Make sure the low bit of the PC is set when loading an address directly
for jump tables in static relocation model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138912 91177308-0d34-0410-b5e6-96231b3b80d8
When we want encoding T3 (the wide encoding), we can explicitly check for
that and twiddle the CanAcceptCarrySet accordingly. For now, just correctly
handle encodings T1 and T2 when in Thumb2 mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138879 91177308-0d34-0410-b5e6-96231b3b80d8
When the destination register of an add immediate instruction is
explicitly specified, encoding T1 is preferred, else encoding T2 is
preferred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138862 91177308-0d34-0410-b5e6-96231b3b80d8
It appears that our use of the imp-use and imp-def flags with
sub-registers is not yet robust enough to support this.
The failing test case is complicated, I am working on a reduction.
<rdar://problem/10044201>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138861 91177308-0d34-0410-b5e6-96231b3b80d8
Add a instruction flag: hasPostISelHook which tells the pre-RA scheduler to
call a target hook to adjust the instruction. For ARM, this is used to
adjust instructions which may be setting the 's' flag. ADC, SBC, RSB, and RSC
instructions have implicit def of CPSR (required since it now uses CPSR physical
register dependency rather than "glue"). If the carry flag is used, then the
target hook will *fill in* the optional operand with CPSR. Otherwise, the hook
will remove the CPSR implicit def from the MachineInstr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138810 91177308-0d34-0410-b5e6-96231b3b80d8
register dependency (rather than glue them together). This is general
goodness as it gives scheduler more freedom. However it is motivated by
a nasty bug in isel.
When a i64 sub is expanded to subc + sube.
libcall #1
\
\ subc
\ / \
\ / \
\ / libcall #2
sube
If the libcalls are not serialized (i.e. both have chains which are dag
entry), legalizer can serialize them in arbitrary orders. If it's
unlucky, it can force libcall #2 before libcall #1 in the above case.
subc
|
libcall #2
|
libcall #1
|
sube
However since subc and sube are "glued" together, this ends up being a
cycle when the scheduler combine subc and sube as a single scheduling
unit.
The right solution is to fix LegalizeType too chains the libcalls together.
However, LegalizeType is not processing nodes in order so that's harder than
it should be. For now, the move to physical register dependency will do.
rdar://10019576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138791 91177308-0d34-0410-b5e6-96231b3b80d8
This handles only the handling of the IT instruction itself, not the
processing and validation of the instructions in the IT block. That's next,
and will include encoding tests for IT itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138665 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last disassembly crash detected by exhaustive Thumb2 instruction space. Major thanks to Chandler Carruth for making this kind of exhaustive testing possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138625 91177308-0d34-0410-b5e6-96231b3b80d8
I don't really like the patterns, but I'm having trouble coming up with a
better way to handle them.
I plan on making other targets use the same legalization
ARM-without-memory-barriers is using... it's not especially efficient, but
if anyone cares, it's not that hard to fix for a given target if there's
some better lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138621 91177308-0d34-0410-b5e6-96231b3b80d8
We'll need to pay attention to them when we start getting more serious about
the details of parsing thumb2 assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138500 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the test FIXME and add parsing support for the ADD (SP plus immediate)
and ADD (SP plus register) instruction forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138488 91177308-0d34-0410-b5e6-96231b3b80d8
Add the predicate operand to the instructions. Update the back end
accordingly where the instructions are used. Restrict the SP operands
to actually only be SP, as otherwise these break assembly parsing for the
normal instruction variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138445 91177308-0d34-0410-b5e6-96231b3b80d8
It should go before AsmPrinter MC pseudo expansion since it's based on
MachineInstr, not MCInst. Otherwise any frame related pseudo instructions
may be missed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138386 91177308-0d34-0410-b5e6-96231b3b80d8
There is no non-writeback store multiple instruction in Thumb1, so
don't define one. As a result load multiple is the only instantiation of
the multiclass, so refactor that away entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138338 91177308-0d34-0410-b5e6-96231b3b80d8
It's not playing nicely in the coalescer with the tied operand. Disable
commutability for now while we figure out the deeper fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138278 91177308-0d34-0410-b5e6-96231b3b80d8
