand how the temp register gets used,
but this fixes a bug and introduces no regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74446 91177308-0d34-0410-b5e6-96231b3b80d8
After much back and forth, I decided to deviate from ARM design and split LDR into 4 instructions (r + imm12, r + imm8, r + r << imm12, constantpool). The advantage of this is 1) it follows the latest ARM technical manual, and 2) makes it easier to reduce the width of the instruction later. The down side is this creates more inconsistency between the two sub-targets. We should split ARM LDR instruction in a similar fashion later. I've added a README entry for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74420 91177308-0d34-0410-b5e6-96231b3b80d8
when one of them can be converted to a trivial icmp and conditional
branch.
This addresses what is essentially a phase ordering problem.
SimplifyCFG knows how to do this transformation, but it doesn't do so
if the primary block has any instructions in it other than an icmp and
a branch. In the given testcase, the block contains other instructions,
however they are loop-invariant and can be hoisted. SimplifyCFG doesn't
have LoopInfo though, so it can't hoist them. And, it's important that
the blocks be merged before LoopRotation, as it doesn't support
multiple-exit loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74396 91177308-0d34-0410-b5e6-96231b3b80d8
inserted to replace that value must dominate all of of the basic
blocks associated with the uses of the value in the PHI, not just
one of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74376 91177308-0d34-0410-b5e6-96231b3b80d8
implementation primarily differs from the former in that the asmprinter
doesn't make a zillion decisions about whether or not something will be
RIP relative or not. Instead, those decisions are made by isel lowering
and propagated through to the asm printer. To achieve this, we:
1. Represent RIP relative addresses by setting the base of the X86 addr
mode to X86::RIP.
2. When ISel Lowering decides that it is safe to use RIP, it lowers to
X86ISD::WrapperRIP. When it is unsafe to use RIP, it lowers to
X86ISD::Wrapper as before.
3. This removes isRIPRel from X86ISelAddressMode, representing it with
a basereg of RIP instead.
4. The addressing mode matching logic in isel is greatly simplified.
5. The asmprinter is greatly simplified, notably the "NotRIPRel" predicate
passed through various printoperand routines is gone now.
6. The various symbol printing routines in asmprinter now no longer infer
when to emit (%rip), they just print the symbol.
I think this is a big improvement over the previous situation. It does have
two small caveats though: 1. I implemented a horrible "no-rip" modifier for
the inline asm "P" constraint modifier. This is a short term hack, there is
a much better, but more involved, solution. 2. I had to xfail an
-aggressive-remat testcase because it isn't handling the use of RIP in the
constant-pool reading instruction. This specific test is easy to fix without
-aggressive-remat, which I intend to do next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74372 91177308-0d34-0410-b5e6-96231b3b80d8
Also, added a pattern for the thumb-2 MOV of shifted immediate since that can encode immediates not encodable by the 16-bit immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74288 91177308-0d34-0410-b5e6-96231b3b80d8
test suite. Remove documentation for --with-f2c, which
is no longer supported. Remove information about obtaining
tcl/expect, which ship with Mac OS X by default since
10.4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74271 91177308-0d34-0410-b5e6-96231b3b80d8
- Includes some DG tests in test/MC/AsmParser, which are rather primitive since
we don't have a -verify mode yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74139 91177308-0d34-0410-b5e6-96231b3b80d8
computations in loops with multiple exits.
Adjust the testcase for PR4436 so that the relevant portion isn't
optimized away.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74073 91177308-0d34-0410-b5e6-96231b3b80d8
terminator, instead of after the last phi. This fixes a bug
exposed by ScalarEvolution analyzing more kinds of loops.
This fixes PR4436.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74072 91177308-0d34-0410-b5e6-96231b3b80d8
trip counts in more cases.
Generalize ScalarEvolution's isLoopGuardedByCond code to recognize
And and Or conditions, splitting the code out into an
isNecessaryCond helper function so that it can evaluate Ands and Ors
recursively, and make SCEVExpander be much more aggressive about
hoisting instructions out of loops.
test/CodeGen/X86/pr3495.ll has an additional instruction now, but
it appears to be due to an arbitrary register allocation difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74048 91177308-0d34-0410-b5e6-96231b3b80d8
generating LLVM IR; it is correct in the code as written
to use 8-byte-aligned operations to copy Key in bar. Formerly
the gcc inliner was run, now it isn't. I don't think it's
possible to preserve this as a pure FE test. Adding -O2 lets
the llvm optimizers get rid of the 8-byte-aligned stores, at least.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73981 91177308-0d34-0410-b5e6-96231b3b80d8
generated code was apparently doing stores directly into the return value
aggregate; now, it's doing a copy from a compiler-generated static object.
