This patch fixes the following two tests which have been failing on
llvm-mips-linux builder since r178403:
LLVM :: Analysis/Profiling/load-branch-weights-ifs.ll
LLVM :: Analysis/Profiling/load-branch-weights-loops.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178584 91177308-0d34-0410-b5e6-96231b3b80d8
qualifiers.
This patch only adds support for parsing these identifiers in the
X86AsmParser. The front-end interface isn't capable of looking up
these identifiers at this point in time. The end result is the
compiler now errors during object file emission, rather than at
parse time. Test case coming shortly.
Part of rdar://13499009 and PR13340
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178566 91177308-0d34-0410-b5e6-96231b3b80d8
When doing a partword atomic operation, a lwarx was being paired with
a stdcx. instead of a stwcx. when compiling for a 64-bit target. The
target has nothing to do with it in this case; we always need a stwcx.
Thanks to Kai Nacke for reporting the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178559 91177308-0d34-0410-b5e6-96231b3b80d8
The new instruction scheduling models provide information about the
number of cycles consumed on each processor resource. This makes it
possible to estimate ILP more accurately than simply counting
instructions / issue width.
The functions getResourceDepth() and getResourceLength() now identify
the limiting processor resource, and return a cycle count based on that.
This gives more precise resource information, particularly in traces
that use one resource a lot more than others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178553 91177308-0d34-0410-b5e6-96231b3b80d8
This is helps on architectures where i8,i16 are not legal but we have byte, and
short loads/stores. Allowing us to merge copies like the one below on ARM.
copy(char *a, char *b, int n) {
do {
int t0 = a[0];
int t1 = a[1];
b[0] = t0;
b[1] = t1;
radar://13536387
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178546 91177308-0d34-0410-b5e6-96231b3b80d8
The iterator could be invalidated when it's recursively deleting a whole bunch
of constant expressions in a constant initializer.
Note: This was only reproducible if `opt' was run on a `.bc' file. If `opt' was
run on a `.ll' file, it wouldn't crash. This is why the test first pushes the
`.ll' file through `llvm-as' before feeding it to `opt'.
PR15440
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178531 91177308-0d34-0410-b5e6-96231b3b80d8
SPARC v9 extends all ALU instructions to 64 bits, so we simply need to
add patterns to use them for both i32 and i64 values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178527 91177308-0d34-0410-b5e6-96231b3b80d8
The last resort pattern produces 6 instructions, and there are still
opportunities for materializing some immediates in fewer instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178526 91177308-0d34-0410-b5e6-96231b3b80d8
SPARC v9 defines new 64-bit shift instructions. The 32-bit shift right
instructions are still usable as zero and sign extensions.
This adds new F3_Sr and F3_Si instruction formats that probably should
be used for the 32-bit shifts as well. They don't really encode an
simm13 field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178525 91177308-0d34-0410-b5e6-96231b3b80d8
The 'sparc' architecture produces 32-bit code while 'sparcv9' produces
64-bit code.
It is also possible to run 32-bit code using SPARC v9 instructions with:
llc -march=sparc -mattr=+v9
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178524 91177308-0d34-0410-b5e6-96231b3b80d8
This is far from complete, but it is enough to make it possible to write
test cases using i64 arguments.
Missing features:
- Floating point arguments.
- Receiving arguments on the stack.
- Calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178523 91177308-0d34-0410-b5e6-96231b3b80d8
We are going to use the same registers for 32-bit and 64-bit values, but
in two different register classes. The I64Regs register class has a
larger spill size and alignment.
The addition of an i64 register class confuses TableGen's type
inference, so it is necessary to clarify the type of some immediates and
the G0 register.
In 64-bit mode, pointers are i64 and should use the I64Regs register
class. Implement getPointerRegClass() to dynamically provide the pointer
register class depending on the subtarget. Use ptr_rc and iPTR for
memory operands.
Finally, add the i64 type to the IntRegs register class. This register
class is not used to hold i64 values, I64Regs is for that. The type is
required to appease TableGen's type checking in output patterns like this:
def : Pat<(add i64:$a, i64:$b), (ADDrr $a, $b)>;
SPARC v9 uses the same ADDrr instruction for i32 and i64 additions, and
TableGen doesn't know to check the type of register sub-classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178522 91177308-0d34-0410-b5e6-96231b3b80d8
Buffered means a later divide may be executed out-of-order while a
prior divide is sitting (buffered) in a reservation station.