This pleases the register scavenger and brings
test/CodeGen/ARM/2011-08-12-vmovqqqq-pseudo.ll a little closer to
working with -verify-machineinstrs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138164 91177308-0d34-0410-b5e6-96231b3b80d8
Therefore, rather then generate a pseudo instruction, which is later expanded,
generate the necessary instructions in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138163 91177308-0d34-0410-b5e6-96231b3b80d8
Fix base register type and canonicallize to the "ldm" spelling rather than
"ldmia." Add diagnostics for incorrect writeback token and out-of-range
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137986 91177308-0d34-0410-b5e6-96231b3b80d8
These fixups are handled poorly in general, and should have a single
contiguous range of bits per fixup type, but that's not how they're
currently organized, so for now in complex ones like for blx, we just tell the
emitter it's OK for the fixup to munge any bit it wants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137947 91177308-0d34-0410-b5e6-96231b3b80d8
Represent the operand value as it will be encoded in the instruction. This
allows removing the specialized encoder and decoder methods entirely. Add
an assembler match class while we're at it to lay groundwork for parsing the
thumb shift instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137879 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb one requires that many arithmetic instruction forms have an 'S'
suffix. For Thumb2, the whether the suffix is required or precluded depends
on whether the instruction is in an IT block. Use target parser predicates
to check for these sorts of context-sensitive constraints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137746 91177308-0d34-0410-b5e6-96231b3b80d8
Allow a target assembly parser to do context sensitive constraint checking
on a potential instruction match. This will be used, for example, to handle
Thumb2 IT block parsing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137675 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently we never added code to expand these pseudo instructions, and in
over a year, no one has noticed. Our register allocator must be awesome!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137551 91177308-0d34-0410-b5e6-96231b3b80d8
Tidy up the code a bit and push the definition of the value next to the uses
to try to minimize this sort of issue from arising again while I'm at it.
rdar://9945172
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137525 91177308-0d34-0410-b5e6-96231b3b80d8
On Cortex-A8, we use the NEON v2f32 instructions for f32 arithmetic. For
better latency, we also send D-register copies down the NEON pipeline by
translating them to vorr instructions.
This patch promotes even S-register copies to D-register copies when
possible so they can also go down the NEON pipeline. Example:
vldr.32 s0, LCPI0_0
loop:
vorr d1, d0, d0
loop2:
...
vadd.f32 d1, d1, d16
The vorr instruction looked like this after regalloc:
%S2<def> = COPY %S0, %D1<imp-def>
Copies involving odd S-registers, and copies that don't define the full
D-register are left alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137182 91177308-0d34-0410-b5e6-96231b3b80d8
This new disassembler can correctly decode all the testcases that the old one did, though
some "expected failure" testcases are XFAIL'd for now because it is not (yet) as strict in
operand checking as the old one was.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137144 91177308-0d34-0410-b5e6-96231b3b80d8
Allow labels for load/store instructions when parsing. There's encoding
issues, still, so this doesn't work all the way through, yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137064 91177308-0d34-0410-b5e6-96231b3b80d8
More parsing support for indexed loads. Fix pre-indexed with writeback
parsing for register offsets and handle basic post-indexed offsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136982 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor STR[B] pre and post indexed instructions to use addressing modes for
memory operands, which is necessary for assembly parsing and is more consistent
with the rest of the memory instruction definitions. Make some incremental
progress on refactoring away the mega-operand addrmode2 along the way, which
is nice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136978 91177308-0d34-0410-b5e6-96231b3b80d8
The immediate portion of the operand is just a boolean (the 'U' bit indicating
add vs. subtract). Treat it as such.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136969 91177308-0d34-0410-b5e6-96231b3b80d8
Enhance support for LDR instruction assembly parsing for post-indexed
addressing with immediate values. Add tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136940 91177308-0d34-0410-b5e6-96231b3b80d8
Memory operand parsing is a bit haphazzard at the moment, in no small part
due to the even more haphazzard representations of memory operands in the .td
files. Start cleaning that all up, at least a bit.
