Consider the following:
typedef unsigned short ushort4U __attribute__((ext_vector_type(4),
aligned(2)));
typedef unsigned short ushort4 __attribute__((ext_vector_type(4)));
typedef unsigned short ushort8 __attribute__((ext_vector_type(8)));
typedef int int4 __attribute__((ext_vector_type(4)));
int4 __bbase_cvt_int(ushort4 v) {
ushort8 a;
a.lo = v;
return _mm_cvtepu16_epi32(a);
}
This generates the, not unreasonable, IR:
define <4 x i32> @foo0(double %v.coerce) nounwind ssp {
%tmp = bitcast double %v.coerce to <4 x i16>
%tmp1 = shufflevector <4 x i16> %tmp, <4 x i16> undef, <8 x i32> <i32
%0, i32 1, i32 2, i32 3, i32 undef, i32 undef, i32 undef, i32 undef>
%tmp2 = tail call <4 x i32> @llvm.x86.sse41.pmovzxwd(<8 x i16> %tmp1)
ret <4 x i32> %tmp2
}
The problem is when type legalization gets hold of the v4i16. It
legalizes that by spilling to the stack, then doing a zero-extending
load. Things go even more silly from there, ending up with something
like:
_foo0:
movsd %xmm0, -8(%rsp) <== Spill to the stack.
movq -8(%rsp), %xmm0 <== Reload it right back out.
pmovzxwd %xmm0, %xmm1 <== Here's what we actually asked for.
pblendw $1, %xmm1, %xmm0 <== We don't need this at all
pmovzxwd %xmm0, %xmm0 <== We already did this
ret
The v8i8 to v8i16 zext intrinsic gives even worse results, with two
table lookups via pshufb instructions(!!).
To avoid all that, we can move the bitcasting until after we've formed
the wider (legal) vector type. Then our normal codegen flows along
nicely and we get the expected:
_foo0:
pmovzxwd %xmm0, %xmm0
ret
rdar://15245794
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192866 91177308-0d34-0410-b5e6-96231b3b80d8
The reason this got reverted was that the @feat.00 symbol which was emitted
for every TU became quoted, and on cygwin/mingw we use the gas assembler which
couldn't handle the quotes.
This commit fixes the problem by only emitting @feat.00 for win32, where we use
clang -cc1as to assemble. gas would just drop this symbol anyway, so there is no
loss there.
With @feat.00 gone, there shouldn't be quoted symbols showing up on cygwin since
it uses the Itanium ABI, which doesn't put these funny characters in symbols.
> Because of win32 mangling, we produce symbol and section names with
> funny characters in them, most notably @ characters.
>
> MC would choke on trying to parse its own assembly output. This patch addresses
> that by:
>
> - Making @ trigger quoting of symbol names
> - Also quote section names in the same way
> - Just parse section names like other identifiers (to allow for quotes)
> - Don't assume @ signifies a symbol variant if it is in a string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192859 91177308-0d34-0410-b5e6-96231b3b80d8
We were calling llvm_unreachable() when failing to optimize the
branch into if case. However, it is still possible for us
to structurize the CFG by duplicating blocks even if this optimization
fails.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192813 91177308-0d34-0410-b5e6-96231b3b80d8
This happens e.g. with <2 x i64> -1 on x86_32. It cannot be generated directly
because i64 is illegal. It would be nice if getNOT would handle this
transparently, but I don't see a way to generate a legal constant there right
now. Fixes PR17487.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192795 91177308-0d34-0410-b5e6-96231b3b80d8
The input to an RxSBG operation can be narrower as long as the upper bits
are don't care. This fixes a FIXME added in r192783.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192790 91177308-0d34-0410-b5e6-96231b3b80d8
We previously used the default expansion to SELECT_CC, which in turn would
expand to "LHI; BRC; LHI". In most cases it's better to use an IPM-based
sequence instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192784 91177308-0d34-0410-b5e6-96231b3b80d8
This is really an extension of the current (shl (shr ...)) -> shl optimization.
The main difference is that certain upper bits must also not be demanded.
The motivating examples are the first two in the testcase, which occur
in llvmpipe output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192783 91177308-0d34-0410-b5e6-96231b3b80d8
GNU AS didn't like quotes in symbol names.
Error: junk at end of line, first unrecognized character is `"'
.def "@feat.00";
"@feat.00" = 1
Reproduced on Cygwin's 2.23.52.20130309 and mingw32's 2.20.1.20100303.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192775 91177308-0d34-0410-b5e6-96231b3b80d8
Because of win32 mangling, we produce symbol and section names with
funny characters in them, most notably @ characters.
MC would choke on trying to parse its own assembly output. This patch addresses
that by:
- Making @ trigger quoting of symbol names
- Also quote section names in the same way
- Just parse section names like other identifiers (to allow for quotes)
- Don't assume @ signifies a symbol variant if it is in a string.