You can tell it's not pipelined, because operations that use it
reserve it for more than one cycle:
def : WriteRes<WriteIDiv, [HWPort0, HWDivider]> {
let Latency = 25;
let ResourceCycles = [1, 10];
}
We don't currently distinguish between an unpipeline operation and one
that is split into multiple micro-ops requiring the same unit. Except
that the later may have NumMicroOps > 1 if they also consume
issue/dispatch resources.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178519 91177308-0d34-0410-b5e6-96231b3b80d8
Revision 177141 caused a regression in all but
mips64 little endian. That is because none of the
other Mips targets had test cases checking the
contents of the .eh_frame section. This patch fixes
both the llvm code and adds an assembler test case
to include the current 4 flavors.
The test cases unfortunately rely on llvm-objdump. A
preferable method would be to use a pretty printer output
such as what readelf -wf <elf_file> would give.
I also changed the name of the test case to correct a typo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178506 91177308-0d34-0410-b5e6-96231b3b80d8
We would also like to merge sequences that involve a variable index like in the
example below.
int index = *idx++
int i0 = c[index+0];
int i1 = c[index+1];
b[0] = i0;
b[1] = i1;
By extending the parsing of the base pointer to handle dags that contain a
base, index, and offset we can handle examples like the one above.
The dag for the code above will look something like:
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i8 load %index))))
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i32 add (i32 signextend (i8 load %index))
(i32 1)))))
The code that parses the tree ignores the intermediate sign extensions. However,
if there is a sign extension it needs to be on all indexes.
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (add (i8 load %index)
(i8 1))))
vs
(load (i64 add (i64 copyfromreg %c)
(i64 signextend (i32 add (i32 signextend (i8 load %index))
(i32 1)))))
radar://13536387
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178483 91177308-0d34-0410-b5e6-96231b3b80d8
The P7 and A2 have additional floating-point conversion instructions which
allow a direct two-instruction sequence (plus load/store) to convert from all
combinations (signed/unsigned i32/i64) <--> (float/double) (on previous cores,
only some combinations were directly available).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178480 91177308-0d34-0410-b5e6-96231b3b80d8
The popcntw instruction is available whenever the popcntd instruction is
available, and performs a separate popcnt on the lower and upper 32-bits.
Ignoring the high-order count, this can be used for the 32-bit input case
(saving on the explicit zero extension otherwise required to use popcntd).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178470 91177308-0d34-0410-b5e6-96231b3b80d8
PPCISD::STFIWX is really a memory opcode, and so it should come after
FIRST_TARGET_MEMORY_OPCODE, and we should use DAG.getMemIntrinsicNode to create
nodes using it.
No functionality change intended (although there could be optimization benefits
from preserving the MMO information).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178468 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply r177968:
After commit 178074 we can now have undefined scheduler variants.
Move the CortexA9 resources into the CortexA9 SchedModel namespace. Define
resource mappings under the CortexA9 SchedModel. Define resources and mappings
for the SwiftModel.
Incooperate Andrew's feedback.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178460 91177308-0d34-0410-b5e6-96231b3b80d8
ImmToIdxMap should be a DenseMap (not a std::map) because there
is no ordering requirement. Also, we don't need a separate list
of instructions for noImmForm in eliminateFrameIndex, because this
list is essentially the complement of the keys in ImmToIdxMap.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178450 91177308-0d34-0410-b5e6-96231b3b80d8
This instruction is available on modern PPC64 CPUs, and is now used
to improve the SINT_TO_FP lowering (by eliminating the need for the
separate sign extension instruction and decreasing the amount of
needed stack space).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178446 91177308-0d34-0410-b5e6-96231b3b80d8
The existing SINT_TO_FP code for i32 -> float/double conversion was disabled
because it relied on broken EXTSW_32/STD_32 instruction definitions. The
original intent had been to enable these 64-bit instructions to be used on CPUs
that support them even in 32-bit mode. Unfortunately, this form of lying to
the infrastructure was buggy (as explained in the FIXME comment) and had
therefore been disabled.
This re-enables this functionality, using regular DAG nodes, but only when
compiling in 64-bit mode. The old STD_32/EXTSW_32 definitions (which were dead)
are removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178438 91177308-0d34-0410-b5e6-96231b3b80d8
'@SECREL' is what is used by the Microsoft assembler, but GNU as expects '@SECREL32'.
With the patch, the MC-generated code works fine in combination with a recent GNU as (2.23.51.20120920 here).