The addressing modes in the .td files will be being simplified to not be
so monolithic, especially with regards to immediate vs. register offsets
and post-indexed addressing. addrmode3 is on its way with this patch, for
example.
This patch is foundational to enable going back to smaller incremental patches
for the individual memory referencing instructions themselves. It does just
enough to get the basics in place and handle the "make check" regression tests
we already have.
Follow-up work will be fleshing out the details and adding more robust test
cases for the individual instructions, starting with ARM mode and moving from
there into Thumb and Thumb2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136845 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the instruction encoding for operands. Refactor mode to use explicit
instruction definitions per FIXME to be more consistent with loads/stores.
Fix disassembler accordingly. Add tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136509 91177308-0d34-0410-b5e6-96231b3b80d8
Fill in the missing fixed bits and the register operand bits of the instruction
encoding. Refactor the definition to make the mode explicit, which is
consistent with how loads and stores are normally represented and makes
parsing much easier. Add parsing aliases for pseudo-instruction variants.
Update the disassembler for the new representations. Add tests for parsing and
encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136479 91177308-0d34-0410-b5e6-96231b3b80d8
Later passes /are/ using this information when running the register
scavenger.
This fixes the second problem in PR10520.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136440 91177308-0d34-0410-b5e6-96231b3b80d8
This hidden llc option runs the machine code verifier after expanding
ARM pseudo-instructions, but before if-conversion.
The machine code verifier is much better at pointing out liveness errors
that can trip up the register scavenger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136439 91177308-0d34-0410-b5e6-96231b3b80d8
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136433 91177308-0d34-0410-b5e6-96231b3b80d8
Add parsing support for BLX (immediate). Since the register operand version is
predicated and the label operand version is not, we have to use some special
handling to get the operand list right for matching.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136406 91177308-0d34-0410-b5e6-96231b3b80d8
Add parsing support that handles converting the lsb+width source into the
odd way we represent the instruction (an inverted bitfield mask).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136399 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM*AsmPrinter.
GenLibDeps.pl fails to detect vtable references. As this is the only
referenced symbol from LLVM*Desc to LLVM*AsmPrinter on optimized
builds, the algorithm that creates the list of libraries to be linked
into tools doesn't know about the dependency and sometimes places the
libraries on the wrong order, yielding error messages like this:
../../lib/libLLVMARMDesc.a(ARMMCTargetDesc.cpp.o): In function
`llvm::ARMInstPrinter::ARMInstPrinter(llvm::MCAsmInfo const&)':
ARMMCTargetDesc.cpp:(.text._ZN4llvm14ARMInstPrinterC1ERKNS_9MCAsmInfoE
[llvm::ARMInstPrinter::ARMInstPrinter(llvm::MCAsmInfo
const&)]+0x2a): undefined reference to `vtable for
llvm::ARMInstPrinter'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136328 91177308-0d34-0410-b5e6-96231b3b80d8
This can happen in cases where TableGen generated asm matcher cannot check
whether a register operand is in the right register class. e.g. mem operands.
rdar://8204588
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136292 91177308-0d34-0410-b5e6-96231b3b80d8
Encode the width operand as it encodes in the instruction, which simplifies
the disassembler and the encoder, by using the imm1_32 operand def. Add a
diagnostic for the context-sensitive constraint that the width must be in
the range [1,32-lsb].
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136264 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the rest of the extend instructions to not artificially distinguish
between a rotate of zero and a rotate of any other value. Replace the by-zero
versions with Pat<>'s for ISel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136226 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the SXTB, SXTH, SXTB16, UXTB, UXTH, and UXTB16 instructions to not
have an 'r' and an 'r_rot' version, but just a single version with a rotate
that can be zero. Use plain Pat<>'s for the ISel of the non-rotated version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136225 91177308-0d34-0410-b5e6-96231b3b80d8
Allow the rot_imm operand to be optional. This sets the stage for refactoring
away the "rr" versions from the multiclasses and replacing them with Pat<>s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136154 91177308-0d34-0410-b5e6-96231b3b80d8
Start of cleaning this up a bit. First step is to remove the encoder hook by
storing the operand as the bits it'll actually encode to so it can just be
directly used. Map it to the assembly source values 8/16/24 when we print it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136152 91177308-0d34-0410-b5e6-96231b3b80d8
No intendeded functional change. Just cleaning up a bit to make things more
self-consistent in layout and style.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136095 91177308-0d34-0410-b5e6-96231b3b80d8
The first problem to fix is to stop creating synthetic *Table_gen
targets next to all of the LLVM libraries. These had no real effect as
CMake specifies that add_custom_command(OUTPUT ...) directives (what the
'tablegen(...)' stuff expands to) are implicitly added as dependencies
to all the rules in that CMakeLists.txt.