Differential Revision: http://llvm-reviews.chandlerc.com/D1945
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192758 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the SelectionDAG scheduling preference to source
order. Soon, the SelectionDAG scheduler can be bypassed saving
a nice chunk of compile time.
Performance differences that result from this change are often a
consequence of register coalescing. The register coalescer is far from
perfect. Bugs can be filed for deficiencies.
On x86 SandyBridge/Haswell, the source order schedule is often
preserved, particularly for small blocks.
Register pressure is generally improved over the SD scheduler's ILP
mode. However, we are still able to handle large blocks that require
latency hiding, unlike the SD scheduler's BURR mode. MI scheduler also
attempts to discover the critical path in single-block loops and
adjust heuristics accordingly.
The MI scheduler relies on the new machine model. This is currently
unimplemented for AVX, so we may not be generating the best code yet.
Unit tests are updated so they don't depend on SD scheduling heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192750 91177308-0d34-0410-b5e6-96231b3b80d8
- Type of index used in extract_vector_elt or insert_vector_elt supposes
to be TLI.getVectorIdxTy() which is pointer type on most targets. It'd
better to truncate (or zero-extend in case it's changed later) it to
mask element type to guarantee they are matching instead of asserting
that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192722 91177308-0d34-0410-b5e6-96231b3b80d8
- Lower signed division by constant powers-of-2 to target-independent
DAG operators instead of target-dependent ones to support them better
on targets where vector types are legal but shift operators on that
types are illegal. E.g., on AVX, PSRAW is only available on <8 x i16>
though <16 x i16> is a legal type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192721 91177308-0d34-0410-b5e6-96231b3b80d8
rdar:15221834 False AVX register dependencies cause 5x slowdown on
flops-5/6 and significant slowdown on several others.
This was blocking the switch to MI-Sched.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192669 91177308-0d34-0410-b5e6-96231b3b80d8
through bitcast, ptrtoint, and inttoptr instructions. This is valid
only if the related instructions are in that same basic block, otherwise
we may reference variables that were not live accross basic blocks
resulting in undefined virtual registers.
The bug was exposed when both SDISel and FastISel were used within the same
function, i.e., one basic block is issued with FastISel and another with SDISel,
as demonstrated with the testcase.
<rdar://problem/15192473>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192636 91177308-0d34-0410-b5e6-96231b3b80d8
a) x86-64 TLS has been documented
b) the code path should use movq for the correct relocation
to be generated.
I've also added a fixme for the test case that we should improve
the code generated, it should look something like is documented
in the tls abi document.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192631 91177308-0d34-0410-b5e6-96231b3b80d8
Per original comment, the intention of this loop
is to go ahead and break the critical edge
(in order to sink this instruction) if there's
reason to believe doing so might "unblock" the
sinking of additional instructions that define
registers used by this one. The idea is that if
we have a few instructions to sink "together"
breaking the edge might be worthwhile.
This commit makes a few small changes
to help better realize this goal:
First, modify the loop to ignore registers
defined by this instruction. We don't
sink definitions of physical registers,
and sinking an SSA definition isn't
going to unblock an upstream instruction.
Second, ignore uses of physical registers.
Instructions that define physical registers are
rejected for sinking, and so moving this one
won't enable moving any defining instructions.
As an added bonus, while virtual register
use-def chains are generally small due
to SSA goodness, iteration over the uses
and definitions (used by hasOneNonDBGUse)
for physical registers like EFLAGS
can be rather expensive in practice.
(This is the original reason for looking at this)
Finally, to keep things simple continue
to only consider this trick for registers that
have a single use (via hasOneNonDBGUse),
but to avoid spuriously breaking critical edges
only do so if the definition resides
in the same MBB and therefore this one directly
blocks it from being sunk as well.
If sinking them together is meant to be,
let the iterative nature of this pass
sink the definition into this block first.
Update tests to accomodate this change,
add new testcase where sinking avoids pipeline stalls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192608 91177308-0d34-0410-b5e6-96231b3b80d8
The alignment of allocated space was wrong, see Bugzila 17345.
Done by Zvi Rackover <zvi.rackover@intel.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192573 91177308-0d34-0410-b5e6-96231b3b80d8
When if converting something like:
true:
... = R0<kill>
false:
... = R0<kill>
then the instructions of the true block must not have a <kill> flag
anymore, as the instruction of the false block follow and do still read
the R0 value.
Specifically this patch determines the set of register live-in in the
false block (possibly after simulating the liveness changes of the
duplicated instructions). Each of these live-in registers mustn't be
killed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192482 91177308-0d34-0410-b5e6-96231b3b80d8
This should fix the buildbots.