Patch by David Nadlinger!
Differential Revision: http://llvm-reviews.chandlerc.com/D429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178427 91177308-0d34-0410-b5e6-96231b3b80d8
specific code paths.
This allows us to write code like:
if (__nvvm_reflect("FOO"))
// Do something
else
// Do something else
and compile into a library, then give "FOO" a value at kernel
compile-time so the check becomes a no-op.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178416 91177308-0d34-0410-b5e6-96231b3b80d8
Hopefully this resolves any outstanding style issues and gives us
an automated way of ensuring we conform to the style guidelines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178415 91177308-0d34-0410-b5e6-96231b3b80d8
Check that instruction selection can select multiply-add/sub DSP instructions
from a pattern that doesn't have intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178406 91177308-0d34-0410-b5e6-96231b3b80d8
derived class MipsSETargetLowering.
We shouldn't be generating madd/msub nodes if target is Mips16, since Mips16
doesn't have support for multipy-add/sub instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178404 91177308-0d34-0410-b5e6-96231b3b80d8
The new instructions have explicit register output operands and use table-gen
patterns instead of C++ code to do instruction selection.
Mips16's instructions are unaffected by this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178403 91177308-0d34-0410-b5e6-96231b3b80d8
callee-saved scan.
The code makes use of register's scavenger's capability to spill multiple
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178391 91177308-0d34-0410-b5e6-96231b3b80d8
clang.arc.used is an interesting call for ARC since ObjCARCContract
needs to run to remove said intrinsic to avoid a linker error (since the
call does not exist).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178369 91177308-0d34-0410-b5e6-96231b3b80d8
die values. A lot of DIEs have 10 attributes in C++ code (example
clang), none had more than 12. Seems like a good default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178366 91177308-0d34-0410-b5e6-96231b3b80d8
Like nearbyint, rint can be implemented on PPC using the frin instruction. The
complication comes from the fact that rint needs to set the FE_INEXACT flag
when the result does not equal the input value (and frin does not do that). As
a result, we use a custom inserter which, after the rounding, compares the
rounded value with the original, and if they differ, explicitly sets the XX bit
in the FPSCR register (which corresponds to FE_INEXACT).
Once LLVM has better modeling of the floating-point environment we should be
able to (often) eliminate this extra complexity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178362 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are available on the P5x (and later) and on the A2. They
implement the standard floating-point rounding operations (floor, trunc, etc.).
One caveat: frin (round to nearest) does not implement "ties to even", and so
is only enabled in fast-math mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178337 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 617330909f.
It broke the bots:
/home/clangbuild2/clang-ppc64-2/llvm.src/unittests/ADT/SmallVectorTest.cpp:150: PushPopTest
/home/clangbuild2/clang-ppc64-2/llvm.src/unittests/ADT/SmallVectorTest.cpp:118: Failure
Value of: v[i].getValue()
Actual: 0
Expected: value
Which is: 2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178334 91177308-0d34-0410-b5e6-96231b3b80d8
Mips assembler supports macros that allows the OR instruction
to have an immediate parameter. This patch adds an instruction
alias that converts this macro into a Mips ORI instruction.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178316 91177308-0d34-0410-b5e6-96231b3b80d8
- RDRAND always clears the destination value when a random value is not
available (i.e. CF == 0). This value is truncated or zero-extended as
the false boolean value to be returned. Boolean simplification needs
to skip this 'zext' or 'trunc' node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178312 91177308-0d34-0410-b5e6-96231b3b80d8
To enable a load of a call address to be folded with that call, this
load is moved from outside of callseq into callseq. Such a moving
adds a non-glued node (that load) into a glued sequence. This non-glue
load is only removed when DAG selection folds them into a memory form
call instruction. When such instruction selection is disabled, it breaks
DAG schedule.
To prevent that, such moving is disabled when target favors register
indirect call.
Previous workaround disabling CALL32m/CALL64m insn selection is removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178308 91177308-0d34-0410-b5e6-96231b3b80d8
immediate in a register. I don't believe this should ever fail, but I see no
harm in trying to make this code bullet proof.