That object is initialized using [4 x i8] which breaks the test. I believe
this change preserves the original point of the test.
Of course it would be better for the code to do stores directly into the
return aggregate, but that is not what happens at -O0; the llvm optimizers
seem to do that on x86 but not on ppc32, possibly because of the explicit
padding (which is unavoidable). I think it must have been being done by
a gcc optimizer pass before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73972 91177308-0d34-0410-b5e6-96231b3b80d8
std::pair<double, float*>
is 16 bytes on darwin-powerpc, but not always.
See testcase for full weirdness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73874 91177308-0d34-0410-b5e6-96231b3b80d8
blocks, and also exit blocks with multiple conditions (combined
with (bitwise) ands and ors). It's often infeasible to compute an
exact trip count in such cases, but a useful upper bound can often
be found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73866 91177308-0d34-0410-b5e6-96231b3b80d8
a global with that gets printed with the :mem modifier. All operands to lea's
should be handled with the lea32mem operand kind, and this allows the TLS stuff
to do this. There are several better ways to do this, but I went for the minimal
change since I can't really test this (beyond make check).
This also makes the use of EBX explicit in the operand list in the 32-bit,
instead of implicit in the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73834 91177308-0d34-0410-b5e6-96231b3b80d8
SCEVUnknowns with identical Instructions to be equal. This allows
it to analze cases such as the attached testcase, where the front-end
has cloned the loop controlling expression. Along with r73805, this
lets IndVarSimplify eliminate all the sign-extend casts in the
loop in the attached testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73807 91177308-0d34-0410-b5e6-96231b3b80d8
expression in IVUsers, because in the case of a use of a non-linear
addrec outside of a loop, this causes the addrec to be evaluated as
a linear addrec.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73774 91177308-0d34-0410-b5e6-96231b3b80d8
as if they were multiple uses of the same instruction. This interacts
well with the existing loadpre that j-t does to open up many new jump
threads earlier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73768 91177308-0d34-0410-b5e6-96231b3b80d8
while experimenting. I'm reasonably sure this is correct, but please
tell me if these instructions have some strange property which makes this
change unsafe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73746 91177308-0d34-0410-b5e6-96231b3b80d8
as signed max tests. Along with r73717, this helps CodeGen avoid
emitting code for a maximum operation for this class of loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73718 91177308-0d34-0410-b5e6-96231b3b80d8
casted induction variables in cases where the cast
isn't foldable. It ended up being a pessimization in
many cases. This could be fixed, but it would require
a bunch of complicated code in IVUsers' clients. The
advantages of this approach aren't visible enough to
justify it at this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73706 91177308-0d34-0410-b5e6-96231b3b80d8
If C is a single bit and the and gets analyzed as a truncate and
zero-extend, the xor can be represnted as an add.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73664 91177308-0d34-0410-b5e6-96231b3b80d8
move loads back past a check that the load address
is valid, see new testcase. The test that went
in with 72661 has exactly this case, except that
the conditional it's moving past is checking
something else; I've settled for changing that
test to reference a global, not a pointer. It
may be possible to scan all the tests you pass and
make sure none of them are checking any component
of the address, but it's not trivial and I'm not
trying to do that here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73632 91177308-0d34-0410-b5e6-96231b3b80d8
that gets recognized with a SCEVZeroExtendExpr must be an And
with a low-bits mask. With r73540, this is no longer the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73594 91177308-0d34-0410-b5e6-96231b3b80d8
obscuring what would otherwise be a low-bits mask. Use ComputeMaskedBits
to compute what ShrinkDemandedConstant knew about to reconstruct a
low-bits mask value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73540 91177308-0d34-0410-b5e6-96231b3b80d8
(this is the case when we have thumb vararg function with single
callee-saved register, which is handled separately).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73529 91177308-0d34-0410-b5e6-96231b3b80d8
TurnCopyIntoImpDef turns a copy into implicit_def and remove the val# defined by it. This causes an scavenger assertion later if the def reaches other blocks. Disable the transformation if the value live interval extends beyond its def block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73478 91177308-0d34-0410-b5e6-96231b3b80d8
support for x86, and UMULO/SMULO for many architectures, including PPC
(PR4201), ARM, and Cell. The resulting expansion isn't perfect, but it's
not bad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73477 91177308-0d34-0410-b5e6-96231b3b80d8
failures.