Original commit message:
[DAGCombiner] Slice a big load in two loads when the element are next to each
other in memory and the target has paired load and performs post-isel loads
combining.
E.g., this optimization will transform something like this:
a = load i64* addr
b = trunc i64 a to i32
c = lshr i64 a, 32
d = trunc i64 c to i32
into:
b = load i32* addr1
d = load i32* addr2
Where addr1 = addr2 +/- sizeof(i32), if the target supports paired load and
performs post-isel loads combining.
One should overload TargetLowering::hasPairedLoad to provide this information.
The default is false.
<rdar://problem/14477220>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192476 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r192454
Apparently FileCheck isn't as smart as I though and does not enforce a
topological order between variable defs+uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192472 91177308-0d34-0410-b5e6-96231b3b80d8
other in memory and the target has paired load and performs post-isel loads
combining.
E.g., this optimization will transform something like this:
a = load i64* addr
b = trunc i64 a to i32
c = lshr i64 a, 32
d = trunc i64 c to i32
into:
b = load i32* addr1
d = load i32* addr2
Where addr1 = addr2 +/- sizeof(i32), if the target supports paired load and
performs post-isel loads combining.
One should overload TargetLowering::hasPairedLoad to provide this information.
The default is false.
<rdar://problem/14477220>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192471 91177308-0d34-0410-b5e6-96231b3b80d8
For NVPTX, this fixes a crash where the emitImplicitDef implementation was expecting physical registers,
while NVPTX uses virtual registers (with a couple of exceptions). Now, the implicit def comment will be
emitted as a true PTX register name. Other targets can use this to customize the output of implicit def
comments.
Fixes PR17519
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192444 91177308-0d34-0410-b5e6-96231b3b80d8
When a ConstantExpr which uses a thread local is part of a PHI node
instruction, the insruction that replaces the ConstantExpr must
be inserted in the predecessor block, in front of the terminator instruction.
If the predecessor block has multiple successors, the edge is first split.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192432 91177308-0d34-0410-b5e6-96231b3b80d8
We can't enable the verifier for tests with SI_IF and SI_ELSE, because
these instructions are always followed by a COPY which copies their
result to the next basic block. This violates the machine verifier's
rule that non-terminators can not folow terminators.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192366 91177308-0d34-0410-b5e6-96231b3b80d8
When we had a sequence like:
s1 = VLDRS [r0, 1], Q0<imp-def>
s3 = VLDRS [r0, 2], Q0<imp-use,kill>, Q0<imp-def>
s0 = VLDRS [r0, 0], Q0<imp-use,kill>, Q0<imp-def>
s2 = VLDRS [r0, 4], Q0<imp-use,kill>, Q0<imp-def>
we were gathering the {s0, s1} loads below the s3 load. This is fine,
but confused the verifier since now the s3 load had Q0<imp-use> with
no definition above it.
This should mark such uses <undef> as well. The liveness structure at
the beginning and end of the block is unaffected, and the true sN
definitions should prevent any dodgy reorderings being introduced
elsewhere.
rdar://problem/15124449
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192344 91177308-0d34-0410-b5e6-96231b3b80d8
Substantial SelectionDAG scheduling is going away soon, and is
interfering with Hao's attempts to implement LDn/STn instructions, so
I say we make the leap first.
There were a few reorderings (inevitably) which broke some tests. I
tried to replace them with CHECK-DAG variants mostly, but some too
complex for that to be useful and I just reordered them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192282 91177308-0d34-0410-b5e6-96231b3b80d8
Mips16 will try and create a stub for it and this will
result in a link error because that function does not exist in libc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192223 91177308-0d34-0410-b5e6-96231b3b80d8
from struct byval to registers.
We used to pass 0 which means the alignment of PtrVT. Even when the alignment
of the struct is smaller than 4, the LOADs would have alignment of 4, and
further optimizations could combine the LOADs into a ldm, which would
cause crash.
The fix is to pass the alignment of the struct byval.
rdar://problem/15144402
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192126 91177308-0d34-0410-b5e6-96231b3b80d8
Bitcasting everything to i8* won't work. Autoupgrade the old
intrinsic declarations to use the new mangling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192117 91177308-0d34-0410-b5e6-96231b3b80d8
Regalloc can emit unaligned spills nowadays, but we can't fold the
spills into SSE ops if we can't guarantee alignment. PR12250.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192064 91177308-0d34-0410-b5e6-96231b3b80d8
This is required because i64 is a legal type but addxcc/subxcc reads icc carry bit, which are 32 bit conditional codes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192054 91177308-0d34-0410-b5e6-96231b3b80d8
The most likely case where this error happens is when the user specifies
too many register operands. Don't make it look like an internal LLVM bug
when we can see that the error is coming from an inline asm instruction.