I've added an assert to ensure my assumtion is correct. If the assertion fires
something is wrong and we should fix it, rather then just silently fall back to
SelectionDAG isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178305 91177308-0d34-0410-b5e6-96231b3b80d8
Mips assembler allows following to be used as aliased instructions:
jal $rs for jalr $rs
jal $rd,$rd for jalr $rd,$rs
This patch provides alias definitions in td files and test cases to show the usage.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178304 91177308-0d34-0410-b5e6-96231b3b80d8
Compiling in 32-bit mode on a P7 would assert after 64-bit DAG combines were
added for bswap with load/store. This is because these combines are really only
valid in 64-bit mode, regardless of the CPU (and this was not being checked).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178286 91177308-0d34-0410-b5e6-96231b3b80d8
Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178285 91177308-0d34-0410-b5e6-96231b3b80d8
If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.
Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.
This patch simplifies said code by:
1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).
2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).
This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.
<rdar://problem/13249661>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178284 91177308-0d34-0410-b5e6-96231b3b80d8
This follows up Ulrich Weigand's work in PPCInstrInfo.td and
PPCInstr64Bit.td by doing the corresponding work for most of the
Altivec patterns. I have not been able to do anything for the
following classes of instructions:
(1) Vector logicals. These don't have corresponding intrinsics and
don't have a single obvious vector type. So far as I can tell I need
to leave these as VRRC. Affected instructions are: VAND, VANDC,
VNOR, VOR, VXOR, V_SET0.
(2) Instructions that make use of vector shuffle. The selection code
promotes all shuffles to v16i8, so any pattern that matches on a
shuffle is constrained. I haven't found any way to make the patterns
match on their natural types, so I plan to leave these as VRRC.
Affected instructions are: VMRG*, VSPLTB, VSPLTH, VSPLTW, VPKUHUM,
VPKUWUM.
No change in behavior is anticipated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178277 91177308-0d34-0410-b5e6-96231b3b80d8
These are 64-bit load/store with byte-swap, and available on the P7 and the A2.
Like the similar instructions for 16- and 32-bit words, these are matched in the
target DAG-combine phase against load/store-bswap pairs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178276 91177308-0d34-0410-b5e6-96231b3b80d8
PPC ISA 2.06 (P7, A2, etc.) has a popcntd instruction. Add this instruction and
tell TTI about it so that popcount-loop recognition will know about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178233 91177308-0d34-0410-b5e6-96231b3b80d8
There were a few places where kill flags were not being set correctly, and
where 32-bit instruction variants were being used with 64-bit registers. After
r178180, this code was being triggered causing llc to assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178220 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 342d92c7a0.
Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178215 91177308-0d34-0410-b5e6-96231b3b80d8
form of call in preference to memory indirect on Atom.
In this case, the patch applies the optimization to the code for reloading
spilled registers.
The patch also includes changes to sibcall.ll and movgs.ll, which were
failing on the Atom buildbot after the first patch was applied.
This patch by Sriram Murali.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178193 91177308-0d34-0410-b5e6-96231b3b80d8
These functions should have the same list of load/store instructions. Now that
all load/store forms have been normalized (to single instructions or pseudos)
they can be resynchronized.
Found by inspection, although hopefully this will improve optimization. I've
also added some comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178180 91177308-0d34-0410-b5e6-96231b3b80d8
indirect through a memory address is to load the memory address into
a register and then call indirect through the register.
This patch implements this improvement by modifying SelectionDAG to
force a function address which is a memory reference to be loaded
into a virtual register.
Patch by Sriram Murali.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178171 91177308-0d34-0410-b5e6-96231b3b80d8
This may be causing a failure on some buildbots:
Referencing function in another module!
tail call fastcc void @_ZL11EvaluateOpstPtRj(i16 zeroext %17, i16* %Vals, i32* %NumVals), !dbg !219
Referencing function in another module!
tail call fastcc void @_ZL11EvaluateOpstPtRj(i16 zeroext %19, i16* %Vals, i32* %NumVals), !dbg !221
Broken module found, compilation aborted!
Stack dump:
0. Running pass 'Function Pass Manager' on module 'ld-temp.o'.
1. Running pass 'Module Verifier' on function '@_ZL11EvaluateOpstPtRj'
clang: error: unable to execute command: Illegal instruction: 4
clang: error: linker command failed due to signal (use -v to see invocation)
<rdar://problem/13516485>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178156 91177308-0d34-0410-b5e6-96231b3b80d8
6 more piglit tests.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178145 91177308-0d34-0410-b5e6-96231b3b80d8
It seems that the Darwin PPC assembler requires r0 to be written as 0 when it
means 0 (at least in lwarx/stwcx.). Fixes PR15605.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178142 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to r178073 (which should actually make target-customized
spilling work again).