To support this, add some utility functions to Type to help support
vector/scalar-independent code. Change ConstantInt::get and
ConstantFP::get to support vector types, and add an overload to
ConstantInt::get that uses a static IntegerType type, for
convenience.
Introduce a new getConstant method for ScalarEvolution, to simplify
common use cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73431 91177308-0d34-0410-b5e6-96231b3b80d8
problem addressed in 31284, but the patch there only
addressed the case where an invoke is the first thing in
a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73416 91177308-0d34-0410-b5e6-96231b3b80d8
incomming chain of the RETURN node. The incomming chain must
be the outgoing chain of the CALL node. This causes the
backend to identify tail calls that are not tail calls. This
patch fixes this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73387 91177308-0d34-0410-b5e6-96231b3b80d8
- Change register allocation hint to a pair of unsigned integers. The hint type is zero (which means prefer the register specified as second part of the pair) or entirely target dependent.
- Allow targets to specify alternative register allocation orders based on allocation hint.
Part 2.
- Use the register allocation hint system to implement more aggressive load / store multiple formation.
- Aggressively form LDRD / STRD. These are formed *before* register allocation. It has to be done this way to shorten live interval of base and offset registers. e.g.
v1025 = LDR v1024, 0
v1026 = LDR v1024, 0
=>
v1025,v1026 = LDRD v1024, 0
If this transformation isn't done before allocation, v1024 will overlap v1025 which means it more difficult to allocate a register pair.
- Even with the register allocation hint, it may not be possible to get the desired allocation. In that case, the post-allocation load / store multiple pass must fix the ldrd / strd instructions. They can either become ldm / stm instructions or back to a pair of ldr / str instructions.
This is work in progress, not yet enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73381 91177308-0d34-0410-b5e6-96231b3b80d8
they contain multiplications of constants with add operations.
This helps simplify several kinds of things; in particular it
helps simplify expressions like ((-1 * (%a + %b)) + %a) to %b,
as expressions like this often come up in loop trip count
computations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73361 91177308-0d34-0410-b5e6-96231b3b80d8
induction variable when the addrec to be expanded does not require
a wider type. This eliminates the need for IndVarSimplify to
micro-manage SCEV expansions, because SCEVExpander now
automatically expands them in the form that IndVarSimplify considers
to be canonical. (LSR still micro-manages its SCEV expansions,
because it's optimizing for the target, rather than for
other optimizations.)
Also, this uses the new getAnyExtendExpr, which has more clever
expression simplification logic than the IndVarSimplify code it
replaces, and this cleans up some ugly expansions in code such as
the included masked-iv.ll testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73294 91177308-0d34-0410-b5e6-96231b3b80d8
consecutive addresses togther. This makes it easier for the post-allocation pass
to form ldm / stm.
This is step 1. We are still missing a lot of ldm / stm opportunities because
of register allocation are not done in the desired order. More enhancements
coming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73291 91177308-0d34-0410-b5e6-96231b3b80d8
of the target's pointer size. This avoids the need for -m32 on
the llvm-gcc command-line, which some targets may not support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73270 91177308-0d34-0410-b5e6-96231b3b80d8
out of sync with regular cc.
The only difference between the tail call cc and the normal
cc was that one parameter register - R9 - was reserved for
calling functions through a function pointer. After time the
tail call cc has gotten out of sync with the regular cc.
We can use R11 which is also caller saved but not used as
parameter register for potential function pointers and
remove the special tail call cc on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73233 91177308-0d34-0410-b5e6-96231b3b80d8
either one call the other since either one can be replaced at link time, and
they need to be independent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73225 91177308-0d34-0410-b5e6-96231b3b80d8
other operators. For the rare cases where a list type cannot be
deduced, provide a []<type> syntax, where <type> is the list element
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73078 91177308-0d34-0410-b5e6-96231b3b80d8
on x86 to handle more cases. Fix a bug in said code that would cause it
to read past the end of an object. Rewrite the code in
SelectionDAGLegalize::ExpandBUILD_VECTOR to be a bit more general.
Remove PerformBuildVectorCombine, which is no longer necessary with
these changes. In addition to simplifying the code, with this change,
we can now catch a few more cases of consecutive loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73012 91177308-0d34-0410-b5e6-96231b3b80d8
nodes for vectors with an i16 element type. Add an optimization for
building a vector which is all zeros/undef except for the bottom
element, where the bottom element is an i8 or i16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72988 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove NoImplicitFloat target option.
Update llc to set this attribute when -no-implicit-float command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72959 91177308-0d34-0410-b5e6-96231b3b80d8
build vectors with i64 elements will only appear on 32b x86 before legalize.