These synthetic rules started to cause problems as we started more and
more heavily using tablegen files from *subdirectories* of the one where
they were generated. Within those directories, the set of tablegen
outputs was still available and so these synthetic rules added them as
dependencies of those subdirectories. However, they were no longer
properly associated with the custom command to generate them. Most of
the time this "just worked" because something would get to the parent
directory first, and run tablegen there. Once run, the files existed and
the build proceeded happily. However, as more and more subdirectories
have started using this, the probability of this failing to happen has
increased. Recently with the MC refactorings, it became quite common for
me when touching a large enough number of targets.
To add insult to injury, several of the backends *tried* to fix this by
adding explicit dependencies back to the parent directory's tablegen
rules, but those dependencies didn't work as expected -- they weren't
forming a linear chain, they were adding another thread in the race.
This patch removes these synthetic rules completely, and adds a much
simpler function to declare explicitly that a collection of tablegen'ed
files are referenced by other libraries. From that, we can add explicit
dependencies from the smaller libraries (such as every architectures
Desc library) on this and correctly form a linear sequence. All of the
backends are updated to use it, sometimes replacing the existing attempt
at adding a dependency, sometimes adding a previously missing dependency
edge.
Please let me know if this causes any problems, but it fixes a rather
persistent and problematic source of build flakiness on our end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136023 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the Rn register encoding for both SSAT and USAT. Update the parsing of the
shift operand to correctly handle the allowed shift types and immediate ranges
and issue meaningful diagnostics when an illegal value or shift type is
specified. Add aliases to parse an ommitted shift operand (default value of
'lsl #0').
Add tests for diagnostics and proper encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135990 91177308-0d34-0410-b5e6-96231b3b80d8
The shift immediate encoding, printing, etc. is handled directly by the
enclosing operand definition, so it should be a vanilla immediate, not a
nested complex operand (shift_imm).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135968 91177308-0d34-0410-b5e6-96231b3b80d8
Remove some inititalizers that are the same as the default, move defs next to
their (singular) uses and generally simplify some formatting of asm operand
definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135946 91177308-0d34-0410-b5e6-96231b3b80d8
The immediate is in the range 1-32, but is encoded as 0-31 in a 5-bit bitfield.
Update the representation such that we store the operand as 0-31, allowing us
to remove the encoder method and the special case handling in the disassembler.
Update the assembly parser and the instruction printer accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135823 91177308-0d34-0410-b5e6-96231b3b80d8
Aliases for LDM/STM. The single-register versions should encode to LDR/STR
with writeback, but we don't (yet) get that correct. Neither does Darwin's
system assembler, though, so that's not a deal-breaker of a limitation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135702 91177308-0d34-0410-b5e6-96231b3b80d8
Move the shift operator and special value (32 encoded as 0 for PKHTB) handling
into the instruction printer. This cleans up a bit of the disassembler
special casing for these instructions, more easily handles not printing the
operand at all for "lsl #0" and prepares for correct asm parsing of these
operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135626 91177308-0d34-0410-b5e6-96231b3b80d8
Move common definitions for ARM and Thumb2 into ARMInstrFormats.td and rename
them to be a bit more descriptive that they're for the PKH instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135617 91177308-0d34-0410-b5e6-96231b3b80d8
The shift type is implied by the instruction (PKHBT vs. PKHTB) and so shouldn't
be also encoded as part of the shift value immediate. Otherwise we're able to
represent invalid instructions, plus it needlessly complicates the
representation. Preparatory work for asm parsing of these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135616 91177308-0d34-0410-b5e6-96231b3b80d8
- Introduce JITDefault code model. This tells targets to set different default
code model for JIT. This eliminates the ugly hack in TargetMachine where
code model is changed after construction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135580 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLoweringObjectFileImpl down to MCObjectFileInfo.