For other instructions we keep the "ran out of registers" error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192041 91177308-0d34-0410-b5e6-96231b3b80d8
optimizeSelect folds (predicated) copy instructions, it must not ignore
the original register class of the operand when replacing the register
with the copies dest register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191963 91177308-0d34-0410-b5e6-96231b3b80d8
The jump doesn't really kill the registers, the following call does but
we never get back anyway.
This avoids some verify-machineinstrs problems when TAILJUMPs are
if-converted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191962 91177308-0d34-0410-b5e6-96231b3b80d8
Copy over the whole register machine operand instead of creating a new one
with an incomplete set of flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191961 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks for Dimitry Andric, Rafael Espindola, and Benjamin Kramer
for providing and progressively reducing the test case!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191782 91177308-0d34-0410-b5e6-96231b3b80d8
There are no corresponding patterns for small immediates because they would
prevent the use of fused compare-and-branch instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191775 91177308-0d34-0410-b5e6-96231b3b80d8
This function-attribute modifies the callee-saved register list and function
epilogue (specifically the return instruction) so that a routine is suitable
for use as an interrupt-handler of the specified type without disrupting
user-mode applications.
rdar://problem/14207019
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191766 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to low words, we can use the shorter LLIHL and LLIHH if it turns
out that the other half of the GR64 isn't live.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191750 91177308-0d34-0410-b5e6-96231b3b80d8
This just adds the basics necessary for allocating the upper words to
virtual registers (move, load and store). The move support is parameterised
in a way that makes it easy to handle zero extensions, but the associated
zero-extend patterns are added by a later patch.
The easiest way of testing this seemed to be add a new "h" register
constraint for high words. I don't expect the constraint to be useful
in real inline asms, but it should work, so I didn't try to hide it
behind an option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191739 91177308-0d34-0410-b5e6-96231b3b80d8
We were completely ignoring the unorder/ordered attributes of condition
codes and also incorrectly lowering seto and setuo.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191603 91177308-0d34-0410-b5e6-96231b3b80d8
of loops.
Previously, two consecutive calls to function "func" would result in the
following sequence of instructions:
1. load $16, %got(func)($gp) // load address of lazy-binding stub.
2. move $25, $16
3. jalr $25 // jump to lazy-binding stub.
4. nop
5. move $25, $16
6. jalr $25 // jump to lazy-binding stub again.
With this patch, the second call directly jumps to func's address, bypassing
the lazy-binding resolution routine:
1. load $25, %got(func)($gp) // load address of lazy-binding stub.
2. jalr $25 // jump to lazy-binding stub.
3. nop
4. load $25, %got(func)($gp) // load resolved address of func.
5. jalr $25 // directly jump to func.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191591 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the command line argument "struct-path-tbaa" since we should not depend
on command line argument to decide which format the IR file is using. Instead,
we check the first operand of the tbaa tag node, if it is a MDNode, we treat
it as struct-path aware TBAA format, otherwise, we treat it as scalar TBAA
format.
When clang starts to use struct-path aware TBAA format no matter whether
struct-path-tbaa is no, and we can auto-upgrade existing bc files, the support
for scalar TBAA format can be dropped.
Existing testing cases are updated to use the struct-path aware TBAA format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191538 91177308-0d34-0410-b5e6-96231b3b80d8
The backend tries to use block operations like MVC, NC, OC and XC for
simple scalar operations. For correctness reasons, it rejects any case
in which the regions might partially overlap. However, for performance
reasons, it should also reject cases where the regions might be equal,
since the instruction might then not use the fast path.
This fixes a performance regression seen in bzip2. We may want to limit
the optimisation even more in future, or even remove it entirely, but I'll
try with this for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191525 91177308-0d34-0410-b5e6-96231b3b80d8
The backend previously folded offsets into PC-relative addresses
whereever possible. That's the right thing to do when the address
can be used directly in a PC-relative memory reference (using things
like LRL). But if we have a register-based memory reference and need
to load the PC-relative address separately, it's better to use an anchor
point that could be shared with other accesses to the same area of the
variable.
Fixes a FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191524 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is lowered into an equivalent INSERT_VECTOR_ELT which is
further lowered into a sequence of insert.w's on MIPS32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191521 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is lowered into an equivalent BUILD_VECTOR which is further
lowered into a sequence of insert.w's on MIPS32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191519 91177308-0d34-0410-b5e6-96231b3b80d8
For v4f32 and v2f64, INSERT_VECTOR_ELT is matched by a pseudo-insn which is
later expanded to appropriate insve.[wd] insns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191515 91177308-0d34-0410-b5e6-96231b3b80d8
For v4f32 and v2f64, EXTRACT_VECTOR_ELT is matched by a pseudo-insn which may
be expanded to subregister copies and/or instructions as appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191514 91177308-0d34-0410-b5e6-96231b3b80d8
This change fixes the problem reported in pr17380 and re-add the dagcombine
transformation ensuring that the value types are always legal if the
transformation is triggered after Legalization took place.