I still don't have a regression test for this (but it would be good to have
one; Thumb 1 and Mips16 use this callback as well).
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178137 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178127 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178126 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178125 91177308-0d34-0410-b5e6-96231b3b80d8
The R0 register can now be allocated because instructions
that cannot use R0 as a GPR have been appropriately marked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178123 91177308-0d34-0410-b5e6-96231b3b80d8
The register parameter in these instructions becomes the base register in an
r+i ld instruction (and, thus, cannot be r0).
This is not yet testable because we don't yet allocate r0 (and even then any
test would be very fragile).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178121 91177308-0d34-0410-b5e6-96231b3b80d8
Either operand of these pseudo instructions can be transformed into the first
operand of an isel instruction (and this operand cannot be r0).
This is not yet testable because we don't yet allocate r0 (and even when we do,
any test would be very fragile).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178119 91177308-0d34-0410-b5e6-96231b3b80d8
Like the addi/addis instructions themselves, these pseudo instructions also
cannot have r0 as their register parameter (because it will be interpreted as
the value 0).
This is not yet testable because we don't yet allocate r0 (and even when we do,
any regression test would be very fragile because it would depend on the
register allocator heuristics).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178118 91177308-0d34-0410-b5e6-96231b3b80d8
Some implementation detail in the forgotten past required the link
register to be placed in the GPRC and G8RC register classes. This is
just wrong on the face of it, and causes several extra intersection
register classes to be generated. I found this was having evil
effects on instruction scheduling, by causing the wrong register class
to be consulted for register pressure decisions.
No code generation changes are expected, other than some minor changes
in instruction order. Seven tests in the test bucket required minor
tweaks to adjust to the new normal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178114 91177308-0d34-0410-b5e6-96231b3b80d8
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178099 91177308-0d34-0410-b5e6-96231b3b80d8
As Bill Schmidt pointed out to me, only on Darwin do we need to spill/restore
VRSAVE in the SjLj code. For non-Darwin, don't spill/restore VRSAVE (and I've
added some asserts to make sure that we're not).
As it turns out, we're not currently handling the Darwin case correctly (I've
added a FIXME in the test case). I've tried adding various implied register
definitions/uses to force the spill without success, so I'll need to address
this later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178096 91177308-0d34-0410-b5e6-96231b3b80d8
if execution failed. ExecuteAndWait returns -1 upon an execution failure, but
checking the return value isn't sufficient because the wait command may
return -1 as well. This new parameter is to be used by the clang driver in a
subsequent commit.
Part of rdar://13362359
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178087 91177308-0d34-0410-b5e6-96231b3b80d8
If we compile a single source program, the `.gcda' file will be generated where
the program was executed. This isn't desirable, because that place may be at an
unpredictable place (the program could call `chdir' for instance).
Instead, we will output the `.gcda' file in the same place we output the `.gcno'
file. I.e., the directory where the executable was generated. This matches GCC's
behavior.
<rdar://problem/13061072> & PR11809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178084 91177308-0d34-0410-b5e6-96231b3b80d8
All Intel CPUs since Yonah look a lot alike, at least at the granularity
of the scheduling models. We can add more accurate models for
processors that aren't Sandy Bridge if required. Haswell will probably
need its own.
The Atom processor and anything based on NetBurst is completely
different. So are the non-Intel chips.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178080 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to factor out some uses of magic number operand offsets
inside Clang where these fields were updated in an effort to resolve forward
declarations/circular references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178078 91177308-0d34-0410-b5e6-96231b3b80d8
As suggested by Bill Schmidt (in reviewing r178067), use the real register
number bit lengths (which is self-documenting, and prevents using illegal
numbers), and set only the relevant bits in HWEncoding (which defaults to 0).
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178077 91177308-0d34-0410-b5e6-96231b3b80d8
As pointed out by Richard Sandiford, my recent updates to the register
scavenger broke targets that use custom spilling (because the new code assumed
that if there were no valid spill slots, than spilling would be impossible).
I don't have a test case, but it should be possible to create one for Thumb 1,
Mips 16, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178073 91177308-0d34-0410-b5e6-96231b3b80d8
As pointed out by Jakob, we don't need to maintain a separate
register-numbering table. Instead we should let TableGen generate the table for
us from the information (already present) in PPCRegisterInfo.td.
TRI->getEncodingValue is now used to access register-encoding values.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178067 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the register scavenger can support multiple spill slots, and PEI can
use virtual-register-based scavenging for multiple simultaneous registers, we
can use a virtual register for the transfer register in the CR spilling code.