TargetAsmInfo is done to one last method. It's *almost* gone!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135569 91177308-0d34-0410-b5e6-96231b3b80d8
The system register spec should be case insensitive. The preferred form for
output with mask values of 4, 8, and 12 references APSR rather than CPSR.
Update and tidy up tests accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135532 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the parser to recognize the APSR and SPSR system register names. Add
and update tests accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135527 91177308-0d34-0410-b5e6-96231b3b80d8
Correct the handling of the 's' suffix when parsing ARM mode. It's only a
truly separate opcode in Thumb. Add test cases to make sure we handle
the s and condition suffices correctly, including diagnostics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135513 91177308-0d34-0410-b5e6-96231b3b80d8
Add range checking for the immediate operand and handle the "mov" mnemonic
choosing between encodings based on the value of the immediate. Add tests
for fixups, encoding choice and values, and diagnostic for out of range values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135500 91177308-0d34-0410-b5e6-96231b3b80d8
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135468 91177308-0d34-0410-b5e6-96231b3b80d8
to MCRegisterInfo. Also initialize the mapping at construction time.
This patch eliminate TargetRegisterInfo from TargetAsmInfo. It's another step
towards fixing the layering violation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135424 91177308-0d34-0410-b5e6-96231b3b80d8
Original Log: Get rid of the separate opcodes for the Darwin versions of tBL, tBLXi, and tBLXr, using pseudo-instructions to lower to the single final opcode. Update the ARM disassembler for this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135414 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC decorates (and distinguishes) "const" in mangler. It brought linkage error between "extern const" declarations and definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135269 91177308-0d34-0410-b5e6-96231b3b80d8
backend. Moved some MCAsmInfo files down into the MCTargetDesc
sublibraries, removed some (i suspect long) dead files from other parts
of the CMake build, etc. Also copied the include directory hack from the
Makefile.
Finally, updated the lib deps. I spot checked this, and think its
correct, but review appreciated there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135234 91177308-0d34-0410-b5e6-96231b3b80d8
Consolidate the individual declarations together for ease of reference. This
mirrors the organization in X86, as well, so is good for consistency. No
functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135179 91177308-0d34-0410-b5e6-96231b3b80d8
ldm/stm are the cannonical spellings for ldmia/stmia, so use them as such.
Update the parsing/encoding tests accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135168 91177308-0d34-0410-b5e6-96231b3b80d8
Flesh out the options supported for the instruction. Shuffle tests a bit and
add entries for the rest of the options. Add an alias to handle the default
operand of "sy".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135109 91177308-0d34-0410-b5e6-96231b3b80d8
Catch potential cascading errors on a malformed so_reg operand and bail after
the first error.
Add some tests for the diagnostics we do want.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135055 91177308-0d34-0410-b5e6-96231b3b80d8
Now works for parsing register shifted register and register shifted
immediate arithmetic instructions, including the 'rrx' rotate with extend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135049 91177308-0d34-0410-b5e6-96231b3b80d8
Update the debug output interface for MCParsedAsmOperand to have a print()
method which takes an output stream argument, an << operator which invokes
the print method using the given stream, and a dump() method which prints
the operand to the dbgs() stream. This makes the interface more consistent
with the rest of LLVM, and more convenient to use at the debugger command
line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135043 91177308-0d34-0410-b5e6-96231b3b80d8
if (x != 0) x = 1
if (x == 1) x = 1
Previous codegen looks like this:
mov r1, r0
cmp r1, #1
mov r0, #0
moveq r0, #1
The naive lowering select between two different values. It should recognize the
test is equality test so it's more a conditional move rather than a select:
cmp r0, #1
movne r0, #0
rdar://9758317
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135017 91177308-0d34-0410-b5e6-96231b3b80d8
an assert on Darwin llvm-gcc builds.