Added the test case from pr17380.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191509 91177308-0d34-0410-b5e6-96231b3b80d8
When generating code for shared libraries, even local calls may be
intercepted, so we need a nop after the call for the linker to fix up the
TOC. Test case adapted from the one provided in PR17354.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191440 91177308-0d34-0410-b5e6-96231b3b80d8
Generally, it is desirable to distribute (a + b) * c to a*c + b*c for
ARM with VMLx forwarding, where a, b and c are vectors.
However, for (a + b)*(a + b), distribution will result in one extra
instruction.
With distribution:
x = a + b (add)
y = a * x (mul)
z = y + b * y (mla)
Without distribution:
x = a + b (add)
z = x * x (mul)
This patch checks if a mul is a square of add/sub. If yes, skip
distribution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191410 91177308-0d34-0410-b5e6-96231b3b80d8
(shl (zext (shr A, X)), X) => (zext (shl (shr A, X), X)).
The rule only triggers when there are no other uses of the
zext to avoid materializing more instructions.
This helps the DAGCombiner understand that the shl/shr
sequence can then be converted into an and instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191393 91177308-0d34-0410-b5e6-96231b3b80d8
PEI inserts a save/restore sequence for the link register, according to the
information it gets from the MachineRegisterInfo.
MachineRegisterInfo is populated by the VirtRegMap pass.
This pass was not aware of noreturn calls and was registering the definitions of
these calls the same way as regular operations.
Modify VirtRegPass so that it does not set the isPhysRegUsed information for
registers only defined by noreturn calls.
The rational is that a noreturn call is the "last instruction" of the program
(if it returns the behavior is undefined), so everything that is defined by it
cannot be used and will not interfere with anything else. Therefore, it is
pointless to account for then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191349 91177308-0d34-0410-b5e6-96231b3b80d8
This is being disabled because it is no longer needed for
performance. It is only used by postRAscheduler which is also planned
for removal, and it is implemented with an out-dated view of register
liveness. It consideres aliases instead of register units, assumes
valid kill flags, and assumes implicit uses on partial register
defs. Kill flags and implicit operands are error prone and impossible
to verify. We should gradually eliminate dependence on them in the
postRA phases.
Targets that still benefit from this should move to the MI
scheduler. If that doesn't solve the problem, then we should add a
hook to regalloc to optimize reload placement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191348 91177308-0d34-0410-b5e6-96231b3b80d8
Most constant BUILD_VECTOR's are matched using ComplexPatterns which cover
bitcasted as well as normal vectors. However, it doesn't seem to be possible to
match ldi.[bhwd] in a type-agnostic manner (e.g. to support the widest range of
immediates, it should be possible to use ldi.b to load v2i64) using TableGen so
ldi.[bhwd] is matched using custom code in MipsSEISelDAGToDAG.cpp
This made the majority of the constant splat BUILD_VECTOR lowering redundant.
The only transformation remaining for constant splats is when an (up-to) 32-bit
constant splat is possible but the value does not fit into a 10-bit signed
integer. In this case, the BUILD_VECTOR is transformed into a bitcasted
BUILD_VECTOR so that fill.[bhw] can be used to splat the vector from a GPR32
register (which is initialized using the usual lui/addui sequence).
There are no additional tests since this is a re-implementation of previous
functionality. The change is intended to make it easier to implement some of
the upcoming instruction selection patches since they can rely on existing
support for BUILD_VECTOR's in the DAGCombiner.
compare_float.ll changed slightly because a BITCAST is no longer
introduced during legalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191299 91177308-0d34-0410-b5e6-96231b3b80d8
MIPS SelectionDAG changes:
* Added VCEQ, VCL[ET]_[SU] nodes to represent vector comparisons that produce a bitmask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191286 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Ana Pazos.
1.Added support for v1ix and v1fx types.
2.Added Scalar Pairwise Reduce instructions.
3.Added initial implementation of Scalar Arithmetic instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191263 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes a copy from a vreg -> vreg sneaks into the middle of a terminator
sequence. It is safe to slice this into the stack protector success bb.
This fixes PR16979.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191260 91177308-0d34-0410-b5e6-96231b3b80d8
The recursive nature of the address selection code can cause the stack to
explode if there is a long chain of GEPs. Convert the recursive bit into a
iterative method to avoid this.
<rdar://problem/12445434>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191252 91177308-0d34-0410-b5e6-96231b3b80d8
Changes to MIPS SelectionDAG:
* Added nodes VEXTRACT_[SZ]EXT_ELT to represent extract and extend in a single
operation and implemented the DAG combines necessary to fold sign/zero
extends into the extract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191199 91177308-0d34-0410-b5e6-96231b3b80d8
Note: There's a later patch on my branch that re-implements this to select
build_vector without the custom SelectionDAG nodes. The future patch avoids
the constant-folding problems stemming from the custom node (i.e. it doesn't
need to re-implement all the DAG combines related to BUILD_VECTOR).