This should eliminate the last place (outside of the prologue/epilogue) where
we depend on the unconditional availability of the r0 register. We will soon be
able to allocate it (in a somewhat restricted sense) as a GPR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178060 91177308-0d34-0410-b5e6-96231b3b80d8
PPC's use of PEI's virtual-register-based scavenging functionality had
redefined the virtual registers (it was non-SSA). Now that PEI supports
dealing with instructions with multiple virtual registers, this can be
cleanup up to use multiple virtual registers and keep SSA form.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178059 91177308-0d34-0410-b5e6-96231b3b80d8
The previous algorithm could not deal properly with scavenging multiple virtual
registers because it kept only one live virtual -> physical mapping (and
iterated through operands in order). Now we don't maintain a current mapping,
but rather use replaceRegWith to completely remove the virtual register as
soon as the mapping is established.
In order to allow the register scavenger to return a physical register killed
by an instruction for definition by that same instruction, we now call
RS->forward(I) prior to eliminating virtual registers defined in I. This
requires a minor update to forward to ignore virtual registers.
These new features will be tested in forthcoming commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178058 91177308-0d34-0410-b5e6-96231b3b80d8
Now all x86 instructions that have itinerary classes also have SchedRW
lists. This is required before the new scheduling models can be used.
There are still unannotated instructions remaining, but they don't have
itinerary classes either.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178051 91177308-0d34-0410-b5e6-96231b3b80d8
This is a compile time optimization. Before the patch we would do two traversals
on each call to aliasGEP - one with a set size parameter one with UnknownSize.
We can do better by first checking the result of the alias query with
UnknownSize.
Only if this one returns MayAlias do we query a second time using size and type.
This recovers an about 7% compile time regression on spec/ammp.
radar://12349960
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178045 91177308-0d34-0410-b5e6-96231b3b80d8
The OptimizeIntToFloatBitCast converts shift-truncate sequences
into extractelement operations. The computation of the element
index to be used in the resulting operation is currently only
correct for little-endian targets.
This commit fixes the element index computation to be correct
for big-endian targets as well. If the target byte order is
unknown, the optimization cannot be performed at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178031 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r177968. It is causing failures in a local build bot.
"fatal error: error in backend: Expected a variant SchedClass"
Original commit message:
Move the CortexA9 resources into the CortexA9 SchedModel namespace. Define
resource mappings under the CortexA9 SchedModel. Define resources and mappings
for the SwiftModel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178028 91177308-0d34-0410-b5e6-96231b3b80d8
Not only fold immediates, but avoid unnecessary copies as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178024 91177308-0d34-0410-b5e6-96231b3b80d8
Just define the address as unknown instead of VReg_32.
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178022 91177308-0d34-0410-b5e6-96231b3b80d8
They read from constant register space anyway.
v2: fix lit tests
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178020 91177308-0d34-0410-b5e6-96231b3b80d8
Just enable WQM when we see an LDS interpolation instruction.
Signed-off-by: Christian König <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178019 91177308-0d34-0410-b5e6-96231b3b80d8
Restore the EXEC mask early, otherwise a copy might end up not beeing executed.
Candidate for the mesa stable branch.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178018 91177308-0d34-0410-b5e6-96231b3b80d8
If PC or SP is the destination, the disassembler erroneously failed with the
invalid encoding, despite the manual saying that both are fine.
This patch addresses failure to decode encoding T4 of LDR (A8.8.62) which is a
postindexed load, where the offset 0xc is applied to SP after the load occurs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178017 91177308-0d34-0410-b5e6-96231b3b80d8
There remain a number of patterns that cannot (and should not)
be handled by the asm parser, in particular all the Pseudo patterns.
This commit marks those patterns as isCodeGenOnly.
No change in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178008 91177308-0d34-0410-b5e6-96231b3b80d8
MCTargetDesc/PPCMCCodeEmitter.cpp current has code like:
if (isSVR4ABI() && is64BitMode())
Fixups.push_back(MCFixup::Create(0, MO.getExpr(),
(MCFixupKind)PPC::fixup_ppc_toc16));
else
Fixups.push_back(MCFixup::Create(0, MO.getExpr(),
(MCFixupKind)PPC::fixup_ppc_lo16));
This is a problem for the asm parser, since it requires knowledge of
the ABI / 64-bit mode to be set up. However, more fundamentally,
at this point we shouldn't make such distinctions anyway; in an assembler
file, it always ought to be possible to e.g. generate TOC relocations even
when the main ABI is one that doesn't use TOC.