Assertion failed: (castIsValid(op, S, Ty) && "Invalid cast!"), function Create, file /Users/buildslave/zorg/buildbot/smooshlab/slave-0.8/build.llvm-gcc-i386-darwin9-RA/llvm.src/lib/VMCore/Instructions.cpp, li\
ne 2067.
etc.
http://smooshlab.apple.com:8013/builders/llvm-gcc-i386-darwin9-RA/builds/2354
--- Reverse-merging r134893 into '.':
U include/llvm/Target/TargetData.h
U include/llvm/DerivedTypes.h
U tools/bugpoint/ExtractFunction.cpp
U unittests/Support/TypeBuilderTest.cpp
U lib/Target/ARM/ARMGlobalMerge.cpp
U lib/Target/TargetData.cpp
U lib/VMCore/Constants.cpp
U lib/VMCore/Type.cpp
U lib/VMCore/Core.cpp
U lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Instrumentation/ProfilingUtils.cpp
U lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/CodeGen/SjLjEHPrepare.cpp
--- Reverse-merging r134888 into '.':
G include/llvm/DerivedTypes.h
U include/llvm/Support/TypeBuilder.h
U include/llvm/Intrinsics.h
U unittests/Analysis/ScalarEvolutionTest.cpp
U unittests/ExecutionEngine/JIT/JITTest.cpp
U unittests/ExecutionEngine/JIT/JITMemoryManagerTest.cpp
U unittests/VMCore/PassManagerTest.cpp
G unittests/Support/TypeBuilderTest.cpp
U lib/Target/MBlaze/MBlazeIntrinsicInfo.cpp
U lib/Target/Blackfin/BlackfinIntrinsicInfo.cpp
U lib/VMCore/IRBuilder.cpp
G lib/VMCore/Type.cpp
U lib/VMCore/Function.cpp
G lib/VMCore/Core.cpp
U lib/VMCore/Module.cpp
U lib/AsmParser/LLParser.cpp
U lib/Transforms/Utils/CloneFunction.cpp
G lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Utils/InlineFunction.cpp
U lib/Transforms/Instrumentation/GCOVProfiling.cpp
U lib/Transforms/Scalar/ObjCARC.cpp
U lib/Transforms/Scalar/SimplifyLibCalls.cpp
U lib/Transforms/Scalar/MemCpyOptimizer.cpp
G lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/Transforms/IPO/ArgumentPromotion.cpp
U lib/Transforms/InstCombine/InstCombineCompares.cpp
U lib/Transforms/InstCombine/InstCombineAndOrXor.cpp
U lib/Transforms/InstCombine/InstCombineCalls.cpp
U lib/CodeGen/DwarfEHPrepare.cpp
U lib/CodeGen/IntrinsicLowering.cpp
U lib/Bitcode/Reader/BitcodeReader.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134949 91177308-0d34-0410-b5e6-96231b3b80d8
Print shifted immediate values directly rather than as a payload+shifter
value pair. This makes for more readable output assembly code, simplifies
the instruction printer, and is consistent with how Thumb immediates are
displayed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134902 91177308-0d34-0410-b5e6-96231b3b80d8
and MCSubtargetInfo.
- Added methods to update subtarget features (used when targets automatically
detect subtarget features or switch modes).
- Teach X86Subtarget to update MCSubtargetInfo features bits since the
MCSubtargetInfo layer can be shared with other modules.
- These fixes .code 16 / .code 32 support since mode switch is updated in
MCSubtargetInfo so MC code emitter can do the right thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134884 91177308-0d34-0410-b5e6-96231b3b80d8
CPU, and feature string. Parsing some asm directives can change
subtarget state (e.g. .code 16) and it must be reflected in other
modules (e.g. MCCodeEmitter). That is, the MCSubtargetInfo instance
must be shared.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134795 91177308-0d34-0410-b5e6-96231b3b80d8
The normal tBX instruction is predicable, so there's no reason the
pseudos for using it as a return shouldn't be. Gives us some nice code-gen
improvements as can be seen by the test changes. In particular, several
tests now have to disable if-conversion because it works too well and defeats
the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134746 91177308-0d34-0410-b5e6-96231b3b80d8
Hook up the TableGen lowering for simple pseudo instructions for ARM and
use it for a subset of the many pseudos the backend has as proof of concept.