Changes to MIPS specific SelectionDAG nodes:
* Added VSPLAT
This is a special case of BUILD_VECTOR that covers the case the
BUILD_VECTOR is a splat operation.
* Added VSPLATD
This is a special case of VSPLAT that handles the cases when v2i64 is legal
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191191 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191165 91177308-0d34-0410-b5e6-96231b3b80d8
In AVX 256bit vectors are valid vectors and therefore the Type Legalizer doesn't
split the VSELECT and SETCC nodes. AVX only supports MIN/MAX on 128bit vectors
and this fix enables vector splitting for this special case in the X86 DAG
Combiner.
This fix is related to PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191131 91177308-0d34-0410-b5e6-96231b3b80d8
The Type Legalizer recognizes that VSELECT needs to be split, because the type
is to wide for the given target. The same does not always apply to SETCC,
because less space is required to encode the result of a comparison. As a result
VSELECT is split and SETCC is unrolled into scalar comparisons.
This commit fixes the issue by checking for VSELECT-SETCC patterns in the DAG
Combiner. If a matching pattern is found, then the result mask of SETCC is
promoted to the expected vector mask for the given target. This mask has usually
te same size as the VSELECT return type (except for Intel KNL). Now the type
legalizer will split both VSELECT and SETCC.
This allows the following X86 DAG Combine code to sucessfully detect the MIN/MAX
pattern. This fixes PR16695, PR17002, and <rdar://problem/14594431>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191130 91177308-0d34-0410-b5e6-96231b3b80d8
C-like languages promote types like unsigned short to unsigned int before
performing an arithmetic operation. Currently the rotate matcher in the
DAGCombiner does not consider this situation.
This commit extends the DAGCombiner in the way that the pattern
(or (shl ([az]ext x), (*ext y)), (srl ([az]ext x), (*ext (sub 32, y))))
is folded into
([az]ext (rotl x, y))
The matching is restricted to aext and zext because in this cases the upper
bits are either undefined or known. Test case is included.
This fixes PR16726.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191049 91177308-0d34-0410-b5e6-96231b3b80d8
C-like languages promote types like unsigned short to unsigned int before
performing an arithmetic operation. Currently the rotate matcher in the
DAGCombiner does not consider this situation.
This commit extends the DAGCombiner in the way that the pattern
(or (shl ([az]ext x), (*ext y)), (srl ([az]ext x), (*ext (sub 32, y))))
is folded into
([az]ext (rotl x, y))
The matching is restricted to aext and zext because in this cases the upper
bits are either undefined or known. Test case is included.
This fixes PR16726.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191045 91177308-0d34-0410-b5e6-96231b3b80d8
When selecting the DAG (add (WrapperRIP ...), (FrameIndex ...)), X86 code had
spotted the FrameIndex possibility and was working out whether it could fold
the WrapperRIP into this.
The test for forming a %rip version is notionally whether we already have a
base or index register (%rip precludes both), but we were forgetting to account
for the register that would be inserted later to access the frame.
rdar://problem/15024520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190995 91177308-0d34-0410-b5e6-96231b3b80d8
1) make sure that the first two instructions of the sequence cannot
separate from each other. The linker requires that they be sequential.
If they get separated, it can still work but it will not work in all
cases because the first of the instructions mostly involves the hi part
of the pc relative offset and that part changes slowly. You would have
to be at the right boundary for this to matter.
2) make sure that this sequence begins on a longword boundary.
There appears to be a bug in binutils which makes some of these calculations
get messed up if the instruction sequence does not begin on a longword
boundary. This is being investigated with the appropriate binutils folks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190966 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason I never got around to adding these at the same time as
the signed versions. No idea why.
I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether
it should just be replaced with an "is normal" flag. I'll leave that
for later though.
There are some boundary conditions that can be tweaked, such as preferring
unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256",
but again I'll leave those for a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We indicate that the object files are safe by emitting a @feat.00
absolute address symbol. The address is presumably interpreted as a
bitfield of features that the compiler would like to enable. Bit 0 is
documented in the PE COFF spec to opt in to "registered SEH", which is
what /safeseh enables.
LLVM's object files are safe by default because LLVM doesn't know how to
produce SEH handlers.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1691
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190898 91177308-0d34-0410-b5e6-96231b3b80d8
Large code model on PPC64 requires creating and referencing TOC entries when
using the addis/ld form of addressing. This was not being done in all cases.
The changes in this patch to PPCAsmPrinter::EmitInstruction() fix this. Two
test cases are also modified to reflect this requirement.