Since vector widening occurs during legalize, and produces i64 build_vector
elements, the dag combiner is never run on these before legalize splits them
into 32b elements.
Teach the build_vector dag combine in x86 back end to recognize consecutive
loads producing the low part of the vector.
Convert the two uses of TLI's consecutive load recognizer to pass LoadSDNodes
since that was required implicitly.
Add a testcase for the transform.
Old:
subl $28, %esp
movl 32(%esp), %eax
movl 4(%eax), %ecx
movl %ecx, 4(%esp)
movl (%eax), %eax
movl %eax, (%esp)
movaps (%esp), %xmm0
pmovzxwd %xmm0, %xmm0
movl 36(%esp), %eax
movaps %xmm0, (%eax)
addl $28, %esp
ret
New:
movl 4(%esp), %eax
pmovzxwd (%eax), %xmm0
movl 8(%esp), %eax
movaps %xmm0, (%eax)
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72957 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove DisableRedZone target option.
Update llc to set this attribute when -disable-red-zone command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72894 91177308-0d34-0410-b5e6-96231b3b80d8
relocation model on x86-64. Higher level logic should override
the relocation model to PIC on x86_64-apple-darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72746 91177308-0d34-0410-b5e6-96231b3b80d8
RewriteStoreUserOfWholeAlloca deal with tail padding because
isSafeUseOfBitCastedAllocation expects them to. Otherwise, we crash
trying to erase the bitcast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72688 91177308-0d34-0410-b5e6-96231b3b80d8
e.g.
orl $65536, 8(%rax)
=>
orb $1, 10(%rax)
Since narrowing is not always a win, e.g. i32 -> i16 is a loss on x86, dag combiner consults with the target before performing the optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72507 91177308-0d34-0410-b5e6-96231b3b80d8
rewrite the comparison if there is any implicit extension or truncation
on the induction variable. I'm planning for IVUsers to eventually take
over some of the work of this code, and for it to be generalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72496 91177308-0d34-0410-b5e6-96231b3b80d8
possible. For example, it now emits
%p.2.ip.1 = getelementptr [3 x [3 x double]]* %p, i64 2, i64 %tmp, i64 1
instead of the equivalent but less obvious
%p.2.ip.1 = getelementptr [3 x [3 x double]]* %p, i64 0, i64 %tmp, i64 19
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72452 91177308-0d34-0410-b5e6-96231b3b80d8
beyond their associated static array type.
I believe that this fixes a legitimate bug, because BasicAliasAnalysis
already has code to check for this condition that works for non-constant
indices, however it was missing the case of constant indices. With this
change, it checks for both.
This fixes PR4267, and miscompiles of SPEC 188.ammp and 464.h264.href.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72451 91177308-0d34-0410-b5e6-96231b3b80d8
division operation, don't attempt to use the operation's value as
the base of a getelementptr. This fixes PR4271.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72422 91177308-0d34-0410-b5e6-96231b3b80d8
low-level alias() method, allowing it to reason more aggressively
about pointers into constant memory. PR4189
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72403 91177308-0d34-0410-b5e6-96231b3b80d8
leave the original comparison in place if it has other uses, since the
other uses won't be dominated by the new comparison instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72369 91177308-0d34-0410-b5e6-96231b3b80d8
sending SCEVUnknowns to expandAddToGEP. This avoids the need for
expandAddToGEP to bend the rules and peek into SCEVUnknown
expressions.
Factor out the code for testing whether a SCEV can be factored by
a constant for use in a GEP index. This allows it to handle
SCEVAddRecExprs, by recursing.
As a result, SCEVExpander can now put more things in GEP indices,
so it emits fewer explicit mul instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72366 91177308-0d34-0410-b5e6-96231b3b80d8
Fix by clearing the rewriter cache before deleting the trivially dead
instructions.
Also make InsertedExpressions use an AssertingVH to catch these
bugs easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72364 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombiner created a negative shiftamount, stored in an
unsigned variable. Later the optimizer eliminated the shift entirely as being
undefined.
Example: (srl (shl X, 56) 48). ShiftAmt is 4294967288.
Fix it by checking that the shiftamount is positive, and storing in a signed
variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72331 91177308-0d34-0410-b5e6-96231b3b80d8
and it wasn't generating calls through @PLT for these functions.
hasLocalLinkage() is now false for available_externally,
I attempted to fix the inliner and dce to handle available_externally properly.