More conversions to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134705 91177308-0d34-0410-b5e6-96231b3b80d8
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134678 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to remove the (bogus and unneeded) encoding information from
the pseudo-instruction class definitions. All of the pseudos that haven't
been converted yet and still need encoding information instance from the normal
instruction classes and explicitly set isCodeGenOnly, and so are distinct
from this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134540 91177308-0d34-0410-b5e6-96231b3b80d8
Pseudo-instructions don't have encoding information, as they're lowered
to real instructions by the time we're doing binary encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134533 91177308-0d34-0410-b5e6-96231b3b80d8
If the function allocates reserved stack space for callee argument frames,
estimateStackSize() needs to account for that, as it doesn't show up as
ordinary frame objects. Otherwise, a callee with a large argument list will
throw off the calculations for whether to allocate an emergency spill slot
and we get assert() failures in the register scavenger.
rdar://9715469
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134415 91177308-0d34-0410-b5e6-96231b3b80d8
The DSP instructions in the Thumb2 instruction set are an optional extension
in the Cortex-M* archtitecture. When present, the implementation is considered
an "ARMv7E-M implementation," and when not, an "ARMv7-M implementation."
Add a subtarget feature hook for the v7e-m instructions and hook it up. The
cortex-m3 cpu is an example of a v7m implementation, while the cortex-m4 is
a v7e-m implementation.
rdar://9572992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134261 91177308-0d34-0410-b5e6-96231b3b80d8
itineraries.
- Refactor TargetSubtarget to be based on MCSubtargetInfo.
- Change tablegen generated subtarget info to initialize MCSubtargetInfo
and hide more details from targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134257 91177308-0d34-0410-b5e6-96231b3b80d8
t2MOVCC[ri] are just t2MOV[ri] instructions, so properly pseudo-ize them.
The Thumb1 versions, tMOVCC[ri] were only present for use by the size-
reduction pass, so they're no longer necessary at all and can be deleted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134242 91177308-0d34-0410-b5e6-96231b3b80d8
Merge the tMOVr, tMOVgpr2tgpr, tMOVtgpr2gpr, and tMOVgpr2gpr instructions
into tMOVr. There's no need to keep them separate. Giving the tMOVr
instruction the proper GPR register class for its operands is sufficient
to give the register allocator enough information to do the right thing
directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134204 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a FIXME and allow predication (in Thumb2) for the T1 register to
register MOV instructions. This allows some better codegen with
if-conversion (as seen in the test updates), plus it lays the groundwork
for pseudo-izing the tMOVCC instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134197 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a call to a special helper function. Get rid of the T2 variant
entirely, as it's identical to the Thumb1 version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134178 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a t2LDMIA_UPD instruction with extra codegen properties, so it
doesn't need the encoding information. As a side-benefit, we now correctly
recognize for instruction printing as a 'pop' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134173 91177308-0d34-0410-b5e6-96231b3b80d8
It's just a tPOP instruction with additional code-gen properties, so it
doesn't need encoding information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134172 91177308-0d34-0410-b5e6-96231b3b80d8
tADDrSPi is not predicable, so we can't size-reduce a t2ADDri to it if the
predicate is anything other than "always."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134130 91177308-0d34-0410-b5e6-96231b3b80d8
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134127 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike Thumb1, Thumb2 does not have dedicated encodings for adjusting the
stack pointer. It can just use the normal add-register-immediate encoding
since it can use all registers as a source, not just R0-R7. The extra
instruction definitions are just duplicates of the normal instructions with
the (not well enforced) constraint that the source register was SP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134114 91177308-0d34-0410-b5e6-96231b3b80d8
already makes the assumption, which is correct on ARM, that a type's alignment is
less than its alloc size. This improves codegen with Clang (which inserts a lot of
extraneous alignment specifiers) and fixes <rdar://problem/9695089>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134106 91177308-0d34-0410-b5e6-96231b3b80d8
The tSpill and tRestore instructions are just copies of the tSTRspi and
tLDRspi instructions, respectively. Just use those directly instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134092 91177308-0d34-0410-b5e6-96231b3b80d8
sink them into MC layer.