Fortunately, this is actually completely unnecessary; that code was added
to decide whether to generate TOC relocations, but that information is in
fact already encoded in the VariantKind of the underlying symbol.
This commit therefore merges those fixup types into one, and then decides
which relocation to use based on the VariantKind.
No changes in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178007 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the the sequence generated to implement long double -> int
conversions, we need to perform an FADD in round-to-zero mode. This is
problematical since the FPSCR is not at all modeled at the SelectionDAG
level, and thus there is a risk of getting floating point instructions
generated out of sequence with the instructions to modify FPSCR.
The current code handles this by somewhat "special" patterns that in part
have dummy operands, and/or duplicate existing instructions, making them
awkward to handle in the asm parser.
This commit changes this by leaving the "FADD in round-to-zero mode"
as an atomic operation on the SelectionDAG level, and only split it up into
real instructions at the MI level (via custom inserter). Since at *this*
level the FPSCR *is* modeled (via the "RM" hard register), much of the
"special" stuff can just go away, and the resulting patterns can be used by
the asm parser.
No significant change in generated code expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178006 91177308-0d34-0410-b5e6-96231b3b80d8
The LDrs pattern is a duplicate of LD, except that it accepts memory
addresses where the displacement is a symbolLo64. An operand type
"memrs" is defined for just that purpose.
However, this wouldn't be necessary if the default "memrix" operand
type were to simply accept 64-bit symbolic addresses directly.
The only problem with that is that it uses "symbolLo", which is
hardcoded to 32-bit.
To fix this, this commit changes "memri" and "memrix" to use new
operand types for the memory displacement, which allow iPTR
instead of i32. This will also make address parsing easier to
implment in the asm parser.
No change in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178005 91177308-0d34-0410-b5e6-96231b3b80d8
The ADDI/ADDI8 patterns are currently duplicated into ADDIL/ADDI8L,
which describe the same instruction, except that they accept a
symbolLo[64] operand instead of a s16imm[64] operand.
This duplication confuses the asm parser, and it actually not really
needed, since symbolLo[64] already accepts immediate operands anyway.
So this commit removes the duplicate patterns.
No change in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178004 91177308-0d34-0410-b5e6-96231b3b80d8
This commit changes the ISEL patterns to use a CCBITRC operand
instead of a "pred" operand. This matches the actual instruction
text more directly, and simplifies use of ISEL with the asm parser.
In addition, this change allows some simplification of handling
the "pred" operand, as this is now only used by BCC.
No change in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178003 91177308-0d34-0410-b5e6-96231b3b80d8
The BLR pattern cannot be recognized by the asm parser in its current form.
This complexity is due to an apparent attempt to enable conditional BLR
variants. However, none of those can ever be generated by current code;
the pattern is only ever created using the default "pred" operand.
To simplify the pattern and allow it to be recognized by the parser,
this commit removes those attempts at conditional BLR support.
When we later come back to actually add real conditional BLR, this
should probably be done via a fully generic conditional branch pattern.
No change in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178002 91177308-0d34-0410-b5e6-96231b3b80d8
In PPCInstr64Bit.td, some branch patterns appear in a different sequence
than the corresponding 32-bit patterns in PPCInstrInfo.td.
To simplify future changes that affect both files, this commit moves
those patterns to rearrange them into a similar sequence.
No effect on generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178001 91177308-0d34-0410-b5e6-96231b3b80d8
Use a MapVector on types where the iteration order matters.
Otherwise we doesn't always produce a deterministic output.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177999 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR15570: SEGV: SCEV back-edge info invalid after dead code removal.
Indvars creates a SCEV expression for the loop's back edge taken
count, then determines that the comparison is always true and
removes it.
When loop-unroll asks for the expression, it contains a NULL
SCEVUnknkown (as a CallbackVH).
forgetMemoizedResults should invalidate the loop back edges expression.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177986 91177308-0d34-0410-b5e6-96231b3b80d8
its own library. These functions are bridging between the bitcode reader
and the ll parser which are in different libraries. Previously we didn't
have any good library to do this, and instead played fast and loose with
a "header only" set of interfaces in the Support library. This really
doesn't work well as evidenced by the recent attempt to add timing logic
to the these routines.
As part of this, make them normal functions rather than weird inline
functions, and sink the implementation into the library. Also clean up
the header to be nice and minimal.