It passed make check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72328 91177308-0d34-0410-b5e6-96231b3b80d8
code in preparation for code generation. The main thing it does
is handle the case when eh.exception calls (and, in a future
patch, eh.selector calls) are far away from landing pads. Right
now in practice you only find eh.exception calls close to landing
pads: either in a landing pad (the common case) or in a landing
pad successor, due to loop passes shifting them about. However
future exception handling improvements will result in calls far
from landing pads:
(1) Inlining of rewinds. Consider the following case:
In function @f:
...
invoke @g to label %normal unwind label %unwinds
...
unwinds:
%ex = call i8* @llvm.eh.exception()
...
In function @g:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
"rethrow exception"
Now inline @g into @f. Currently this is turned into:
In function @f:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
invoke "rethrow exception" to label %normal unwind label %unwinds
unwinds:
%ex = call i8* @llvm.eh.exception()
...
However we would like to simplify invoke of "rethrow exception" into
a branch to the %unwinds label. Then %unwinds is no longer a landing
pad, and the eh.exception call there is then far away from any landing
pads.
(2) Using the unwind instruction for cleanups.
It would be nice to have codegen handle the following case:
invoke @something to label %continue unwind label %run_cleanups
...
handler:
... perform cleanups ...
unwind
This requires turning "unwind" into a library call, which
necessarily takes a pointer to the exception as an argument
(this patch also does this unwind lowering). But that means
you are using eh.exception again far from a landing pad.
(3) Bugpoint simplifications. When bugpoint is simplifying
exception handling code it often generates eh.exception calls
far from a landing pad, which then causes codegen to assert.
Bugpoint then latches on to this assertion and loses sight
of the original problem.
Note that it is currently rare for this pass to actually do
anything. And in fact it normally shouldn't do anything at
all given the code coming out of llvm-gcc! But it does fire
a few times in the testsuite. As far as I can see this is
almost always due to the LoopStrengthReduce codegen pass
introducing pointless loop preheader blocks which are landing
pads and only contain a branch to another block. This other
block contains an eh.exception call. So probably by tweaking
LoopStrengthReduce a bit this can be avoided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72276 91177308-0d34-0410-b5e6-96231b3b80d8
assuming that the use of the value is in a block dominated by the
"normal" destination. LangRef.html and other documentation sources
don't explicitly guarantee this, but it seems to be assumed in
other places in LLVM at least.
This fixes an assertion failure on the included testcase, which
is derived from the Ada testsuite.
FixUsesBeforeDefs is a temporary measure which I'm looking to
replace with a more capable solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72266 91177308-0d34-0410-b5e6-96231b3b80d8
use in expanding SCEVAddExprs with GEPs. The operands of a
SCEVMulExpr need to be multiplied together, not added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72250 91177308-0d34-0410-b5e6-96231b3b80d8
This only rejects mismatches between target specific calling convention
and C/LLVM specific calling convention.
There are too many fastcc/C, coldcc/cc42 mismatches in the testsuite, these are
not reject by the verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72248 91177308-0d34-0410-b5e6-96231b3b80d8
Instcombine to be more aggressive about using SimplifyDemandedBits
on shift nodes. This allows a shift to be simplified to zero in the
included test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72204 91177308-0d34-0410-b5e6-96231b3b80d8
build an integer and cast that to a float. This fixes a crash
caused by trying to split an f32 into two f16's.
This changes the behavior in test/CodeGen/XCore/fneg.ll because that
testcase now triggers a DAGCombine which converts the fneg into an integer
operation. If someone is interested, it's probably possible to tweak
the test to generate an actual fneg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72162 91177308-0d34-0410-b5e6-96231b3b80d8
of the comparison is defined inside the loop. This fixes a
use-before-def problem, because the transformation puts a use
of the RHS outside the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72149 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72093 91177308-0d34-0410-b5e6-96231b3b80d8
When a test fails with more than a pipeful of output on stdout AND stderr, one
of the DejaGnu programs blocks. The problem can be avoided by redirecting
stdout to a file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71919 91177308-0d34-0410-b5e6-96231b3b80d8
Use it on dags and lists like this:
class decls {
string name;
}
def Decls : decls;
class B<list<string> names> : A<!foreach(Decls.name, names, !strconcat(Decls.name, ", Sr."))>;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71803 91177308-0d34-0410-b5e6-96231b3b80d8
belonged. The variable declaration stuff wasn't happy with it where it
was. Sorry that the testcase is so big. Bugpoint wasn't able to reduce it
successfully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71714 91177308-0d34-0410-b5e6-96231b3b80d8