Fast-isel was not creating correct code for loading floating-point constants
using large code model. This also requires the addis/ld form of addressing.
Previously we were using the addis/lfd shortcut which is only applicable to
medium code model. One test case is modified to reflect this requirement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190882 91177308-0d34-0410-b5e6-96231b3b80d8
When a truncate node defines a legal vector type but uses an illegal
vector type, the legalization process was splitting the vector until
<1 x vector> type, but then it was failing to scalarize the node because
it did not know how to handle TRUNCATE.
<rdar://problem/14989896>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190830 91177308-0d34-0410-b5e6-96231b3b80d8
- check that -mcpu=slm uses the call register indirect optimization
- check that -mcpu=slm runs the scheduler
- check that -mcpu=slm supports the movbe instruction
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190814 91177308-0d34-0410-b5e6-96231b3b80d8
The port originally had special patterns for extload, mapping them to the
same instructions as sextload. It seemed neater to have patterns that
match "an extension that is allowed to be signed" and "an extension that
is allowed to be unsigned".
This was originally meant to be a clean-up, but it does improve the handling
of promoted integers a little, as shown by args-06.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190777 91177308-0d34-0410-b5e6-96231b3b80d8
This is a re-commit of r190764, with an extra check to make sure that we're not
performing the transformation on illegal types (a small test case has been
added for this as well).
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190771 91177308-0d34-0410-b5e6-96231b3b80d8
This is causing test-suite failures.
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190765 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190764 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::isAlias can be called with SrcValue1 or SrcValue2 null, and we
can't use AA in this case (if we try, then the casting code in AA will assert).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190763 91177308-0d34-0410-b5e6-96231b3b80d8
When a structure is passed by value, and that structure contains a vector
member, according to the PPC ABI, the structure will receive enhanced alignment
(so that the vector within the structure will always be aligned).
This should resolve PR16641.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190636 91177308-0d34-0410-b5e6-96231b3b80d8
In fast-math mode sqrt(x) is calculated using the fast expansion of the
reciprocal of the reciprocal sqrt expansion. The reciprocal and reciprocal
sqrt expansions use the associated estimate instructions along with some Newton
iterations. Unfortunately, as a result, sqrt(0) was being calculated as NaN,
which is not correct. Now we explicitly return a result of zero if the input is
zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190624 91177308-0d34-0410-b5e6-96231b3b80d8
Aggressive anti-dependency breaking is enabled by default for all PPC cores.
This provides a general speedup on the P7 and other platforms (among other
factors, the instruction group formation for the non-embedded PPC cores is done
during post-RA scheduling). In order to do this safely, the incompatibility
between uses of the MFOCRF instruction and anti-dependency breaking are
resolved by marking MFOCRF with hasExtraSrcRegAllocReq. As noted in the removed
FIXME, the problem was that MFOCRF's output is sensitive to the identify of the
source register, and always paired with a shift to undo this effect. Because
anti-dependency breaking is unaware of this hidden dependency of the shift
amount on the source register of the MFOCRF instruction, changing that register
must be inhibited.
Two test cases were adjusted: The SjLj test was made more insensitive to
register choices and scheduling; the saveCR test disabled anti-dependency
breaking because part of what it is testing is proper register reuse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190587 91177308-0d34-0410-b5e6-96231b3b80d8
For _XYZ, the type of VDATA is v4i32, because v3i32 doesn't exist.
The ADDR64 bit is not exposed. A simpler intrinsic that doesn't take
a resource descriptor might be nicer.
The maximum number of input SGPRs is bumped to 17.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190575 91177308-0d34-0410-b5e6-96231b3b80d8
The main complication here is that TM and TMY (the memory forms) set
CC differently from the register forms. When the tested bits contain
some 0s and some 1s, the register forms set CC to 1 or 2 based on the
value the uppermost bit. The memory forms instead set CC to 1
regardless of the uppermost bit.
Until now, I've tried to make it so that a branch never tests for an
impossible CC value. E.g. NR only sets CC to 0 or 1, so branches on the
result will only test for 0 or 1. Originally I'd tried to do the same
thing for TM and TMY by using custom matching code in ISelDAGToDAG.
That ended up being very ugly though, and would have meant duplicating
some of the chain checks that the common isel code does.
I've therefore gone for the simpler alternative of adding an extra
operand to the TM DAG opcode to say whether a memory form would be OK.
This means that the inverse of a "TM;JE" is "TM;JNE" rather than the
more precise "TM;JNLE", just like the inverse of "TMLL;JE" is "TMLL;JNE".
I suppose that's arguably less confusing though...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190400 91177308-0d34-0410-b5e6-96231b3b80d8
IT blocks can only be one instruction lonf, and can only contain a subset of
the 16 instructions.