This requires updating lots of build system dependencies to specify that
the IRReader library is needed, and several source files to not
implicitly rely upon the header file to transitively include all manner
of other headers.
If you are using IRReader.h, this commit will break you (the header
moved) and you'll need to also update your library usage to include
'irreader'. I will commit the corresponding change to Clang momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177971 91177308-0d34-0410-b5e6-96231b3b80d8
Move the CortexA9 resources into the CortexA9 SchedModel namespace. Define
resource mappings under the CortexA9 SchedModel. Define resources and mappings
for the SwiftModel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177968 91177308-0d34-0410-b5e6-96231b3b80d8
This is very much work in progress. Please send me a note if you start to depend
on the added abstract read/write resources. They are subject to change until
further notice.
The old itinerary is still the default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177967 91177308-0d34-0410-b5e6-96231b3b80d8
it's only really useful if you're going to crash anyways. Use it in the pretty stack trace
printer to kill the compiler if we hang while printing the stack trace.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177962 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow for verification and analysis of the merge function of
the data flow analyses in the ARC optimizer.
The actual implementation of this feature is by introducing calls to
the functions llvm.arc.annotation.{bottomup,topdown}.{bbstart,bbend}
which are only declared. Each such call takes in a pointer to a global
with the same name as the pointer whose provenance is being tracked and
a pointer whose name is one of our Sequence states and points to a
string that contains the same name.
To ensure that the optimizer does not consider these annotations in any
way, I made it so that the annotations are considered to be of IC_None
type.
A test case is included for this commit and the previous
ObjCARCAnnotation commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177952 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the inner works of the data flow analysis in ObjCARCOpts was hard to
get out of the optimizer for analysis of bugs or testing. All of the current ARC
unit tests are based off of testing the effect of the data flow
analysis (i.e. what statements are removed or moved, etc.). This creates
weakness in the current unit testing regimem since we are not actually testing
what effects various instructions have on the modeled pointer state.
Additionally in order to analyze a bug in the optimizer, one would need to track
by hand what the optimizer was actually doing either through use of DEBUG
statements or through the usage of a debugger, both yielding large loses in
developer productivity.
This patch deals with these two issues by providing ARC annotation
metadata that annotates instructions with the state changes that they cause in
various pointers as well as provides metadata to annotate provenance sources.
Specifically, we introduce the following metadata types:
1. llvm.arc.annotation.bottomup.
2. llvm.arc.annotation.topdown.
3. llvm.arc.annotation.provenancesource.
llvm.arc.annotation.{bottomup,topdown}: These annotations describes a state
change in a pointer when we are visiting instructions bottomup/topdown
respectively. The output format for both is the same:
!1 = metadata !{metadata !"(test,%x)", metadata !"S_Release", metadata !"S_Use"}
The first element is a string tuple with the following format:
(function,variable name)
The second two elements of the metadata show the previous state of the
pointer (in this case S_Release) and the new state of the pointer (S_Use). We
write the metadata in such a manner to ensure that it is easy for outside tools
to parse. This is important since I am currently working on a tool for taking
this information and pretty printing it besides the IR and that can be used for
LIT style testing via the generation of an index.
llvm.arc.annotation.provenancesource: This metadata is used to annotate
instructions which act as provenance sources, i.e. ones that introduce a
new (from the optimizer's perspective) non-argument pointer to track. This
enables cross-referencing in between provenance sources and the state changes
that occur to them.
This is still a work in progress. Additionally I plan on committing
later today additions to the annotations that annotate at the top/bottom
of basic blocks the state of the various pointers being tracked.
*NOTE* The metadata support is conditionally compiled into libObjCARCOpts only
when we are producing a debug build of llvm/clang and even so are
disabled by default. To enable the annotation metadata, pass in
-enable-objc-arc-annotations to opt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177951 91177308-0d34-0410-b5e6-96231b3b80d8
- It's still considered aligned when the specified alignment is larger
than the natural alignment;
- The new alignment for the high 128-bit vector should be min(16,
alignment) as the pointer is advanced by 16, a power-of-2 offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177947 91177308-0d34-0410-b5e6-96231b3b80d8
- Handle the case where the result of 'insert_subvect' is bitcasted
before 'extract_subvec'. This removes the redundant insertf128/extractf128
pair on unaligned 256-bit vector load/store on vectors of non 64-bit integer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177945 91177308-0d34-0410-b5e6-96231b3b80d8