- Added MCInstrInfo, which captures the tablegen generated static data. Chang
TargetInstrInfo so it's based off MCInstrInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134021 91177308-0d34-0410-b5e6-96231b3b80d8
When the destination operand is the same as the first source register
operand for arithmetic instructions, the destination operand may be omitted.
For example, the following two instructions are equivalent:
and r1, #ff
and r1, r1, #ff
rdar://9672867
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133973 91177308-0d34-0410-b5e6-96231b3b80d8
Correctly parse the forms of the Thumb mov-immediate instruction:
1. 8-bit immediate 0-255.
2. 12-bit shifted-immediate.
The 16-bit immediate "movw" form is also legal with just a "mov" mnemonic,
but is not yet supported. More parser logic necessary there due to fixups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133966 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb2 MOV mnemonic can accept both cc_out and predication. We don't (yet)
encode the instruction properly, but this gets the parsing part.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133945 91177308-0d34-0410-b5e6-96231b3b80d8
Add aliases for the vpush/vpop mnemonics to the VFP load/store multiple
writeback instructions w/ SP as the base pointer.
rdar://9683231
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133932 91177308-0d34-0410-b5e6-96231b3b80d8
When the destination operand is the same as the first source register
operand for arithmetic instructions, the destination operand may be omitted.
For example, the following two instructions are equivalent:
sub r2, r2, #6
sub r2, #6
rdar://9682597
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133925 91177308-0d34-0410-b5e6-96231b3b80d8
Move the target-specific RecordRelocation logic out of the generic MC
MachObjectWriter and into the target-specific object writers. This allows
nuking quite a bit of target knowledge from the supposedly target-independent
bits in lib/MC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133844 91177308-0d34-0410-b5e6-96231b3b80d8
The fixup value comes in as the whole 32-bit value, so for the lo16 fixup,
the upper bits need to be masked off. Previously we assumed the masking had
already been done and asserted.
rdar://9635991
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133818 91177308-0d34-0410-b5e6-96231b3b80d8
instructions can be used to match combinations of multiply/divide and VCVT
(between floating-point and integer, Advanced SIMD). Basically the VCVT
immediate operand that specifies the number of fraction bits corresponds to a
floating-point multiply or divide by the corresponding power of 2.
For example, VCVT (floating-point to fixed-point, Advanced SIMD) can replace a
combination of VMUL and VCVT (floating-point to integer) as follows:
Example (assume d17 = <float 8.000000e+00, float 8.000000e+00>):
vmul.f32 d16, d17, d16
vcvt.s32.f32 d16, d16
becomes:
vcvt.s32.f32 d16, d16, #3
Similarly, VCVT (fixed-point to floating-point, Advanced SIMD) can replace a
combinations of VCVT (integer to floating-point) and VDIV as follows:
Example (assume d17 = <float 8.000000e+00, float 8.000000e+00>):
vcvt.f32.s32 d16, d16
vdiv.f32 d16, d17, d16
becomes:
vcvt.f32.s32 d16, d16, #3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133813 91177308-0d34-0410-b5e6-96231b3b80d8
target machine from those that are only needed by codegen. The goal is to
sink the essential target description into MC layer so we can start building
MC based tools without needing to link in the entire codegen.
First step is to refactor TargetRegisterInfo. This patch added a base class
MCRegisterInfo which TargetRegisterInfo is derived from. Changed TableGen to
separate register description from the rest of the stuff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133782 91177308-0d34-0410-b5e6-96231b3b80d8
1. (((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8)
=> (bswap x) >> 16
2. ((x&0xff)<<8)|((x&0xff00)>>8)|((x&0xff000000)>>8)|((x&0x00ff0000)<<8))
=> (rotl (bswap x) 16)
This allows us to eliminate most of the def : Pat patterns for ARM rev16
revsh instructions. It catches many more cases for ARM and x86.
rdar://9609108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133503 91177308-0d34-0410-b5e6-96231b3b80d8