Patch by Artyom Skrobov!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190309 91177308-0d34-0410-b5e6-96231b3b80d8
Fix XCoreLowerThreadLocal trying to initialise globals
which have no initializer.
Add handling of const expressions containing thread local variables.
These need to be replaced with instructions, as the thread ID is
used to access the thread local variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190300 91177308-0d34-0410-b5e6-96231b3b80d8
This sidesteps a bug in PrescheduleNodesWithMultipleUses() which
does not check if callResources will be affected by the transformation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190299 91177308-0d34-0410-b5e6-96231b3b80d8
We used to generate the compact unwind encoding from the machine
instructions. However, this had the problem that if the user used `-save-temps'
or compiled their hand-written `.s' file (with CFI directives), we wouldn't
generate the compact unwind encoding.
Move the algorithm that generates the compact unwind encoding into the
MCAsmBackend. This way we can generate the encoding whether the code is from a
`.ll' or `.s' file.
<rdar://problem/13623355>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190290 91177308-0d34-0410-b5e6-96231b3b80d8
precision loads and stores as well as reg+imm double precision loads and stores.
Previously, expansion of loads and stores was done after register allocation,
but now it takes place during legalization. As a result, users will see double
precision stores and loads being emitted to spill and restore 64-bit FP registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190235 91177308-0d34-0410-b5e6-96231b3b80d8
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190205 91177308-0d34-0410-b5e6-96231b3b80d8
field of DICompositeType.
This will help the follow-on patch of using DITypeRef for containing-type field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190187 91177308-0d34-0410-b5e6-96231b3b80d8
Occasionally DAGCombiner can spot that a SETCC operation is completely
redundant and reduce it to "all true" or "all false". If this happens to a
vector, the value produced has to take account of what a normal comparison
would have produced, which may be an all-1s bitmask.
The fix in SelectionDAG.cpp is tested, however, as far as I can see the code in
TargetLowering.cpp is possibly unreachable and almost certainly irrelevant when
triggered so there are no tests. However, I believe it's still clearly the
right change and may save someone else some hassle if it suddenly becomes
reachable. So I'm doing it anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190147 91177308-0d34-0410-b5e6-96231b3b80d8
The architecture has many comparison instructions, including some that
extend one of the operands. The signed comparison instructions use sign
extensions and the unsigned comparison instructions use zero extensions.
In cases where we had a free choice between signed or unsigned comparisons,
we were trying to decide at lowering time which would best fit the available
instructions, taking things like extension type into account. The code
to do that was getting increasingly hairy and was also making some bad
decisions. E.g. when comparing the result of two LLCs, it is better to use
CR rather than CLR, since CR can be fused with a branch while CLR can't.
This patch removes the lowering code and instead adds an operand to
integer comparisons to say whether signed comparison is required,
whether unsigned comparison is required, or whether either is OK.
We can then leave the choice of instruction up to the normal isel code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190138 91177308-0d34-0410-b5e6-96231b3b80d8
If the DAG already has only legal types, then the second round of DAG combines
is skipped. In this case VSELECT+SETCC patterns that match a more efficient
instruction (e.g. min/max) are never recognized.
This fix allows VSELECT+SETCC combines if the types are already legal before DAG
type legalization.
Reviewer: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190105 91177308-0d34-0410-b5e6-96231b3b80d8
Solution is not sufficient to prevent 'mov pc, lr' being emitted for jump table code.
Test case doesn't trigger the added functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190047 91177308-0d34-0410-b5e6-96231b3b80d8
This improves code generation for jump tables by avoiding the emission of "mov pc, lr" which could fool the processor into believing this is a return from a function causing mispredicts. The code generation logic for jump tables uses ADR to materialize the address of the jump target.
Patch by Daniel Stewart!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190043 91177308-0d34-0410-b5e6-96231b3b80d8
In sparc, setjmp stores only the registers %fp, %sp, %i7 and %o7. longjmp restores
the stack, and the callee-saved registers (all local/in registers: %i0-%i7, %l0-%l7)
using the stored %fp and register windows. However, this does not guarantee that the longjmp
will restore the registers, as they were when the setjmp was called. This is because these
registers may be clobbered after returning from setjmp, but before calling longjmp.
This patch prevents the registers %i0-%i5, %l0-l7 to live across the setjmp call using the register mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190033 91177308-0d34-0410-b5e6-96231b3b80d8
Fast register pressure tracking currently only takes effect during
bottom up scheduling. Forcing this is a bit faster and simpler for
targets that don't have many scheduling constraints and don't need
top-down scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190014 91177308-0d34-0410-b5e6-96231b3b80d8
'Force' values in registers using the calling convention. Now, we only depend on
the calling convention and that the allocator performs copy coalescing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189985 91177308-0d34-0410-b5e6-96231b3b80d8
